AMAlison H. McCarthy

Alison H. McCarthy

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Alison H. McCarthy has a total of 94 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Diagnosing Degradation Pathways of Li-Ion 18650s through a Coupled Thermal-Structural-Electrochemical Approach

    by Patrick J West, Louis Vincent Morris, Dillon Hayman, Jacob Knuerr, Alison H. McCarthy, Marm Dixit, Mahalingam Balasubramanian, Todd A. Kingston, Victoria Cooley, Jun-Sang Park, et al.

    In contrast to the extreme cycling conditions required for accelerated aging studies, most commercial 18650s experience mild cycling over their lifetime. To understand how cells’ operational thermal stability changes after mild C-rate cycling, thermal, crystallographic, and electrochemical characterization approaches were combined and applied to LiNixCoyAlzO2/Graphite+Si 18650s that were cycled at C/3 until 70% remaining useful life (>1000 cycles). Contrary to the idea that lower capacity cells generate less heat, the aged cells showed an increase in both instantaneous heat generation (as confirmed by isothermal calorimetry) and temperature (as confirmed by adiabatic calorimetry) during galvanostatic operation. Heat generation was accurately modeled using a two-component reconstruction of reversible heating and joule heating components, measured from entropic potential testing, akin to a temperature-modulated galvanostatic intermittent titration technique experiment. At the same time, entropic potential testing enabled the deconvolution of thermodynamic and kinetic components of heat. Changes in the thermodynamic component (reversible heat generation) directly correlated with crystallographic heterogeneity, as tracked via synchrotron-based in-situ x-ray diffraction (XRD) mapping, suggesting diminished redox activity and a loss of lithium inventory. Changes in the kinetic component (Joule heating) correlated to increased overpotential and internal resistance and jelly roll collapse. This study places the two-component reconstruction and entropic potential testing in conversation with structural (XRD) and electrochemical (dQ/dV) approaches as a key degradation detection technique for the separation of thermodynamic and kinetic factors.

  • Thick Carbon Nanofoam Designs for High Areal Loadings in Lithium-Sulfur Batteries

    by Alison H. McCarthy, Zachary G Neale, Jeffrey W. Long, Megan B. Sassin, Rachel Carter

    Li-S battery systems are promising alternatives to traditional lithium-ion batteries by enabling an increase in deliverable capacities by an order of magnitude without needing expensive or exotic materials. Unfortunately, sulfur cathodes are challenged by poor electronic conductivity and the redox shuttling of soluble polysulfide intermediates, resulting in capacity fade, inhibiting commercial development of these systems. These challenges are especially exacerbated when trying to scale up the electrodes to practical areal and volumetric capacities. To overcome these known weaknesses, our work utilizes highly scalable porous carbon nanofoam papers (CNFPs) developed at the U.S. Naval Research Laboratory (NRL) with tunable porosity and pore size. Sulfur is deposited onto the CNFP framework via a simple vapor deposition technique to ensure a uniform distribution of sulfur within the free-standing electrodes, aiding both ionic and electronic transport.1 With tunable properties like pore size and sulfur loading, the CNFP electrodes can be optimized to maximize desirable electrochemical results like utilization and areal capacity. Moreover, we demonstrate that the CNFPs can access thicknesses beyond conventional slurry casting (>100 µm) using multi-ply configurations. Herein we highlight these configurations, as well as pouch cell level prototype demonstrations. Neale, Z.G.; Lefler, M.J.; Long, J.W.; Rolison, D.R.; Sassin, M.B.; Carter, R.; Freestanding Carbon Nanofoam Papers with Tunable Porosity as Lithium-Sulfur Battery Cathodes. Nanoscale, 2023, 15, 16924-16932. DISTRIBUTION STATEMENT A. Approved for public release: distribution is unlimited.

  • (Invited) Synchrotron X-Ray Nano-Tomography and Multimodal Studies of Li-Ion Batteries

    by Cheng-Hung Lin, Xiaoyin Zheng, Lei Wang, Zhengyu Ju, Lisa M. Housel, Alison H. McCarthy, Mallory Vila, Xiao Zhang, Steven T. King, Nicole Zmich, et al.

    As batteries revolutionize all technological areas – from miniaturized electronic devices to electric vehicles and to large-scale energy storage, understanding the complex morphological, chemical and structural evolution and their interplays has been at the forefront of the research. Synchrotron X-ray characterization techniques provide insights into the electrochemical reactions and multiscale, multiphysics environments to address the fundamental mechanisms in these systems. The presentation will highlight the application of synchrotron X-ray analysis in two Li-ion battery systems, including both aqueous and non-aqueous systems. X-ray nano-tomography via transmission X-ray microscopy and spectroscopic imaging, complemented by other diffraction, spectroscopy and microscopy techniques, will be discussed. We will present how synchrotron X-ray nano-tomography and quantitative 3D morphological analysis were instrumental in revealing the dimensionality effect of conductive carbon fillers in LiNi 1/3Mn1/3Co1/3O2 (NMC111) cathode [1]. Additionally, we will discuss how a multimodal characterization approach offered insights when probing kinetics of water-in-salt aqueous batteries with thick, porous LiV3O8-LiMn2O4 electrodes [2, 3]. Through the morphological and chemical analyses, the work aims to facilitate the design of future advanced energy storage materials, as well as provide a novel characterization framework for studying a wider range of electrochemical systems. References: [1] "Dimensionality effect of conductive carbon fillers in LiNi 1/3Mn 1/3Co 1/3O 2 cathode", Cheng-Hung Lin, Zhengyu Ju, Xiaoyin Zheng, Xiao Zhang, Nicole Zmich, Xiaoyang Liu, Kenneth J. Takeuchi, Amy C.Marschilok, Esther S.Takeuchi, Mingyuan Ge, Guihua Yu, Yu-chen Karen Chen-Wiegart, Carbon (2021), DOI: https://doi.org/10.1016/j.carbon.2021.11.014 [2] "Probing Kinetics of Water-in-Salt Aqueous Batteries with Thick Porous Electrodes", Cheng-Hung Lin, Lei Wang, Steven T. King, Jianming Bai, Lisa M. Housel, Alison H. McCarthy, Mallory N. Vila, Hengwei Zhu, Chonghang Zhao, Lijie Zou, Sanjit Ghose, Xianghui Xiao, Wah-Keat Lee, Kenneth J. Takeuchi, Amy C. Marschilok, Esther S. Takeuchi, Mingyuan Ge, and Yu-chen Karen Chen-Wiegart, ACS Central Science (2021), DOI: 10.1021/acscentsci.1c00878 [3] "Systems-Level Investigation of Aqueous Batteries for Understanding the Benefit of Water-In-Salt Electrolyte by Synchrotron Nano-Imaging", Cheng-Hung Lin, Ke Sun, Mingyuan Ge, Lisa Housel, Alison McCarthy, Mallory Vila, Chonghang Zhao, Xianghui Xiao, Wah-Keat Lee, Kenneth J. Takeuchi, Esther S. Takeuchi, Amy C. Marschilok, Yu-chen Karen Chen-Wiegart, Science Advances (2020), DOI: 10.1126/sciadv.aay7129

  • Open Access

    Progress Towards Extended Cycle Life Si-based Anodes: Investigation of Fluorinated Local High Concentration Electrolytes

    by Diana M. Lutz, Alison H. McCarthy, Steven T. King, Gurpreet Singh, Chavis A. Stackhouse, Lei Wang, Calvin D. Quilty, Edelmy Marin Bernardez, Killian R. Tallman, Xiao Tong, et al.

    Silicon (Si) anodes are promising candidates for Li-ion batteries due to their high specific capacity and low operating potential. Implementation has been challenged by the significant Si volume changes during (de)lithiation and associated growth/regrowth of the solid electrolyte interphase (SEI). In this report, fluorinated local high concentration electrolytes (FLHCEs) were designed such that each component of the electrolyte (solvent, salt, diluent) is fluorinated to modify the chemistry and stabilize the SEI of high (30%) silicon content anodes. FLHCEs were formulated to probe the electrolyte salt concentration and ratio of the fluorinated carbonate solvents to a hydrofluoroether diluent. Higher salt concentrations led to higher viscosities, conductivities, and contact angles on polyethylene separators. Electrochemical cycling of Si-graphite/NMC622 pouch cells using the FLHCEs delivered up to 67% capacity retention after 100 cycles at a C/3 rate. Post-cycling X-ray photoelectron spectroscopy (XPS) analyses of the Si-graphite anodes indicated the FLHCEs formed a LiF rich solid electrolyte interphase (SEI). The findings show that the fluorinated local high concentration electrolytes contribute to stabilizing the Si-graphite electrode over extended cycling.


  • Open Access

    Quantifying Uncertainty in Tortuosity Estimates for Porous Electrodes

    by Karthik S. Mayilvahanan, Zeyu Hui, Kedi Hu, Jason Kuang, Alison H. McCarthy, John Bernard, Lei Wang, Kenneth J. Takeuchi, Amy C. Marschilok, Esther S. Takeuchi, et al.

    Measuring tortuosity in porous electrodes is important for understanding rate capability and optimizing design. Here, we describe an approach to determine electrode tortuosities and quantify the associated uncertainties by fitting a P2D model to discharge profiles from a standard rate capability test. A dimensionless current is identified as a design-of-experiment parameter that can be used to identify experiments that return confident estimates of tortuosity, even when other model parameters are not known with certainty. This approach is applied to analysis of L i x V 3 O 8 (LVO) electrodes and L i x N i 0.33 M n 0.33 C o 0.33 O 2 (NMC) electrodes. The details of the assumptions made in these measurements and their impact on the reported uncertainties are discussed. We also perform an uncertainty analysis on the standard method for quantifying tortuosity in the literature: electrochemical impedance spectroscopy collected under blocking electrolyte conditions. We find that confident estimates can be obtained using this approach even when uncertainties in equivalent circuit model parameters are considered.


  • Investigating the Phase Transition of VO2(M) to VO2(R) Via Lithium-Ion Electrochemistry

    by Lisa M. Housel, Calvin Quilty, Alyson Abraham, Christopher Tang, Alison H. McCarthy, Genesis Renderos, Ping Liu, Esther S. Takeuchi, Amy C. Marschilok, Kenneth J. Takeuchi

    Vanadium dioxides exist as different polymorphs, each with unique electrochemical properties. Herein, we investigate the monoclinic to rutile transition of vanadium dioxide using different temperatures. The transition from monoclinic to rutile is characterized using synchrotron-based X-ray diffraction and electrochemical performance is performed using electrochemical impedance spectroscopy and intermittent pulsatile galvanostatic discharge tests in a lithium-ion environment. The experimental results indicate a decrease in ohmic resistance when lithium-ion cells are tested at higher temperatures. Density functional theory calculations also identified a possible LixVO2(M) to LixVO2(R) phase transition during the discharging process. Since the monoclinic to rutile transition corresponds to an increase of electrical conductivity by 2 orders of magnitude this can favorably impact the function of a lithium-based electrochemical cell.

  • Full Utilization of Lithium Trivandate (Li1.1V3O8) in Thick Porous Electrodes with High Rate Capacity upon Extended Cycling Elucidated Via Operando Energy Dispersive X-Ray Diffraction

    by Alison H. McCarthy, Karthik Mayilvahanan, Mikaela R. Dunkin, Steven T. King, Calvin Quilty, Lisa M. Housel, Jason Kuang, Kenneth J. Takeuchi, Esther S. Takeuchi, Alan C. West, et al.

    Newer, more demanding energy storage systems require high energy density along with high power and fast charge rates. Conventional battery electrode fabrication techniques are often limited by how much active material they can hold in the case of slurry-cast electrodes and how much of the electrode can be utilized in the case of dense pelletized electrodes. Thick porous electrode fabrication techniques have been developed as a way to obtain a higher active mass loading and an architecture which enables ionic and electronic transport. The homogeneity of the phase distribution of lithiated LVO in thick (∼500 μm) porous electrodes (TPEs) designed to facilitate both ion and electron transport was determined using synchrotron-based operando energy dispersive X-ray diffraction (EDXRD). Probing 3 positions in the TPE while cycling at a fast rate of 1C revealed a homogeneous phase transition across the thickness of the electrode at the 1st and 95th cycles. Continuum modelling indicated homogenous lithiation across the electrode upon discharge at 1C consistent with the EDXRD results and ascribed decreasing accessible active material to be the cause of loss in delivered capacity between the 1st and 95th cycles. The model was supported by the observation of significant particle fracture by SEM consistent with loss of electrical contact. The absence of the beta phase peaks in the EDXRD over extended cycling are consistent with electrochemical accessibility of only part of the active material. Overall, the combination of operando EDXRD, continuum modeling, and ex situ measurements enabled a deeper understanding of lithium vanadium oxide transport properties under high rate extended cycling within a thick highly porous electrode architecture.

  • Open Access

    Understanding Evolution of Lithium Trivanadate Cathodes During Cycling via Reformulated Physics-Based Models and Experiments

    by K. S. Mayilvahanan, J. Kuang, A. H. McCarthy, L. Wang, K. J. Takeuchi, A. M. Marschilok, E. S. Takeuchi, A. C. West

    Degradation of lithium trivanadate (Li x V 3 O 8) cathodes has been widely reported in the literature, but studies have offered little insight towards developing a detailed understanding of the evolution of the active material, and have been inconclusive as to the root cause of degradation. Here, we refit a validated physics-based model to discharge curves over the course of cycling at C/5, and use the evolution of the model parameters to track evolution of the cathode. A regularization penalty for adjusting model parameters from the validated model is introduced as a framework to identify which model parameters can explain a significant portion of the observed change in the voltage profile over the course of cycling. SEM reveals that lithium trivandate particles fracture upon cycling at C/5, consistent with the results of the parameter estimation, deactivation of lithium trivanadate and faster diffusion of lithium within the active particles. The physics-based model is then used to design modified cycling protocols which identify the phase transformation during discharge of lithium trivanadate as the driver of the particle fracture and capacity fade.


  • (De)lithiation of spinel ferrites Fe3O4, MgFe2O4, and ZnFe2O4: a combined spectroscopic, diffraction and theory study

    by David C. Bock, Killian R. Tallman, Haoyue Guo, Calvin Quilty, Shan Yan, Paul F. Smith, Bingjie Zhang, Diana M. Lutz, Alison H. McCarthy, Matthew M. Huie, et al.

    Combined X-ray absorption spectroscopy, synchrotron X-ray diffraction, and density functional theory elucidate (de)lithiation mechanisms for the spinel ferrites MFe2O4 (M = Fe2+, Mg2+, Zn2+).


  • Improved Capacity Retention of Lithium Ion Batteries under Fast Charge via Metal-Coated Graphite Electrodes

    by Killian R. Tallman, Shan Yan, Calvin D. Quilty, Alyson Abraham, Alison H. McCarthy, Amy C. Marschilok, Kenneth J. Takeuchi, Esther S. Takeuchi, David C. Bock

    A primary barrier preventing repetitive fast charging of Li-ion batteries is lithium metal plating at the graphite anode. One approach toward mitigating Li metal deposition is the deliberate modification of the graphite anode surface with materials demonstrating high overpotentials unfavorable for Li metal nucleation, such as Ni or Cu nanoscale films. This research explores Ni and Cu surface coatings at different areal loadings (3 or 11 μ g cm −2 ) on the electrochemistry of graphite/LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) type Li-ion batteries. Extended galvanostatic cycling of control and metal-coated electrodes in graphite/NMC622 pouch cells are conducted under high rate conditions. Based on the overpotential of Li deposition on metal foil, both Ni and Cu treatments were anticipated to result in reduced lithium deposition. The higher metal film loadings of 11 μ g cm −2 Ni- or Cu-coated electrodes exhibit the highest capacity retention after 500 cycles, with mean improvements of 8% and 9%, respectively, over uncoated graphite electrodes. Li plating quantified by X-ray diffraction indicates that the metal films effectively reduce the quantity of plated Li compared to untreated electrodes, with 11 μ g cm −2 Cu providing the greatest benefit.