SGSelvarani Govindasamy-Lucey

Selvarani Govindasamy-Lucey

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Selvarani Govindasamy-Lucey has a total of 35 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Frozen storage is detrimental to the functionality of cream cheese and mascarpone even in high-pressure-treated samples

    by L.A. Jiménez-Maroto, S. Govindasamy-Lucey, J.J. Jaeggi, M.E. Johnson, J.A. Lucey

    Cream cheese and mascarpone are 2 popular types of fresh cheeses. In the United States, these cheeses have recently experienced growth in their exports due to their popularity in baking and dessert applications (e.g., cheesecake and tiramisu). Historically, these products were consumed quickly, but the introduction of processing methods like hot packing (where the hot product is filled directly into the final containers) has facilitated a much longer shelf life. Freezing is a widely used approach to extend the shelf life of cheeses such as low-moisture part-skim mozzarella, but to our knowledge it is not used for many fresh cheeses. The high moisture and low protein contents of these fresh cheeses could increase the risk that the freezing process could damage the protein matrix. We investigated the impact of various storage temperatures on the texture, rheological properties, as well as functionality in key food applications, of these 2 types of fresh cheeses. The freezing point of cream cheese and mascarpone has not been published but we considered that it should be <0°C, and that temperatures around 0°C may be considered a type of superchilling (or use of very low refrigeration temperatures). We obtained commercially manufactured cream and mascarpone cheeses 1 wk after manufacture and then stored cheeses at 4°C, 0°C, or -18°C for 450 d. Yeast and molds can limit the shelf life of fresh cheeses. High-pressure processing (HPP) can easily inactivate yeasts and molds, so we also tested the impact of HPP (after packaging) on the properties of these cheeses that were part of the temperature trials. Both types of cheese held at -18°C exhibited a reduction in firmness during storage. There was no significant change in firmness for both cheese samples when stored at 4°C or 0°C. A grainy texture was observed in the frozen cream cheese samples; HPP treatment slightly improved the graininess. Cracks and a brittle body were observed in the frozen mascarpone cheese samples, which appeared smoother with HPP treatment. Cheesecakes made with frozen cream cheese samples were weaker than cheeses stored at 4°C or 0°C, which hardly changed in hardness during the storage period. Similar trends for cheesecake hardness were seen in HPP-treated cheeses. We evaluated the yield stress of foams prepared from tiramisu desserts made with mascarpone cheese. Frozen storage reduced the yield stress of tiramisu foams; yield stress of foams made from the mascarpone cheeses stored at 4°C or 0°C hardly changed during the storage period. The freezing points of cream cheese and mascarpone were determined by differential scanning calorimetry to be approximately -8°C and -2°C, respectively. Frozen storage was highly detrimental to the texture and functionality of both cream cheese and mascarpone and should be avoided.


  • Open Access

    Impact of moisture content and age on the properties of microwaved shelf-stable puffed snacks made from Cheddar cheese

    by J.M. Pronschinske, S. Govindasamy-Lucey, J.J. Jaeggi, R.A. Ibáñez, M.E. Johnson, J.A. Lucey

    Microwave heating of certain foods (e.g., popcorn) can produce an expanded, puffed structure. During certain baking conditions, some cheeses (e.g., mozzarella) can form expanded structures (e.g., blisters on pizza). However, Cheddar cheese usually melts during heating instead of expanding. Our hypothesis is that by altering the proportions of moisture, protein, and fat content in cheese by drying, perhaps we can achieve a cheese composition or texture more favorable to expansion (i.e., less meltable) during microwave heating. A licensed Wisconsin cheesemaker made 4 batches (n = 4) of Cheddar cheese over a 90-d period. Cylinders (9 mm in height × 13 mm in diameter) were cut from the cheese at 7, 14, 30, 90, and 180 d of age during ripening at 4°C. These cylinders were dried for various periods in a Parmesan drying room (15.5°C, 70% relative humidity, ~10 m3/min air flow) to make partially dried cheeses with target moisture contents of 20%, 16%, and 12% (and thus, protein contents of 31.2%, 32.9%, and 34.3%, respectively). During heating, none of the partially dried cheese samples melted (loss tangent values <1) when measured with small-strain oscillatory rheology. The partially dried cheeses were heated in a homestyle 900-W microwave oven (35-75 s at 100% power) to attain expanded puffs with ~1.4% moisture and ~0.2 water activity. A split-plot design was used to analyze the impact of the age of the cheese, composition, and their interactions on the properties of the puffs. At 7 d of cheese age, puffs made from cheeses dried to 20% moisture expanded the most, and puffs made from cheeses dried to 12% moisture expanded the least. For cheeses dried to 20% moisture, puff expansion (%) decreased as the age of the cheese (before expansion) increased. Puff texture was assessed by trained sensory panelists (n = 8-10) using a 15-point quantitative descriptive analysis scale and a texture analyzer equipped with an acoustic detector. Sensory hardness and crunchiness of the puffs increased as the moisture content of the dried cheese decreased from 20% to 12%, whereas the quantity of force and sound peaks decreased. Puffs made from cheese dried to 12% moisture achieved higher acoustic peaks (~90 dB) than puffs made from cheese dried to 20% moisture (~80 dB). Scanning electron micrographs of the puffed cheeses indicated well-defined strands of protein were observed in puffs made from cheeses dried to 16% and 12% moisture. All partially dried cheeses expanded during microwave heating. We have demonstrated a novel way of making puffed snacks from Cheddar cheese. In our system, increasing the ripening time of cheese and decreasing the moisture content of the dried cheese (which caused a concomitant increase in the protein content) decreased the expansion of the puffs.


  • Open Access

    Use of milk powders to manufacture panela cheese by a wheyless cheesemaking process

    by S. Sen, S. Govindasamy-Lucey, J.J. Jaeggi, M.M. Molitor, M.E. Johnson, J.A. Lucey

    Manufacturing cheese using only milk powders (not liquid milk) and a wheyless process could be highly beneficial for developing nations, owing to the limited availability of fresh milk and the lack of proper whey handling equipment. A wheyless process, using milk powders, is very challenging for semihard cheeses because it requires the rehydration of milk powders to very high protein levels (≥20%). The solubility and rennet coagulation properties of a range of commercial high-protein milk powders were evaluated. Incomplete rehydration (and often gelation) was observed for the commercial milk powders at ≥15% total protein (most form sticky gels at 12.5% total protein). A modified micellar CN (MMC) powder was developed that was whey protein-depleted (by ∼4.5-fold compared with a milk protein concentrate 80, MPC80), using microfiltration, which could allow us to use high temperatures (if necessary) for rehydration purposes. To improve solubility, the MMC retentate was 40% calcium depleted (by acidifying the chilled microfiltration retentate to pH 5.7 and then performing UF and diafiltration). Lactose was added back (∼24%) and monovalent ions (generated by nanofiltration of UF permeate) to MMC before spray drying. A wheyless cheesemaking process was explored with several milk powders using panela cheese as a model system. Panela is a Hispanic-style fresh, soft, nonmelting cheese that uses few or no starters. Most commercial panela cheeses have a pH value of ∼6.3. Our goal was to investigate the effect of our experimental MMC, commercial micellar CN (MC) and commercial MPC70 at 2 pH levels (original and adjusted to pH 6.3) on the functionality of natural, wheyless panela cheeses manufactured in a high-shear, process cheese-type cooker. Wheyless cheeses were also compared with a control panela cheese that was made using fresh, whole milk that included a conventional whey-drainage step. Proteolysis, rheology, texture, and sensory attributes of cheese were monitored at 7, 21, and 45 d of refrigerated storage. The MMC powder could be readily rehydrated to ∼20% protein and had good rennet coagulation properties. In contrast, the commercial milk powders did not rehydrate well and had a sticky, doughy texture. Storage time had no effect on proteolysis (pH 4.6-soluble N) or hardness in our experimental wheyless cheeses. In contrast, the control panela was much harder but softened during storage, which coincided with an increase in proteolysis. Wheyless panela made from MPC70 had high levels of pH 4.6-soluble N even after only 7 d of storage, which was caused by the high concentration of whey proteins in this cheese (which are soluble at pH 4.6). Panela made from MMC exhibited more meltability, likely due to the reduced calcium content. Wheyless panela cheese made from commercial powders were associated with stale, cooked, and adhesive sensory attributes, and the wheyless panela made from MMC was associated with melting, browning and cohesive attributes. The wheyless recipe developed for this study using the MMC powder could be successfully used by cheese manufacturers to produce panela with good textural and sensory properties, as well as an extended performance shelf life.


  • Open Access

    Low-moisture part-skim mozzarella made from milk with varying casein contents

    by A.V. Swaminathan, S.K. Lillevang, S. Govindasamy-Lucey, J.J. Jaeggi, M.E. Johnson, J.A. Lucey

    There is growing interest in manufacturing cheese from concentrated milk as this increases plant productivity and output. Low-moisture part-skim (LMPS) mozzarella is widely used in pizza applications, where its functionality is very dependent on the protein and calcium contents. We explored the effect of using milk with elevated casein levels on the properties of LMPS mozzarella cheese. Ultrafiltration was used to produce cheese milk with 2.5%, 4.0%, and 5.5% casein. All cheese milk was preacidified with lactic acid to pH 6.0, lactic cultures were added, and whey drainage was performed when curd reached pH ∼5.7. We also explored varying the pH value at milling (pH 5.4 and 5.1) for these cheeses to determine if that could be a useful parameter to modify the functionality in cheeses made from concentrated milk. Increasing the casein content of milk resulted in an increase in the total calcium contents. However, all milk had a similar insoluble calcium content when this component was expressed as milligrams per gram of protein, but the ratio of insoluble calcium as a percent of total calcium increased because of the loss of soluble calcium in the permeate. Cheeses manufactured from milk with 5.5% casein had significantly lower moisture contents compared with cheeses made from milk with 2.5% casein. Altering the pH at milling did not cause a significant difference in the total calcium content of cheese but slightly reduced the insoluble calcium content when the curds were milled at pH 5.1 compared with curds milled at pH 5.4. Lower pH values at milling also resulted in lower pH values of the cheeses during storage and lower insoluble Ca levels. Higher instrumental hardness and sensory firmness were observed in cheeses made from milk with higher casein levels. Shred straightness and shred length scores during storage remained higher (and generally acceptable) in cheeses made from milk with higher casein levels. Blister quantity scores on pizza were initially higher (significant blistering) in LMPS mozzarella cheese made from 5.5% casein milk, but by 12 wk of refrigerated storage, principal component analysis (PCA) indicated that blister quantity was now more associated with the cheeses made from lower casein milk. The PCA indicated that cheeses made from higher casein milk were separated from the cheeses made from lower casein milk over the entire storage period. Generally acceptable pizza and shredding performance was observed in all treatments during most of the storage period, likely helped by the preacidification of cheese milk to pH 6.0 and the use of a low pH at whey drainage (∼5.7). The cheese made from high-casein milk retained better functionality (e.g., thicker strands during stretching, longer shreds, and higher firmness) during an extended refrigerated storage. The lower moisture content of the cheeses made from concentrated milk could be easily corrected by adjusting some of the cheesemaking parameters (e.g., cutting conditions or less stirring). Concentrated milk was suitable for producing LMPS mozzarella with desired pizza functionality.


  • Open Access

    Extending the performance shelf life of direct-salted block Gouda

    by L.A. Jiménez-Maroto, S. Govindasamy-Lucey, J.J. Jaeggi, M.E. Johnson, J.A. Lucey

    Direct-salted, block Gouda has recently become a popular cheese that is made in the United States, mostly for export purposes. The dairy industry uses 2 types of manufacturing options for this cheese; stirred curd (SC) and milled curd (MC), and we wanted to explore if there were any differences in the properties of cheese made with these 2 different methods. We also investigated 2 options to help extend the performance shelf life and functionality of this direct-salted Gouda cheese: high-pressure processing (HPP) and the use of different storage temperatures. Batches (n = 4) of direct-salted Gouda cheese were produced using a reduced proteolytic coagulant (camel chymosin to help extend the shelf life) by both SC and MC Gouda cheese approaches. After 1 mo of ripening, cheeses were divided into 2 pressure groups: control (non-HPP) and HPP (600 MPa for 3 min), then stored at 3 different storage temperatures (-18, 0, or 4°C). Analyses were performed during storage up to 365 d. The pH of samples stored at 4°C and non-HPP treated increased significantly during storage. There was little change in the pH values for all the HPP-treated or non-HPP samples stored at 0°C or at -18°C. Starter and nonstarter bacteria counts were reduced by ∼3 and 5 log cfu/mL, respectively, by HPP. In the HPP-treated samples stored at 4°C, bacterial numbers slowly increased during the 365-d storage period. Proteolysis (pH 4.6 soluble N) was negatively affected by the use of lower storage temperature and HPP treatment. Dynamic small-amplitude oscillatory rheology indicated that cheese meltability (maximum loss tangent) was increased by HPP treatment, likely due to the small, immediate reduction in the insoluble calcium levels in cheese caused by HPP. Hardness decreased during cheese storage at -18°C, possibly due to some disruption in the body of the cheese (e.g., more brittleness) because of freezing/thawing. The length of shreds prepared from Gouda cheese greatly decreased during storage at 4°C and in frozen samples that were non-HPP treated. Shred length was mostly retained during the 365-d period in samples stored at 0°C and HPP treated. The MC cheese had a longer shred functionality shelf life than the SC cheese. Frozen Gouda cheese exhibited some loss of functionality during the long storage period. The combination of storage at 0°C and HPP treatment helped to retain high performance properties during the 365-d shelf life and could be another attractive option for extending the performance shelf life of direct-salted block Gouda cheese.


  • Open Access

    Impact of protein content and pH on the properties of microwaved, expanded, shelf-stable cheese puff snacks made from dairy powders

    by J.M. Pronschinske, S. Govindasamy-Lucey, J.J. Jaeggi, R.A. Ibáñez, M.E. Johnson, J.A. Lucey

    Certain cheeses (e.g., Mozzarella) can be stretched and molded when heated. If a cheese can stretch, perhaps its properties can also be modified to allow it to expand during microwave heating and drying to produce a crunchy, shelf-stable snack. To investigate this concept, we made a model system similar to pasteurized process cheese product (PPCP) that allowed us to vary 2 key parameters; protein (PN) content and the pH value, and to limit the meltability due to the high levels of intact casein. Cylinders of PPCP were microwaved to try to produce shelf-stable cheese puffs. Nine different PPCP treatments were made (n = 3) in a process cheese cooker using micellar casein powder, anhydrous milkfat, lactose, maltodextrin (MD), NaCl, trisodium citrate (TSC), citric acid (CA), and water. The MD addition was used to vary the PN content of PPCP from 30% (0% MD), 24% (∼8.3% MD), and 20% (∼16.8% MD). The use of MD allowed us to keep the moisture content constant in all the treatments. The pH values were varied from 5.7, 5.4, and 5.0, and the experimental design was a 3 × 3 factorial design of 3 PN levels and 3 pH levels. Ingredients were mixed in the process cheese cooker and then heated to 82°C for 2 min. All PPCP samples exhibited no melting (i.e., loss tangents <1) during heating when measured by small-strain oscillatory rheology. Buffering curves of the PPCP indicated that little of the indigenous colloidal calcium phosphate remained in the PPCP due to the addition of TSC and CA. After preliminary investigation, we found that expanded cheese could be formed from cylinders (9 mm in height × 13 mm in diameter) that were cut from PPCP and heated in a 900-W homestyle microwave oven for 45 to 70 s. These expanded puffs had a water activity of 0.24 ± 0.05. The puffs made from 30% PN samples expanded more (expansion of ∼440%) compared with the puffs made from 24% PN or 20% PN samples (expansions of ∼260% and ∼210%, respectively) when measured by glass bead displacement. In contrast, expansion was not significantly affected by the pH value of the PPCP base. After 1 wk of storage at room temperature, cheese puffs were evaluated by quantitative descriptive sensory analysis for textural attributes using trained panelists (n ≥8) based on a 15-point scale for texture. Crunchiness, tooth packing, and hardness attributes were lower for 30% PP than the values for 20% PP. Tooth cling, evaluated on a 6-point scale, was highest for 20% PP (∼4.5). Puff texture was unaffected by the pH value. Scanning electron microscopy showed thicker cell walls for the puffs made from 24% and 20% PN samples when compared with 30% PN samples. Our model PPCP system could puff and expand, but the MD added to adjust (reduce) the PN content negatively affected expansion. The PN content of the PPCP was more important than the pH value for its expansion properties. A lack of melt during heating appeared to help facilitate expansion when PPCP was heated in a microwave.


  • Open Access

    Combining high-pressure processing and low storage temperature to extend the functionality shelf life of low-moisture, part-skim mozzarella cheese

    by L.A. Jiménez-Maroto, S. Govindasamy-Lucey, J.J. Jaeggi, M.E. Johnson, J.A. Lucey

    High pressure processing (HPP) and low temperature storage (0°C) were explored as alternatives to freezing for extending the performance shelf life of low-moisture part-skim (LMPS) Mozzarella intended for export. Batches (n = 5) of reduced Na LMPS Mozzarella were manufactured using camel chymosin as a lower proteolytic type of rennet. Cheeses were stored for 2 wk at 4°C, divided into control (non-HPP) and HPP (600 MPa for 3 min) groups, and stored at 3 different temperatures (4, 0, and -18°C) for 365 d. Analyses were performed at 0, 90, 150, 210, 270, and 365 d of storage. Frozen and 0°C samples (∼2.3 kg) were thawed/tempered at 4°C for 1 wk before analysis. Urea-PAGE and quantification of the pH 4.6 soluble N over time were used to monitor primary proteolysis. Body and rheological properties were monitored using texture profile analysis (TPA) and dynamic low-amplitude oscillatory rheology. Changes in flavor, body, shred properties, and pizza performance were evaluated using quantitative descriptive analysis with 12 trained panelists using a 15-point scale. HPP treatment caused ∼5 log cfu/ml reduction in starter counts, partial solubilization of the insoluble Ca, and a small pH increase (from ∼5.2 to 5.3). The rate of primary proteolysis was reduced by HPP and low temperature storage. HPP treatment reduced initial cheese hardness, but no further significant decrease was observed over storage time, while the hardness of non-HPP samples decreased over the 365 d of storage, apart from the frozen samples. In pizza applications, blister quantity development and loss of strand thickness were limited by storage at -18°C. Freezing LMPS Mozzarella to -18°C gave the least changes in proteolysis and pizza performance over the 365 d of study, storage of cheese at 0°C slowed the loss of hardness and the deterioration of pizza performance attributes. The combination of HPP and 0°C storage of cheese resulted in little change in blistering quantity of pizza during the 365 d of study, whereas cheese stored at 0°C had blisters covering much of the pizza after this extended storage time. Combining HPP with low temperature storage is a promising alternative approach to freezing for the extension of the functionality shelf life of LMPS Mozzarella.


  • Open Access

    Impact of pre-acidification on the functionality and insoluble calcium levels of low-moisture part-skim mozzarella made from high-casein milk

    by Aakash Varsha Swaminathan, S⊘Ren K. Lillevang, Selvarani Govindasamy-Lucey, John J. Jaeggi, Mark E. Johnson, J.A. Lucey

    The use of low-concentration-factor ultrafiltered (LCF-UF) milk for cheesemaking has become popular in recent years. Research on using LCF-UF milk to make low-moisture part-skim (LMPS) mozzarella manufacture is limited due to concerns about the negative effect of the higher CN content on functional properties, such as melt and stretch. Pre-acidification (PA; reflects acid added to milk before the addition of the starter culture) has been used in low- and nonfat mozzarella cheeses to lower calcium levels and improve their texture and melting properties. We explored the use of PA to reduce the insoluble calcium content of cheese (calcium that is a crosslinking material for the CN proteins) and its effect on the functionality of LMPS mozzarella made from high-CN (4.2%) milk. Seven vats of LMPS mozzarella, with a control (no PA), 2 pH values for PA (6.40 and 6.00) and 3 different acidification methods (use of acetic, citric, or carbonic acid from carbon dioxide) were evaluated for their effect on solubilization of colloidal calcium phosphate during LMPS manufacture. Composition, proteolysis, and microstructural and functional changes in the LMPS cheeses were monitored during 90 d of refrigerated storage. All cheeses had similar composition except for the cheese made with milk PA with carbonic acid, which had a lower fat-in-dry matter, probably due to foaming observed in this sample during the gas sparging. The cheese made with milk PA with citric acid to pH 6.00 had the lowest amount of total and insoluble calcium compared with other cheeses at all steps during cheese manufacture and storage, likely due to the calcium chelating ability of citric acid. The cheese that was made with milk PA with citric acid to pH 6.40 had a trend of slightly lower (not significant) total and insoluble calcium during cheese manufacture compared with other cheeses that were made with milk PA to pH 6.40. The pH value in all the cheeses remained similar throughout 90 d of storage, whereas the cheese that was made with milk PA with citric acid to pH 6.00 had the lowest pH values during storage. Treatment significantly affected instrumental hardness, the maximum loss tangent during heating, the melting temperature, and the storage modulus values measured at 70°C. Proteolysis was not affected by treatment, suggesting that typical aging should occur. Cheese that was PA with citric acid to pH 6.00 initially had lower maximum loss tangent values and higher hardness, possibly due to the lower pH value of this cheese. The performance of cheeses on pizza was assessed using the Sensory Spectrum method and quantitative descriptive analysis. The PA of cheese milk with citric acid helped to reduce the insoluble Ca level and at 30 and 90 d of storage, these cheeses had lower first chew hardness, lower chewiness, and lower strand thickness values compared with other cheeses. The use of PA could help improve the functionality of LMPS mozzarella made from milk high in CN, with citric acid being the most efficient in dissolving the insoluble calcium from CN.


  • Open Access

    Heat-stable whey protein isolate made using isoelectric precipitation and clarification

    by G.Y. Subbiah Prabhakaran, M. Molitor, S. Govindasamy-Lucey, J.A. Lucey

    Residual lipids (RL) in whey protein isolate (WPI) are detrimental to optimal functional applications (like foaming and low turbidity) and contribute to off-flavor development during powder storage. The objective of this research was to prepare an experimental WPI by removing RL without using the traditional microfiltration (MF) process and compare its properties with commercially available WPIs made using MF and some other whey powders. We hypothesize that by adjusting the pH of whey to < 5.0, we would be close to the isoelectric point of any remaining denatured proteins (DP) and phospholipoproteins (PLP), and therefore reduce electrostatic repulsion between these molecules. Further, demineralization of the acidified whey protein solution by ultrafiltration (UF) combined with diafiltration (DF) should reduce ionic hindrance to aggregation and thereby help with the aggregation of these denatured proteins as well as most RL; centrifugation or clarification could be used to remove these materials. Calcium should also be more extensively removed by this approach, which should improve the heat stability of the experimental WPI. Demineralization was achieved on a pilot scale by acidifying liquid (cheese) whey protein concentrate (WPC-34) to pH 4.5 using HCl, and UF the whey protein solution along with extensive DF using acidified (pH∼3.5) reverse osmosis filtered (RO) water. Demineralized whey protein solution was adjusted to various combinations of pH (4.1 to 4.9), conductivities (500 to 2000 μS.cm-1), and protein concentrations (1 to 7%) and then centrifuged at 10,000 × g for 10 min. The effective sedimentation (precipitation) of RL in these treatments was estimated by measuring the turbidity of the supernatants. Maximum precipitation was observed at pH 4.5-4.7. Reducing conductivity via UF/DF increased the precipitation of RL due to reduced ionic hindrance to aggregation Maximum sedimentation of RL was observed at protein concentrations ≤3% because of a higher density difference between the precipitate and serum phase. SDS-PAGE analysis confirmed the sedimentation of PLPs, caseins, and DPs upon isoelectric precipitation at pH ∼4.5, while native whey proteins or undenatured whey proteins remained soluble in the supernatant, unaffected by the pretreatment. To scale up the process, 750 L of fluid WPC34 was acidified and demineralized by UF (volume concentration factor = 1.35) and DF until the permeate solids reached 0.1% (when desired demineralization was achieved), clarified using a pilot-scale desludging clarifier to remove RL, neutralized, ultrafiltered to concentrate the protein, and then spray-dried to produce an experimental WPI (91% protein and 1.8% fat db). In another trial, demineralized UF concentrate was clarified by gravity sedimentation and the supernatant was neutralized, ultrafiltered, and spray-dried to produce a second experimental WPI (91% protein and < 1% fat db). These experimental WPI powders were compared with several commercially available WPI powders to assess functional properties like solubility, heat stability, foamability and foam strength, gelation, and sensory attributes over accelerated storage. Experimental WPI had excellent functional properties, had low turbidity, were highly heat stable and only developed very slight to slight off-flavors upon accelerated storage, their properties were comparable to the WPI manufactured commercially using MF even after accelerated storage.


  • Open Access

    Use of high-pressure processing and low-temperature storage to extend the performance shelf life of 2 types of string cheese

    by M.A. Becher, S. Govindasamy-Lucey, J.J. Jaeggi, M.E. Johnson, B.G. Prochaska, J.A. Lucey

    The manufacturing method of string cheese is similar to mozzarella, but the hot curd is extruded through narrow tubes or pipes, which align the protein fibers that provide the characteristic ability for consumers to pull strings from this cheese. Firmness is another important performance attribute for consumers who just bite into the string cheese without peeling off strings. There have only been a few studies on string cheese, but it is known that stringiness and firmness decrease during prolonged storage, which is a particular challenge for exporting string cheese. We explored 2 treatments to try to retain the stringiness and firmness of string cheese for longer storage periods. The techniques used were high-pressure processing (HPP; 600 MPa for 3 min) and reduced storage temperature (0°C). In other cheese varieties, these techniques have helped extend the performance shelf life. We tested these techniques using the 2 main types of commercial string cheese: direct acid string cheese (DASC) and cultured string cheese (CSC), which were obtained from 2 different manufacturing facilities. The DASC had higher fat (∼2.2%) and higher pH values (∼0.2 units) compared with the CSC. The CSC had higher protein content (∼3.4%), higher insoluble calcium content (∼8 mg insoluble Ca/g protein) and higher texture profile analysis (TPA) hardness values (∼4 N) compared with the DASC. Due to the compositional differences, the 2 varieties were statistically analyzed separately for all other attributes. In both cheese types, HPP caused an immediate reduction in stringiness, some solubilization of insoluble calcium, and a slight increase in the cheese pH values. High-pressure processing also caused a slight increase in TPA hardness of the CSC samples until 14 d (possibly due to a slight increase in cheese pH). The use of the 0°C storage temperature reduced proteolysis and helped retain firmness during storage. Low-temperature storage could help extend the performance shelf life of string cheese by a couple of months, but HPP was not suitable, as the process caused an immediate reduction in stringiness due to the disruption of the matrix induced by the HPP treatment.