Jian Wu
Research Subjects
Jian Wu has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Lehu Wen
Brunel University London
6 shared publications - Xiaofei Ren
China Research Institute of Radiowave Propagation, Xinxiang, Henan 453003, China
6 shared publications - Qi Luo
University of Hertfordshire
5 shared publications - Qingling Yang
School of Engineering and Digital Arts, University of Kent, Canterbury CT2 7NZ, UK
5 shared publications - Steven Gao
The Chinese University of Hong Kong
5 shared publications - Xue-Xia Yang
Shanghai University
5 shared publications
Latest Publications
- Open Access
- 7 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 69 (5) , 2637-2647
A Dual-Polarized Planar Antenna Array Differentially-Fed by Orthomode Transducer
This paper presents a new design of a differentially-fed substrate integrated planar antenna array with dual-polarization. Compared with the traditional dual-polarized antenna arrays, the proposed array antenna has the advantages of simple configuration, high cross-polarization discrimination (XPD) and high gain. 2×2-element subarray design with a via-loaded crossover structure is used, which reduces the complexity of the array antenna. The operation bandwidth is improved by generating three resonances in the subarray. An 8×8 antenna array is designed, prototyped and tested to exemplify its potential applications in large dual-polarized antenna arrays. A planar orthomode transducer is used to achieve differential excitation for the antenna array. The measured results show that the proposed antenna array has an impedance bandwidth of 19.2–20.7 GHz for |S11|<-10 dB and port isolation higher than 20 dB. The array antenna exhibits a high XPD of 43 dB and a flat gain about 22.2 dBi within the bandwidth.
- 7 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 69 (5) , 2637-2647
Open AccessA Dual-Polarized Planar Antenna Array Differentially-Fed by Orthomode Transducer
This paper presents a new design of a differentially-fed substrate integrated planar antenna array with dual-polarization. Compared with the traditional dual-polarized antenna arrays, the proposed array antenna has the advantages of simple configuration, high cross-polarization discrimination (XPD) and high gain. 2×2-element subarray design with a via-loaded crossover structure is used, which reduces the complexity of the array antenna. The operation bandwidth is improved by generating three resonances in the subarray. An 8×8 antenna array is designed, prototyped and tested to exemplify its potential applications in large dual-polarized antenna arrays. A planar orthomode transducer is used to achieve differential excitation for the antenna array. The measured results show that the proposed antenna array has an impedance bandwidth of 19.2–20.7 GHz for |S11|<-10 dB and port isolation higher than 20 dB. The array antenna exhibits a high XPD of 43 dB and a flat gain about 22.2 dBi within the bandwidth.
- 20 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
A Wideband Dual-Band Dual-Polarized Antenna for 5G Base Station Applications
A wideband dual-band dual-polarized antenna is presented in this paper for 5G base station applications. Two squared loop patches are utilized for lower band and upper band radiations, and also the size reduction. To excited the square loop patches, a linear and H-shaped slots are used to couple the energy to the top radiating patches. Due to the requirements of dual-band operation and very low reflection coefficients, balanced open-circuited stubs and high impedance line are elaborately introduced to match the dual-band operation. The proposed antenna was designed, fabricated, and measured for verification. The measured results show that the proposed antenna can work at 3.3-3.64 GHz and 4.8-5.02 GHz with the overlapped reflection coefficients lower than -15 dB and isolation higher than 33.3 dB. In addition, unidirectional radiation patterns are achieved at both lower and upper bands for 5G base station applications.
- 20 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
A Wideband Dual-Band Dual-Polarized Antenna for 5G Base Station Applications
A wideband dual-band dual-polarized antenna is presented in this paper for 5G base station applications. Two squared loop patches are utilized for lower band and upper band radiations, and also the size reduction. To excited the square loop patches, a linear and H-shaped slots are used to couple the energy to the top radiating patches. Due to the requirements of dual-band operation and very low reflection coefficients, balanced open-circuited stubs and high impedance line are elaborately introduced to match the dual-band operation. The proposed antenna was designed, fabricated, and measured for verification. The measured results show that the proposed antenna can work at 3.3-3.64 GHz and 4.8-5.02 GHz with the overlapped reflection coefficients lower than -15 dB and isolation higher than 33.3 dB. In addition, unidirectional radiation patterns are achieved at both lower and upper bands for 5G base station applications.
- Open Access
- 24 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 69 (3) , 1404-1413
Cavity-Backed Slot-Coupled Patch Antenna Array With Dual Slant Polarization for Millimeter-Wave Base Station Applications
This paper presents a novel dual slant polarized antenna for millimeter-wave (mmWave) base stations. Compared with the traditional slant polarized mmWave antennas, the proposed antenna offers the advantages of high cross-polarization discrimination (XPD), good aperture efficiency, simple structure, and low profile. The corner-fed substrate integrated waveguide (SIW) cavity is adopted to improve the port isolation and XPD of this slot-coupled antenna. Four corner-truncated patches connected by a thin cross strip are placed over the SIW cavity to increase the operation bandwidth. Then, a 2 × 8 antenna array is designed to exemplify the antenna element performance. To improve impedance matching, a shorted patch is introduced in designing the series feeding network and the power divider. The experimental results show that the 2-dB-down gain bandwidth of the proposed antenna array reaches 6.0% and the port isolation is better than 20 dB. The gain and XPD of the antenna array measure 16.7 dBi and 25 dB at the center frequency, respectively.
- 24 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 69 (3) , 1404-1413
Open AccessCavity-Backed Slot-Coupled Patch Antenna Array With Dual Slant Polarization for Millimeter-Wave Base Station Applications
This paper presents a novel dual slant polarized antenna for millimeter-wave (mmWave) base stations. Compared with the traditional slant polarized mmWave antennas, the proposed antenna offers the advantages of high cross-polarization discrimination (XPD), good aperture efficiency, simple structure, and low profile. The corner-fed substrate integrated waveguide (SIW) cavity is adopted to improve the port isolation and XPD of this slot-coupled antenna. Four corner-truncated patches connected by a thin cross strip are placed over the SIW cavity to increase the operation bandwidth. Then, a 2 × 8 antenna array is designed to exemplify the antenna element performance. To improve impedance matching, a shorted patch is introduced in designing the series feeding network and the power divider. The experimental results show that the 2-dB-down gain bandwidth of the proposed antenna array reaches 6.0% and the port isolation is better than 20 dB. The gain and XPD of the antenna array measure 16.7 dBi and 25 dB at the center frequency, respectively.
- Open Access
- 2 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 68 (10) , 7007-7016
Millimeter-Wave Dual-Polarized Differentially Fed 2-D Multibeam Patch Antenna Array
In this paper, a novel millimetre-wave dual-polarized 2D multibeam antenna array incorporating differentially-fed antenna elements is proposed to achieve high cross-polarization discrimination (XPD) when the beams scan to the maximal pointing angles. The antenna element is composed of a SIW cavity with four shorted patches placed inside, and it is differentially excited for dual-polarization by a pair of feeding strips and transverse slots beneath the patches. Differential excitation is realized by a power divider designed on two laminate layers. Two Butler Matrices placed perpendicularly with each other in different laminates are employed to generate four tilted beams with dual-polarization. A 2×2 dual-polarized 2D multibeam antenna array working at 28 GHz is designed, fabricated, and measured. The operation bandwidth of the antenna is 26.8 GHz – 29.2 GHz. The improvement in the XPD is experimentally demonstrated by far-field measurement. When the beams scan to 30° off the boresight, the measured XPDs are 28 dB at the centre frequency and higher than 25 dB over the operation bandwidth, which confirms that the cross-polarized radiation in the 2D multibeam antenna array is suppressed by using the differential-feeding technique. The measured gain is in the range from 7.6 dBi to 10.5 dBi.
- 2 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 68 (10) , 7007-7016
Open AccessMillimeter-Wave Dual-Polarized Differentially Fed 2-D Multibeam Patch Antenna Array
In this paper, a novel millimetre-wave dual-polarized 2D multibeam antenna array incorporating differentially-fed antenna elements is proposed to achieve high cross-polarization discrimination (XPD) when the beams scan to the maximal pointing angles. The antenna element is composed of a SIW cavity with four shorted patches placed inside, and it is differentially excited for dual-polarization by a pair of feeding strips and transverse slots beneath the patches. Differential excitation is realized by a power divider designed on two laminate layers. Two Butler Matrices placed perpendicularly with each other in different laminates are employed to generate four tilted beams with dual-polarization. A 2×2 dual-polarized 2D multibeam antenna array working at 28 GHz is designed, fabricated, and measured. The operation bandwidth of the antenna is 26.8 GHz – 29.2 GHz. The improvement in the XPD is experimentally demonstrated by far-field measurement. When the beams scan to 30° off the boresight, the measured XPDs are 28 dB at the centre frequency and higher than 25 dB over the operation bandwidth, which confirms that the cross-polarized radiation in the 2D multibeam antenna array is suppressed by using the differential-feeding technique. The measured gain is in the range from 7.6 dBi to 10.5 dBi.
- Open Access
- 10 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 177864-177873
A Low Complexity $16\times16$ Butler Matrix Design Using Eight-Port HybridsBeamforming networks such as Butler Matrices are important for multibeam array antenna applications. The challenge for Butler Matrix design is that their complexity increases with the number of ports. In this paper, a novel approach of designing a 16 × 16 Butler Matrix with significant structure simplification is presented. The eight-port hybrids with no crossovers are used to simplify the network. To ensure the network has the same magnitude and phase responses as the standard one, the location and phase shifting value of each fixed phase shifter are derived from the S-matrix of each hybrid. A 16 × 16 Butler Matrix network operating from 9 GHz-11 GHz is designed to validate this concept. The compensated microstrip 3-dB/90° directional coupler, the phase shifter with a shunt open-and-short stub and the crossover with a resonating patch are used to reduce the transmission loss and enable broadband operation.
- 10 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 177864-177873
Open AccessA Low Complexity $16\times16$ Butler Matrix Design Using Eight-Port HybridsBeamforming networks such as Butler Matrices are important for multibeam array antenna applications. The challenge for Butler Matrix design is that their complexity increases with the number of ports. In this paper, a novel approach of designing a 16 × 16 Butler Matrix with significant structure simplification is presented. The eight-port hybrids with no crossovers are used to simplify the network. To ensure the network has the same magnitude and phase responses as the standard one, the location and phase shifting value of each fixed phase shifter are derived from the S-matrix of each hybrid. A 16 × 16 Butler Matrix network operating from 9 GHz-11 GHz is designed to validate this concept. The compensated microstrip 3-dB/90° directional coupler, the phase shifter with a shunt open-and-short stub and the crossover with a resonating patch are used to reduce the transmission loss and enable broadband operation.
- Open Access
- 28 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 68 (5) , 4120-4125
Dual-Polarized Crossed Slot Array Antenna Designed on a Single Laminate for Millimeter-Wave Applications
A novel dual-polarized crossed slot planar array antenna is presented in this paper. The proposed design integrates the antenna array with the feeding networks on a single laminate. The antenna element is developed by using a TE210 and TE120 mode cavity, which is constructed by inserting a number of metalized posts around the crossed region of two perpendicular substrate integrated waveguides (SIWs). The crossed slot is etched over the cavity and is excited from two orthogonal directions to realize dual-polarization. Owing to the orthogonality between the TE210 and TE120 mode, high isolation and low cross-polarization are achieved. A prototype of the designed antenna array operating at 25 GHz is fabricated and measured. The measured results confirm that the presented array antenna has high port isolation (> 41 dB), high cross-polarization discrimination (XPD) (>26 dB) and high aperture efficiency (40%). With advantages of simple configuration, good radiation performance and easy fabrication, this proposed array antenna is a good candidate for millimeter-wave wireless systems.
- 28 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 68 (5) , 4120-4125
Open AccessDual-Polarized Crossed Slot Array Antenna Designed on a Single Laminate for Millimeter-Wave Applications
A novel dual-polarized crossed slot planar array antenna is presented in this paper. The proposed design integrates the antenna array with the feeding networks on a single laminate. The antenna element is developed by using a TE210 and TE120 mode cavity, which is constructed by inserting a number of metalized posts around the crossed region of two perpendicular substrate integrated waveguides (SIWs). The crossed slot is etched over the cavity and is excited from two orthogonal directions to realize dual-polarization. Owing to the orthogonality between the TE210 and TE120 mode, high isolation and low cross-polarization are achieved. A prototype of the designed antenna array operating at 25 GHz is fabricated and measured. The measured results confirm that the presented array antenna has high port isolation (> 41 dB), high cross-polarization discrimination (XPD) (>26 dB) and high aperture efficiency (40%). With advantages of simple configuration, good radiation performance and easy fabrication, this proposed array antenna is a good candidate for millimeter-wave wireless systems.
- 23 June 2016
- Published by Springer Nature
- p. 461-469
Integrated Narrow Band and UWB Reconfigurable Antenna
- 23 June 2016
- Published by Springer Nature
- p. 461-469
Integrated Narrow Band and UWB Reconfigurable Antenna