Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kristof Tirez has a total of 138 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Regeneration pH controls lithium recovery and titanium dissolution in H2TiO3/PVC composite beads

    by David Vogelsang, Kenny Wyns, Karlien Duyssens, Bart Michielsen, Kristof Tirez, Elena Seftel

  • Open Access

    A sonication-assisted method for the production of true-to-life nanoplastics from polymeric materials

    by Carlos Adelantado, Jasper Charlier, Nancy Dewit, Jan Jordens, Stefan Voorspoels, Kristof Tirez, Milica Velimirovic

    Worldwide plastic production has surpassed four hundred megatons over the last two years, this trend steadily rising and making plastic become one of the more serious environmental pollutants. While a wide knowledge is already existing about macroplastics, a recent and complex problem to tackle is degradation of these materials to micro- and nanoplastics. It has been demonstrated that organisms react in a different way to naturally degraded nanoplastics (NPs) when compared with NPs produced in the laboratory, the artificially created ones being more widely reported in research studies. As a consequence, new approaches need to be orientated towards NP release mimicking particles produced in the environment. The objective of this study is to develop and optimize a sonication-assisted method for degrading macroplastics and generating NPs from different real-life polymeric sources. Specimens of use were tire treads, polyethylene terephthalate (PET) bottles, high-density polystyrene (HDPS) and low-density polyethylene (LDPE). Special attention was paid to lessening the workload in the laboratory and minimising both contamination and thermal degradation. Every plastic-based item was cryogenically milled, and small amounts of the resulting powder were suspended in water and subjected to ultrasound treatment in a bath with an applied ultrasonic energy density of 7.0 kJ ml−1 (equivalent to 64 h of sonication at 160 W). Particle sizing was primarily performed with dynamic light scattering. Whereas LDPE showed a little sign of nanoparticle production, possibly due to energy input, PET and tyres released quantifiable amounts of nanoparticles after receiving 5.2 kJ ml−1 (equivalent to 48 h of sonication at 160 W) of ultrasonic energy density. Hydrodynamic diameters varied from 150 up to 300 nm for these two polymers. It was hypothesised that additives may prevent degradation to a certain extent, thus highlighting the necessity for increasing the total applied ultrasonic energy to promote plastic degradation.


  • Open Access

    An inorganic “non-targeted” characterization platform for comprehensive monitoring of elements in surface water

    by Kristof Tirez, Joni Dehaspe, Jeroen Van Stappen, Ingeborg Joris, Christine Vanhoof, Stefan Voorspoels, Johan Annys


  • Open Access

    An inorganic “non-targeted” characterization platform for comprehensive monitoring of elements in surface water

    by Kristof Tirez, Joni Dehaspe, Jeroen Van Stappen, Ingeborg Joris, Christine Vanhoof, Stefan Voorspoels, Johan Annys

    Background The concept of bioavailability influencing environmental risk from metals has gained European regulatory and scientific support, but routine implementation remains a challenge due to the scarcity of physico-chemical data obtained from national surface water monitoring networks for assessing metal complexation with abiotic ligands. It is essential to remain vigilant and to ensure that the narrow focus of our routine analytical equipment does not limit our perspective. The focus blinders in our surface water monitoring networks should not transform into vision blinders, preventing us from considering broader insights and possibilities. Thanks to advancements in analytical instrumentation and data processing capabilities, this study presents an inorganic “non-targeted” characterization platform for wide-eyed and high-quality surface water monitoring that is both time-efficient and cost-effective. Results This study evaluated the feasibility of a comprehensive inorganic quantitative non-target analysis combined with geochemical modeling as holistic monitoring, i.e., a complete and comprehensive characterization of matrix and trace elements in Flemish surface water samples. For this purpose, state-of-the-art inductively coupled plasma-tandem mass spectrometry (ICP-MS/MS) and Discrete Analyzer instrumentation were employed to perform quantitative analysis of (nearly) all elements in the periodic table. The obtained quantitative analysis data served as input for the PHREEQC geochemical model to calculate the chemical species of the elements and estimate the concentration of the free metal ion. For elements contributing to standard exceedances in Flemish waterways (e.g. Co), holistic monitoring can enhance understanding of their "(biological) availability" and ecological impact relative to environmental quality standards derived from chronic ecotoxicity data (NOEC or EC10). Different approaches to study the bioavailability of metal/metalloid species in freshwaters are compared, including the implementation of biotic ligand model-based approaches in risk assessment frameworks. Conclusion examples of the added value of holistic monitoring, i.e. coupling of a non-target characterization platform with geochemical modeling, are given in terms of i) improved analysis quality on the entire sample and not limited to individual analytes, ii) Improved data interpretation, not only the dissolved concentration per element but the concentration for each element species, iii) Proactive policy on future contaminants: analysis data of elements that are currently not monitored on a routine basis.


  • Open Access

    Exploring Pt-Pd Alloy Nanoparticle Cluster Formation through Conventional Sizing Techniques and Single-Particle Inductively Coupled Plasma—Sector Field Mass Spectrometry

    by Omar Martinez-Mora, Kristof Tirez, Filip Beutels, Wilfried Brusten, Luis F. Leon-Fernandez, Jan Fransaer, Xochitl Dominguez-Benetton, Milica Velimirovic

    Accurate characterization of Pt-Pd alloy nanoparticle clusters (NCs) is crucial for understanding their synthesis using Gas-Diffusion Electrocrystallization (GDEx). In this study, we propose a comprehensive approach that integrates conventional sizing techniques—scanning electron microscopy (SEM) and dynamic light scattering (DLS)—with innovative single-particle inductively coupled plasma—sector field mass spectrometry (spICP-SFMS) to investigate Pt-Pd alloy NC formation. SEM and DLS provide insights into morphology and hydrodynamic sizes, while spICP-SFMS elucidates the particle size and distribution of Pt-Pd alloy NCs, offering rapid and orthogonal characterization. The spICP-SFMS approach presented enables detailed characterization of Pt-Pd alloy NCs, which was previously challenging due to the absence of multi-element capabilities in conventional spICP-MS systems. This innovative approach not only enhances our understanding of bimetallic nanoparticle synthesis, but also paves the way for tailoring these materials for specific applications, marking a significant advancement in the field of nanomaterial science.


  • Open Access

    Platinum nanoclusters made by gas-diffusion electrocrystallization (GDEx) as electrocatalysts for methanol oxidation

    by Omar Martinez-Mora, Luis Fernando Leon-Fernandez, Milica Velimirovic, Frank Vanhaecke, Kristof Tirez, Jan Fransaer, Xochitl Dominguez-Benetton

    High-performance electrocatalysts is critical for enhancing the performance and commercial viability of direct methanol fuel cells (DMFCs), which hold the potential to transform the way we power portable electronics and off-grid systems.


  • Open Access

    Characterization of Gold Nanorods Conjugated with Synthetic Glycopolymers Using an Analytical Approach Based on spICP-SFMS and EAF4-MALS

    by Milica Velimirovic, Alessia Pancaro, Robert Mildner, Panagiotis G. Georgiou, Kristof Tirez, Inge Nelissen, Christoph Johann, Matthew I. Gibson, Frank Vanhaecke

    A new comprehensive analytical approach based on single-particle inductively coupled plasma-sector field mass spectrometry (spICP-SFMS) and electrical asymmetric-flow field-flow-fractionation combined with multi-angle light scattering detection (EAF4-MALS) has been examined for the characterization of galactosamine-terminated poly(N-hydroxyethyl acrylamide)-coated gold nanorods (GNRs) in two different degrees of polymerization (DP) by tuning the feed ratio (short: DP 35; long: DP 60). spICP-SFMS provided information on the particle number concentration, size and size distribution of the GNRs, and was found to be useful as an orthogonal method for fast characterization of GNRs. Glycoconjugated GNRs were separated and characterized via EAF4-MALS in terms of their size and charge and compared to the bare GNRs. In contrast to spICP-SFMS, EAF4-MALS was also able of providing an estimate of the thickness of the glycopolymer coating on the GNRs surface.


  • Mass spectrometry as a powerful analytical tool for the characterization of indoor airborne microplastics and nanoplastics

    by Milica Velimirovic, Kristof Tirez, Sandra Verstraelen, Evelien Frijns, Sylvie Remy, Gudrun Koppen, Anna Rotander, Eduardo Bolea-Fernandez, Frank Vanhaecke

    Development of analytical methods for the characterization (particle size determination, chemical identification, and quantification) of the low μm-range microplastics (MPs; 1–10 μm) and nanoplastics (NPs; 1 nm to 1 μm) in air – coarse (PM10; 2.5; 1; <1 μm) particulate matter – is a quickly emerging scientific field as inhalation has been identified as one of the main routes of human exposure. The respiratory tract may serve as both target tissue and port of entry to the systemic circulation for the inhaled MPs and NPs with their small particle size. As an outcome, the interest of the scientific community, policy makers, and the general public in indoor airborne MPs and NPs increased tremendously. However, there is a lack of detailed knowledge on the indoor and outdoor sources of MPs and NPs, their levels, and their health impact. This is mainly related to a lack of standardized sampling and analytical methods for size determination, chemical identification, and quantification. In this review, recent developments in mass spectrometry-based analytical methods for size determination, chemical identification, and quantification of the MPs and NPs in indoor air and dust, are discussed.


  • Open Access

    Joint Forces of HR-Spicp-MS and EAF4-MALS for Characterization of Gold Nanorods Conjugated with Synthetic Glycopolymers

    by Milica Velimirovic, Alessia Pancaro, Robert Mildner, Panagiotis G. Georgiou, Kristof Tirez, Inge Nelissen, Christoph Johann, Matthew I. Gibson, Frank Vanhaecke

    As the diversity of nanomaterials is wide and their size can vary by 2 orders of magnitude (1−100 nm), the development of new and advanced analytical tools for their in-depth characterization is of paramount importance, allowing a fundamental understanding of their structure, further alteration and degree of chemical surface functionalization. Herein, we present a new strategy for characterization of gold nanorods (GNRs) that are of specific interest for biomedical applications due to their unique size-dependent longitudinal surface plasmon resonance band in the visible to near-infrared spectral region. More precisely, we characterized GNRs conjugated with short and long synthetic glycopolymers for biosensing of lectins in terms of particle size, coating thickness, and/or mobility properties in comparison with the bare GNRs. This endeavor requires a multidisciplinary approach including a new comprehensive set of fit-for-purpose analytical tools being high-resolution single-particle inductively coupled plasma-mass spectrometry (HR-spICP-MS) and electrical asymmetric-flow field-flow-fractionation hyphenated to a multi-angle light scattering detector (EAF4-MALS). GNRs were separated and characterized via EAF4-MALS in terms of their size and charge, while HR-spICP-MS provided information on the particle number density, size, size distribution, and the dimensional characterization. In addition, EAF4-MALS appears to be suitable for estimating coating thickness of glycoconjugated GNRs.