RERasha Samir El-Tawil

Rasha Samir El-Tawil

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rasha Samir El-Tawil has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comparative study on the role of extracts of male and female of jojoba’s leaves in the green synthesis of α-MnO2 as an antimicrobial agent

    by Somia M. Abbas, Rasha S. El-Tawil, Hanaa M. Abuzeid, Ashraf E. Abdel-Ghany, Mohamed S. Abdel-Aziz, Ahmed M. Hashem

    The green synthesis method is a predominant trend as it is an ecofriendly, cleaner, scalable, and cheaper method and viable to form biocompatible NPsrather than the traditional methods. Jojoba plant is a natural and strong antioxidant as it contains phenolic and flavonoids compounds.Since male and female jojoba plants are known to differ in enzymatic and non-enzymatic antioxidant activity and phytochemical composition, this comparison was designed to test whether such sex-linked phytochemical variability translates into measurable differences in the structural, morphological, and antimicrobial properties of the resulting MnO 2 nanoparticles. This study focuses on preparation of MnO 2 nanoparticles using the extract of male (M-MnO 2 ) and female (F-MnO 2 ) jojoba ’ s leavesand to evaluate theirantimicrobialactivity.The prepared samples were characterized using X-ray diffraction (XRD), energy dispersive X-ray (EDX) and Thermal analyses (TGA & DTG) to assess their structural and physicochemical properties. The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) also used to assess the morphology and microstructure evolution. The X-ray diffraction analysis confirmed the cryptomelane-type α-MnO 2 phase for both samples distinguished by its characteristic (2 × 2) tunnel framework capable of hosting potassium ions within the crystal lattice. The microstructure analyses also reveal the nanocrystalline nature with flake morphology of MnO 2 NPs that enhances the surface reactivity helping in improving the antimicrobial performance.The antimicrobial efficacy of the two samples (M-MnO 2 and F-MnO 2 ) was evaluated throughtheCup Diffusion Agar Method and the Colony Forming Unit (CFU) Assay using Four representative microorganisms were selected for testing: Staphylococcus aureus ATCC 6538-P (Gram-positive bacterium), Escherichia coli ATCC 25,933 (Gram-negative bacterium), Candida albicans ATCC 10,231 (yeast), and Aspergillusniger NRRL-A326 (filamentous fungus).The findings of this research highlight sample F-MnO 2 as a potential antimicrobial agent with higher percent of the inhibition zones and higher reduction percent of the number of colonies formation.


  • Open Access

    Nanostructured Cathode Materials for Rechargeable Lithium-Ion Batteries: Synthesis, Morphology, and Performances

    by Rasha S. El-Tawil, Ashraf E. Abdel-Ghany, Ahmed M. Hashem, Alain Mauger, Christian M. Julien

    High-performance energy sources for electric vehicles and portable electronic devices require state-of-the-art lithium-ion batteries (LIBs) characterized by high energy density, superior power output, and excellent long-term cycling stability. Among the various components of LIBs, the cathode material plays a decisive role in determining the electrochemical performance, safety, and commercial viability of the battery. To meet the growing demands of modern applications, these materials must combine high capacity with structural stability, thermal safety, cost-effectiveness, and excellent rate capability. This article reviews the most widely used cathode materials with layered, spinel, and olivine structures. Their key advantages and intrinsic limitations are analyzed in detail, alongside strategies to enhance performance through elemental doping and surface coating approaches. Furthermore, the review presents simple, cost-effective, and industrially scalable synthesis methods, and highlights advanced characterization techniques that provide a deeper understanding of their nanostructured features and electrochemical behavior.


  • Open Access

    Nanostructured Cathode Materials for Rechargeable Lithium-Ion Batteries: Synthesis, Morphology, and Performances

    by Rasha S. El-Tawil, Ashraf E. Abdel-Ghany, Ahmed M. Hashem, Alain Mauger, Christian M. Julien

    High-efficiency energy sources for electric vehicles and portable electronic devices require advanced lithium-ion batteries (LIBs) with high energy density, superior power capability, and long-term cycling stability. Among the various components of LIBs, the cathode material plays a pivotal role in determining the electrochemical performance, safety, and commercial viability of the battery. To meet the growing demands of modern applications, cathode materials must combine high capacity with structural stability, thermal safety, cost-effectiveness, and excellent rate capability. This article reviews the most widely used cathode materials with layered and spinel structures. Their key advantages and inherent limitations are discussed in detail, together with strategies aimed at improving their performance through elemental doping and surface coating approaches. In addition, the review summarizes facile, scalable, and cost-effective synthesis methods for these cathode materials and highlights advances characterization techniques employed to achieve a deeper understanding of their nanostructured features and electrochemical behavior.


  • Open Access

    Feldspar/MnO2 composite as adsorbent for Pb2+ and Cd2+ removal from aqueous solution

    by Shaimaa T. El-Wakeel, Rasha S. El-Tawil, Ashraf E. Abdel-Ghany, Hanaa A. M. Abuzeid, Ahmed M. Hashem

    Increasing the adsorption efficiency of feldspar is the main target of this study. This was achieved by synthesizing new composite from feldspar and nanosized MnO2 by immersion natural feldspar in green-synthesized MnO2. This composite was characterized and confirmed by X-ray diffraction (XRD), transmission electron microscope (TEM), Fourier transform infrared (FTIR) and specific surface area by Brunauer–Emmett–Teller (BET). Rietveld XRD showed that the ratio percentage of feldspar, MnO2, was 61.7 and 38.3 which is very close to the intended ratio of 60:40, respectively. TEM showed clearly that nanosized MnO2 were distributed on and among big particles of feldspar and increased the surface area of the composite as estimated from BET measurements. The adsorption capacity of Pb2+ and Cd2+ ions by this unique composite of feldspar/MnO2 (FLS/MnO2) was carried out using batch adsorption experiments to explore the influence of contact time, initial metals concentrations, initial pH, temperature and adsorbent dose on the efficiency of removal of these ions. This study succeeded to synthesize unique composite of feldspar/MnO2 and hence enrich the adsorption efficiency of natural feldspar by this simple technique to be 99% and 98%, for removal Pb2+ and Cd2+ ions, respectively.


  • Open Access

    Integrated Lithium-Rich yLi2MnO3∙(1-y)LiNi1/3Co1/3Mn1/3O2 Layered Cathode Nanomaterials for Lithium-Ion Batteries

    by Ashraf E. Abdel-Ghany, Rasha S. El-Tawil, Ahmed M. Hashem, Alain Mauger, Christian M. Julien

    Integrated Li- and Mn-rich layered cathodes yLi2MnO3∙(1-y)LiMO2 (M = Mn, Co, and Ni) have shown their ability to deliver specific capacities close to 300 mAh g−1, but their significant drawbacks are capacity fading and voltage decay during cycling. In this study, new stoichiometric high-voltage Li-rich oxides with y = 0.0, 0.3, and 0.5 are synthesized in identical conditions using a sol–gel method. These compositions were analyzed to determine their optimal configuration and to understand their extraordinary behavior. Their nanostructural properties were investigated using XRD and Raman spectroscopy, while the morphology and grain-size distribution of the samples were characterized by BET, SEM and HRTEM analyses. The electrochemical performances of the integrated Li- and Mn-rich compounds were evaluated through galvanostatic cycling and electrochemical impedance spectroscopy. The best cathode material 0.5Li2MnO3∙0.5LiNi1/3Co1/3Mn1/3O2 had a capacity retention of 83.6% after 100 cycles in the potential range 2.0–4.8 V vs. Li+/Li.


  • Open Access

    Properties of Co-free Ni-Rich LiNi0.8Mn0.1Fe0.1O2 as Cathode Material for Lithium-Ion Batteries

    by Ahmed Mohamed Ahmed Hashem, Rasha Samir El-Tawil, Somia Mohamed Abbas, Ashraf El-Sayed Abdel-Ghany, Luca Bargnesi, Catia Arbizzani, Alain Mauger, Christian M. Julien

    This study throws more light on the new Co-free and Ni-rich LiNi0.8Mn0.1Fe0.1O2 cathode material for lithium-ion batteries. This cobalt-free cathode material is prepared using a two-step process: the formation of an oxalate precursor by co-precipitation followed by a solid-state reaction with lithium hydroxide and iron citrate. The physico-chemical properties of LiNi0.8Mn0.1Fe0.1O2 are characterized using X-ray diffraction, Raman spectroscopy, scanning electron microscopy, thermal gravimetric analysis, and energy dispersive X-ray spectroscopy, respectively. The LiNi0.8Mn0.1Fe0.1O2 electrode tested at at C/2 rate within voltage window of 3.0-4.4 V vs. Li+/Li delivers a specific capacity of ~80 mAh g-1 and retain about 45% of its initial capacity after 100 cycles.

  • Open Access

    Silver Nanocoating of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium-Ion Batteries

    by Xintong Li, Kai Chang, Somia M. Abbas, Rasha S. El-Tawil, Ashraf E. Abdel-Ghany, Ahmed M. Hashem, Hua Wang, Amanda L. Coughlin, Shixiong Zhang, Alain Mauger, et al.

    Surface coating has become an effective approach to improve the electrochemical performance of Ni-rich cathode materials. In this study, we investigated the nature of an Ag coating layer and its effect on electrochemical properties of the LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode material, which was synthesized using 3 mol.% of silver nanoparticles by a facile, cost-effective, scalable and convenient method. We conducted structural analyses using X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy, which revealed that the Ag nanoparticle coating did not affect the layered structure of NCM811. The Ag-coated sample had less cation mixing compared to the pristine NMC811, which could be attributed to the surface protection of Ag coating from air contamination. The Ag-coated NCM811 exhibited better kinetics than the pristine one, which is attributed to the higher electronic conductivity and better layered structure provided by the Ag nanoparticle coating. The Ag-coated NCM811 delivered a discharge capacity of 185 mAh·g−1 at the first cycle and 120 mAh·g−1 at the 100th cycle, respectively, which is better than the pristine NMC811.


  • Open Access

    Effect of Cationic (Na+) and Anionic (F−) Co-Doping on the Structural and Electrochemical Properties of LiNi1/3Mn1/3Co1/3O2 Cathode Material for Lithium-Ion Batteries

    by Hua Wang, Ahmed M. Hashem, Ashraf E. Abdel-Ghany, Somia M. Abbas, Rasha S. El-Tawil, Tianyi Li, Xintong Li, Hazim El-Mounayri, Andres Tovar, Likun Zhu, et al.

    Elemental doping for substituting lithium or oxygen sites has become a simple and effective technique to improve the electrochemical performance of layered cathode materials. Compared with single-element doping, this work presents an unprecedented contribution to the study of the effect of Na+/F− co-doping on the structure and electrochemical performance of LiNi1/3Mn1/3Co1/3O2. The co-doped Li1-zNazNi1/3Mn1/3Co1/3O2-zFz (z = 0.025) and pristine LiNi1/3Co1/3Mn1/3O2 materials were synthesized via the sol–gel method using EDTA as a chelating agent. Structural analyses, carried out by X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy, revealed that the Na+ and F− dopants were successfully incorporated into the Li and O sites, respectively. The co-doping resulted in larger Li-slab spacing, a lower degree of cation mixing, and the stabilization of the surface structure, which substantially enhanced the cycling stability and rate capability of the cathode material. The Na/F co-doped LiNi1/3Mn1/3Co1/3O2 electrode delivered an initial specific capacity of 142 mAh g−1 at a 1C rate (178 mAh g−1 at 0.1C), and it maintained 50% of its initial capacity after 1000 charge–discharge cycles at a 1C rate.


  • Open Access

    Effect of Na Doping on the Electrochemical Performance of Li1.2Ni0.13Co0.13Mn0.54O2 Cathode for Lithium-Ion Batteries

    by Ahmed M. Hashem, Ashraf E. Abdel-Ghany, Rasha S. El-Tawil, Alain Mauger, Christian M. Julien

    This study aims to investigate the effect of Na doping on the structure, electrical, and electrochemical properties of lithium-rich cathode material. Pristine Li1.2Ni0.13Mn0.54Co0.13O2 (LNMC) and Na-doped Li1.17Na0.03Ni0.13Mn0.54Co0.13O2 (Na-LNMC) layered lithium-rich/manganese-rich compounds are prepared by the sol-gel method. The structural and morphological characterization reveals that the Na doping leads to an ordered structure with regular cubic morphology and enlarged Li layer spacing. This enlargement facilitates the diffusion of lithium ion inside the bulk lattice. Electrochemical impedance spectroscopy (EIS) shows that doping by a small amount of Na (3 mol%) decreases the impedance by more than three orders of magnitude and enhances the diffusion of lithium ions in the same proportion. This remarkable improvement in the conductivity and diffusion coefficient of lithium ions of Na-LNMC improves its capacity retention. In addition, this structure and mode of preparation results in “U-shaped” capacity vs. cycle curves, similar to the curves observed for transition metal oxide electrodes, resulting in an exceptional cycle life, tested for up to 400 cycles at 2C.


  • Open Access

    Nanostructured Molybdenum-Oxide Anodes for Lithium-Ion Batteries: An Outstanding Increase in Capacity

    by Hua Wang, Tianyi Li, Ahmed M. Hashem, Ashraf E. Abdel-Ghany, Rasha S. El-Tawil, Hanaa M. Abuzeid, Amanda Coughlin, Kai Chang, Shixiong Zhang, Hazim El-Mounayri, et al.

    This work aimed at synthesizing MoO3 and MoO2 by a facile and cost-effective method using extract of orange peel as a biological chelating and reducing agent for ammonium molybdate. Calcination of the precursor in air at 450 °C yielded the stochiometric MoO3 phase, while calcination in vacuum produced the reduced form MoO2 as evidenced by X-ray powder diffraction, Raman scattering spectroscopy, and X-ray photoelectron spectroscopy results. Scanning and transmission electron microscopy images showed different morphologies and sizes of MoOx particles. MoO3 formed platelet particles that were larger than those observed for MoO2. MoO3 showed stable thermal behavior until approximately 800 °C, whereas MoO2 showed weight gain at approximately 400 °C due to the fact of re-oxidation and oxygen uptake and, hence, conversion to stoichiometric MoO3. Electrochemically, traditional performance was observed for MoO3, which exhibited a high initial capacity with steady and continuous capacity fading upon cycling. On the contrary, MoO2 showed completely different electrochemical behavior with less initial capacity but an outstanding increase in capacity upon cycling, which reached 1600 mAh g−1 after 800 cycles. This outstanding electrochemical performance of MoO2 may be attributed to its higher surface area and better electrical conductivity as observed in surface area and impedance investigations.