Shixiong Deng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Shixiong Deng has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Xuanwu Kang
Institute of Microelectronics of Chinese Academy of Sciences, Beijing, China
3 shared publications - Hao Wu
Institute of Microelectronics of Chinese Academy of Sciences, Beijing, China
2 shared publications - Ke Wei
Institute of Microelectronics, Chinese Academy of Sciences 2 , Beijing 100029
2 shared publications - Rikang Zhao
College of Electronic and Information Engineering, Shandong University of Science and Technology, Qingdao 266590, China
2 shared publications - Xinyu Liu
Chinese Academy of Sciences
2 shared publications Yingkui Zheng
Institute of Microelectronics of Chinese Academy of Sciences, Beijing, China
2 shared publications
Latest Publications
- 21 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (1) , 57-60
High-Power GaN SBD Limiter for Sub-6G With Fast Response and Recovery
In this letter, a multistage high-power RF limiter based on a thin-barrier AlGaN/GaN Schottky barrier diode (SBD) has been proposed and demonstrated in 2–6 GHz. By multifinger device layout design with increased total anode width, the on resistance of the diode reduces drastically and the maximum RF current can be increased, resulting in an increase of the power capacity of the limiter. In addition, benefiting from the thin-barrier epitaxial design and plasma-damage-free SBD device fabrication, the response time and recovery time of the limiter can be reduced, as well. By incorporating the fabricated devices with a well-designed matching circuit, the RF limiter obtains high incident power above 50 W in continuous wave (CW) mode, over 100 W in pulse mode, a fast recovery time of 35 ns, and spike leakage free at 4 GHz. The simulation and measurement results are well-agreed with each other. This demonstration shows that the GaN-SBD-based limiter is promising for future high-power and high-frequency applications.
- 21 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (1) , 57-60
High-Power GaN SBD Limiter for Sub-6G With Fast Response and Recovery
In this letter, a multistage high-power RF limiter based on a thin-barrier AlGaN/GaN Schottky barrier diode (SBD) has been proposed and demonstrated in 2–6 GHz. By multifinger device layout design with increased total anode width, the on resistance of the diode reduces drastically and the maximum RF current can be increased, resulting in an increase of the power capacity of the limiter. In addition, benefiting from the thin-barrier epitaxial design and plasma-damage-free SBD device fabrication, the response time and recovery time of the limiter can be reduced, as well. By incorporating the fabricated devices with a well-designed matching circuit, the RF limiter obtains high incident power above 50 W in continuous wave (CW) mode, over 100 W in pulse mode, a fast recovery time of 35 ns, and spike leakage free at 4 GHz. The simulation and measurement results are well-agreed with each other. This demonstration shows that the GaN-SBD-based limiter is promising for future high-power and high-frequency applications.
- Open Access
- 22 January 2023
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 59 (2)
A microwave limiter with non‐reciprocal limiting threshold
A novel microwave limiter with non‐reciprocal limiting threshold is proposed in this paper to protect the transceiver switch or the transmitter. The directivity of the directional coupler is utilized to make the power of the received signal input to the detection circuit larger than that of the transmitted signal, thereby the detection circuit provides different DC bias voltages to the limiter circuit and changes the threshold level of the limiter diode. The test results show that this limiter has a threshold level of 35 dBm for the transmitted signal and 17 dBm for the received signal, which has a non‐reciprocal limiting threshold for high‐power signals input in both directions.
- 22 January 2023
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 59 (2)
Open AccessA microwave limiter with non‐reciprocal limiting threshold
A novel microwave limiter with non‐reciprocal limiting threshold is proposed in this paper to protect the transceiver switch or the transmitter. The directivity of the directional coupler is utilized to make the power of the received signal input to the detection circuit larger than that of the transmitted signal, thereby the detection circuit provides different DC bias voltages to the limiter circuit and changes the threshold level of the limiter diode. The test results show that this limiter has a threshold level of 35 dBm for the transmitted signal and 17 dBm for the received signal, which has a non‐reciprocal limiting threshold for high‐power signals input in both directions.
- 23 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 33 (2) , 208-211
High-Power Microwave Limiters Using Recess-Free AlGaN/GaN Schottky Barrier Diodes
In this letter, a thin-barrier AlGaN/GaN Schottky barrier diode (SBD) is proposed and implemented in a three-stage high-power RF limiter module. Benefited from the thin-barrier epitaxy, a recess-free process in the Schottky region is allowed to avoid the plasma damage, resulting in low on-resistance of 5 $\Omega $ and high withstand voltage characteristics. In addition, the proposed SBDs have achieved a low junction capacitance of 0.35 pF at 0 V bias and a turn-on voltage of 0.5 V. With the optimized SBD and well-designed matching circuits, the limiter has reached a high power capacity of over 10 W in continuous wave (CW), 20 W in pulse mode, and a fast recovery time of 30 ns at a frequency of 3.5 GHz, exhibiting better characteristics than traditional limiters. Both simulation and measured results agree with each other. It indicates that the AlGaN/GaN-based SBD is promising for high-power and high-frequency limiters.
- 23 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 33 (2) , 208-211
High-Power Microwave Limiters Using Recess-Free AlGaN/GaN Schottky Barrier Diodes
In this letter, a thin-barrier AlGaN/GaN Schottky barrier diode (SBD) is proposed and implemented in a three-stage high-power RF limiter module. Benefited from the thin-barrier epitaxy, a recess-free process in the Schottky region is allowed to avoid the plasma damage, resulting in low on-resistance of 5 $\Omega $ and high withstand voltage characteristics. In addition, the proposed SBDs have achieved a low junction capacitance of 0.35 pF at 0 V bias and a turn-on voltage of 0.5 V. With the optimized SBD and well-designed matching circuits, the limiter has reached a high power capacity of over 10 W in continuous wave (CW), 20 W in pulse mode, and a fast recovery time of 30 ns at a frequency of 3.5 GHz, exhibiting better characteristics than traditional limiters. Both simulation and measured results agree with each other. It indicates that the AlGaN/GaN-based SBD is promising for high-power and high-frequency limiters.
- Open Access
- 10 February 2021
- Published by MDPI AG in Electronics
- Vol. 10 (4) , 433
First Demonstration of L-Band High-Power Limiter with GaN Schottky Barrier Diodes (SBDs) Based on Steep-Mesa Technology
Gallium nitride (GaN) has attracted increased attention because of superior material properties, such as high electron saturation velocity and high electrical field strength, which are promising for high-power microwave applications. We report on a high-performance vertical GaN-based Schottky barrier diode (SBD) and its demonstration in a microwave power limiter for the first time. The fabricated SBD achieved a very low differential specific on-resistance (RON,sp) of 0.21 mΩ·cm2, attributed to the steep-mesa technology, which assists in reducing the spacing between the edge of the anode and cathode to 2 μm. Meanwhile, a low leakage current of ~10−9 A/cm2@−10 V, a high forward current density of 9.4 kA/cm2 at 3 V in DC, and an ideality factor of 1.04 were achieved. Scattering parameter measurements showed that the insertion loss (S21) was lower than −3 dB until 3 GHz. In addition, a microwave power limiter circuit with two anti-parallel diodes was built and measured on an alumina substrate. The input power level reached 40 dBm (10 watts) in continuous-wave mode at 2 GHz, with a corresponding leakage power of 27.2 dBm (0.5 watts) at the output port of the limiter, exhibiting the great potential of GaN SBD in microwave power limiters.
- 10 February 2021
- Published by MDPI AG in Electronics
- Vol. 10 (4) , 433
Open AccessFirst Demonstration of L-Band High-Power Limiter with GaN Schottky Barrier Diodes (SBDs) Based on Steep-Mesa Technology
Gallium nitride (GaN) has attracted increased attention because of superior material properties, such as high electron saturation velocity and high electrical field strength, which are promising for high-power microwave applications. We report on a high-performance vertical GaN-based Schottky barrier diode (SBD) and its demonstration in a microwave power limiter for the first time. The fabricated SBD achieved a very low differential specific on-resistance (RON,sp) of 0.21 mΩ·cm2, attributed to the steep-mesa technology, which assists in reducing the spacing between the edge of the anode and cathode to 2 μm. Meanwhile, a low leakage current of ~10−9 A/cm2@−10 V, a high forward current density of 9.4 kA/cm2 at 3 V in DC, and an ideality factor of 1.04 were achieved. Scattering parameter measurements showed that the insertion loss (S21) was lower than −3 dB until 3 GHz. In addition, a microwave power limiter circuit with two anti-parallel diodes was built and measured on an alumina substrate. The input power level reached 40 dBm (10 watts) in continuous-wave mode at 2 GHz, with a corresponding leakage power of 27.2 dBm (0.5 watts) at the output port of the limiter, exhibiting the great potential of GaN SBD in microwave power limiters.
- 1 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1244-1246
Design of a slice style Ka-band Envelope Detector
A slice style structure Ka band envelope detector for high power detection is designed. The center frequency is 35GHz and the bandwidth is 4GHz. The WR28 transmission waveguide, probe coupling and ceramic substrate detection circuit were mixed and integrated to construct the slice style structure with a thickness of 3mm. High frequency electromagnetic field HFSS simulation software and microwave circuit ADS software are used to simulate and optimize the probe coupling, impedance matching and low-pass filtering circuit to complete the design of envelope detector. The test results show that the slice style detector designed by this method has high integration, wide working frequency band, good linearity and excellent performance.
- 1 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1244-1246
Design of a slice style Ka-band Envelope Detector
A slice style structure Ka band envelope detector for high power detection is designed. The center frequency is 35GHz and the bandwidth is 4GHz. The WR28 transmission waveguide, probe coupling and ceramic substrate detection circuit were mixed and integrated to construct the slice style structure with a thickness of 3mm. High frequency electromagnetic field HFSS simulation software and microwave circuit ADS software are used to simulate and optimize the probe coupling, impedance matching and low-pass filtering circuit to complete the design of envelope detector. The test results show that the slice style detector designed by this method has high integration, wide working frequency band, good linearity and excellent performance.