Guodong Yue
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Guodong Yue has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
Bo Ren
School of Mechanical Engineering, Shenyang Jianzhu University, Shenyang, China
3 shared publicationsJie Huang
School of Mechanical Engineering, Shenyang Jianzhu University, Shenyang, Liaoning, CHINA
3 shared publicationsMaobo Xiao
Shenyang Railway Signal Co., Ltd, Shenyang, Liaoning, China
3 shared publicationsDazhi Wang
Key Lab Micro Nano Technology System Liaoning Province, School of Mechanical Engineering, Dalian University of Technology, Dalian, China
2 shared publications- Dong An
School of Mechanical Engineering, Shenyang Jianzhu University, Shenyang 110168, China
2 shared publications Hao Li
Baicheng Maintenance Section of China Railway Shenyang Group Co., Ltd, Baicheng, Jilin, China
2 shared publications
Latest Publications
- 13 October 2026
- Published by SAGE Publications in Structural Health Monitoring
Robust feature characterization and sparse reconstruction of rail acoustic emission signals under impulsive noise
Low-frequency (< 3000 Hz) acoustic emission sensing is ideal for long-distance railway monitoring due to its high propagation speed and low attenuation. However, heavy-tailed impulsive noise often compromises signal fidelity and monitoring reliability. Traditional correntropy matching pursuit (CMP) with Gaussian kernels is frequently ineffective against such interference, leading to the loss of critical transient features. This article proposes an α -stable CMP (ACMP) algorithm integrated with K-singular value decomposition (K-SVD) dictionary learning. ACMP utilizes a novel translation-invariant kernel derived from the α -stable distribution’s characteristic function and an adaptive residual-weighting mechanism within a half-quadratic framework to suppress impulsive outliers while preserving transient signatures. Evaluations included large-scale Monte Carlo simulations ( n = 100) and field-collected rail-gap signals with controlled α -stable noise. Statistical assessments (Friedman and Holm-corrected Wilcoxon tests) showed significant improvements over orthogonal matching pursuit and CMP with large effect sizes. Comparison with an adapted deep-learning (adaptive denoising autoencoder) baseline further demonstrated ACMP’s superior reconstruction fidelity under the investigated conditions. Time–frequency analyses confirmed an optimal balance between noise reduction and feature preservation. The primary innovations lie in the construction of the noise-matched α -stable kernel and its integration into a tailored residual-weighting strategy. As a lightweight preprocessing solution, ACMP addresses data transmission and storage bottlenecks in Internet of Things-based monitoring by compressing high-bandwidth signals via sparse representation, enabling bandwidth-efficient diagnostic information transfer without requiring continuous streaming of raw waveforms.
- 13 October 2026
- Published by SAGE Publications in Structural Health Monitoring
Robust feature characterization and sparse reconstruction of rail acoustic emission signals under impulsive noise
Low-frequency (< 3000 Hz) acoustic emission sensing is ideal for long-distance railway monitoring due to its high propagation speed and low attenuation. However, heavy-tailed impulsive noise often compromises signal fidelity and monitoring reliability. Traditional correntropy matching pursuit (CMP) with Gaussian kernels is frequently ineffective against such interference, leading to the loss of critical transient features. This article proposes an α -stable CMP (ACMP) algorithm integrated with K-singular value decomposition (K-SVD) dictionary learning. ACMP utilizes a novel translation-invariant kernel derived from the α -stable distribution’s characteristic function and an adaptive residual-weighting mechanism within a half-quadratic framework to suppress impulsive outliers while preserving transient signatures. Evaluations included large-scale Monte Carlo simulations ( n = 100) and field-collected rail-gap signals with controlled α -stable noise. Statistical assessments (Friedman and Holm-corrected Wilcoxon tests) showed significant improvements over orthogonal matching pursuit and CMP with large effect sizes. Comparison with an adapted deep-learning (adaptive denoising autoencoder) baseline further demonstrated ACMP’s superior reconstruction fidelity under the investigated conditions. Time–frequency analyses confirmed an optimal balance between noise reduction and feature preservation. The primary innovations lie in the construction of the noise-matched α -stable kernel and its integration into a tailored residual-weighting strategy. As a lightweight preprocessing solution, ACMP addresses data transmission and storage bottlenecks in Internet of Things-based monitoring by compressing high-bandwidth signals via sparse representation, enabling bandwidth-efficient diagnostic information transfer without requiring continuous streaming of raw waveforms.
- 31 August 2026
- Published by SAGE Publications in Structural Health Monitoring
Effect of rail short-wave irregularity on guided wave in the rail
Rail short-wave irregularities significantly influence wheel–rail interaction and rail integrity. In this study, we developed a three-dimensional finite element model that incorporates short-wave irregularities into the wheel–rail contact simulation. The model captures the transient contact forces and the resulting guided wave propagation along the rail. Our analysis shows that the excited signal propagates primarily as a low-frequency longitudinal guided wave mode with a speed of approximately 5263.16 m s −1 and an attenuation rate of 0.4 dB m −1 . Moreover, the characteristic frequency of the guided wave is found to correlate with both the wheel speed and the wavelength of the rail irregularities, demonstrating the potential for estimating irregularity dimensions from guided wave signals. Field experiments validate the fundamental wave propagation and attenuation characteristics, with an average measured attenuation rate of 0.55 dB m −1 . These findings suggest the feasibility of a nonintrusive technique for potential rail monitoring, offering valuable insights for enhancing railway safety and maintenance.
- 31 August 2026
- Published by SAGE Publications in Structural Health Monitoring
Effect of rail short-wave irregularity on guided wave in the rail
Rail short-wave irregularities significantly influence wheel–rail interaction and rail integrity. In this study, we developed a three-dimensional finite element model that incorporates short-wave irregularities into the wheel–rail contact simulation. The model captures the transient contact forces and the resulting guided wave propagation along the rail. Our analysis shows that the excited signal propagates primarily as a low-frequency longitudinal guided wave mode with a speed of approximately 5263.16 m s −1 and an attenuation rate of 0.4 dB m −1 . Moreover, the characteristic frequency of the guided wave is found to correlate with both the wheel speed and the wavelength of the rail irregularities, demonstrating the potential for estimating irregularity dimensions from guided wave signals. Field experiments validate the fundamental wave propagation and attenuation characteristics, with an average measured attenuation rate of 0.55 dB m −1 . These findings suggest the feasibility of a nonintrusive technique for potential rail monitoring, offering valuable insights for enhancing railway safety and maintenance.
- 28 September 2025
- Published by SAGE Publications in Structural Health Monitoring
Track acoustic signal compression method based on sparse decomposition and M 2to1 -guided resampling
When trains pass over structural discontinuities such as rail gaps or joints, they generate low-frequency acoustic signals characterized by transient impact features. These signals propagate rapidly over long distances and are suitable for track condition monitoring. However, their high sampling rates and volume pose challenges for wireless transmission and real-time processing in structural health monitoring (SHM) systems. To address these issues, this paper proposes a novel compression method tailored for rail impact-induced acoustic signals. The method integrates sparse decomposition with M 2to1. -guided resampling to reduce data dimensionality while preserving fault-relevant transients. The M 2to1. index, a computationally efficient impulsiveness metric, is used to locate pulse-dominant segments, which are then used for k –Singular Value Decomposition (K-SVD) dictionary learning. This approach significantly reduces training time while maintaining high reconstruction fidelity. Experimental validation using field-collected signals from a diesel locomotive passing over a rail gap demonstrates that the proposed method outperforms conventional compression techniques in terms of compression ratio, robustness to noise, and preservation of impact features. These advantages make the method well-suited for deployment in wireless sensor networks for continuous rail SHM.
- 28 September 2025
- Published by SAGE Publications in Structural Health Monitoring
Track acoustic signal compression method based on sparse decomposition and M 2to1 -guided resampling
When trains pass over structural discontinuities such as rail gaps or joints, they generate low-frequency acoustic signals characterized by transient impact features. These signals propagate rapidly over long distances and are suitable for track condition monitoring. However, their high sampling rates and volume pose challenges for wireless transmission and real-time processing in structural health monitoring (SHM) systems. To address these issues, this paper proposes a novel compression method tailored for rail impact-induced acoustic signals. The method integrates sparse decomposition with M 2to1. -guided resampling to reduce data dimensionality while preserving fault-relevant transients. The M 2to1. index, a computationally efficient impulsiveness metric, is used to locate pulse-dominant segments, which are then used for k –Singular Value Decomposition (K-SVD) dictionary learning. This approach significantly reduces training time while maintaining high reconstruction fidelity. Experimental validation using field-collected signals from a diesel locomotive passing over a rail gap demonstrates that the proposed method outperforms conventional compression techniques in terms of compression ratio, robustness to noise, and preservation of impact features. These advantages make the method well-suited for deployment in wireless sensor networks for continuous rail SHM.
- 29 August 2025
- Published by Elsevier in Measurement
- Vol. 257
Rail acoustic signal compression and noise reduction method based on Correntropy Matching Pursuit
- 29 August 2025
- Published by Elsevier in Measurement
- Vol. 257
Rail acoustic signal compression and noise reduction method based on Correntropy Matching Pursuit
- 28 February 2025
- Published by Springer Nature in Journal of Civil Structural Health Monitoring
- Vol. 15 (6) , 1991-2004
Adaptive sparse wavelet packet node selection algorithm for impulse signal compression in railway tracks
- 28 February 2025
- Published by Springer Nature in Journal of Civil Structural Health Monitoring
- Vol. 15 (6) , 1991-2004
Adaptive sparse wavelet packet node selection algorithm for impulse signal compression in railway tracks
- 12 November 2024
- Published by Springer Nature in Acoustics Australia
- Vol. 53 (1) , 65-82
Efficient Data Compression of Acoustic Signals in Rail Using Sparse Decomposition and Kurtosis-Guided Resampling
- 12 November 2024
- Published by Springer Nature in Acoustics Australia
- Vol. 53 (1) , 65-82
Efficient Data Compression of Acoustic Signals in Rail Using Sparse Decomposition and Kurtosis-Guided Resampling
- 8 March 2023
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 111 (10) , 9177-9199
Modal utilization method for measuring the track axial force
- 8 March 2023
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 111 (10) , 9177-9199
Modal utilization method for measuring the track axial force
- 1 April 2022
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 30 (12) , 2487-2494
A dynamic model for measuring axial force in discretely supported rails
In order to measure the axial force in the rail, a dynamic model of discretely supported rails with axial force is first established, and the dynamic response of the rail under a hammering force is studied. First, the rail is simplified to an Euler beam, and its displacement at any point in the frequency domain is derived. Second, a hammer experiment is carried out, and its results are compared with the theoretical results to prove the theoretical derivation. Finally, the effects of axial force, varied sleeper spacings, and the number of loose fasteners on the natural frequency are studied, respectively. The results show that the axial force has a linear relationship with the natural frequencies; when there are many loose fasteners, varied sleeper spacings have a weak influence on the linear relationship between the axial force and the natural frequency; the sensitive frequency band is within 500 Hz. These conclusions indicate how to accurately measure the axial force in the rail and can be effectively applied to engineering practice.
- 1 April 2022
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 30 (12) , 2487-2494
A dynamic model for measuring axial force in discretely supported rails
In order to measure the axial force in the rail, a dynamic model of discretely supported rails with axial force is first established, and the dynamic response of the rail under a hammering force is studied. First, the rail is simplified to an Euler beam, and its displacement at any point in the frequency domain is derived. Second, a hammer experiment is carried out, and its results are compared with the theoretical results to prove the theoretical derivation. Finally, the effects of axial force, varied sleeper spacings, and the number of loose fasteners on the natural frequency are studied, respectively. The results show that the axial force has a linear relationship with the natural frequencies; when there are many loose fasteners, varied sleeper spacings have a weak influence on the linear relationship between the axial force and the natural frequency; the sensitive frequency band is within 500 Hz. These conclusions indicate how to accurately measure the axial force in the rail and can be effectively applied to engineering practice.
- Open Access
- 1 March 2022
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2184 (1) , 012053
Measurement of natural frequency of track based on Bayesian estimation
Track modal parameters obtained by the vibration test contain uncertain factors due to the influence of the test environment, the test equipment, the operator, and the simplification of the modal analysis process. In order to estimate the statistical characteristics of the physical parameters of the track, the conjugate prior distribution is selected in the Bayesian estimation method, and the posterior distribution is derived from the experimental data, and the estimated value of the mean and variance of the natural frequency of the track are obtained. The reliability of the method is verified by simulation and experiment. The results show that when only a few samples can be obtained, the full use of prior information and test data can estimate the frequency parameters and reduce the length of the confidence intervals of the mean and the variance. The proposed method has practical reference value in engineering.
- 1 March 2022
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2184 (1) , 012053
Open AccessMeasurement of natural frequency of track based on Bayesian estimation
Track modal parameters obtained by the vibration test contain uncertain factors due to the influence of the test environment, the test equipment, the operator, and the simplification of the modal analysis process. In order to estimate the statistical characteristics of the physical parameters of the track, the conjugate prior distribution is selected in the Bayesian estimation method, and the posterior distribution is derived from the experimental data, and the estimated value of the mean and variance of the natural frequency of the track are obtained. The reliability of the method is verified by simulation and experiment. The results show that when only a few samples can be obtained, the full use of prior information and test data can estimate the frequency parameters and reduce the length of the confidence intervals of the mean and the variance. The proposed method has practical reference value in engineering.
- Open Access
- 8 August 2020
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2020, 1-11
Guided Wave Propagation for Monitoring the Rail Base
In order to monitor the rail base, the dispersion characteristics and propagation properties of the guided wave are studied. Firstly, two modes named as Modes V1 and V2 are selected by the semianalytical finite element method (SAFE). The region at the bottom edge can be monitored by Mode V1, while the junction of the base edge and the flange can be detected by Mode V2. Then, the characteristics in the propagation process are analyzed using the finite element method (FEM). The two modes can be separated about 0.6 ms after they are excited. Thirdly, a wave attenuation algorithm based on mean is proposed to quantify the wave attenuation. Both waves can have weak attenuation and be detected within 5 m. Finally, a mode-identified experiment is performed to validate the aforementioned analysis. And a defect detection experiment is performed to demonstrate the excellent monitoring characteristics using Mode V2. These results can be used to monitor the rail base in practice engineering.
- 8 August 2020
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2020, 1-11
Open AccessGuided Wave Propagation for Monitoring the Rail Base
In order to monitor the rail base, the dispersion characteristics and propagation properties of the guided wave are studied. Firstly, two modes named as Modes V1 and V2 are selected by the semianalytical finite element method (SAFE). The region at the bottom edge can be monitored by Mode V1, while the junction of the base edge and the flange can be detected by Mode V2. Then, the characteristics in the propagation process are analyzed using the finite element method (FEM). The two modes can be separated about 0.6 ms after they are excited. Thirdly, a wave attenuation algorithm based on mean is proposed to quantify the wave attenuation. Both waves can have weak attenuation and be detected within 5 m. Finally, a mode-identified experiment is performed to validate the aforementioned analysis. And a defect detection experiment is performed to demonstrate the excellent monitoring characteristics using Mode V2. These results can be used to monitor the rail base in practice engineering.