Stephan Bruening
Research Subjects
Stephan Bruening has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
Arnold Gillner
Fraunhofer ILT, Steinbachstr. 15, 52074 Aachen, Germany
3 shared publicationsKeming Du
Edgewave GmbH, Carlo-Schmid Str. 19, 52146 Würselen, Germany
3 shared publications- Arnold Gillner
Fraunhofer Institute for Laser Technology ILT, Steinbachstr. 15, 52074 Aachen, Germany
1 shared publication G. Jenke
Saueressig GmbH + Co KG
1 shared publication- Guido Hennig
Emeritus of Daetwyler Graphics AG
1 shared publication - Kun Du
School of Resources and Safety Engineering, Central South University, Changsha 410083, China
1 shared publication
Latest Publications
- 2 August 2026
- Published by Springer Nature
- p. 1555-1605
Strategies for Fast Ultrashort-Pulsed Laser Micro-structuring of Large Technical Rollers in Printing and Embossing Applications
- 2 August 2026
- Published by Springer Nature
- p. 1555-1605
Strategies for Fast Ultrashort-Pulsed Laser Micro-structuring of Large Technical Rollers in Printing and Embossing Applications
- 1 January 2022
- Published by Optica Publishing Group
- p. AM3I.3
High-throughput ultrafast laser micromachining with multiple parallel spots
The parallel use of a large number of ultrashort pulsed laser beams with individual power modulation creates a completely new digital controllable tool in surface processing. High performance ultrashort pulsed lasers allow the material independent processing in nanometer accuracy, even for large components.
- 1 January 2022
- Published by Optica Publishing Group
- p. AM3I.3
High-throughput ultrafast laser micromachining with multiple parallel spots
The parallel use of a large number of ultrashort pulsed laser beams with individual power modulation creates a completely new digital controllable tool in surface processing. High performance ultrashort pulsed lasers allow the material independent processing in nanometer accuracy, even for large components.
- 20 July 2021
- Published by Frontiers Media SA in Advanced Optical Technologies
- Vol. 10 (4-5) , 315-331
Multi beam microprocessing for printing and embossing applications with high power ultrashort pulsed lasers
Micro structuring of surfaces is of great interest for various applications, e.g. for the tooling industry, the printing industry and for consumer goods. In suitable mass production applications, such as injection molding or roll-to-roll processing for various markets, the final product could be equipped with new properties, such as hydrophilic behavior, adjustable gloss level, soft-touch behavior, light management properties etc. To generate functionalities at reasonable cost, embossing dies can be augmented with additional micro/nano-scale structure using laser ablation technologies. Despite the availability of ultrashort pulsed (USP) high power lasers (up to several hundred watts), it is still a challenge to structure large areas, as required on embossing rolls, in an acceptable processing time for industrial production. In terms of industrial implementation, direct digital transfer is a limiting factor for ultrahigh resolution. Shorter machining times by further increasing spot or workpiece motion are limited. Enlarging the ablation diameter, and thus the tool diameter, delivers a higher ablation rate with the comparable ablation quality, but entails a reduction in resolution. While maintaining the achieved state-of-the-art performance, upscaling of single modulated lasers provides a less demanding way to increase productivity. In the processing of steel surfaces, an increase in material removal can also be achieved by using pulse burst. In this work, the parallel process of single modulated multi laser sources is compared with a laser source split by diffractive optical elements (DOE) for applications in a cylinder micro patterning system. A newly developed highly compact ps laser with repetition rates up to 8 MHz and an average power of 300 or 500 W was divided into 8 or 16 parallel beamlets by a DOE. The ablation rate of each approach was investigated by typical microstructures on copper surfaces. At surface speeds of 10 m/s and a resolution of 5080 dpi, an ablation rate of up to 27 mm³/min was achieved. Different functional surface geometries were realized on an embossing roll as master, which is used for replication of the structures in roll-to-roll processes. Functional structures, such as friction reduction, improved soft touch or light guiding elements on large surfaces are demonstrated.
- 20 July 2021
- Published by Frontiers Media SA in Advanced Optical Technologies
- Vol. 10 (4-5) , 315-331
Multi beam microprocessing for printing and embossing applications with high power ultrashort pulsed lasers
Micro structuring of surfaces is of great interest for various applications, e.g. for the tooling industry, the printing industry and for consumer goods. In suitable mass production applications, such as injection molding or roll-to-roll processing for various markets, the final product could be equipped with new properties, such as hydrophilic behavior, adjustable gloss level, soft-touch behavior, light management properties etc. To generate functionalities at reasonable cost, embossing dies can be augmented with additional micro/nano-scale structure using laser ablation technologies. Despite the availability of ultrashort pulsed (USP) high power lasers (up to several hundred watts), it is still a challenge to structure large areas, as required on embossing rolls, in an acceptable processing time for industrial production. In terms of industrial implementation, direct digital transfer is a limiting factor for ultrahigh resolution. Shorter machining times by further increasing spot or workpiece motion are limited. Enlarging the ablation diameter, and thus the tool diameter, delivers a higher ablation rate with the comparable ablation quality, but entails a reduction in resolution. While maintaining the achieved state-of-the-art performance, upscaling of single modulated lasers provides a less demanding way to increase productivity. In the processing of steel surfaces, an increase in material removal can also be achieved by using pulse burst. In this work, the parallel process of single modulated multi laser sources is compared with a laser source split by diffractive optical elements (DOE) for applications in a cylinder micro patterning system. A newly developed highly compact ps laser with repetition rates up to 8 MHz and an average power of 300 or 500 W was divided into 8 or 16 parallel beamlets by a DOE. The ablation rate of each approach was investigated by typical microstructures on copper surfaces. At surface speeds of 10 m/s and a resolution of 5080 dpi, an ablation rate of up to 27 mm³/min was achieved. Different functional surface geometries were realized on an embossing roll as master, which is used for replication of the structures in roll-to-roll processes. Functional structures, such as friction reduction, improved soft touch or light guiding elements on large surfaces are demonstrated.
- 18 December 2019
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 32 (1) , 012003
High-throughput micromachining with ultrashort pulsed lasers and multiple spots
A one step functionalization of large surfaces and layers could be enabled by high power ultrashort pulsed lasers. Despite today's availability of high power ultrashort pulsed lasers (up to several hundred watts), it is still a challenge to structure large surface areas, which is required on embossing rollers, within an acceptable processing time for industrial roll-to-roll production. Furthermore, fluencies near the ablation threshold are necessary to provide the highest depth resolution with minor side effects. So, it is a challenge to convert the increasing high average laser power into a high processing speed by maintaining the well-known quality of ultrashort pulsed lasers constant. One approach is the combination of a high-speed application and several parallel ablating laser spots. In this contribution, a newly developed high compact picosecond laser with high pulse repetition rates and an average power of 500 W was distributed into 8 and 16 parallel beamlets by a diffractive optical element. The power was controlled by single acousto-optical modulators per beamlet. Different functional surface geometries have been realized on an embossing roller as a master, which is used for the replication of the structures in a roll-to-roll or a roll-to-plate process. Feature sizes from 2 μm to 10 μm in areas of 2 m2 could be processed. With this approach, functional structures such as reduction in friction, improved soft touch, or light guiding elements can be generated on large surfaces within short processing times.
- 18 December 2019
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 32 (1) , 012003
High-throughput micromachining with ultrashort pulsed lasers and multiple spots
A one step functionalization of large surfaces and layers could be enabled by high power ultrashort pulsed lasers. Despite today's availability of high power ultrashort pulsed lasers (up to several hundred watts), it is still a challenge to structure large surface areas, which is required on embossing rollers, within an acceptable processing time for industrial roll-to-roll production. Furthermore, fluencies near the ablation threshold are necessary to provide the highest depth resolution with minor side effects. So, it is a challenge to convert the increasing high average laser power into a high processing speed by maintaining the well-known quality of ultrashort pulsed lasers constant. One approach is the combination of a high-speed application and several parallel ablating laser spots. In this contribution, a newly developed high compact picosecond laser with high pulse repetition rates and an average power of 500 W was distributed into 8 and 16 parallel beamlets by a diffractive optical element. The power was controlled by single acousto-optical modulators per beamlet. Different functional surface geometries have been realized on an embossing roller as a master, which is used for the replication of the structures in a roll-to-roll or a roll-to-plate process. Feature sizes from 2 μm to 10 μm in areas of 2 m2 could be processed. With this approach, functional structures such as reduction in friction, improved soft touch, or light guiding elements can be generated on large surfaces within short processing times.
- Open Access
- 1 January 2018
- Published by Elsevier in Procedia CIRP
- Vol. 74, 573-580
Ultra-fast laser micro processing by multiple laser spots
- 1 January 2018
- Published by Elsevier in Procedia CIRP
- Vol. 74, 573-580
Open AccessUltra-fast laser micro processing by multiple laser spots