Wataru Norimatsu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Wataru Norimatsu has a total of 161 co-authors. Here are the top co-authors by number of shared publications:
Michiko Kusunoki
Institute of Materials and Systems for Sustainability, Nagoya University 3 , Nagoya 464-8603, Japan
41 shared publicationsJianfeng Bao
Department of Materials Science and Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya, Aichi, Nagoya, 464-8603, JAPAN
8 shared publications- Keita Matsuda
Department of Applied Chemistry, Graduate School of Engineering, Nagoya University 2 , Nagoya 464-8603, Japan
7 shared publications Chunlei Wan
6 shared publications- Michiko Kusunoki
Nagoya University, Nagoya, Aichi 464-8603, Japan
6 shared publications Yifeng Wang
6 shared publications
Latest Publications
- Open Access
- 14 March 2026
- Published by Wiley in Small Methods
- Vol. 10 (8) , e01889
2D Iron Oxide at the Graphene/SiC(0001) Interface
Fabrication of two‐dimensional (2D) transition‐metal oxides has gained considerable attention due to their unique crystal structures and physical properties distinct from their bulk counterparts. Intercalation of foreign elements into the graphene/SiC(0001) interface is a possible approach for achieving this, as it enables the confinement and arrangement of atoms within the 2D interface. However, while various 2D metals and their compounds have been synthesized at the graphene/SiC interface, the fabrication of 2D transition‐metal compounds remains challenging. This difficulty arises from the high reactivity of transition metals such as Fe, Co, and Ni, which readily form carbides and silicides with the host material. In this work, the fabrication of a 2D iron oxide at the graphene/SiC interface is demonstrated through the simultaneous intercalation of Fe and O. Direct observation using atomic‐resolution electron microscopy revealed that the crystalline 2D iron oxide is encapsulated by graphene and forms a sharp interface with the SiC substrate. Structural analysis and Mössbauer spectroscopy suggest that the 2D iron oxide exhibits a wüstite‐like structure. These findings provide another strategy for synthesizing 2D transition‐metal oxides, opening new avenues for the advancement of 2D magnetic materials.
- 14 March 2026
- Published by Wiley in Small Methods
- Vol. 10 (8) , e01889
Open Access2D Iron Oxide at the Graphene/SiC(0001) Interface
Fabrication of two‐dimensional (2D) transition‐metal oxides has gained considerable attention due to their unique crystal structures and physical properties distinct from their bulk counterparts. Intercalation of foreign elements into the graphene/SiC(0001) interface is a possible approach for achieving this, as it enables the confinement and arrangement of atoms within the 2D interface. However, while various 2D metals and their compounds have been synthesized at the graphene/SiC interface, the fabrication of 2D transition‐metal compounds remains challenging. This difficulty arises from the high reactivity of transition metals such as Fe, Co, and Ni, which readily form carbides and silicides with the host material. In this work, the fabrication of a 2D iron oxide at the graphene/SiC interface is demonstrated through the simultaneous intercalation of Fe and O. Direct observation using atomic‐resolution electron microscopy revealed that the crystalline 2D iron oxide is encapsulated by graphene and forms a sharp interface with the SiC substrate. Structural analysis and Mössbauer spectroscopy suggest that the 2D iron oxide exhibits a wüstite‐like structure. These findings provide another strategy for synthesizing 2D transition‐metal oxides, opening new avenues for the advancement of 2D magnetic materials.
- Open Access
- 28 February 2026
- Published by The Crystallographic Society of Japan in Nihon Kessho Gakkaishi
- Vol. 68 (1) , 26-32
Crystal Growth, New Phenomena, and New Functions in the Gap Between Two and Three Dimensions
- 28 February 2026
- Published by The Crystallographic Society of Japan in Nihon Kessho Gakkaishi
- Vol. 68 (1) , 26-32
Open AccessCrystal Growth, New Phenomena, and New Functions in the Gap Between Two and Three Dimensions
- 25 August 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (8)
Suppression of step bunching in graphene growth on 4° off-axis SiC (0001) by a two-step growth technique
Step bunching during graphene growth on 4° off-axis SiC (0001) was effectively suppressed using a two-step growth technique. In the first step, a graphene buffer layer was obtained under vacuum. In the following step, additional graphene layers were grown under an argon atmosphere at atmospheric pressure, with good control over the number of layers. The first-step layer played a key role in suppressing step bunching during the second step, resulting in a one-order-of-magnitude reduction in surface roughness compared to a conventional growth method exclusively using an argon atmosphere. The effect of the off-angle on step bunching was also investigated by analyzing the differences between on-axis and 4° off-axis substrates. Our findings suggest that atomic diffusion is restricted by the presence of the graphene buffer layer.
- 25 August 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (8)
Suppression of step bunching in graphene growth on 4° off-axis SiC (0001) by a two-step growth technique
Step bunching during graphene growth on 4° off-axis SiC (0001) was effectively suppressed using a two-step growth technique. In the first step, a graphene buffer layer was obtained under vacuum. In the following step, additional graphene layers were grown under an argon atmosphere at atmospheric pressure, with good control over the number of layers. The first-step layer played a key role in suppressing step bunching during the second step, resulting in a one-order-of-magnitude reduction in surface roughness compared to a conventional growth method exclusively using an argon atmosphere. The effect of the off-angle on step bunching was also investigated by analyzing the differences between on-axis and 4° off-axis substrates. Our findings suggest that atomic diffusion is restricted by the presence of the graphene buffer layer.
- 15 October 2024
- Published by Springer Nature
- p. 33-43
Li+ Insertion and Extraction Mechanism at Epitaxial Graphene/Solid-State Electrolyte Interfaces
- 15 October 2024
- Published by Springer Nature
- p. 33-43
Li+ Insertion and Extraction Mechanism at Epitaxial Graphene/Solid-State Electrolyte Interfaces
- Open Access
A Review on Carrier Mobilities of Epitaxial Graphene on Silicon Carbide
Graphene growth by thermal decomposition of silicon carbide (SiC) is a technique that produces wafer-scale, single-orientation graphene on an insulating substrate. It is often referred to as epigraphene, and has been thought to be suitable for electronics applications. In particular, high-frequency devices for communication technology or large quantum Hall plateau for metrology applications using epigraphene are expected, which require high carrier mobility. However, the carrier mobility of as-grown epigraphene exhibit the relatively low values of about 1000 cm2/Vs. Fortunately, we can hope to improve this situation by controlling the electronic state of epigraphene by modifying the surface and interface structures. In this paper, the mobility of epigraphene and the factors that govern it will be described, followed by a discussion of attempts that have been made to improve mobility in this field. These understandings are of great importance for next-generation high-speed electronics using graphene.
Open AccessA Review on Carrier Mobilities of Epitaxial Graphene on Silicon Carbide
Graphene growth by thermal decomposition of silicon carbide (SiC) is a technique that produces wafer-scale, single-orientation graphene on an insulating substrate. It is often referred to as epigraphene, and has been thought to be suitable for electronics applications. In particular, high-frequency devices for communication technology or large quantum Hall plateau for metrology applications using epigraphene are expected, which require high carrier mobility. However, the carrier mobility of as-grown epigraphene exhibit the relatively low values of about 1000 cm2/Vs. Fortunately, we can hope to improve this situation by controlling the electronic state of epigraphene by modifying the surface and interface structures. In this paper, the mobility of epigraphene and the factors that govern it will be described, followed by a discussion of attempts that have been made to improve mobility in this field. These understandings are of great importance for next-generation high-speed electronics using graphene.
- Open Access
- 17 July 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (3)
Step unbunching phenomenon on 4H-SiC (0001) surface during hydrogen etching
We here report a step unbunching phenomenon, which is the inverse of the phenomenon of step bunching. When a 4H-SiC (0001) surface is annealed at a high temperature, step bunching arises due to the different velocities of the step motion in adjacent steps, resulting in steps with a height of more than several nanometers. We found that the bunched steps, thus, obtained by hydrogen etching in an Ar/H2 atmosphere were “unbunched” into lower height steps when annealed subsequently at lower temperatures. This unbunching phenomenon can be well explained by the consequence of the competition between energetics and kinetics. Our findings provide another approach for the surface smoothing of SiC by hydrogen etching and may give significant insight into the application of SiC power devices and two-dimensional materials growth techniques in general.
- 17 July 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (3)
Open AccessStep unbunching phenomenon on 4H-SiC (0001) surface during hydrogen etching
We here report a step unbunching phenomenon, which is the inverse of the phenomenon of step bunching. When a 4H-SiC (0001) surface is annealed at a high temperature, step bunching arises due to the different velocities of the step motion in adjacent steps, resulting in steps with a height of more than several nanometers. We found that the bunched steps, thus, obtained by hydrogen etching in an Ar/H2 atmosphere were “unbunched” into lower height steps when annealed subsequently at lower temperatures. This unbunching phenomenon can be well explained by the consequence of the competition between energetics and kinetics. Our findings provide another approach for the surface smoothing of SiC by hydrogen etching and may give significant insight into the application of SiC power devices and two-dimensional materials growth techniques in general.
- 26 June 2023
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 35 (38) , 385001
Control of rotation angles of multilayer graphene on SiC (000 1‾ ) by substrate off-direction and angle
Graphene on SiC (000 1 ‾ ) tends to grow in multiple layers and does not have a single orientation relation with the SiC substrate. It has been considered impossible to control the rotation angle of multilayer graphene on SiC (000 1 ‾ ). In this study, we grew graphene on off-axis SiC substrates with various off angles from 0° to 8° and investigated their in-plane rotation and electronic structures systematically. As the off angle toward the [11 2 ‾ 0]SiC direction increased, graphene rotated by 30° with respect to SiC became less dominant and instead, graphene rotated by 30 ± 2.5° appeared. We also found that the uniformity of the graphene rotation angle was relatively high on SiC substrates with a small off angle toward the [1 1 ‾ 00]SiC direction. Our results suggest that the step-terrace structure defined by the substrate off-direction and angle plays an important role in the controllability of the rotation angle of graphene.
- 26 June 2023
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 35 (38) , 385001
Control of rotation angles of multilayer graphene on SiC (000 1‾ ) by substrate off-direction and angle
Graphene on SiC (000 1 ‾ ) tends to grow in multiple layers and does not have a single orientation relation with the SiC substrate. It has been considered impossible to control the rotation angle of multilayer graphene on SiC (000 1 ‾ ). In this study, we grew graphene on off-axis SiC substrates with various off angles from 0° to 8° and investigated their in-plane rotation and electronic structures systematically. As the off angle toward the [11 2 ‾ 0]SiC direction increased, graphene rotated by 30° with respect to SiC became less dominant and instead, graphene rotated by 30 ± 2.5° appeared. We also found that the uniformity of the graphene rotation angle was relatively high on SiC substrates with a small off angle toward the [1 1 ‾ 00]SiC direction. Our results suggest that the step-terrace structure defined by the substrate off-direction and angle plays an important role in the controllability of the rotation angle of graphene.
- Open Access
- 10 January 2023
- Published by Surface Science Society Japan in Vacuum and Surface Science
- Vol. 66 (1) , 16-21
Millimeter-scale Magic-angle Twisted Bilayer Graphene and Its Electronic Structure
Twisted bilayer graphene with the magic-angle 1.1° exhibited superconductivity due to the large density of states at the energy of the flat band. Generally, experiments on twisted bilayer graphene have been performed using micrometer-scale samples. For device applications, fabrication of large-scale twisted bilayer graphene is required. In this paper, I report on the fabrication of the millimeter-scale magic-angle twisted bilayer graphene sample and the observation of its flat band using angle-resolved photoemission spectroscopy measurements.
- 10 January 2023
- Published by Surface Science Society Japan in Vacuum and Surface Science
- Vol. 66 (1) , 16-21
Open AccessMillimeter-scale Magic-angle Twisted Bilayer Graphene and Its Electronic Structure
Twisted bilayer graphene with the magic-angle 1.1° exhibited superconductivity due to the large density of states at the energy of the flat band. Generally, experiments on twisted bilayer graphene have been performed using micrometer-scale samples. For device applications, fabrication of large-scale twisted bilayer graphene is required. In this paper, I report on the fabrication of the millimeter-scale magic-angle twisted bilayer graphene sample and the observation of its flat band using angle-resolved photoemission spectroscopy measurements.
- Open Access
- 14 December 2021
- Published by Springer Nature in Communications Materials
- Vol. 2 (1) , 1-6
Observation of a flat band and bandgap in millimeter-scale twisted bilayer graphene
Magic-angle twisted bilayer graphene, consisting of two graphene layers stacked at a special angle, exhibits superconductivity due to the maximized density of states at the energy of the flat band. Generally, experiments on twisted bilayer graphene have been performed using micrometer-scale samples. Here we report the fabrication of twisted bilayer graphene with an area exceeding 3 × 5 mm2 by transferring epitaxial graphene onto another epitaxial graphene, and observation of a flat band and large bandgap using angle-resolved photoemission spectroscopy. Our results suggest that the substrate potential induces both the asymmetrical doping in large angle twisted bilayer graphene and the electron doped nature of the flat band in magic-angle twisted bilayer graphene.
- 14 December 2021
- Published by Springer Nature in Communications Materials
- Vol. 2 (1) , 1-6
Open AccessObservation of a flat band and bandgap in millimeter-scale twisted bilayer graphene
Magic-angle twisted bilayer graphene, consisting of two graphene layers stacked at a special angle, exhibits superconductivity due to the maximized density of states at the energy of the flat band. Generally, experiments on twisted bilayer graphene have been performed using micrometer-scale samples. Here we report the fabrication of twisted bilayer graphene with an area exceeding 3 × 5 mm2 by transferring epitaxial graphene onto another epitaxial graphene, and observation of a flat band and large bandgap using angle-resolved photoemission spectroscopy. Our results suggest that the substrate potential induces both the asymmetrical doping in large angle twisted bilayer graphene and the electron doped nature of the flat band in magic-angle twisted bilayer graphene.
- 17 January 2020
- Published by IOP Publishing in Nanotechnology
- Vol. 31 (14) , 145711
Controlled growth of boron-doped epitaxial graphene by thermal decomposition of a B 4 C thin film
We show that boron-doped epitaxial graphene can be successfully grown by thermal decomposition of a boron carbide thin film, which can also be epitaxially grown on a silicon carbide substrate. The interfaces of B 4 C on SiC and graphene on B 4 C had a fixed orientation relation, having a local stable structure with no dangling bonds. The first carbon layer on B 4 C acts as a buffer layer, and the overlaying carbon layers are graphene. Graphene on B 4 C was highly boron doped, and the hole concentration could be controlled over a wide range of 2 × 10 13 to 2 × 10 15 cm −2 . Highly boron-doped graphene exhibited a spin-glass behavior, which suggests the presence of local antiferromagnetic ordering in the spin-frustration system. Thermal decomposition of carbides holds the promise of being a technique to obtain a new class of wafer-scale functional epitaxial graphene for various applications.
- 17 January 2020
- Published by IOP Publishing in Nanotechnology
- Vol. 31 (14) , 145711
Controlled growth of boron-doped epitaxial graphene by thermal decomposition of a B 4 C thin film
We show that boron-doped epitaxial graphene can be successfully grown by thermal decomposition of a boron carbide thin film, which can also be epitaxially grown on a silicon carbide substrate. The interfaces of B 4 C on SiC and graphene on B 4 C had a fixed orientation relation, having a local stable structure with no dangling bonds. The first carbon layer on B 4 C acts as a buffer layer, and the overlaying carbon layers are graphene. Graphene on B 4 C was highly boron doped, and the hole concentration could be controlled over a wide range of 2 × 10 13 to 2 × 10 15 cm −2 . Highly boron-doped graphene exhibited a spin-glass behavior, which suggests the presence of local antiferromagnetic ordering in the spin-frustration system. Thermal decomposition of carbides holds the promise of being a technique to obtain a new class of wafer-scale functional epitaxial graphene for various applications.