HRHamid Roshan

Hamid Roshan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hamid Roshan has a total of 66 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Senior Lecturer, School of Engineering and Technology, Central Queensland University, Melbourne, 3000, VIC, AustraliaResearch Officer, School of Minerals and Energy Resources Engineering, The University of New South Wales, Kensington, 2032, NSW, Australia

    by Mohammad Vahab, Babak Shahbodagh, H. Roshan

    Physics-informed neural networks (PINNs) have emerged as a promising framework for solving partial differential equations; however, their performance deteriorates in the presence of discontinuities and singularities. Existing approaches, such as domain decomposition-based PINNs, partially address these challenges but introduce significant computational complexity and difficulties in handling evolving interfaces. This paper introduces enriched physics-informed neural networks (EPINNs), a novel framework that incorporates enrichment strategies inspired by the extended finite element method into the PINN architecture. The proposed approach represents the solution as a combination of standard and enriched components using overlapping, non-local neural networks, enabling the natural representation of discontinuous and singular fields without domain decomposition. The capabilities of EPINNs are demonstrated through fracture mechanics problems, where asymptotic crack-tip enrichment functions are embedded into the solution space to accurately capture stress singularities. The numerical results show improved accuracy and computational efficiency compared to existing PINN-based approaches. Although the present study focuses on crack-induced discontinuities, the proposed framework is general and can be extended to a broad class of problems involving weak and strong discontinuities.

  • Open Access

    A Comprehensive Thermodynamic Assessment of an Integrated CSP-Brayton and Geothermal Battery System

    by Putra Agson-Gani, H. Roshan, Klaus Regenauer-Lieb, Robert Taylor, Sheikh Shahidur Rahman

    Existing CSP--geothermal hybrid systems treat the subsurface reservoir as a fixed-temperature heat source. How waste heat from a solar-driven power cycle can progressively upgrade reservoir temperature, and how such a system should be operated transiently under realistic solar forcing, has not been examined. A supercritical CO₂ regenerative Brayton topping cycle is coupled with a double-flash geothermal bottoming cycle through a novel underground thermal energy storage mechanism, termed the geothermal battery, in which waste heat rejected from the Brayton cooler is continuously injected into the subsurface to upgrade the reservoir at the near-field extraction well. A four-mode thermal arbitrage dispatch framework governs hourly heat allocation between surface thermal energy storage and the subsurface reservoir. The integrated system is assessed over a 25-year transient simulation driven by real direct normal irradiance data at the Ulumbu geothermal field, East Nusa Tenggara, Indonesia. Bayesian optimisation over a ten-dimensional design space, subject to a high-side pressure constraint of 30 MPa, reveals an intrinsic conflict between maximising net electrical output and maximising reservoir charging temperature. The Pareto knee-point balances these objectives at a 25-year cumulative net electrical output of 8,737 GWhe and a cumulative geothermal heat gain of 22,652 GWhth, corresponding to a quasi-steady system net power of 47.9 MWe. Thermal breakthrough at the production well occurs within approximately 0.7 years, after which the produced temperature stabilises over 300°C. The geothermal battery delivers a sustained gain of +34 MWth in geothermal heat input, +8 MWe in bottoming-cycle net power, and approximately 2 percentage points in overall system efficiency relative to operation without subsurface heat accumulation. These gains plateau by year 1.5--2.0 and are maintained indefinitely, establishing the geothermal battery as a one-time thermal investment with a continuous return.

  • Open Access

    Mechanistic Insights into Damage-Driven Creep in Organic-Rich Shales

    by Umar Farooq, Mohammed Abdul Qadeer Siddiqui, Klaus Regenauer-Lieb, Hamid Roshan

    The creep response of organic rich shales to mechanical loading is often linked to viscous behaviour of organic matters and clay minerals at macro (core) scale without a full understanding of microscale mechanisms driving such macro-scale time-dependent observations. This in turn leads to models developed solely based on viscous behaviour of the materials and no other potential involved physical processes. To understand the microscale mechanisms driving macroscale time-dependent behaviour of organic-rich shales, we conduct a series of multiscale creep-damage experiments. These experiments include macroscale tests on shale samples from Beetaloo Basin, Northen Territory, Australia and microscale tests on shale and synthetic samples (hydrostone, hydrostonecement mixture, and Plaster of Paris (PoP) with rubber material embedded in their skeleton structure) using an optical micro-shear cell device. The result of macroscale experiments interestingly indicates that creep does not occur without damage to skeleton of the specimen. The digital image correlation analysis from microscale experiments further reveal the complex evolution of coupled damage and creep in the specimens. The findings from the microscale test also demonstrate that the characteristics of creep mechanisms are specific to the mechanical properties of materials, again highlighting the necessity of damage for creep occurrence. The understanding from microscale tests is further used to develop a multiscale creep constitutive model based on coupled continuum mechanics and non-equilibrium thermodynamics specifically focussing on energy dissipation encountered during damage driven creep process. The developed model is upscaled to the macroscale using energy conservation, revealing a consistent trend between the scales tested. This observation underscores the scalability and reliability of the developed model, shedding light on the fundamental mechanisms governing creep behaviour in brittle materials having soft constitutes across different scales.


  • Open Access

    Determination of 3D Stress State Using a Novel Integrated Diametrical Core Deformation and Ultrasonic Analysis

    by Atefeh Dargahizarandi, Hossein Masoumi, Abolfazl Hashemi, Biswachetan Saha, Hamid Roshan

    Sustainable underground mining operation at deep levels requires a clear understanding of in situ stress conditions to ensure safety of personnel and equipment for continuous exaction of natural resources. Obtaining representative three-dimensional (3D) stress data at depth remains a significant challenge due to the operational complexities, high costs and time demands. Despite various methods proposed, core-based in situ stress estimation stands out as a cost-effective and reliable approach. Yet, these techniques come with inherent complexities within the laboratory environment, introducing considerable uncertainties and subjectivity in reliable stress estimation. The diametrical core deformation analysis (DCDA) was introduced to address these challenges, providing improved measurement repeatability and mitigating uncertainties. However, DCDA is limited to two-dimensional (2D) stress state estimation, leaving the determination of the full 3D stress tensor as an unresolved challenge. Therefore, this study presents a novel integrated methodology that combines DCDA with ultrasonic mapping to determine the full 3D stress state from core samples including the azimuth and dip angle of stress components. Both techniques leverage the expansion of core samples under various directions following the release from in situ stress, with greater expansion expected along the axis with the highest principal stress. Stress magnitudes were then calculated using a new analytical technique and the robustness and reliability of the proposed methodology were validated through analysing eight core samples from two vertical boreholes in an Australian underground metalliferous mine. The results were compared with the on-site overcoring stress measurements, having core-based measurements providing reliable predictions of the three principal stresses’ magnitude, azimuth, and dip angle. The current study contributes to sustainable mining by providing a more accurate and less invasive technique for 3D in situ stress estimation. Such an advancement helps to reduce uncertainties in geotechnical assessments, enabling efficient and sustainable mine planning and operation.


  • Open Access

    A Theoretical and Experimental Study on Asperity Damage-Driven Strain Rate Dependency of Fractured Coal

    by Linan Su, Hamid Roshan

    Asperities within pre-existing fractures of coals can experience local damage during the fracture closure due to external loading. Previous research postulates that this local asperity damage can lead to strain rate-dependency without causing permanent deformation to the bulk of the coal specimens. This study aims to comprehensively investigate this behavior by developing a theoretical model that characterizes the strain rate-dependency driven by fracture asperity damage in coal. To achieve this objective, an initial series of micro-scale mechanical tests are conducted on joint specimens to establish a model for effective stress acting on asperities. Building upon this model, a theoretical foundation is further developed to describe the strain rate-dependent asperity damage evolution and resulting energy dissipation. These frameworks are subsequently incorporated into elasticity and damage mechanics to capture the strain rate-dependent stress–strain relationships. To validate the proposed model across multiple scales, additional triaxial tests on core-scale specimen and micro-scale mechanical tests on joint specimens are performed. The experimentally measured strain rate-dependency aligns well with the predictions of the proposed model, indicating a successful development of a robust model. The results of the model developed in this study reveal that the strain rate-dependency in fractured coals is governed by several factors, including asperity damage, mechanical properties of the coal specimens and effective stress acting on asperities of pre-existing fractures within the bulk of coal. Moreover, it is shown that the effective stress acting on asperities is significantly affected by both applied normal stress and joint roughness coefficient (JRC). The insights derived from this study demonstrate that the strain rate-dependency induced by micro-scale asperity damage of pre-existing fractures leads to observable strain rate-dependency in bulk specimens at core-scale and the proposed model can adequately capture this behavior.


  • Thermo-Hydro-Chemo-Mechanical (THCM) Continuum Modeling of Subsurface Rocks: A Focus on Thermodynamics-Based Constitutive Models

    by Mohammed Abdul Qadeer Siddiqui, Klaus Regenauer-Lieb, Hamid Roshan

    Accurate multiphysics modeling is necessary to simulate and predict the long-term behavior of subsurface porous rocks. Despite decades of modeling subsurface multiphysics processes in porous rocks, there are still considerable uncertainties and challenges remaining partly because of the way the constitutive equations describing such processes are derived (thermodynamically or phenomenologically) and treated (continuum or discrete) regardless of the way they are solved (e.g., finite element or finite volume methods). We review here continuum multiphysics models covering aspects of poromechanics, chemo-poromechanics, thermo-poromechanics, and thermo-chemo-poromechanics. We focus on models that are derived based on thermodynamics to signify the importance of such a basis and discuss the limitations of the phenomenological models and how thermodynamics-based modeling can overcome such limitations. The review highlights that the experimental determination of thermodynamics response coefficients (coupling or constitutive coefficients) and field applicability of the developed thermodynamics models are significant research gaps to be addressed. Verification and validation of the constitutive models, preferably through physical experiments, is yet to be comprehensively realized which is further discussed in this review. The review also shows the versatility of the multiphysics models to address issues from shale gas production to CO2 sequestration and energy storage and highlights the need for inclusion of thermodynamically consistent damage mechanics, coupling of chemical and mechanical damage, and two-phase fluid flow in multiphysics models.


  • A Methodological Determination of Sorptive Poromechanical Constitutive Coefficients for Double Porosity Shales

    by Muath Algazlan, Mohammed Abdul Qadeer Siddiqui, Klaus Regenauer-Lieb, Hamid Roshan


  • Coupled Modeling

    by Mohammad Ali Aghighi, Hamid Roshan

  • Open Access

    Effect of Pore Pressure on Strain Rate-Dependency of Coal

    by Linan Su, Mohammed Abdul Qadeer Siddiqui, Hamid Roshan

    Viscoelastic strain rate-dependent behaviour of coal is critical in several subsurface engineering applications especially coal seams gas production. Such rate dependency is controlled by the interaction between coal bulk and gas sorption (a sorbing gas) or gas pressure (a non-sorbing gas). Despite the research conducted to date, the gas pressure effect (non-sorbing) on the viscous behaviour of sediments in particular coal remains unexplored. We, therefore, investigate the strain rate-dependent mechanical behaviour of coal under isotropic loading to specifically explore the effect of gas pressure (Helium) on its rate dependency eliminating the sorption effect. We perform a set of triaxial experiments on coal specimens at dry and pressurised gas (Helium) conditions under different strain rates under isotropic loading. The experimental results show that all coal specimens have viscoelastic strain rate dependency at a dry condition where viscous effect increases with strain rate. As a result, the bulk modulus of the specimens increases with the increase in strain rates. This strain rate dependency response, however, reduces with an increase in pore pressure and vanishes at a certain pore pressure under the same effective stress to that of dry specimens. We further employ X-ray micro-Computed Tomography (XRCT) to 3D scan a coal specimen saturated with Krypton gas undergoing different loading rates to shed light on the micro-mechanisms of gas pressure effect on specimens’ rate dependency. The XRCT results show that gas can be trapped in small-scale fractures and pores during the loading process leading to a localised undrained response that can stiffen the specimen and reduce its ability to show viscous rate dependency. The obtained results are significant in optimizing coal seam gas production and coal seam gas drainage applications.