Feng Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Feng Liu has a total of 83 co-authors. Here are the top co-authors by number of shared publications:
Haixia Qi
11 shared publicationsXun Wang
7 shared publicationsMin Xu
6 shared publicationsZesheng Song
6 shared publicationsYuqing Yao
School of Chemistry and Chemical Engineering, Nanchang University, Nanchang, 330031, China
5 shared publications- Haixia Qi
School of Chemistry and Chemical Engineering, Nanchang University, Nanchang 330031, China
4 shared publications
Latest Publications
- Open Access
Synthesis and Properties of Semi-Alicyclic Polyimides Based on an Asymmetric Diamine from Renewable Menthofuran
Conventional aromatic polyimides suffer from poor solubility, high water absorption and low visible-light transmittance due to strong interchain charge transfer complex (CTC) interactions, limiting their microelectronic and optoelectronic applications. Here, a novel asymmetric bio-based diamine ENDAP bearing a 3,4,5,6,7,8-hexahydro-2H-2,4a-epoxynaphthalene-3,4-diyl (HEN) alicyclic skeleton was synthesized from menthofuran via a four-step route. ENDAP was polymerized with five commercial dianhydrides to give polyimide films. GPC gave Mn of 3.17–4.68 × 104 and Mw of 4.51–7.94 × 104 Da. These amorphous polyimides, with d-spacings of 4.70–5.49 Å, were mostly soluble in polar aprotic solvents. Water contact angles were 83.3–98.6°, with a minimum water absorption of 0.36% after 48 h. Tg ranged from 164 to 211 °C, the maximum T10 was 451 °C under N2, cutoff wavelengths were 353–388 nm, and maximum T450 of 83.6% and maximum T500 of 86.1%. The HEN skeleton contributes to improved solubility, reduced water absorption and enhanced transparency, likely by weakening CTC interactions and loosening chain packing, as reflected by the enlarged interchain d-spacing, although the extent depends on the dianhydride structure. This work suggests that renewable semi-alicyclic polyimides are potential candidates for microelectronic and optoelectronic applications.
Open AccessSynthesis and Properties of Semi-Alicyclic Polyimides Based on an Asymmetric Diamine from Renewable Menthofuran
Conventional aromatic polyimides suffer from poor solubility, high water absorption and low visible-light transmittance due to strong interchain charge transfer complex (CTC) interactions, limiting their microelectronic and optoelectronic applications. Here, a novel asymmetric bio-based diamine ENDAP bearing a 3,4,5,6,7,8-hexahydro-2H-2,4a-epoxynaphthalene-3,4-diyl (HEN) alicyclic skeleton was synthesized from menthofuran via a four-step route. ENDAP was polymerized with five commercial dianhydrides to give polyimide films. GPC gave Mn of 3.17–4.68 × 104 and Mw of 4.51–7.94 × 104 Da. These amorphous polyimides, with d-spacings of 4.70–5.49 Å, were mostly soluble in polar aprotic solvents. Water contact angles were 83.3–98.6°, with a minimum water absorption of 0.36% after 48 h. Tg ranged from 164 to 211 °C, the maximum T10 was 451 °C under N2, cutoff wavelengths were 353–388 nm, and maximum T450 of 83.6% and maximum T500 of 86.1%. The HEN skeleton contributes to improved solubility, reduced water absorption and enhanced transparency, likely by weakening CTC interactions and loosening chain packing, as reflected by the enlarged interchain d-spacing, although the extent depends on the dianhydride structure. This work suggests that renewable semi-alicyclic polyimides are potential candidates for microelectronic and optoelectronic applications.
- 3 April 2026
- Published by Wiley in Journal of Polymer Science
- Vol. 64 (11) , 2185-2197
High‐Performance N‐Substituted Benzimidazole‐Based Polyimide Films With Low Dielectric Constant and Dielectric Loss
The advancement of microelectronics, sophisticated packaging and flexible electronics demands dielectric materials with high thermal stability, low dielectric constant ( D k ) and low dielectric loss ( D f ). In this work, a novel twisted and asymmetric N‐substituted benzimidazole‐based diamine monomer, 2‐aminobenzyl‐1‐aminobenzylmethyl‐1 H ‐1, 3‐benzimidazole (BIMA) was synthesized via a facile and efficient route. A series of polyimides coded PBI‐ x were prepared by copolymerizing BIMA with commercial 4, 4′‐oxydianiline (ODA) and 4, 4′‐(hexafluoroisopropylidene) diphthalic anhydride (6FDA) at various diamine molar ratios (BIMA: ODA = 0: 100 to 25: 75). The incorporation of the twisted rigid BIMA with large rotation energy barrier effectively reduces molecular chain packing density and increases the fractional free volume, which simultaneously improves both the solubility and dielectric properties of the PBI‐ x . Even at a small loading, the benzimidazole‐imide segments play a significant role in improving dielectric properties ( D k as low as 2.64 and D f as low as 0.0089 at 1 MHz), maintaining good thermal stability ( T g = 287°C–321°C) and good optical transparency (transmittance at 500 nm ranging from 84.7% to 90.3%). These modified copolyimides PBI‐ x demonstrate outstanding overall performance and show promising potential for applications in high‐frequency communication, high‐speed integrated circuits, flexible displays and transparent electronics devices.
- 3 April 2026
- Published by Wiley in Journal of Polymer Science
- Vol. 64 (11) , 2185-2197
High‐Performance N‐Substituted Benzimidazole‐Based Polyimide Films With Low Dielectric Constant and Dielectric Loss
The advancement of microelectronics, sophisticated packaging and flexible electronics demands dielectric materials with high thermal stability, low dielectric constant ( D k ) and low dielectric loss ( D f ). In this work, a novel twisted and asymmetric N‐substituted benzimidazole‐based diamine monomer, 2‐aminobenzyl‐1‐aminobenzylmethyl‐1 H ‐1, 3‐benzimidazole (BIMA) was synthesized via a facile and efficient route. A series of polyimides coded PBI‐ x were prepared by copolymerizing BIMA with commercial 4, 4′‐oxydianiline (ODA) and 4, 4′‐(hexafluoroisopropylidene) diphthalic anhydride (6FDA) at various diamine molar ratios (BIMA: ODA = 0: 100 to 25: 75). The incorporation of the twisted rigid BIMA with large rotation energy barrier effectively reduces molecular chain packing density and increases the fractional free volume, which simultaneously improves both the solubility and dielectric properties of the PBI‐ x . Even at a small loading, the benzimidazole‐imide segments play a significant role in improving dielectric properties ( D k as low as 2.64 and D f as low as 0.0089 at 1 MHz), maintaining good thermal stability ( T g = 287°C–321°C) and good optical transparency (transmittance at 500 nm ranging from 84.7% to 90.3%). These modified copolyimides PBI‐ x demonstrate outstanding overall performance and show promising potential for applications in high‐frequency communication, high‐speed integrated circuits, flexible displays and transparent electronics devices.
- Open Access
Tailoring Properties Through Functionalized Alicyclic Diamine Towards Solution-Processable High-Performance Polyimide Films
A novel fluorinated diamine monomer, 4,4′-((bicyclo[2.2.1]hept- 5-ene-2,3-diylbis (methylene)) bis(oxy))bis(3- (trifluoromethyl) aniline) (NFDA), featuring a tailored alicyclic norbornane core, flexible ether linkages, and pendant trifluoromethyl groups, was successfully synthesized. This monomer was polymerized with six commercial dianhydrides to produce a series of poly(amic acid) precursors, which were subsequently converted into high-performance polyimide (PI) films via a thermal imidization process. The strategic integration of the alicyclic, ether, and fluorinated motifs within the polymer backbone resulted in materials with an exceptional combination of properties. These PI films display outstanding solubility in a wide range of organic solvents, including low-boiling options like chloroform and tetrahydrofuran, highlighting their superior solution processability. The films are amorphous and exhibit remarkable hydrophobicity, evidenced by high water contact angles (up to 109.4°) and minimal water absorption (as low as 0.26%). Furthermore, they possess excellent optical transparency, with a maximum transmittance of 86.7% in the visible region. The materials also maintain robust thermal stability, with 5% mass loss temperatures exceeding 416 °C, and offer a desirable balance of mechanical strength and flexibility. This unique set of attributes, stemming from a rational molecular design, positions these polyimides as highly promising candidates for next-generation flexible electronics and advanced photovoltaics.
Open AccessTailoring Properties Through Functionalized Alicyclic Diamine Towards Solution-Processable High-Performance Polyimide Films
A novel fluorinated diamine monomer, 4,4′-((bicyclo[2.2.1]hept- 5-ene-2,3-diylbis (methylene)) bis(oxy))bis(3- (trifluoromethyl) aniline) (NFDA), featuring a tailored alicyclic norbornane core, flexible ether linkages, and pendant trifluoromethyl groups, was successfully synthesized. This monomer was polymerized with six commercial dianhydrides to produce a series of poly(amic acid) precursors, which were subsequently converted into high-performance polyimide (PI) films via a thermal imidization process. The strategic integration of the alicyclic, ether, and fluorinated motifs within the polymer backbone resulted in materials with an exceptional combination of properties. These PI films display outstanding solubility in a wide range of organic solvents, including low-boiling options like chloroform and tetrahydrofuran, highlighting their superior solution processability. The films are amorphous and exhibit remarkable hydrophobicity, evidenced by high water contact angles (up to 109.4°) and minimal water absorption (as low as 0.26%). Furthermore, they possess excellent optical transparency, with a maximum transmittance of 86.7% in the visible region. The materials also maintain robust thermal stability, with 5% mass loss temperatures exceeding 416 °C, and offer a desirable balance of mechanical strength and flexibility. This unique set of attributes, stemming from a rational molecular design, positions these polyimides as highly promising candidates for next-generation flexible electronics and advanced photovoltaics.
- 13 September 2025
- Published by Elsevier in Carbohydrate Polymers
- Vol. 370, 124401
Bioactive binary Schiff-base hydrogel from chitosan and functional PEGylated dialdehydes: Synthesis and structure-properties correlation
- 13 September 2025
- Published by Elsevier in Carbohydrate Polymers
- Vol. 370, 124401
Bioactive binary Schiff-base hydrogel from chitosan and functional PEGylated dialdehydes: Synthesis and structure-properties correlation
- 27 April 2025
- Published by Elsevier in Journal of Environmental Sciences
- Vol. 161, 241-253
Gold-modified hierarchical ZnO Cellulose flower-like multifunctional membrane for enhanced wastewater treatment: Multifunctional oil/water separation, solar-powered catalytic dye degradation, and antibacterial applications
- 27 April 2025
- Published by Elsevier in Journal of Environmental Sciences
- Vol. 161, 241-253
Gold-modified hierarchical ZnO Cellulose flower-like multifunctional membrane for enhanced wastewater treatment: Multifunctional oil/water separation, solar-powered catalytic dye degradation, and antibacterial applications