ÇGÇiğdem Özer Genç

Çiğdem Özer Genç

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Çiğdem Özer Genç has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A GIS-Based Multicriteria Approach to Identifying Suitable Forest Depot Sites: A Case Study from Northern Türkiye

    by Cigdem Ozer Genc

    Natural disasters, particularly floods and landslides, can cause severe losses; however, their impacts can be significantly mitigated through proactive planning. In August 2021, a devastating flood in northern Türkiye resulted in major damage, including the displacement of logs from the Ayancık Forest Management Directorate’s depot, which exacerbated the disaster’s effects. This study aims to identify the most suitable location for a new forest depot in Ayancık, considering disaster risk, logistical needs, and environmental factors. A hybrid geospatial approach was employed by integrating Logistic Regression (LR)-based landslide susceptibility modeling and the Analytic Hierarchy Process (AHP). Key conditioning factors such as altitude, slope, aspect, lithology, land cover, plan and profile curvature, topographic wetness index (TWI), distance to drainage networks, roads, and faults were used to produce the LSM. The AHP weights of the factors used in selecting a suitable depot location were determined based on expert opinions. The integration of physical, logistical, and risk-based parameters allowed for a spatial prioritization of suitable areas. Results indicate that approximately 10.69% of the study area is classified as class 1 (very high suitability), 16.59% as class 2 (high), 20.71% as class 3 (moderate), 23.34% as class 4 (low), and 28.67% as class 5 (very low), corresponding to 27.28% of the area in classes 1–2 and 52.01% in classes 4–5. These results indicate that the study area is predominantly characterized by medium-low suitability conditions. Notably, these areas show significantly lower flood and landslide susceptibility compared to the current depot sites. By aligning forest infrastructure planning with disaster resilience principles, this study offers a replicable model for sustainable forest depot site selection. The findings provide valuable guidance for forest managers and policymakers to enhance the safety, functionality, and long-term viability of forestry operations in hazard-prone regions.


  • Open Access

    Assessment of Forest Road Networks for Landslide Susceptibility

    by Cigdem Ozer Genc, Halil Akinci, Cem Kilicoglu, Burak Aricak, Sedat Dogan

    Landslides, which usually occur in mountainous and hilly areas, occur as a result of the soil or rock material forming a slope moving down under the influence of gravity. Forested areas, mostly in mountainous regions, are susceptible to landslides. Forest roads are important infrastructure facilities to protect forest resources and to achieve sustainable management objectives. Forest roads provide many benefits such as facilitating the transportation of wood raw materials, preventing fires and providing access to areas where recreational activities are carried out. However, inappropriately opened forest roads in forest areas cause problems such as landslides, which cause both serious destruction of road networks and serious deformations in forest areas. Landslide-prone forest roads also cause serious economic losses due to disruption of product transport and road maintenance costs. Within the scope of this study, landslide susceptibility maps (LSMs) were produced to determine the relationship between landslides and landslide-causing factors in Handüzü Forest Management Unit of Kastamonu Regional Directorate of Forestry (KRDF) located in the Central Black Sea Region of Türkiye. Land use, altitude, slope, aspect, plan and profile curvature, topographic wetness index (TWI), distance to forest road, drainage networks and fault, crown closure and lithology were used as conditioning factors in the study. Logistic Regression (LR) and Support Vector Machine (SVM) based machine learning models were used to generate LSMs. The receiver operating characteristics (ROC) curve and area under the ROC curve (AUC) method were used to compare the performance of landslide susceptibility models. In the accuracy assessment using the prediction rate curve, the AUC value was 0.968 for the SVM model and 0.668 for the LR model. The AUC values confirmed that SVM performed much better than LR. In addition, the susceptibility of newly planned forest roads (not currently available in the field) in LSMs were determined in the study. As a result of the study, it was determined that the most effective factors affecting landslides in Handüzü Forest Management Directorate are distance to forest roads and drainage networks. In the analyses, it was found that 28.28% of the existing forest roads in the LSM produced with SVM and 56.57% in the LSM produced with LR were found to be in »high« and »very high« landslide susceptible areas. Similarly, 38.43% of the newly planned roads in the LSM produced with SVM and 52.23% in the LSM produced with LR were found to be in »high« and »very high« landslide susceptible areas. These findings showed that forest roads are the main factor in the occurrence of landslides in the study area. Therefore, taking LSMs into account in the planning of forest roads will contribute to reducing the damages that may occur in forest areas due to landslides.

  • Open Access

    Modern Ormancılıkta Kabuk Soyma Uygulamasının Değerlendirilmesi: Daday Orman İşletme Müdürlüğü, Mobil Makineli Kabuk Soyma Makinesi Örneği

    by Çiğdem Özer Genç

    Bu çalışmada, Kastamonu Orman Bölge Müdürlüğü Daday Orman İşletme Müdürlüğü Beykoz Orman Şefliği’nde karaçam odun üretiminde mobil kabuk soyma makinesi ve motorlu testere ile kabuk soyma süreci karşılaştırılarak zaman ve kalite açısından performanslarının değerlendirilmesi amaçlanmıştır. Bu amaçla kronometre sıfırlama yöntemiyle zaman ölçme tekniği kullanılarak benzer çap ve boylardaki kağıtlık, tomruk ve maden direk odun sınıflarının kabuk soyma iş-zaman analizi yapılmıştır. Çalışma sonucunda mobil kabuk soyma makinesi ve motorlu testereye takılan kabuk soyma aparatı ile kabuk soyma süreleri belirlenmiş ve performansları ortaya konulmuştur. Mobil kabuk soyma makinesi ile yapılan kabuk soyma işleminde motorlu testereye göre odun hacmi dikkate alındığında yaklaşık 2,4 kat, soyma alanı dikkate alındığında 2,3 kat, kabuk hacmi dikkate alındığında 2,6 kat daha yüksek verimle çalışılmıştır. Mobil kabuk soyma makinesinin motorlu testereye göre daha kısa sürede ve daha fazla soyma kapasitesi ile daha üstün olduğu belirlenmiştir.

  • Open Access

    Determination of social perception of the role of forest fire break roads and fire lanes in fire prevention

    by Çiğdem Özer Genç, Kadir Can Demirci

    Background and Aims As in many countries, forest fires are one of the leading factors that jeopardize the sustainable management of forests in our country. To prevent forest fires, firebreak roads and fire lanes have been established to contain fires early and limit their spread. Therefore, establishing forest fire break roads and fire lanes to protect forests from fire is important in protective, preventive, and fire extinguishing works. Methods This study explores public awareness of the role of firebreak roads and fire lanes in forest fire prevention. It investigates knowledge levels regarding their effectiveness in combating wildfires. The research aligns with the responsibilities in Article 170 of the Constitution, promoting state-public cooperation in forest protection. The study was conducted in the Kastamonu central district and rural neighborhoods of the central district. A literature review was conducted, and survey questions were developed. The number of people to be surveyed was statistically determined as 97 at a 95% confidence level and 10% margin of error using sample size determination methods. The participants' knowledge level about forest roads, forest fire break roads and fire lanes. Their perceptions about the prevention of forest fires by these facilities were determined. Results As a result of the study, it is revealed that people's knowledge about forest fires breaking roads and fire lanes needs to be increased, and awareness should be raised. Conclusions It is essential to know about forest fires, break roads, and fire lanes to act safely, quickly, and effectively in preventing and fighting forest fires.

  • Monitoring the operational changes in surface reflectances after logging, based on popular indices over Sentinel-2, Landsat-8, and ASTER imageries

    by Çiğdem Özer Genç, Arif Oğuz Altunel

    Revealing the status of forests is important for sustainable forest management. The basis of the concept lies in meeting the needs of future generations and today’s generations in the management of forests. The use of remote-sensing (RS) technologies and geographic information systems (GIS) techniques in revealing the current forest structure and in long-term planning of forest areas with multipurpose planning techniques is increasing day by day. Significant technological advances are in allowing programmers to modernize how they manage data. Sentinel-2, which is a relatively new addition to Earth observing satellites, is a new-generation satellite that has enabled classification and monitoring of land cover change with high precision at ease. Visible R, G, B, and near-infrared (NIR) bands have offered exceptional 10-m spatial reasolution, making them suitable for vegetation monitoring along with the additional 20-m bands to spare especially in chlorophyll content analyses. On the contrary, Landsat-8 and ASTER which have been longer lasting in Earth observation were rougher results especially in forestry studies. In this study, Landsat-8 and ASTER satellite images were compared against the Sentinel-2 images as a reference in conjunction with GIS techniques to monitor and assess the impact of various logging procedures, including selective logging and regeneration silviculture. The investigation employed a range of plant vegetation indices, including NDVI, GNDVI, and SAVI, to evaluate the efficacy of image resolution in detecting forest cover changes in the Kastamonu region, where the timber production is the hightest in Turkey. For selective and regeneration activities, satellite images were taken pre-harvesting and immediately post-harvesting, and index maps were produced. NDVI, GNDVI, and SAVI indices were the most accurate indicators of green vegetation change in the Sentinel-2A imagery. Similarly, for the Landsat-8 imagery, the SAVI, NDVI, and GNDVI indices were found to be satisfactory indicators. As for ASTER imagery, the success sequance was like SAVI, GNDVI, and NDVI. Based on the findings of this study, it has been noted that the ASTER imagery closeness to Sentinel-2A was more remarkable in detecting changes in green vegetation in forested areas. The data derived from ASTER imageries demonstrated superior efficacy compared to Landsat-8 in generating forest cover maps, owing to their proximity to those produced by Sentinel-2. The findings also indicated that ASTER imagery, with suitable spatial and spectral resolution, could still be utilized as efficienly as Landsats to generate forest cover density maps and monitor long-term forest conservation practices, particularly in professionally managed forests. Thus, this methodology demonstrated the capacity for efficient worldwide forest management.


  • Open Access

    Impact of forestry operations on forest soil respiration depending on stands features in Kastamonu, Turkiye

    by Çiğdem Özer Genç, Burak Aricak

    Background: Harvesting, especially skidding operations have a significant impact on the forest soil properties. This study aimed to advance understanding of how timber harvesting may influence soil respiration in forested ecosystems. We investigated the impact of soil respiration for some of the skidding techniques after skidding operations depending on slope and stand types.

  • Effect of timber harvesting techniques and slopes on soil respiration of young and mature black pine stands in northwestern Türkiye

    by Çiğdem Özer Genç, Temel Sarıyıldız, Burak Arıcak

    Releases of CO2 from forest soils was studied relative to different timber harvesting techniques, slope classes, and stand age. Three timber harvesting techniques (suspended skidding (SS), skidding by using a skidding cone (SC), and cable-pulling (CP)) were used in young and mature black pine stands at three different slopes (0 to 20% – S1, 20% to 33% – S2, and > 33% – S3). Soil respiration measurements were carried out at five-day intervals (1st, 5th, and 10th day) and 6 months later after the timber harvesting techniques. The soil respiration increased on the first day, decreased on the 5th and 10th days, and reached its lowest level on the 6th month. The SC technique in the young stands showed the highest soil respiration value on the slopes indicating that the cone placed on the head of the log during the skidding operations does not deform the soil. In the mature stands, all timber harvesting techniques and the undisturbed sites showed lower values than in the young stands on the S1. On the S2, mean value was higher in the mature stands. In contrast to the young stands, the undisturbed stands had the highest soil respiration.

  • Open Access

    Burn severity evaluation in black pine forests with topographical factors using Sentinel-2 in Kastamonu, Turkiye

    by Çiğdem Özer Genç, Ömer Küçük, Seray Özden Keleş, Sabri Ünal

    The forest fire was more severe in the altitude ranges from 1170 to 1370 m, at 20-33% slope and northerly aspects in our study site. Understanding how topographical factors influence burn severity will provide good knowledge of the fires in the Black Sea region and can guide decision-makers.


  • Developing a Harvest Plan by Considering the Effects of Skidding Techniques on Forest Soil Using a Hybrid TOPSIS-Entropy Method

    by Çiğdem Özer Genç, Burak Arıcak

    The aim of this study was to evaluate skidding techniques, which result in minimal damage to the soil, depending on the slope and stand type. Thus, three skidding techniques with tractor for harvesting (suspended skidding [SS], using a skidding cone [SC], and cable-pulling [CP]) were used in six different study sites and the variations in soil properties were examined at three different slopes (0%–20%, 20%–33%, >33%), 2 different stand types (A, B), and 2 different soil depths (0–5 cm, 5–10 cm). Soil bulk density, soil organic matter, soil compaction, organic carbon (C), and total nitrogen (N) were determined. The Entropy and TOPSIS methods were used among the multiple-criteria decision-making methods for six different coniferous stands. With the combination of the Entropy and TOPSIS methods, we found that slope was an important factor in determining the preferred skidding technique. Suspended skidding was seen as the preferred method of skidding technique in the 0–20% slope group. For the 20%–33% slope group, the usability of the three methods varied depending on stand type and soil depth, whereas the technique using a skidding cone was found to be the preferred skidding technique in the > 33% slope group.


  • Open Access

    Tilia tomentosa‘da Bazı Ağır Metal Konsantrasyonlarının Organ ve Trafik Yoğunluğuna Bağlı Değişimi

    by Ezgi Abacioglu, Hatice Akarsu, Çiğdem Özer Genç, Ayşe Öztürk

    Kirlilik seviyesi, özellikle gelişmekte olan ülkelerde hızlı kentleşme ve enerji tüketiminin artmasıyla birlikte insan sağlığını tehdit eden boyutlara ulaşmıştır. Dünyada her yıl milyonlarca insan hava kirliliği nedeniyle hayatını kaybetmektedir. Ağır metaller, özellikle insan sağlığı açısından kirleticiler arasında ayrı bir öneme sahiptir çünkü, doğada uzun süre bozulmadan kalabilirler, biyolojik olarak birikme eğilimindedirler ve bazıları düşük konsantrasyonlarda bile toksik veya kanserojendir. Bu nedenle, ağır metal kirliliğinin izlenmesi ve riskli alanların belirlenmesi çok önemlidir. Biyomonitörler, ağır metal kirliliğini izlemek için en yaygın kullanılan yöntemdir. Ancak, izlemenin güvenilir olmasını sağlamak için metali izlemek için hangi tür ve organın daha uygun olduğunu belirlemek gerekmektedir. Bu çalışmada, Tilia tomentosa'nın yaprak, tohum ve dallarındaki Ba, Na, Al, B, Ca, Fe, K, Mg ve Mn elementlerinin konsantrasyonlarının trafiğin olmadığı, az yoğun olduğu ve yoğun olduğu alanlardaki değişimlerinin belirlenmesi amaçlanmıştır. Çalışma sonucunda yaprak ve tohumlarda Fe dışındaki ağır metallerin konsantrasyonlarının trafik yoğunluğuna bağlı olarak arttığı belirlenmiştir. Bu durum, trafiğin yoğun olduğu bölgelerde yetişen ıhlamur bireylerinin özellikle yaprak ve tohumları çay olarak tüketildiğinden dolayı, insan sağlığı açısından önemli sorunlara yol açabilir.