Guochun Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Guochun Li has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
- Jiabiao Lian
Institute for Energy Research, Jiangsu University, Zhenjiang 212013, China
6 shared publications Shuo Zhao
Institute for Energy Research, Zhenjiang Key Laboratory of Power Battery and Energy Storage, Jiangsu University, Zhenjiang 212013, China
5 shared publications- Yingxue Cui
Institute for Energy Research, Jiangsu University, Zhenjiang 212013, China
5 shared publications Chun Xu
4 shared publicationsJiabiao Lian
4 shared publicationsMinggang Huang
4 shared publications
Latest Publications
- Open Access
- 1 July 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (13) , 1015
The Design of the Ni3N/Nb4N5 Heterostructure as Bifunctional Adsorption/Electrocatalytic Materials for Lithium–Sulfur Batteries
Lithium–sulfur (Li-S) batteries are hindered by the sluggish electrochemical kinetics and poor reversibility of lithium polysulfides (LiPSs), which limits their practical energy density and cycle life. In order to address this issue, a novel Ni3N/Nb4N5 heterostructure was synthesized via electrospinning and nitridation as a functional coating for polypropylene (PP) separators. Adsorption experiments were conducted in order to ascertain the heterostructure’s superior affinity for LiPSs, thereby effectively mitigating their shuttling. Studies of Li2S nucleation demonstrated the catalytic role of the substance in accelerating the deposition kinetics of Li2S. Consequently, Li-S cells that employed the Ni3N/Nb4N5-modified separator were found to achieve significantly enhanced electrochemical performance, with the cells delivering an initial discharge capacity of 1294.4 mAh g−1 at 0.2 C. The results demonstrate that, after 150 cycles, the cells retained a discharge capacity of 796.2 mAh g−1, corresponding to a low capacity decay rate of only 0.25% per cycle. In addition, the rate capability of the cells was found to be improved in comparison to control cells with NiNb2O6-modified or pristine separators.
- 1 July 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (13) , 1015
Open AccessThe Design of the Ni3N/Nb4N5 Heterostructure as Bifunctional Adsorption/Electrocatalytic Materials for Lithium–Sulfur Batteries
Lithium–sulfur (Li-S) batteries are hindered by the sluggish electrochemical kinetics and poor reversibility of lithium polysulfides (LiPSs), which limits their practical energy density and cycle life. In order to address this issue, a novel Ni3N/Nb4N5 heterostructure was synthesized via electrospinning and nitridation as a functional coating for polypropylene (PP) separators. Adsorption experiments were conducted in order to ascertain the heterostructure’s superior affinity for LiPSs, thereby effectively mitigating their shuttling. Studies of Li2S nucleation demonstrated the catalytic role of the substance in accelerating the deposition kinetics of Li2S. Consequently, Li-S cells that employed the Ni3N/Nb4N5-modified separator were found to achieve significantly enhanced electrochemical performance, with the cells delivering an initial discharge capacity of 1294.4 mAh g−1 at 0.2 C. The results demonstrate that, after 150 cycles, the cells retained a discharge capacity of 796.2 mAh g−1, corresponding to a low capacity decay rate of only 0.25% per cycle. In addition, the rate capability of the cells was found to be improved in comparison to control cells with NiNb2O6-modified or pristine separators.
- Open Access
- 14 May 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (10) , 734
Shredded-Coconut-Derived Sulfur-Doped Hard Carbon via Hydrothermal Processing for High-Performance Sodium Ion Anodes
The extensive use of sodium-ion batteries has made it important to develop high-performance anode materials. Owing to their good sustainability, low cost, and excellent electrochemical properties, hard carbon materials are expected to be a good choice, especially biomass-derived hard carbon. In this study, we successfully synthesized a coir-based carbon nanosphere as an anode material. The hard carbon has a low degree of structural ordering, small particle size, and multiple pore networks for easy sulfur doping compared to the conventional direct high-temperature sulfur doping. The material has a high reversible capacity of 536 mAh g−1 and an initial Coulombic efficiency of 53%, maintaining a reversible capacity of 308 mAh g−1 at a high current density of 5 A g−1, achieving a capacity retention of 90.3% after 1000 cycles. The performance enhancement stems from a combination of enlarged layer spacing, an increased specific surface area, enhanced porosity, and doped sulfur atoms. This study provides an effective strategy for the conversion of biomass waste into high-performance sodium-ion anode material batteries.
- 14 May 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (10) , 734
Open AccessShredded-Coconut-Derived Sulfur-Doped Hard Carbon via Hydrothermal Processing for High-Performance Sodium Ion Anodes
The extensive use of sodium-ion batteries has made it important to develop high-performance anode materials. Owing to their good sustainability, low cost, and excellent electrochemical properties, hard carbon materials are expected to be a good choice, especially biomass-derived hard carbon. In this study, we successfully synthesized a coir-based carbon nanosphere as an anode material. The hard carbon has a low degree of structural ordering, small particle size, and multiple pore networks for easy sulfur doping compared to the conventional direct high-temperature sulfur doping. The material has a high reversible capacity of 536 mAh g−1 and an initial Coulombic efficiency of 53%, maintaining a reversible capacity of 308 mAh g−1 at a high current density of 5 A g−1, achieving a capacity retention of 90.3% after 1000 cycles. The performance enhancement stems from a combination of enlarged layer spacing, an increased specific surface area, enhanced porosity, and doped sulfur atoms. This study provides an effective strategy for the conversion of biomass waste into high-performance sodium-ion anode material batteries.
- 17 May 2024
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 63 (21) , 9864-9876
Crystalline MnCO3@Amorphous MnOx Composite as Cathode Material for High-Performance Aqueous Zinc-Ion Batteries
Rechargeable aqueous zinc-ion batteries (RAZIBs) have received extensive attention because of their advantages of low cost, high safety, and nontoxicity. However, problems such as dissolution of the active cathode material, dendrites/passivation of the zinc anode, and slow reaction kinetics hindered their further applications. In this work, a crystalline/amorphous composite-type material composed of crystalline MnCO3 and amorphous MnOx was prepared and used as the cathode material for RAZIBs. The MnCO3@amorphous MnOx (MnCO3@A-MnOx) composite possesses the merits of both the pure crystalline phase of MnCO3 and the amorphous phase of MnOx, which can deliver better electrochemical performance than the corresponding single component in repeated cycles. In addition, crystalline MnCO3 undergoes a complex phase transition to the active MnO2 during the first charge process, providing the composite with a stable structure and additional electrochemical capacity. The electrochemical measurement results indicate that the MnCO3@A-MnOx electrode can display high reversible discharge capacity at 0.1 A g-1, excellent rate performance at 5.0 A g-1, and long cycling stability over 2000 cycles, showing great potential as a cathode material for high-performance RAZIBs.
- 17 May 2024
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 63 (21) , 9864-9876
Crystalline MnCO3@Amorphous MnOx Composite as Cathode Material for High-Performance Aqueous Zinc-Ion Batteries
Rechargeable aqueous zinc-ion batteries (RAZIBs) have received extensive attention because of their advantages of low cost, high safety, and nontoxicity. However, problems such as dissolution of the active cathode material, dendrites/passivation of the zinc anode, and slow reaction kinetics hindered their further applications. In this work, a crystalline/amorphous composite-type material composed of crystalline MnCO3 and amorphous MnOx was prepared and used as the cathode material for RAZIBs. The MnCO3@amorphous MnOx (MnCO3@A-MnOx) composite possesses the merits of both the pure crystalline phase of MnCO3 and the amorphous phase of MnOx, which can deliver better electrochemical performance than the corresponding single component in repeated cycles. In addition, crystalline MnCO3 undergoes a complex phase transition to the active MnO2 during the first charge process, providing the composite with a stable structure and additional electrochemical capacity. The electrochemical measurement results indicate that the MnCO3@A-MnOx electrode can display high reversible discharge capacity at 0.1 A g-1, excellent rate performance at 5.0 A g-1, and long cycling stability over 2000 cycles, showing great potential as a cathode material for high-performance RAZIBs.
- 8 April 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 488
A multi-functional CoN-Mo2N heterostructure nanorods for high performance lithium-sulfur batteries
- 8 April 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 488
A multi-functional CoN-Mo2N heterostructure nanorods for high performance lithium-sulfur batteries
- 1 August 2023
- Published by Elsevier in Chemical Engineering Journal
- Vol. 472
An advanced CoNb2O6 anode material with in-situ interstitial doping for high-rate lithium-ion batteries
- 1 August 2023
- Published by Elsevier in Chemical Engineering Journal
- Vol. 472
An advanced CoNb2O6 anode material with in-situ interstitial doping for high-rate lithium-ion batteries
- 20 February 2023
- Published by Elsevier in Chemical Engineering Journal
- Vol. 461
Molten salt synthesis of submicron NiNb2O6 anode material with ultra-high rate performance for lithium-ion batteries
- 20 February 2023
- Published by Elsevier in Chemical Engineering Journal
- Vol. 461
Molten salt synthesis of submicron NiNb2O6 anode material with ultra-high rate performance for lithium-ion batteries
- 12 December 2022
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 295
CoMoO4 nanorods coated separator for high-performance lithium sulfur batteries
- 12 December 2022
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 295
CoMoO4 nanorods coated separator for high-performance lithium sulfur batteries
- Open Access
- 23 October 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (21) , 3724
Nb and Ni Nanoparticles Anchored on N-Doped Carbon Nanofiber Membrane as Self-Supporting Anode for High-Rate Lithium-Ion Batteries
A flexible N-doped carbon nanofiber membrane loaded with Nb and Ni nanoparticles (Nb/Ni@NC) was prepared using electrospinning technology and a subsequent thermal annealing method and used as a self-supporting anode material for lithium-ion batteries. The Nb/Ni@NC nanofiber membrane had excellent flexibility and could be folded and bent at will without fragmentation and wrinkling; the nanofibers also had a uniform and controllable morphology with a diameter of 300–400 nm. The electrochemical results showed that the flexible Nb/Ni@NC electrode could deliver a high discharge capacity of 378.7 mAh g−1 after 200 cycles at 0.2 A g−1 and an initial coulombic efficiency of 67.7%, which was higher than that of the pure flexible NC anode in contrast. Moreover, a reversible discharge capacity of 203.6 mAh g−1 after 480 cycles at 1.0 A g−1 was achieved by the flexible Nb/Ni@NC electrode with a capacity decay for each cycle of only 0.075%, which showed an excellent rate capability and cycling stability.
- 23 October 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (21) , 3724
Open AccessNb and Ni Nanoparticles Anchored on N-Doped Carbon Nanofiber Membrane as Self-Supporting Anode for High-Rate Lithium-Ion Batteries
A flexible N-doped carbon nanofiber membrane loaded with Nb and Ni nanoparticles (Nb/Ni@NC) was prepared using electrospinning technology and a subsequent thermal annealing method and used as a self-supporting anode material for lithium-ion batteries. The Nb/Ni@NC nanofiber membrane had excellent flexibility and could be folded and bent at will without fragmentation and wrinkling; the nanofibers also had a uniform and controllable morphology with a diameter of 300–400 nm. The electrochemical results showed that the flexible Nb/Ni@NC electrode could deliver a high discharge capacity of 378.7 mAh g−1 after 200 cycles at 0.2 A g−1 and an initial coulombic efficiency of 67.7%, which was higher than that of the pure flexible NC anode in contrast. Moreover, a reversible discharge capacity of 203.6 mAh g−1 after 480 cycles at 1.0 A g−1 was achieved by the flexible Nb/Ni@NC electrode with a capacity decay for each cycle of only 0.075%, which showed an excellent rate capability and cycling stability.
- 8 September 2022
- Published by Elsevier in Materials Today Communications
- Vol. 33, 104403
Design of spherical TiN/Nb4N5 heterostructure as bifunctional adsorption/catalytic material for lithium sulfur batteries
- 8 September 2022
- Published by Elsevier in Materials Today Communications
- Vol. 33, 104403
Design of spherical TiN/Nb4N5 heterostructure as bifunctional adsorption/catalytic material for lithium sulfur batteries
- Open Access
- 21 August 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (16) , 2875
High-Value Utilization of Silicon Cutting Waste and Excrementum Bombycis to Synthesize Silicon–Carbon Composites as Anode Materials for Li-Ion Batteries
Silicon-based photovoltaic technology is helpful in reducing the cost of power generation; however, it suffers from economic losses and environmental pollution caused by silicon cutting waste. Herein, a hydrothermal method accompanied by heat treatment is proposed to take full advantage of the photovoltaic silicon cutting waste and biomass excrementum bombycis to fabricate flake-like porous Si@C (FP-Si@C) composite anodes for lithium-ion batteries (LIBs). The resulting FP-Si@C composite with a meso-macroporous structure can buffer the severe volume changes and facilitate electrolyte penetration. Meanwhile, the slightly graphitic carbon with high electrical conductivity and mechanical strength tightly surrounds the Si nanoflakes, which not only contributes to the ion/electron transport but also maintains the electrode structural integrity during the repeated lithiation/delithiation process. Accordingly, the synergistic effect of the unique structure of FP-Si@C composite contributes to a high discharge specific capacity of 1322 mAh g−1 at 0.1 A g−1, superior cycle stability with a capacity retention of 70.8% after 100 cycles, and excellent rate performance with a reversible capacity of 406 mAh g−1 at 1.0 A g−1. This work provides an easy and cost-effective approach to achieving the high-value application of photovoltaic silicon cutting waste, as well as obtaining high-performance Si-based anodes for LIBs.
- 21 August 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (16) , 2875
Open AccessHigh-Value Utilization of Silicon Cutting Waste and Excrementum Bombycis to Synthesize Silicon–Carbon Composites as Anode Materials for Li-Ion Batteries
Silicon-based photovoltaic technology is helpful in reducing the cost of power generation; however, it suffers from economic losses and environmental pollution caused by silicon cutting waste. Herein, a hydrothermal method accompanied by heat treatment is proposed to take full advantage of the photovoltaic silicon cutting waste and biomass excrementum bombycis to fabricate flake-like porous Si@C (FP-Si@C) composite anodes for lithium-ion batteries (LIBs). The resulting FP-Si@C composite with a meso-macroporous structure can buffer the severe volume changes and facilitate electrolyte penetration. Meanwhile, the slightly graphitic carbon with high electrical conductivity and mechanical strength tightly surrounds the Si nanoflakes, which not only contributes to the ion/electron transport but also maintains the electrode structural integrity during the repeated lithiation/delithiation process. Accordingly, the synergistic effect of the unique structure of FP-Si@C composite contributes to a high discharge specific capacity of 1322 mAh g−1 at 0.1 A g−1, superior cycle stability with a capacity retention of 70.8% after 100 cycles, and excellent rate performance with a reversible capacity of 406 mAh g−1 at 1.0 A g−1. This work provides an easy and cost-effective approach to achieving the high-value application of photovoltaic silicon cutting waste, as well as obtaining high-performance Si-based anodes for LIBs.