Michael T. Hendry
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Michael T. Hendry has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Kathleen E. Baker
School of Engineering Safety and Risk Management, University of Alberta, Edmonton, Canada
3 shared publications - Lianne Lefsrud
University of Alberta
3 shared publications - Renato Macciotta
Department of Civil and Environmental Engineering, University of Alberta, Edmonton, AB T6G 2R3, Canada
3 shared publications - Alireza Roghani
Automotive and Surface Transportation, National Research Council of Canada, 2320 Lester Rd, Gloucester, ON K1T 3T3, Canada
1 shared publication D. A. Hughes
School of Civil Engineering, Queen's University Belfast, Northern Ireland
1 shared publication- Feng Yu
College of Mechanical and Automotive Engineering, Ningbo University of Technology, Ningbo, China
1 shared publication
Latest Publications
- 15 September 2020
- Published by Springer Nature in Safety in Extreme Environments
- Vol. 2 (3) , 259
Correction to: Risk communication in Athabasca oil sands tailings operations
- 15 September 2020
- Published by Springer Nature in Safety in Extreme Environments
- Vol. 2 (3) , 259
Correction to: Risk communication in Athabasca oil sands tailings operations
- 17 May 2020
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 98 (11) , 2330-2341
Combining safety approaches to bring hazards into focus: An oil sands tailings case study
At least 50 hazardous occurrences associated with tailings facilities occurred in the Canadian mining industry between 2000‐2014. Further investigation revealed a dearth of information on worker safety around tailings storage and transport facilities. Workers at oil sands tailings operations are exposed to hazardous scenarios, including loss of containment and line of fire. These are the similar scenarios that manifest in traditional process industries, with the notable differences between traditional process industries and tailings operations being the frequency of incidents, pressures, volumes, and temperatures. The presence of hazardous scenarios and lack of incident reviews illustrate the need for increased attention to be paid to worker safety at oil sand tailings operations as well as enhancements to current hazard identification tools. Process safety management tools such as bow tie diagrams can be applied to tailings operations to visually identify unwanted events (process and occupational health and safety related), potential threats, consequences, and controls used to prevent incidents from occurring. They also serve as a tool for continuous improvement and show any over‐reliance on one type of control, such as administrative controls or personal protective equipment. This research combines safety approaches using the bow tie analysis of seven hazardous operational activities in the oil sands tailings operations as a case study. The impact of behavioural safety on the controls is also analyzed. This research facilitated the sharing of tailings safety best practices among oil sands operators and regional contractors.
- 17 May 2020
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 98 (11) , 2330-2341
Combining safety approaches to bring hazards into focus: An oil sands tailings case study
At least 50 hazardous occurrences associated with tailings facilities occurred in the Canadian mining industry between 2000‐2014. Further investigation revealed a dearth of information on worker safety around tailings storage and transport facilities. Workers at oil sands tailings operations are exposed to hazardous scenarios, including loss of containment and line of fire. These are the similar scenarios that manifest in traditional process industries, with the notable differences between traditional process industries and tailings operations being the frequency of incidents, pressures, volumes, and temperatures. The presence of hazardous scenarios and lack of incident reviews illustrate the need for increased attention to be paid to worker safety at oil sand tailings operations as well as enhancements to current hazard identification tools. Process safety management tools such as bow tie diagrams can be applied to tailings operations to visually identify unwanted events (process and occupational health and safety related), potential threats, consequences, and controls used to prevent incidents from occurring. They also serve as a tool for continuous improvement and show any over‐reliance on one type of control, such as administrative controls or personal protective equipment. This research combines safety approaches using the bow tie analysis of seven hazardous operational activities in the oil sands tailings operations as a case study. The impact of behavioural safety on the controls is also analyzed. This research facilitated the sharing of tailings safety best practices among oil sands operators and regional contractors.
- 14 December 2019
- Published by Springer Nature in Safety in Extreme Environments
- Vol. 2 (2) , 127-139
Risk communication in Athabasca oil sands tailings operations
- 14 December 2019
- Published by Springer Nature in Safety in Extreme Environments
- Vol. 2 (2) , 127-139
Risk communication in Athabasca oil sands tailings operations
- 1 December 2016
- Published by American Society of Civil Engineers (ASCE) in Journal of Transportation Engineering
- Vol. 142 (12)
Continuous Vertical Track Deflection Measurements to Map Subgrade Condition along a Railway Line: Methodology and Case Studies
This paper presents the methodology developed for the use of continuous vertical track deflection measurements from a moving loaded rail car to map the subgrade condition along a railway line. This analysis of deflection data was developed following the collection of more than 12,000 km of measurements. It was evident from the collected data that unprocessed deflection measurements are heavily effected by the track surface condition such as joints and geometry irregularities so as to obscure the deflections because of poor subgrade support. A filtering method was employed to minimize the influence of the surface condition which occur at short wavelengths and show the variations in track deflections because of changes in subgrade conditions which occur at longer wavelengths. The resulting processed data are compared with the geology over two study railway subdivisions to demonstrate that the processed vertical track deflection measurements are representative of the subgrade conditions. The filterin...
- 1 December 2016
- Published by American Society of Civil Engineers (ASCE) in Journal of Transportation Engineering
- Vol. 142 (12)
Continuous Vertical Track Deflection Measurements to Map Subgrade Condition along a Railway Line: Methodology and Case Studies
This paper presents the methodology developed for the use of continuous vertical track deflection measurements from a moving loaded rail car to map the subgrade condition along a railway line. This analysis of deflection data was developed following the collection of more than 12,000 km of measurements. It was evident from the collected data that unprocessed deflection measurements are heavily effected by the track surface condition such as joints and geometry irregularities so as to obscure the deflections because of poor subgrade support. A filtering method was employed to minimize the influence of the surface condition which occur at short wavelengths and show the variations in track deflections because of changes in subgrade conditions which occur at longer wavelengths. The resulting processed data are compared with the geology over two study railway subdivisions to demonstrate that the processed vertical track deflection measurements are representative of the subgrade conditions. The filterin...
- 1 February 2010
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Geotechnical Engineering
- Vol. 163 (1) , 3-12
Track displacement and energy loss in a railway embankment
The mainline railway track between Dublin and Belfast was constructed during the 1850s, with substantial lengths of railway embankment constructed over soft, peaty soils. In recent years Northern Ireland Railways (NIR) has noticed that the sections of the railway track constructed on these peaty soils have been deteriorating at an increasing rate. Train speeds have been reduced in response to concerns that cyclic track displacements appear to be increasing over time in response to train loading. Track maintenance has also increased significantly. The research described in this paper was undertaken to quantify the response to cyclic train loading of two portions of this track founded on peaty soils. Track displacements were recorded using a sensor system specifically created for this project. The sensor consisted of a photosensitive array, mounted on the sleepers, and a laser, which was targeted onto the photosensitive array from a location outside the area of influence of train loading. Track deflections from 5 to 20 mm were measured under train speeds from near zero to over 120 km/h. The temporal variation in track displacement was used to calibrate an analytical (Winkler) model. This analysis suggests that the deformation of the embankment under train loading was not due to dynamic excitation but rather to static deformation of the poor-quality fill and soft foundation materials. As a consequence, the analytical model highlighted that train speed has limited effect on the magnitude of the deflection of the embankment within NIR operating speeds, but has the potential to significantly reduce the power lost to the damping within the embankment and subgrade.
- 1 February 2010
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Geotechnical Engineering
- Vol. 163 (1) , 3-12
Track displacement and energy loss in a railway embankment
The mainline railway track between Dublin and Belfast was constructed during the 1850s, with substantial lengths of railway embankment constructed over soft, peaty soils. In recent years Northern Ireland Railways (NIR) has noticed that the sections of the railway track constructed on these peaty soils have been deteriorating at an increasing rate. Train speeds have been reduced in response to concerns that cyclic track displacements appear to be increasing over time in response to train loading. Track maintenance has also increased significantly. The research described in this paper was undertaken to quantify the response to cyclic train loading of two portions of this track founded on peaty soils. Track displacements were recorded using a sensor system specifically created for this project. The sensor consisted of a photosensitive array, mounted on the sleepers, and a laser, which was targeted onto the photosensitive array from a location outside the area of influence of train loading. Track deflections from 5 to 20 mm were measured under train speeds from near zero to over 120 km/h. The temporal variation in track displacement was used to calibrate an analytical (Winkler) model. This analysis suggests that the deformation of the embankment under train loading was not due to dynamic excitation but rather to static deformation of the poor-quality fill and soft foundation materials. As a consequence, the analytical model highlighted that train speed has limited effect on the magnitude of the deflection of the embankment within NIR operating speeds, but has the potential to significantly reduce the power lost to the damping within the embankment and subgrade.