Golnaz Taghavi Pourian Azar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Golnaz Taghavi Pourian Azar has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Mustafa Ürgen
Metallurgical and Materials Engineering Department, Istanbul Technical University, 34469 Maslak, Istanbul, Turkey
6 shared publications - Andrew J. Cobley
Coventry University
3 shared publications - Hamid Reza Rezaie
School of Metallurgical and Materials Engineering, Iran University of Science & Technology (IUST), Tehran, Iran
3 shared publications Dilan Er
2 shared publicationsH. Razavizadeh
2 shared publications- Latha Krishnan
Functional Materials and Chemistry Research Group, Department of Engineering, Environment and Computing, Coventry University, Coventry CV1 5FB, UK
2 shared publications
Latest Publications
- Open Access
Surface Defect Mitigation of Additively Manufactured Parts Using Surfactant-Mediated Electroless Nickel Coatings
The emergence of defects during the early production phases of ferrous-alloy additively manufactured (AM) parts poses a serious threat to their versatility and adversely impacts their overall mechanical performance in industries ranging from aerospace engineering to medicine. Lack of fusion and gas entrapment during the manufacturing stages leads to increased surface roughness and porosities in the finished part. In this study, the efficacy of employing electroless nickel–boron (Ni-B) deposition to fill and level simulated AM defects was evaluated. The approach to levelling was inspired by the electrochemical deposition techniques used to fill vias in the electronics industry that (to some extent) resemble the size and shape of AM-type defects. This work investigated the use of surfactants to attenuate surface roughness in electroless nickel coatings, thereby achieving the preferential inhibition of the coating thickness on the surface and promoting the filling of the simulated defects. A cationic surfactant molecule, CTAB (cetyltrimethyl ammonium bromide), and a nonpolar surfactant, PEG (polyethylene glycol), at different concentrations were tested using a Ni-B electrolyte for the levelling study. It was found that the use of electroless Ni-B to fill simulated defects on ferrous alloys was strongly influenced by the concentration and nature of the surfactant. The highest levelling percentages were obtained for the heavy-molecular-weight PEG-mediated coatings at 1.2 g/L. The results suggest that electroless Ni-B deposition could be a novel and facile approach to filling defects in ferrous-based AM parts.
Open AccessSurface Defect Mitigation of Additively Manufactured Parts Using Surfactant-Mediated Electroless Nickel Coatings
The emergence of defects during the early production phases of ferrous-alloy additively manufactured (AM) parts poses a serious threat to their versatility and adversely impacts their overall mechanical performance in industries ranging from aerospace engineering to medicine. Lack of fusion and gas entrapment during the manufacturing stages leads to increased surface roughness and porosities in the finished part. In this study, the efficacy of employing electroless nickel–boron (Ni-B) deposition to fill and level simulated AM defects was evaluated. The approach to levelling was inspired by the electrochemical deposition techniques used to fill vias in the electronics industry that (to some extent) resemble the size and shape of AM-type defects. This work investigated the use of surfactants to attenuate surface roughness in electroless nickel coatings, thereby achieving the preferential inhibition of the coating thickness on the surface and promoting the filling of the simulated defects. A cationic surfactant molecule, CTAB (cetyltrimethyl ammonium bromide), and a nonpolar surfactant, PEG (polyethylene glycol), at different concentrations were tested using a Ni-B electrolyte for the levelling study. It was found that the use of electroless Ni-B to fill simulated defects on ferrous alloys was strongly influenced by the concentration and nature of the surfactant. The highest levelling percentages were obtained for the heavy-molecular-weight PEG-mediated coatings at 1.2 g/L. The results suggest that electroless Ni-B deposition could be a novel and facile approach to filling defects in ferrous-based AM parts.
- Open Access
Selective Electroless Copper Plating of Ink-Jet Printed Textiles Using a Copper-Silver Nanoparticle Catalyst
The electroless copper plating of textiles, which have been previously printed with a catalyst, is a promising method to selectively metallise them to produce high-reliability e-textiles, sensors and wearable electronics with wide-ranging applications in high-value sectors such as healthcare, sport, and the military. In this study, polyester textiles were ink-jet printed using differing numbers of printing cycles and printing directions with a functionalised copper–silver nanoparticle catalyst, followed by electroless copper plating. The catalyst was characterised using Transmission Electron Microscopy (TEM) and Ultraviolet/Visible (UV/Vis) spectroscopy. The electroless copper coatings were characterised by copper mass gain, visual appearance and electrical resistance in addition to their morphology and the plating coverage of the fibres using Scanning Electron Microscopy (SEM). Stiffness, laundering durability and colour fastness of the textiles were also analysed using a stiffness tester and Launder Ometer, respectively. The results indicated that in order to provide a metallised pattern with the desired conductivity, stiffness and laundering durability for e-textiles, the printing design, printing direction and the number of printing cycles of the catalyst should be carefully optimised considering the textile’s structure. Achieving a highly conductive complete copper coating, together with an almost identical and sufficiently low stiffness on both sides of the textile can be considered as useful indicators to judge the suitability of the process.
Open AccessSelective Electroless Copper Plating of Ink-Jet Printed Textiles Using a Copper-Silver Nanoparticle Catalyst
The electroless copper plating of textiles, which have been previously printed with a catalyst, is a promising method to selectively metallise them to produce high-reliability e-textiles, sensors and wearable electronics with wide-ranging applications in high-value sectors such as healthcare, sport, and the military. In this study, polyester textiles were ink-jet printed using differing numbers of printing cycles and printing directions with a functionalised copper–silver nanoparticle catalyst, followed by electroless copper plating. The catalyst was characterised using Transmission Electron Microscopy (TEM) and Ultraviolet/Visible (UV/Vis) spectroscopy. The electroless copper coatings were characterised by copper mass gain, visual appearance and electrical resistance in addition to their morphology and the plating coverage of the fibres using Scanning Electron Microscopy (SEM). Stiffness, laundering durability and colour fastness of the textiles were also analysed using a stiffness tester and Launder Ometer, respectively. The results indicated that in order to provide a metallised pattern with the desired conductivity, stiffness and laundering durability for e-textiles, the printing design, printing direction and the number of printing cycles of the catalyst should be carefully optimised considering the textile’s structure. Achieving a highly conductive complete copper coating, together with an almost identical and sufficiently low stiffness on both sides of the textile can be considered as useful indicators to judge the suitability of the process.
- 1 August 2020
- Published by Elsevier in Surface and Coatings Technology
- Vol. 396
Functionalised copper nanoparticle catalysts for electroless copper plating on textiles
- 1 August 2020
- Published by Elsevier in Surface and Coatings Technology
- Vol. 396
Functionalised copper nanoparticle catalysts for electroless copper plating on textiles
- 1 September 2018
- Published by Elsevier in Surface and Coatings Technology
- Vol. 350, 1050-1057
The role of superimposing pulse bias voltage on DC bias on the macroparticle attachment and structure of TiAlN coatings produced with CA-PVD
- 1 September 2018
- Published by Elsevier in Surface and Coatings Technology
- Vol. 350, 1050-1057
The role of superimposing pulse bias voltage on DC bias on the macroparticle attachment and structure of TiAlN coatings produced with CA-PVD
- 29 August 2018
- Published by SAGE Publications in Surface Engineering
- Vol. 36 (1) , 13-21
Effect of high-voltage pulse bias on the stress and morphology of CA-PVD TiN coatings
We investigated the role of high-voltage pulse bias (HVPB) on the structure, morphology and residual stress of TiN coatings produced with cathodic arc physical vapour deposition and compared them with the ones produced with DC bias. Annealing heat treatment was also performed for surveying stress-relieving behaviour within the coatings. The preferred orientation of the coatings changed from (111) to (220) by the application of HVPB. Coatings produced with DC bias exhibited Zone T structure, while the growth morphologies of the coatings produced with HVPB were very similar to the structures in the beginning of Zone II. The presence of Ar in the deposition environment increased the residual stress of all coatings. Intra-grain stresses of the coatings produced with DC bias were almost totally annihilated by annealing. However, for coatings produced with HVPB, stress relief magnitudes were very low, indicating that intra-grain defects could not be totally annihilated.
- 29 August 2018
- Published by SAGE Publications in Surface Engineering
- Vol. 36 (1) , 13-21
Effect of high-voltage pulse bias on the stress and morphology of CA-PVD TiN coatings
We investigated the role of high-voltage pulse bias (HVPB) on the structure, morphology and residual stress of TiN coatings produced with cathodic arc physical vapour deposition and compared them with the ones produced with DC bias. Annealing heat treatment was also performed for surveying stress-relieving behaviour within the coatings. The preferred orientation of the coatings changed from (111) to (220) by the application of HVPB. Coatings produced with DC bias exhibited Zone T structure, while the growth morphologies of the coatings produced with HVPB were very similar to the structures in the beginning of Zone II. The presence of Ar in the deposition environment increased the residual stress of all coatings. Intra-grain stresses of the coatings produced with DC bias were almost totally annihilated by annealing. However, for coatings produced with HVPB, stress relief magnitudes were very low, indicating that intra-grain defects could not be totally annihilated.
- 1 July 2018
- Published by Elsevier in Surface and Coatings Technology
- Vol. 346, 1-8
The corrosion protection ability of TiAlN coatings produced with CA-PVD under superimposed pulse bias
- 1 July 2018
- Published by Elsevier in Surface and Coatings Technology
- Vol. 346, 1-8
The corrosion protection ability of TiAlN coatings produced with CA-PVD under superimposed pulse bias
- 1 November 2017
- Published by Elsevier in Thin Solid Films
- Vol. 642, 207-213
Experimental and modeling study on the role of Ar addition to the working gas on the development of intrinsic stress in TiN coatings produced by filtered vacuum-arc plasma
- 1 November 2017
- Published by Elsevier in Thin Solid Films
- Vol. 642, 207-213
Experimental and modeling study on the role of Ar addition to the working gas on the development of intrinsic stress in TiN coatings produced by filtered vacuum-arc plasma
- 1 September 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 01FNC15-1
Structure and properties of Ti-Al-Y-N coatings deposited from filtered cathodic-arc plasma in gas Ar and N2 mixture
The results of studies of the structure and stress state of Ti-Al-Y-N coatings deposited by the PIII & D method from a filtered vacuum arc plasma under conditions of supplying a pulsed substrate bias potential at an amplitude of 1.5 kV are presented. X-ray diffraction analysis was used to study the influence of argon additives in the range of 0 to 30% to nitrogen on the characteristics of coatings. It is established that, regardless of the argon concentration in the gas mixture, the coatings have nearly close elemental composition and a nanocrystalline structure of the cubic solid solution (Ti, Al)N (structural type NaCl) with a biaxial texture [110] and [100]. As the argon content increases, the columnar microstructure and the size of the nitride crystallites in the coatings are retained, the level of compressive stresses changes nonmonotonically in the range of 6-8 GPa, and the hardness of the coatings remains at a high level of 32-34 GPa.
- 1 September 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 01FNC15-1
Structure and properties of Ti-Al-Y-N coatings deposited from filtered cathodic-arc plasma in gas Ar and N2 mixture
The results of studies of the structure and stress state of Ti-Al-Y-N coatings deposited by the PIII & D method from a filtered vacuum arc plasma under conditions of supplying a pulsed substrate bias potential at an amplitude of 1.5 kV are presented. X-ray diffraction analysis was used to study the influence of argon additives in the range of 0 to 30% to nitrogen on the characteristics of coatings. It is established that, regardless of the argon concentration in the gas mixture, the coatings have nearly close elemental composition and a nanocrystalline structure of the cubic solid solution (Ti, Al)N (structural type NaCl) with a biaxial texture [110] and [100]. As the argon content increases, the columnar microstructure and the size of the nitride crystallites in the coatings are retained, the level of compressive stresses changes nonmonotonically in the range of 6-8 GPa, and the hardness of the coatings remains at a high level of 32-34 GPa.
- 1 August 2017
- Published by Elsevier in Surface and Coatings Technology
- Vol. 322, 211-217
The role of droplets on the cavitation erosion damage of TiN coatings produced with cathodic arc physical vapor deposition
- 1 August 2017
- Published by Elsevier in Surface and Coatings Technology
- Vol. 322, 211-217
The role of droplets on the cavitation erosion damage of TiN coatings produced with cathodic arc physical vapor deposition