Chirag Madhusudan Khalde
Chirag Madhusudan Khalde has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Vivek Vinayak Ranade
Multiphase Reactors and Intensification Group, Bernal Institute, University of Limerick, Limerick V94T9PX, Ireland
3 shared publications - Ajinkya Pandit
Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, USA
2 shared publications Jitendra S. Sangwai
Indian Institute of Technology Madras
2 shared publicationsAbdus Samad
Indian Institute of Technology Madras
1 shared publication- Jitendra Shital Sangwai
Indian Institute of Technology Madras
1 shared publication - Ketan Madane
Department of Chemical Sciences, Bernal Institute, University of Limerick, Limerick V94 T9PX, Ireland
1 shared publication
Latest Publications
- Open Access
- 25 January 2022
- Published by Wiley in AIChE Journal
- Vol. 69 (1) , e17621
Flow physics of planar bistable fluidic oscillator with backflow limbs
Fluidic oscillators (FOs) are used in a variety of applications, including process control and process intensification. Despite the simple design and operation of FOs, the fluid dynamics of FOs exhibit rich complexities. The inherently unstable flow, jet oscillations, and resulting vortices influence mixing and other transport processes. In this work, we computationally investigated the fluid dynamics of a new design of a planar FO with backflow limbs. The design comprised of two symmetric backflow limbs leading to bistable flow. The unsteady flow dynamics, internal recirculation, jet oscillations, secondary flow vortices were computationally studied over a range of inlet Reynolds numbers (2400–12,000). The nature and frequency of the jet oscillations were quantified. The computed jet oscillation frequency was compared with the experimentally measured (using imaging techniques) jet oscillation frequency. The flow model was then used to quantitatively understand mixing, heat transfer, and residence time distribution. The approach and the results presented in this work will provide a basis for designing FO's with desired flow and transport characteristics for various engineering applications.
- 25 January 2022
- Published by Wiley in AIChE Journal
- Vol. 69 (1) , e17621
Open AccessFlow physics of planar bistable fluidic oscillator with backflow limbs
Fluidic oscillators (FOs) are used in a variety of applications, including process control and process intensification. Despite the simple design and operation of FOs, the fluid dynamics of FOs exhibit rich complexities. The inherently unstable flow, jet oscillations, and resulting vortices influence mixing and other transport processes. In this work, we computationally investigated the fluid dynamics of a new design of a planar FO with backflow limbs. The design comprised of two symmetric backflow limbs leading to bistable flow. The unsteady flow dynamics, internal recirculation, jet oscillations, secondary flow vortices were computationally studied over a range of inlet Reynolds numbers (2400–12,000). The nature and frequency of the jet oscillations were quantified. The computed jet oscillation frequency was compared with the experimentally measured (using imaging techniques) jet oscillation frequency. The flow model was then used to quantitatively understand mixing, heat transfer, and residence time distribution. The approach and the results presented in this work will provide a basis for designing FO's with desired flow and transport characteristics for various engineering applications.
- 26 November 2019
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 59 (9) , 3943-3961
Passive Mixer cum Reactor Using Threaded Inserts: Investigations of Flow, Mixing, and Heat Transfer Characteristics
- 26 November 2019
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 59 (9) , 3943-3961
Passive Mixer cum Reactor Using Threaded Inserts: Investigations of Flow, Mixing, and Heat Transfer Characteristics
- 7 June 2019
- Published by Society of Petroleum Engineers (SPE) in SPE Production & Operations
- Vol. 34 (03) , 520-535
Computational and Experimental Study of Sand Entrapment in a Hydrocyclone During Desanding Operations in Oil Fields: Consequences for Leakage and Separation Efficiency
Summary: In the oil and gas industry, upstream and downstream hydrocyclones are used extensively to separate heavy or dense particles from the formation water/reservoir fluids. These hydrocyclones, after a long period of operation, can fail as a result of wear-initiated leakage, thereby needing maintenance or replacement. A detailed investigation of this failure was carried out using computational fluid dynamics (CFD). One-way and two-way coupling of a discrete phase model was used along with the Reynolds stress turbulence model (RSM). Experimental studies were conducted to understand the flow dynamics within the hydrocyclone and to validate the computational model. Key findings, such as bifurcation of the inlet flow, local acceleration of fluid within the hydrocyclone, the impact of the sand drain pipe on fractional efficiency, and the impact of multiple particle sizes and density interactions on the degree of particle entrapment, are discussed in detail. The approach and results presented in this work provide useful insights and a systematic basis for improving the service life and separation efficiency of the hydrocyclone.
- 7 June 2019
- Published by Society of Petroleum Engineers (SPE) in SPE Production & Operations
- Vol. 34 (03) , 520-535
Computational and Experimental Study of Sand Entrapment in a Hydrocyclone During Desanding Operations in Oil Fields: Consequences for Leakage and Separation Efficiency
Summary: In the oil and gas industry, upstream and downstream hydrocyclones are used extensively to separate heavy or dense particles from the formation water/reservoir fluids. These hydrocyclones, after a long period of operation, can fail as a result of wear-initiated leakage, thereby needing maintenance or replacement. A detailed investigation of this failure was carried out using computational fluid dynamics (CFD). One-way and two-way coupling of a discrete phase model was used along with the Reynolds stress turbulence model (RSM). Experimental studies were conducted to understand the flow dynamics within the hydrocyclone and to validate the computational model. Key findings, such as bifurcation of the inlet flow, local acceleration of fluid within the hydrocyclone, the impact of the sand drain pipe on fractional efficiency, and the impact of multiple particle sizes and density interactions on the degree of particle entrapment, are discussed in detail. The approach and results presented in this work provide useful insights and a systematic basis for improving the service life and separation efficiency of the hydrocyclone.
- 4 December 2018
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 97 (2) , 542-559
Flow, mixing, and heat transfer in fluidic oscillators
There is an increasing emphasis on process intensification and development of compact, intensified reactors and separators in recent years. Significant efforts are being made to develop such intensified reactors and separators without any moving parts. Some of the recent research studies have proven that a liquid‐liquid extractor based on the Coanda effect and feedback oscillations exhibit excellent mixing and liquid‐liquid contacting. These fluidic oscillators can potentially be used for a variety of other multiphase reactions and systems demanding enhanced mixing and heat and mass transfer. In this work, we have computationally investigated flow, mixing, and heat transfer in fluidic oscillators based on the Coanda effect. Available information on flow and mixing in fluidic oscillators was critically reviewed and key gaps in the available knowledge with respect to the design and optimization of fluidic oscillators were identified. Computational flow models were developed to characterize key flow features like unsteady flows, secondary vortices, and internal recirculation over a range of Reynolds number (Re = 90–1538) for three different oscillator designs. Systematic numerical studies were carried out to quantify different flow regimes, oscillations, and the influence of key geometric parameters on flow, mixing, and heat transfer. Simulated results were critically analyzed and are presented in the form of dimensionless numbers. The approach and results presented in this work will provide useful insights and a systematic basis for extending the applications of the Coanda‐based feedback oscillatory devices for a wide range of engineering applications.
- 4 December 2018
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 97 (2) , 542-559
Flow, mixing, and heat transfer in fluidic oscillators
There is an increasing emphasis on process intensification and development of compact, intensified reactors and separators in recent years. Significant efforts are being made to develop such intensified reactors and separators without any moving parts. Some of the recent research studies have proven that a liquid‐liquid extractor based on the Coanda effect and feedback oscillations exhibit excellent mixing and liquid‐liquid contacting. These fluidic oscillators can potentially be used for a variety of other multiphase reactions and systems demanding enhanced mixing and heat and mass transfer. In this work, we have computationally investigated flow, mixing, and heat transfer in fluidic oscillators based on the Coanda effect. Available information on flow and mixing in fluidic oscillators was critically reviewed and key gaps in the available knowledge with respect to the design and optimization of fluidic oscillators were identified. Computational flow models were developed to characterize key flow features like unsteady flows, secondary vortices, and internal recirculation over a range of Reynolds number (Re = 90–1538) for three different oscillator designs. Systematic numerical studies were carried out to quantify different flow regimes, oscillations, and the influence of key geometric parameters on flow, mixing, and heat transfer. Simulated results were critically analyzed and are presented in the form of dimensionless numbers. The approach and results presented in this work will provide useful insights and a systematic basis for extending the applications of the Coanda‐based feedback oscillatory devices for a wide range of engineering applications.