ADAmit Kumar Dutta

Amit Kumar Dutta

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Amit Kumar Dutta has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    MLDCSS: Energy-Aware Multi-Level Cooperative Spectrum Sensing With Hierarchical Fusion and Non-Coherent MIMO in CR-IoT Networks

    by Kaushik Das, Chetna Singhal, Amit Kumar Dutta, Raja Datta

    This research article presents a unique multi-evel decision cooperative spectrum sensing (MLDCSS) framework for multiple-input-multiple-output (MIMO)-enabled cognitive radio internet of things (CR-IoT) networks. The architecture uses a modified k-means algorithm to account for residual energy and spatial proximity, resulting in up to 35% longer cluster-head lifetimes. Secondary users (SUs) use non-coherent square law selection (SLS) with multiple antennas for pilot-free sensing. Cluster heads (CHs) use equal gain combining (EGC) to fuse intra-cluster observations, reducing per-node computational load by approximately 40% compared to maximal ratio combining (MRC). The fusion center (FC) uses a hierarchical two-stage fusion approach to make final spectrum occupancy judgments, resulting in a 20% increase in detection probability at 0.1 false alarm rate. Analytical performance constraints for Nakagami-m fading are derived and validated using large Monte Carlo simulations, revealing close agreement within 2 dB over a wide signal-to-noise ratio (SNR) range. Complexity study demonstrates overall linear scaling with the number of SUs, delivering a 50% reduction in signaling overhead and 15% higher area-under-curve (AUC) in Pd-Pf tradeoffs compared to centralized and flat OR fusion baselines. These findings show that MLDCSS is a scalable, energy-efficient, and useful solution for distributed spectrum sensing in next-generation CR-IoT networks.

  • Open Access

    Relative Entropy-Based Training of Quantum Neural Networks

    by Subhadeep Mondal, Amit Kumar Dutta

    Quantum neural networks (QNNs) are gaining attention as versatile models for quantum machine learning, but training them effectively remains a challenge. Most existing approaches, such as quantum multi-layer perceptrons (MLPs), use fidelity-based cost functions. While well-suited for pure states, these measures are less reliable when inputs and outputs are mixed states—a situation common in learning quantum channels. In this work, we introduce a training framework built on a relative entropyinspired cost function. By quantifying the directional divergence between learned and target states, relative entropy provides a more informative and principled measure than linear fidelity, naturally capturing both spectral and eigenvector differences in mixed states. This approach preserves the completely positive (CP) structure of the network, supports efficient back-propagation in layered QNN configurations, and achieves improved accuracy and convergence over fidelity-based training. These results highlight entropy-based optimization as a promising path toward scalable, robust, and noise-resilient quantum learning.

  • QRadCom: Quantum-Assisted Source and Symbol Detection Framework in a Radar Communication System With Low-Computational Complexity

    by Soumita Naskar, Mostafizur Rahaman Laskar, Amit Kumar Dutta

    Radar communication system (RadCom) is an emerging area in vehicular technology that provides efficient bandwidth allocation for joint detection of communication symbols and source detection in radar. This finds application in vehicle-to-anything (V2X) system. Towards next-generation communication, such intelligent system requires both accuracy and complexity efficient algorithms for reliable use cases. Classical super-resolution algorithms that provide the high accuracy in parameter estimation are built on matrix sub-space method incurring high computational complexity. By achieving a performance nearly as accurate as that of the classical RadCom algorithm for target detection in radar and mean square error (MSE) performances in communication system, we introduce a quantum-assisted signal processing for radar communication, known as QRadCom. The key contribution in this work is the significant computational complexity reduction with the proposed quantum formalism-based QRadCom, compared to its classical counterpart. Considering a multi-tap communication channel, we demonstrate a quantum-assisted symbol detection and source identification algorithm for a single-input and multiple-output (SIMO) antenna configuration. Further, using random matrix theory for the large-dimensional channel matrix, we derive an approximate bound for the mean square error in the QRadCom system. Numerical results manifest the efficacy of the proposed QRadCom in terms of computational complexity improvement and nearly same performance compared to the classical algorithm.


  • MIMO QRadRCom: A New Topology for Quantum-Assisted Radar and Relay-Based MIMO System

    by Soumita Naskar, Mostafizur Rahaman Laskar, Amit K. Dutta

    The proposal outlines the design of a radar and relay-assisted communication system with multiple input multiple output (MIMO) configuration, utilizing quantum algorithm in coexistence scenario.We name it MIMO QRadRCom framework. Quantum computation offers significant speed-ups and holds promise for future technologies like sixth generation (6G) cellular networks. By integrating quantum simulation, we aim to design parameters, like an equalizer at the communication receiver and others, and then classically optimize the rest of the design parameters. The equalizer comes from the linear minimum mean square error (LMMSE) criterion, which involves matrix inversion and is classically expensive. The mathematical formulations address classical and quantum inaccuracies, supported by numerical simulations on the IBM quantum machine.

  • Open Access

    Wideband MIMO THz System Design With MB-OFDM Waveform and Hybrid Beamforming

    by T. D. Dheerajlal, Amit Kumar Dutta

    Terahertz (THz) band communication, operating in the range of (0.1-10)×1012 Hz, holds immense potential for fulfilling the ever-increasing demand for ultra-high data rate wireless communication. However, the unfavorable channel characteristics of THz communication pose a significant challenge in realizing this promising technology. In this paper, we present a novel solution to this challenge by proposing a wideband THz hybrid multiple-input multiple-output (MIMO) system design that leverages the ultra-wide bandwidth and the high spectral efficiency of MIMO schemes. We address the frequency-dependent nature of the THz channel by using a filter-bank-based channel model and a multi-bank orthogonal frequency division multiplexing (MB-OFDM) waveform design, which slices the wideband channel into smaller frequency-independent subbands. Specifically, we illustrate two different THz hybrid MIMO structures, one with a single precoder and combiner in the high sampling domain and another with a band-wise precoder design in the low sampling domain. We have adopted sub-optimal methods that alternatively optimize the beamformers. We evaluate the performance of our proposed MIMO schemes using numerical simulations that validate their feasibility and effectiveness in achieving communication in ultra-wideband frequency-dependent THz channels under various parameters and subband width assumptions. The results also indicate that the proposed MB-OFDM waveform design reduces the peak-to-average power ratio (PAPR) of the spatial streams compared to conventional OFDM.


  • Open Access

    RadRCom: A Relay-Assisted Radar Communication System Design Framework

    by Soumita Naskar, Amit Kumar Dutta

    This study introduces the novel communication topology, namely RadRCom, integrating radar and relay-assisted communication systems for single antenna configuration as a proof of concept. While simultaneous radar and communication operations within the same spectrum gain momentum, our work advances this concept by incorporating relay assistance, particularly crucial in applications like vehicle-to-anything (V2X) communication. The inclusion of relays significantly enhances communication system performance, addressing challenges such as interference management between radar, relay, and communication nodes. This topology attracts three design challenges such as optimal radar waveform, relay parameters and communication system parameters. However, the key bottlenecks are the interference from radar to the relay and communication receiver and similarly the one from communication transmitter and relay node to the radar. Therefore, the work addresses these challenges simultaneously meeting the quality of service. Our proposed RadRCom system optimizes radar waveform and relay parameters to improve signal-to-interference noise ratio (SINR) at the radar and mean square error (MSE) of data transmission. We introduce two frameworks for parameter design, i.e, radar-centric and relay-centric ones. We take a sub-optimal iterative approach to address the computational complexity. Numerical simulations are performed to evaluate the performances of the proposed RadRCom system with the proposed algorithms.


  • Open Access

    A complexity efficient penta-diagonal quantum smoothing filter for bio-medical signal denoising: a study on ECG

    by Mostafizur Rahaman Laskar, Sawon Pratiher, Amit Kumar Dutta, Nirmalya Ghosh, Amit Patra

    Extracting information-bearing signal from a noisy environment has been a practical challenge in both classical and quantum computing formalism, especially in critical signal processing applications. To filter out the effect of noise, we propose a quantum smoothing filter built upon quantum formalism-based circuits applied for electrocardiogram signal denoising. The proposed quantum filter is a conceptually novel framework with an advantage in computational complexity as compared to the existing classical filters, such as discrete wavelet transform and empirical mode decomposition, whereas it achieves similar performance metrics for the accuracy of the filter. Further, we exploit the penta-diagonal Toeplitz structure of the smoothing filter, which gives approximately $$48\%$$ 48 % gate cost reduction for 10 qubit circuit compared to the standard Hamiltonian simulation without structure. The run-time complexity using the quantum matrix inversion technique for the structured matrix is given by $$\tilde{{\mathscr {O}}}\left( \frac{\kappa ^2 \text {poly}(\log {N})}{\varepsilon _P}\right)$$ O ~ κ 2 poly ( log N ) ε P for condition number $$\kappa$$ κ of the $$N\times N$$ N × N filter matrix within precision $$\varepsilon _P$$ ε P . Embedding fixed sparsity of the banded matrix, the quantum filter shows potentially better run-time complexity than classical filtering techniques. For the quantifiable research results of our work, we have shown several performance metrics, such as mean-square error and peak signal-to-noise ratio analysis, with a bound of error due to observation noise, simulation error and quantum measurement uncertainty.


  • Open Access

    An MB-OFDM Based Wideband THz Communication System With Impairment Aware Precoder and Squint Effect Mitigation

    by T.D Dheerajlal, Ankam Madhusree, Amit Kumar Dutta

    Terahertz (THz) communication is a highly promising solution for addressing the ultra-high data rate requirements of future sixth-generation (6G) wireless systems. However, the unfavorable frequency-dependent channel characteristics of THz communication pose a significant challenge in realizing this promising technology. In this paper, we present a novel solution to this challenge by proposing a wideband THz system featuring a unique THz-specific digital baseband waveform design tailored to the distinctive channel characteristics of the THz spectrum. To address the frequency-dependent challenges posed by the wideband THz channel and the spectral efficiency loss inherent in conventional orthogonal frequency division multiplexing (OFDM) systems due to cyclic prefix overhead, we propose a THz system with beamforming incorporating a multi-band OFDM (MB-OFDM) based waveform design using a filter-bank based channel model that slices the wideband channel into smaller frequency-independent subbands for ultra-wideband THz communication. Furthermore, this work introduces a novel squint model taking into account the printed-circuit-board (PCB) impairments and circuit imperfections, which have not been considered before. We also propose an all-digital mitigation scheme with this model. We propose a channel estimation algorithm using a three-level adaptive method with an auto-regressive (AR) model for exploiting the frequency dependency among the intra and inter-narrow subbands. Apart from these key contributions, we propose a THz environment-aware precoder to mitigate the wideband effect in the THz channel, specifically the subband-specific path loss and environment-related effect, and balance the overall gains across the band. We have also proposed to optimize the number of subbands and zero-padding in MB-OFDM waveform based on the minimum bit error rate (MBER) criterion. Numerical simulations are carried out to evaluate the performance of the proposed schemes demonstrating their feasibility and effectiveness for wideband THz communication with results showing a lower peak-to-average power ratio (PAPR) for the proposed waveform as compared to conventional OFDM.


  • Open Access

    A Proposed Quantum Framework for Low-Complexity Quantum Simulation and Spectrum Estimation of Hankel-Patterned Systems

    by Mostafizur Rahaman Laskar, Amit Kumar Dutta

    The structured matrix completion problem (SMCP) is ubiquitous in several signal processing applications. In this work, we consider a fixed pattern, namely Hankel-structure for the SMCP under quantum formalism. By exploiting its structure, a lower-gate-complexity quantum circuit realisation of a Hankel system is demonstrated. Further, we propose a quantum simulation algorithm for the Hankel-structured Hamiltonian with an advantage in quantum gate-operation complexity in comparison with the standard quantum Hamiltonian simulation technique. We show its application in eigenvalue spectrum estimation for signal processing applications. An error bound associated with this proposed quantum evolution is proposed with the consideration of spectrum estimation, and measurement uncertainty. Numerical results are reported adopting random matrix theory in its fold to evaluate the efficacy of the proposed architecture and algorithm for large dimensional systems including an example application in delay estimation for ranging operation in a wireless communication system.


  • Open Access

    A modified least squares-based tomography with density matrix perturbation and linear entropy consideration along with performance analysis

    by Subhadeep Mondal, Amit Kumar Dutta

    Quantum state tomography identifies target quantum states by performing repetitive measurements on identical copies. In this paper, we have two key contributions aimed at improving traditional post-processing computational complexity and sample complexity of quantum tomography protocols. In the first case, we propose a new low-cost positivity constraint method based on density matrix perturbation after the least squares (LS) estimation of the density matrix. In the second case, we propose a new cost function with the maximum linear entropy and LS method to improve the sample average trace distance with reasonably low sample complexity. We call it the LS with the maximum entropy (LSME) method. Our proposed algorithm does not follow the iterative optimization technique, which is true for existing maximum likelihood and entropy-based ones. Performance analysis is conducted for our proposed methods by studying how they compare to the existing techniques for different sample complexities and dimensionalities. Extensive numerical simulations have been conducted to demonstrate the advantages of the proposed tomography algorithms.