Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tao Wen has a total of 98 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Mechanical Characteristics of Gravel-Block Soil Considering Particle Fragmentation Fractals

    by Jiamin Quan, Tao Wen, Yunpeng Yang, Bocheng Zhang

    To investigate the mechanical characteristics of gravel-block soils in the cold regions, four large direct shear tests were designed under different coarse particle contents and three dry density conditions. The stress variations during shearing and the particle fragmentation rate after shearing were measured. The experimental results indicate that when p5 (the proportion of particles larger than 5 mm) ≥ 40%, the samples exhibit strain hardening behavior, and the stress–strain curve does not exhibit a peak within the range of the tests. The rock fragment skeleton exhibits excellent deformation resistance. With increasing coarse particle content, the internal friction angle of the soil initially decreases and then increases, while the cohesion initially decreases and then increases. Moreover, with increasing initial dry density, both the cohesion and internal friction angle of the gravel-block soils gradually increase. The fractal dimension increases with the increase in the particle fragmentation rate, indicating that the fractal dimension can also represent the degree of particle fragmentation in the soil. The relative fractal dimension increases exponentially with the increase in coarse particle content, indicating that the coarse particle content has a significant impact on the degree of particle fragmentation of gravel-block soils. The higher the coarse particle content, the greater the degree of particle fragmentation of gravel-block soils. When the coarse particle content increases from 0% to 60%, the fractal dimension decreases from 2.825 to 2.555, and the shear strength of the gravel-block soils continuously improves. During the shear process, the gravel-block soils transition from poor grading to well grading, with coarse particles breaking and fine particles filling the gaps between the coarse particles, resulting in a reduction in soil porosity and an increase in particle fragmentation rate and fractal dimension. The research outcomes of this experimental study provide guidance for the study of debris-covered slope landslides in cold regions.


  • Open Access

    Multi-Source Remote Sensing Investigation of Spatiotemporal Deformation and Mechanisms of the Pangcun Giant Accumulation Landslide, Southeastern Tibet

    by Yankun Wang, Mengxue Wei, Li Yue, Jingjing Shi, Tao Wen

    The geological environment of southeastern Tibet is characterized by complex tectonics and high climatic sensitivity, and giant accumulation landslides pose significant threats to infrastructure and human safety. This study investigates the Pangcun giant accumulation landslide using SBAS-InSAR (2017–2024), UAV photogrammetry, field investigations, and wavelet coherence analysis to examine its deformation and driving mechanisms. The landslide exhibits continuous, slow deformation with clear spatial heterogeneity, divided into two zones, with the largest displacement occurring in the middle of Zone B. Field evidence is consistent with the InSAR results. Wavelet coherence analysis reveals a lagged response of displacement to precipitation at a timescale of about three months. The landslide’s evolution is controlled by unfavorable topography and fragmented materials, with precipitation as the primary trigger. Human activities (agricultural irrigation and slope-toe road excavation) and seismic disturbances also contribute to its progressive development.

  • Open Access

    Deformation Characteristics of Lumei Landslide in the Tibetan Plateau Combined with PS-InSAR and SBAS-InSAR

    by Tao Wen, Xueqing Shi, Yankun Wang, Yunpeng Yang

    Due to the highly complex geological environment of the Tibetan Plateau, landslides occur frequently, and signs of ancient landslide reactivation are widespread, posing significant threats to major infrastructure and local communities. Taking the Lumei landslide in Cuomei County as a case study, detailed field investigations were conducted, and Sentinel-1A SAR data (84 scenes from January 2017 to December 2023) were collected to characterize surface deformation. Both PS-InSAR and SBAS-InSAR methods were applied for long-term time-series monitoring, and the results of the two techniques were comparatively analyzed. Furthermore, the influencing factors of landslide deformation were explored on the basis of analyzing the deformation characteristics. The findings reveal that the surface deformation rate exhibits significant spatial heterogeneity, with deformation values decreasing progressively outward from the central region. The surface deformation rates obtained from PS-InSAR and SBAS-InSAR range from −36.55 to −21.81 mm/yr and from −30 to −10 mm/yr, respectively. Both methods indicate a general subsidence trend along the line-of-sight (LOS) direction and show strong spatial consistency and high correlation. By combining the high-precision point results obtained from PS-InSAR and the spatially continuous surface results derived from SBAS-InSAR, the fine spatial deformation characteristics of the Lumei landslide are revealed. The research results can provide an important reference for landslide monitoring, disaster prevention and mitigation in this region.


  • Open Access

    Rock Brittleness Prediction with BDEGTO-Optimized XGBoost

    by Yajuan Wu, Tao Wen, Ruozhao Wang, Yunpeng Yang, Xiaohong Xu

    Precise assessment of rock brittleness is a prerequisite for effective wellbore integrity and successful reservoir stimulation in drilling programs. To achieve precise prediction of rock brittleness index (BI), this study proposes an improved optimization algorithm for an artificial gorilla troops optimizer (GTO), called a Bernoulli Differential Evolution Gorilla Troops Optimizer (BDEGTO). In the BDEGTO, Bernoulli mapping is introduced during the population initialization process, and the differential evolution is embedded after the exploration stage of the GTO. These modifications effectively address the early-stage optimization weaknesses and the susceptibility to local optima that are commonly encountered in a traditional GTO. To evaluate the performance of the BDEGTO, comparisons are made with other optimization algorithms based on 91 datasets from 32 rock types. The results demonstrate the significant advantages of the BDEGTO over other algorithms. Furthermore, the BDEGTO is applied to the optimization process of Least Squares Boosting (LSB), Extreme Gradient Boosting (XGB), and Light Gradient Boosting Machine (LGBM). A comparison is made with Support Vector Regression (SVR), Artificial Neural Network (ANN), and Convolutional Neural Network (CNN) algorithms for predicting rock brittleness based on input parameters such as P-wave velocity (Vp), point load index (Is50), and unit weight (UW). The findings indicate that BDEGTO-XGB achieves the best prediction performance for BI. Additionally, through SHapley Additive exPlanations (SHAP) analysis, it is determined that among the three input parameters, Is50 has the most significant influence. These research results provide valuable guidance for the brittleness assessment of similar rocks.


  • A practical sequential method for simulating hydrodynamic pressure-driven landslides

    by Yankun Wang, Yange Li, Tao Wen, Yang Xue, Ningsheng Chen, Luqi Wang

    Hydrodynamic pressure-driven landslides induced by precipitation and reservoir water-level fluctuations are among the most common types worldwide. Accurate multi-physical field simulations are essential for understanding the mechanisms of evolution and for reliably assessing landslide stability. In this study, a novel, practical, and simplified sequential simulation approach is proposed to model the multi-physical processes of hydrodynamic pressure-driven landslides by integrating finite element and finite difference methods. The proposed approach first employs a finite element model to simulate the time-dependent seepage field within the landslide. Subsequently, a customized interface program is developed to transfer the computed seepage field from the finite element model to the finite difference model. Finally, the finite difference model is used to simulate the resulting stress and deformation fields induced by seepage variations, while incorporating the softening effects of rainfall and reservoir water-level fluctuations on the geotechnical parameters of the landslide mass. The framework is validated using a large-scale physical model of a hydrodynamic pressure-driven landslide, and the sensitivity of key geotechnical parameters to cumulative deformation and landslide initiation time is further analyzed. The results highlight the critical role of water-induced shear strength degradation in controlling deformation behavior and landslide stability.


  • Top Cited Papers

    Dry–wet cycle may trigger the catastrophic landslide in Junlian on February 8, 2025

    by Wenjun Jia, Tao Wen, Ningsheng Chen, Raoxi Cui, Qiao Luo