Vladimir M. Kharevich
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Vladimir M. Kharevich has a total of 99 co-authors. Here are the top co-authors by number of shared publications:
- Alena Kharevich
Institute of Archeology and Ethnography SB RAS
27 shared publications - Ekaterina N. Bocharova
Institute of Archaeology and Ethnography SB RAS
20 shared publications - Kseniya Anatolievna Kolobova
Institute of Archaeology and Ethnography SB RAS
19 shared publications Institute of Archaeology and Ethnography SB RAS
16 shared publications- Anton A. Anoikin
Institute of Archaeology and Ethnography of the Siberian Branch of the Russian Academy of Sciences
15 shared publications - Pavel Chistyakov
Institute of Archaeology and Ethnography of the Siberian Branch of the Russian Academy of Sciences, Russian Federation, Novosibirsk
14 shared publications
Latest Publications
- Open Access
- 15 March 2026
- Published by Tyumen Scientific Center of the SB RAS in Vestnik Arheologii, Antropologii i Etnografii
- No. 1(72),p. 5
The typological aspect of the study of bifacial tools within the Sibiryachikha variant of the Altai Middle Paleolithic
Late European Neanderthals, who migrated from the territories of Eastern and Central Europe to the Altai region between 70,000 and 60,000 years BP, introduced a material culture that underwent minimal transformation in their new habitat. The Micoquian technocomplex, documented in the Altai, exhibits characteristics consistent with European industries, most notably the production of plano-convex asymmetrical bifacial tools. This article pre-sents a pioneering assemblage of bifacial tools recovered from Chagyrskaya Cave — a key archaeological site as-sociated with the Sibiryachikha variant of the Altai Middle Paleolithic, featuring notable Micoquian assemblages. A typological approach has been developed for a corpus of 144 bifacial tools, incorporating methodological advances proposed by European researchers. The approach prioritises edge length as a primary criterion, enabling inferences about the degree of reduction, the availability or potential scarcity of high-quality raw materials, and the specific tech-niques employed in tool retouch. Several types of asymmetrical plano-convex Keilmesser knives have been identi-fied within the analysed complex, including Bocksteinmesser and Klausennischemesser. The analysis of edge an-gles reveals that bifaces of varying shapes can be classified into distinct functional groups.
- 15 March 2026
- Published by Tyumen Scientific Center of the SB RAS in Vestnik Arheologii, Antropologii i Etnografii
- No. 1(72),p. 5
Open AccessThe typological aspect of the study of bifacial tools within the Sibiryachikha variant of the Altai Middle Paleolithic
Late European Neanderthals, who migrated from the territories of Eastern and Central Europe to the Altai region between 70,000 and 60,000 years BP, introduced a material culture that underwent minimal transformation in their new habitat. The Micoquian technocomplex, documented in the Altai, exhibits characteristics consistent with European industries, most notably the production of plano-convex asymmetrical bifacial tools. This article pre-sents a pioneering assemblage of bifacial tools recovered from Chagyrskaya Cave — a key archaeological site as-sociated with the Sibiryachikha variant of the Altai Middle Paleolithic, featuring notable Micoquian assemblages. A typological approach has been developed for a corpus of 144 bifacial tools, incorporating methodological advances proposed by European researchers. The approach prioritises edge length as a primary criterion, enabling inferences about the degree of reduction, the availability or potential scarcity of high-quality raw materials, and the specific tech-niques employed in tool retouch. Several types of asymmetrical plano-convex Keilmesser knives have been identi-fied within the analysed complex, including Bocksteinmesser and Klausennischemesser. The analysis of edge an-gles reveals that bifaces of varying shapes can be classified into distinct functional groups.
- Open Access
- 13 January 2026
- Published by Institute of Archaeology and Ethnography SB RAS in Archaeology, Ethnology and Anthropology of Eurasia
- Vol. 53 (4) , 41-51
Biface Trimming Elements as Indicators of Tool Rejuvenation Intensity: The Case of Sibiryachikha, Altai
Biface trimming elements represent an important diagnostic source of information for studying various stages of bifacial tool production. In Middle Paleolithic assemblages, they often constitute a significant portion of the sample, making them particularly useful for identifying specific technological operations such as primary reduction and shaping of bifacial preforms, edge formation and retouching, working edge rejuvenation, and modification of bifacial tools. Here, we present the findings of a systematic typological analysis of biface trimming elements. Through a comprehensive metric and morphological analysis of experimental collections and Middle Paleolithic assemblages representing the Sibiryachikha industries of the Altai, we have developed a refined typology of technical spalls with regard to local archaeological specificity. Our analysis revealed no statistically significant differences either between parameters of type 0 and type 1 spalls or between those of type 2 and type 3, suggesting that these groups correspond to specific technological operations. In contrast, type 4 and type 5 technical spalls, which indicate onsite tool modification, show significant metric differences. The results demonstrate functional and technological distinctions between the assemblages. Materials from Chagyrskaya Cave are especially indicative of primary edge retouching and tool shaping, while the Okladnikov Cave industry mostly evidences maintenance and modification of bifacial tools.
- 13 January 2026
- Published by Institute of Archaeology and Ethnography SB RAS in Archaeology, Ethnology and Anthropology of Eurasia
- Vol. 53 (4) , 41-51
Open AccessBiface Trimming Elements as Indicators of Tool Rejuvenation Intensity: The Case of Sibiryachikha, Altai
Biface trimming elements represent an important diagnostic source of information for studying various stages of bifacial tool production. In Middle Paleolithic assemblages, they often constitute a significant portion of the sample, making them particularly useful for identifying specific technological operations such as primary reduction and shaping of bifacial preforms, edge formation and retouching, working edge rejuvenation, and modification of bifacial tools. Here, we present the findings of a systematic typological analysis of biface trimming elements. Through a comprehensive metric and morphological analysis of experimental collections and Middle Paleolithic assemblages representing the Sibiryachikha industries of the Altai, we have developed a refined typology of technical spalls with regard to local archaeological specificity. Our analysis revealed no statistically significant differences either between parameters of type 0 and type 1 spalls or between those of type 2 and type 3, suggesting that these groups correspond to specific technological operations. In contrast, type 4 and type 5 technical spalls, which indicate onsite tool modification, show significant metric differences. The results demonstrate functional and technological distinctions between the assemblages. Materials from Chagyrskaya Cave are especially indicative of primary edge retouching and tool shaping, while the Okladnikov Cave industry mostly evidences maintenance and modification of bifacial tools.
- 1 January 2026
- Published by Institute of Archaeology and Ethnography SB RAS in Problems of Archaeology, Ethnography, Anthropology of Siberia and Neighboring Territories
- Vol. 32 (1)
Lithic Assemblages of the Yenisei River Basin at the Pleistocene–Holocene Transition: A Statistical Analysis
This study presents a statistical analysis of lithic assemblages from recently discovered Middle Yenisei sites dating to the Pleistocene–Holocene transition, examined in the context of the Kokorevo and Afontovo Paleolithic traditions. Assemblages from this period have long remained on the periphery of scholarly research due to the paucity of available source materials. The recent introduction of new materials into scientific circulation has made it possible, for the first time, to apply statistical methods for their cultural attribution. These methods include Correspondence Analysis (CA), ANOSIM (Analysis of Similarities), and SIMPER (Similarity Percentage analysis). A system of diagnostic attributes was used to compare the Pleistocene–Holocene boundary assemblages with the complexes of the Kokorevo and Afontovo archaeological cultures. This system takes into account the organization of primary reduction and the typology of the toolkit. The analysis revealed that the materials from the boundary sites share the greatest similarity with the Kokorevo culture. At the same time, they also possess specific features that bring them closer to the stone industries of the Afontovo culture. These features include an increased proportion of flake knapping and the use of flakes as blanks. Notably, the assemblages from the Pleistocene–Holocene boundary demonstrate high variability. This indicates their heterogeneity. It also suggests a complex and multi-vector nature of cultural processes during this period.
- 1 January 2026
- Published by Institute of Archaeology and Ethnography SB RAS in Problems of Archaeology, Ethnography, Anthropology of Siberia and Neighboring Territories
- Vol. 32 (1)
Lithic Assemblages of the Yenisei River Basin at the Pleistocene–Holocene Transition: A Statistical Analysis
This study presents a statistical analysis of lithic assemblages from recently discovered Middle Yenisei sites dating to the Pleistocene–Holocene transition, examined in the context of the Kokorevo and Afontovo Paleolithic traditions. Assemblages from this period have long remained on the periphery of scholarly research due to the paucity of available source materials. The recent introduction of new materials into scientific circulation has made it possible, for the first time, to apply statistical methods for their cultural attribution. These methods include Correspondence Analysis (CA), ANOSIM (Analysis of Similarities), and SIMPER (Similarity Percentage analysis). A system of diagnostic attributes was used to compare the Pleistocene–Holocene boundary assemblages with the complexes of the Kokorevo and Afontovo archaeological cultures. This system takes into account the organization of primary reduction and the typology of the toolkit. The analysis revealed that the materials from the boundary sites share the greatest similarity with the Kokorevo culture. At the same time, they also possess specific features that bring them closer to the stone industries of the Afontovo culture. These features include an increased proportion of flake knapping and the use of flakes as blanks. Notably, the assemblages from the Pleistocene–Holocene boundary demonstrate high variability. This indicates their heterogeneity. It also suggests a complex and multi-vector nature of cultural processes during this period.
- 1 January 2026
- Published by Institute of Archaeology and Ethnography SB RAS in Problems of Archaeology, Ethnography, Anthropology of Siberia and Neighboring Territories
- Vol. 32 (1)
Manual and Digital Measurements of Stone Artifacts: Discrepancies, Patterns, and Verification of Nominal Attributes
This article compares manual and digital methods for measuring blades and microblades, and evaluates the capacity of quantitative profile curvature analysis for distinguishing between percussion and pressure reduction techniques. The study involved 114 intact blades and microblades produced experimentally through opposed platform reduction of narrow-faced cores using pressure flaking technique and direct percussion with a soft antler hammer. Manual measurements were done with a digital caliper, while digital measurements were based on 3D models generated using a Solutionix D700 scanner and processed in Geomagic software. Statistical analyses (Wilcoxon and Mann-Whitney tests) revealed significant differences between manual and digital measurements of length, width, and thickness, although most discrepancies were less than 1 mm, which is acceptable for processing large archaeological assemblages. Subjective categorical assessments of lateral profile shape (straight, twisted, or curved) were found to correspond closely with quantitative curvature data obtained from 3D models. Quantitative curvature analysis makes it possible to distinguish reduction strategies only among the specimens with straight profile. Statistically significant differences between the flakes produced by percussion or pressure in this group remained evident even when the analysis was restricted to blades. The diagnostic value of the method was limited for twisted and curved varieties, and for microblades. Despite high time costs of 3D modeling, its application improves reproducibility, precision, and objectivity of morphometric data.
- 1 January 2026
- Published by Institute of Archaeology and Ethnography SB RAS in Problems of Archaeology, Ethnography, Anthropology of Siberia and Neighboring Territories
- Vol. 32 (1)
Manual and Digital Measurements of Stone Artifacts: Discrepancies, Patterns, and Verification of Nominal Attributes
This article compares manual and digital methods for measuring blades and microblades, and evaluates the capacity of quantitative profile curvature analysis for distinguishing between percussion and pressure reduction techniques. The study involved 114 intact blades and microblades produced experimentally through opposed platform reduction of narrow-faced cores using pressure flaking technique and direct percussion with a soft antler hammer. Manual measurements were done with a digital caliper, while digital measurements were based on 3D models generated using a Solutionix D700 scanner and processed in Geomagic software. Statistical analyses (Wilcoxon and Mann-Whitney tests) revealed significant differences between manual and digital measurements of length, width, and thickness, although most discrepancies were less than 1 mm, which is acceptable for processing large archaeological assemblages. Subjective categorical assessments of lateral profile shape (straight, twisted, or curved) were found to correspond closely with quantitative curvature data obtained from 3D models. Quantitative curvature analysis makes it possible to distinguish reduction strategies only among the specimens with straight profile. Statistically significant differences between the flakes produced by percussion or pressure in this group remained evident even when the analysis was restricted to blades. The diagnostic value of the method was limited for twisted and curved varieties, and for microblades. Despite high time costs of 3D modeling, its application improves reproducibility, precision, and objectivity of morphometric data.
- 27 February 2025
- Published by Stratum plus I.P., High Anthropological School University in Stratum plus. Archaeology and Cultural Anthropology
- No. 1,p. 301-314
Practical Application of Seriation for the Analysis of Archaeological Data
The article describes the basic algorithms for the practical application of various seriation methods for the classification, correlation and systematisation of archaeological data. Designed for the relative dating of archaeological complexes, seriation has not lost its scientific relevance and is used in all areas of archaeology, even today, when absolute dating methods are available to researchers. The analysis of multilayered Paleolithic complexes in Siberia demonstrates the potential for seriation to determine evolutionary development or cultural change at a single site. The advantages of this method over the calculation of percentages include the possibility of its use by researchers without experience in mathematical statistics; the possibility of visualising the results; and the possibility of operating with large sets of complexes and attributes. The objective of the proposed article is to familiarise a wide range of Russian-speaking researchers with the seriation.
- 27 February 2025
- Published by Stratum plus I.P., High Anthropological School University in Stratum plus. Archaeology and Cultural Anthropology
- No. 1,p. 301-314
Practical Application of Seriation for the Analysis of Archaeological Data
The article describes the basic algorithms for the practical application of various seriation methods for the classification, correlation and systematisation of archaeological data. Designed for the relative dating of archaeological complexes, seriation has not lost its scientific relevance and is used in all areas of archaeology, even today, when absolute dating methods are available to researchers. The analysis of multilayered Paleolithic complexes in Siberia demonstrates the potential for seriation to determine evolutionary development or cultural change at a single site. The advantages of this method over the calculation of percentages include the possibility of its use by researchers without experience in mathematical statistics; the possibility of visualising the results; and the possibility of operating with large sets of complexes and attributes. The objective of the proposed article is to familiarise a wide range of Russian-speaking researchers with the seriation.
- Open Access
Arrow heads at Obi-Rakhmat (Uzbekistan) 80 ka ago
When they are occasionally found in Middle Palaeolithic Neanderthal settlements, lithic weapons heads are large and do not differ in size, shaping or type from those used for activities other than hunting, such as plant gathering or butchery. The presence in a same assemblage of various types of armatures, some of which are microlithic and designed for this purpose, has only been documented in Modern Humans sites. Recent studies show that light projectile points, which were to become the structuring element of Upper Palaeolithic lithic industries, were already present in its formative stages. However, they remain marginal in debates regarding the Middle to Upper Paleolithic transition. We present here the first results of a search for weapon heads in the oldest layers of the Obi-Rakhmat rock shelter, at around 80 ka. This site, located in the western foothills of the Tian Shan Mountains, northeastern Uzbekistan, has yielded a blade-based lithic industry which is forming part of the continuity of the Levantine Early Middle Paleolithic but with several innovative traits. The assemblage is based on a systematic blade production (regular thick narrow blades from unipolar and bipolar sub-prismatic and narrow-faced cores, thin and wide blades from flat-faced Levallois-like cores) along with shorter pieces from convergent or centripetal Levallois cores, and bladelets from burin-cores and other small cores. Three types of projectile armature are identified from their impact marks: retouched points, bladelets and raw micropoints which were so far unseen due to their fragmentary state. The micropoints are too narrow for having been fitted to anything other than arrow shafts. They are similar to the armatures described in a pioneer settlement by Sapiens in the Rhône Valley, France, 25,000 years later.
Open AccessArrow heads at Obi-Rakhmat (Uzbekistan) 80 ka ago
When they are occasionally found in Middle Palaeolithic Neanderthal settlements, lithic weapons heads are large and do not differ in size, shaping or type from those used for activities other than hunting, such as plant gathering or butchery. The presence in a same assemblage of various types of armatures, some of which are microlithic and designed for this purpose, has only been documented in Modern Humans sites. Recent studies show that light projectile points, which were to become the structuring element of Upper Palaeolithic lithic industries, were already present in its formative stages. However, they remain marginal in debates regarding the Middle to Upper Paleolithic transition. We present here the first results of a search for weapon heads in the oldest layers of the Obi-Rakhmat rock shelter, at around 80 ka. This site, located in the western foothills of the Tian Shan Mountains, northeastern Uzbekistan, has yielded a blade-based lithic industry which is forming part of the continuity of the Levantine Early Middle Paleolithic but with several innovative traits. The assemblage is based on a systematic blade production (regular thick narrow blades from unipolar and bipolar sub-prismatic and narrow-faced cores, thin and wide blades from flat-faced Levallois-like cores) along with shorter pieces from convergent or centripetal Levallois cores, and bladelets from burin-cores and other small cores. Three types of projectile armature are identified from their impact marks: retouched points, bladelets and raw micropoints which were so far unseen due to their fragmentary state. The micropoints are too narrow for having been fitted to anything other than arrow shafts. They are similar to the armatures described in a pioneer settlement by Sapiens in the Rhône Valley, France, 25,000 years later.
- Open Access
- 12 January 2025
- Published by Institute of Archaeology and Ethnography SB RAS in Archaeology, Ethnology and Anthropology of Eurasia
- Vol. 52 (4) , 50-58
Industry of Okladnikov Cave Layer 3 in the Context of the Sibiryachikha Complexes of the Altai Mountains
This paper presents the results of a comprehensive analysis of lithics from layer 3 of Okladnikov Cave and their relevance to the Sibiryachikha industries of the Altai Mountains. Attribute analysis has shown that the industry of layer 3 demonstrates technological and typological similarities with the Sibiryachikha industries. These include radial flaking with an offset technological axis, a predominance of convergent side-scrapers, and a series of planoconvex bifacial tools. Functionally, the site was a camp where horse and rhinoceros carcasses were butchered and consumed. The analysis of flaking sequence integrity revealed similarity between Okladnikov layer 3 and Chagyrskaya industries in terms of primary and bifacial reduction. The initial stages of core decortication were carried out outside the cave, at the rock outcrops. Subsequent stages of core utilization and all stages of bifacial flaking were carried out in situ. The main difference between Okladnikov layer 3 and Chagyrskaya layer 6c/2 industries concerns only the stage of manufacturing and modifying stone tools. At Okladnikov Cave, these processes were much more intense than at Chagyrskaya, which may indicate transportation of numerous tools and blanks made of high-quality raw material from more distant sources.
- 12 January 2025
- Published by Institute of Archaeology and Ethnography SB RAS in Archaeology, Ethnology and Anthropology of Eurasia
- Vol. 52 (4) , 50-58
Open AccessIndustry of Okladnikov Cave Layer 3 in the Context of the Sibiryachikha Complexes of the Altai Mountains
This paper presents the results of a comprehensive analysis of lithics from layer 3 of Okladnikov Cave and their relevance to the Sibiryachikha industries of the Altai Mountains. Attribute analysis has shown that the industry of layer 3 demonstrates technological and typological similarities with the Sibiryachikha industries. These include radial flaking with an offset technological axis, a predominance of convergent side-scrapers, and a series of planoconvex bifacial tools. Functionally, the site was a camp where horse and rhinoceros carcasses were butchered and consumed. The analysis of flaking sequence integrity revealed similarity between Okladnikov layer 3 and Chagyrskaya industries in terms of primary and bifacial reduction. The initial stages of core decortication were carried out outside the cave, at the rock outcrops. Subsequent stages of core utilization and all stages of bifacial flaking were carried out in situ. The main difference between Okladnikov layer 3 and Chagyrskaya layer 6c/2 industries concerns only the stage of manufacturing and modifying stone tools. At Okladnikov Cave, these processes were much more intense than at Chagyrskaya, which may indicate transportation of numerous tools and blanks made of high-quality raw material from more distant sources.
- Open Access
- 12 January 2025
- Published by Institute of Archaeology and Ethnography SB RAS in Archaeology, Ethnology and Anthropology of Eurasia
- Vol. 52 (4) , 39-49
A New Approach to the Study of Flaking Sequence Integrity Based on the Chagyrskaya Cave Assemblage, Northwestern Altai
This paper presents a new approach to assessing the integrity of flaking sequences at Paleolithic sites. It combines experimental modeling with subsequent attribute analysis of the archaeological collection. The method is based on changes in the proportion of various technical spalls at different stages of core and bifacial reduction, as well as changes in the sizes of cortical flakes. This methodology was applied to reconstruct the strategy of the use of lithic raw material by late Neanderthals of the Altai, on the basis of the Chagyrskaya Cave assemblage. The study has shown that the most common method, using the proportion of cortical spalls, is not universal, and has limitations due to the structure of lithic industry and the specificity of raw material. When pebbles and boulders of various sizes are used, as in the assemblage from layer 6c/2 of Chagyrskaya Cave, a high proportion of cortical spalls can result from the production of bifacial tools at the site. The study demonstrates that the first stage in core reduction occurred outside the cave. The high proportion of cortical spalls in the assemblage is due to the fact that bifaces were manufactured in situ, whereas tools on cortical flakes and cortical tool blanks had been transported to the site. The study reveals a connection of various technical spalls with stages in core and biface flaking sequences, and their number is evaluated in the cases of complete versus reduced flaking cycles.
- 12 January 2025
- Published by Institute of Archaeology and Ethnography SB RAS in Archaeology, Ethnology and Anthropology of Eurasia
- Vol. 52 (4) , 39-49
Open AccessA New Approach to the Study of Flaking Sequence Integrity Based on the Chagyrskaya Cave Assemblage, Northwestern Altai
This paper presents a new approach to assessing the integrity of flaking sequences at Paleolithic sites. It combines experimental modeling with subsequent attribute analysis of the archaeological collection. The method is based on changes in the proportion of various technical spalls at different stages of core and bifacial reduction, as well as changes in the sizes of cortical flakes. This methodology was applied to reconstruct the strategy of the use of lithic raw material by late Neanderthals of the Altai, on the basis of the Chagyrskaya Cave assemblage. The study has shown that the most common method, using the proportion of cortical spalls, is not universal, and has limitations due to the structure of lithic industry and the specificity of raw material. When pebbles and boulders of various sizes are used, as in the assemblage from layer 6c/2 of Chagyrskaya Cave, a high proportion of cortical spalls can result from the production of bifacial tools at the site. The study demonstrates that the first stage in core reduction occurred outside the cave. The high proportion of cortical spalls in the assemblage is due to the fact that bifaces were manufactured in situ, whereas tools on cortical flakes and cortical tool blanks had been transported to the site. The study reveals a connection of various technical spalls with stages in core and biface flaking sequences, and their number is evaluated in the cases of complete versus reduced flaking cycles.
- 1 January 2025
- Published by Institute of Archaeology and Ethnography SB RAS in Problems of Archaeology, Ethnography, Anthropology of Siberia and Neighboring Territories
- Vol. 31, 59-66
Sidorikha Site on the Middle Yenisei: 2025 Field Season Results
This paper presents the results of field and analytical studies at the Sidorikha site. This site is a single-layered terminal Upper Paleolithic site located on the right bank of the Sidorikha River, on the shore of the Krasnoyarsk Reservoir. Previous research showed that the cultural layer was accumulated during a short-term occupation episode by a small group around 14.6–14.2 ka cal BP. The limited excavation area and low artifact density did not provide the ground for the site type identification — whether the site was visited once or several visits during a short time. To clarify these issues, excavations were continued in 2025. The 2025 field season yielded a collection of 1,686 lithic artifacts and 152 animal bone fragments. Of the total of 29 stone tools, such types as scrapers, microscrapers, a combination tool (scraper + end-scraper), chisel-like tools, a perforator, a knife, and a microburin were identified. Signs of tool refitting and reshapening indicate a secondary usage. Three needle fragments were found among the bone artifacts. An artifact made of a bird tubular bone that could serve as a needle case was identified. Spatial analysis showed that the hearth was likely the center of domestic activity. To the east, a compact concentration of flakes and chips was found and interpreted as a knapping area. This spatial pattern reflects localized organization of activities within a short-term camp. The assemblage is preliminarily attributed to the Afontovo cultural tradition. Artifacts of surface occurrence collected in previous years showed features related to the Kokorevo cultural tradition. This combination suggests a complex pattern of human occupation of this region during the terminal Pleistocene.
- 1 January 2025
- Published by Institute of Archaeology and Ethnography SB RAS in Problems of Archaeology, Ethnography, Anthropology of Siberia and Neighboring Territories
- Vol. 31, 59-66
Sidorikha Site on the Middle Yenisei: 2025 Field Season Results
This paper presents the results of field and analytical studies at the Sidorikha site. This site is a single-layered terminal Upper Paleolithic site located on the right bank of the Sidorikha River, on the shore of the Krasnoyarsk Reservoir. Previous research showed that the cultural layer was accumulated during a short-term occupation episode by a small group around 14.6–14.2 ka cal BP. The limited excavation area and low artifact density did not provide the ground for the site type identification — whether the site was visited once or several visits during a short time. To clarify these issues, excavations were continued in 2025. The 2025 field season yielded a collection of 1,686 lithic artifacts and 152 animal bone fragments. Of the total of 29 stone tools, such types as scrapers, microscrapers, a combination tool (scraper + end-scraper), chisel-like tools, a perforator, a knife, and a microburin were identified. Signs of tool refitting and reshapening indicate a secondary usage. Three needle fragments were found among the bone artifacts. An artifact made of a bird tubular bone that could serve as a needle case was identified. Spatial analysis showed that the hearth was likely the center of domestic activity. To the east, a compact concentration of flakes and chips was found and interpreted as a knapping area. This spatial pattern reflects localized organization of activities within a short-term camp. The assemblage is preliminarily attributed to the Afontovo cultural tradition. Artifacts of surface occurrence collected in previous years showed features related to the Kokorevo cultural tradition. This combination suggests a complex pattern of human occupation of this region during the terminal Pleistocene.
- 1 January 2025
- Published by Institute of Archaeology and Ethnography SB RAS in Problems of Archaeology, Ethnography, Anthropology of Siberia and Neighboring Territories
- Vol. 31, 361-366
Stone Pendants from the Early Upper Paleolithic Site of Sabanikha-3 (Materials from 2022–2025 Field Seasons)
This article provides an analysis of stone pendants from the Early Upper Paleolithic site Sabanikha-3 in Middle Yenisei. The site is particularly significant as its cultural layer is in situ, remaining intact and undisturbed—a rare occurrence for EUP in this region. Excavations in 2022–2025 yielded a collection including four items: three pendants and a disk fragment. Pendant No. 1 is a complete, sub-cylindrical piece with a defined “head” and a biconically drilled suspension hole. Pendant No. 2 made of agalmatolite was fractured and evidences an unsuccessful attempt at repair and repurposing. Pendant No. 3 is an unfinished item broken while drilling. The fourth item is a polished disk fragment with both reworking traces and use-wear. The identified manufacturing techniques include biconical drilling and rare combination of drilling and an incised groove for suspension (on Pendant No. 1). Close parallels for these personal ornamentations are found at the nearby Malaya Syya site. While the production of personal ornamentations was widespread across Southern Siberia and Central Asia during the Initial and Early Upper Paleolithic, these items were typically made from organic materials (teeth, bone, or ivory). In contrast, the use of various kinds of stone for ornamentations is a distinctive characteristic of the Early Upper Paleolithic industries in the Yenisei basin. Studying such artefacts ensures an important contribution to understanding of symbolic activities, social interactions, and cultural ties of the ancient Siberian population.
- 1 January 2025
- Published by Institute of Archaeology and Ethnography SB RAS in Problems of Archaeology, Ethnography, Anthropology of Siberia and Neighboring Territories
- Vol. 31, 361-366
Stone Pendants from the Early Upper Paleolithic Site of Sabanikha-3 (Materials from 2022–2025 Field Seasons)
This article provides an analysis of stone pendants from the Early Upper Paleolithic site Sabanikha-3 in Middle Yenisei. The site is particularly significant as its cultural layer is in situ, remaining intact and undisturbed—a rare occurrence for EUP in this region. Excavations in 2022–2025 yielded a collection including four items: three pendants and a disk fragment. Pendant No. 1 is a complete, sub-cylindrical piece with a defined “head” and a biconically drilled suspension hole. Pendant No. 2 made of agalmatolite was fractured and evidences an unsuccessful attempt at repair and repurposing. Pendant No. 3 is an unfinished item broken while drilling. The fourth item is a polished disk fragment with both reworking traces and use-wear. The identified manufacturing techniques include biconical drilling and rare combination of drilling and an incised groove for suspension (on Pendant No. 1). Close parallels for these personal ornamentations are found at the nearby Malaya Syya site. While the production of personal ornamentations was widespread across Southern Siberia and Central Asia during the Initial and Early Upper Paleolithic, these items were typically made from organic materials (teeth, bone, or ivory). In contrast, the use of various kinds of stone for ornamentations is a distinctive characteristic of the Early Upper Paleolithic industries in the Yenisei basin. Studying such artefacts ensures an important contribution to understanding of symbolic activities, social interactions, and cultural ties of the ancient Siberian population.