Anton Friedl
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Anton Friedl has a total of 109 co-authors. Here are the top co-authors by number of shared publications:
- Sebastian Serna-Loaiza
Circular Bioeconomy and Biorefineries Research Group, Institute of Chemical, Environmental and Bioscience Engineering, TU Wien, 1060 Vienna, Austria
11 shared publications - Stefan Beisl
Lignovations GmbH, 3400 Klosterneuburg, Austria
10 shared publications - Angela Miltner
Institute of Chemical, Environmental and Bioscience Engineering, TU Wien, 1060 Vienna, Austria
8 shared publications - Johannes Adamcyk
Institute of Chemical, Environmental and Bioscience Engineering, TU Wien, 1060 Vienna, Austria
5 shared publications - Laura Daza-Serna
Christian Doppler Laboratory for Optimized Expression of Carbohydrate-Active Enzymes. Institute of Chemical, Environmental and Bioscience Engineering, TU Wien, 1060 Vienna, Austria
4 shared publications - Michael Harasek
Institute of Chemical, Environmental & Bioscience Engineering, TU Wien, Getreidemarkt 9/166, 1060 Vienna, Austria
4 shared publications
Latest Publications
- Open Access
Wheat Straw Lignin Nanoparticles as Active Filler in Thermoplastic Starch Films
Starch and lignin are promising biopolymers for the production of biodegradable biocomposite materials. The possibility of processing starch into thermoplastic materials qualifies it as a starting material for the preparation of thermoplastic packaging films, and the combination with lignin can even out some inherent weak points of starch, such as moisture and water sensitivity, and can add additional features like antioxidant activity. Lignins from herbaceous biomass carry building blocks that are not found in wood lignins and are known for their bioactivity, such as p-coumaric acid or ferulic acid. In this work, a protocol was developed to initially prepare hybrids of wheat starch granules and lignin nanoparticles, which were then plasticized using glycerol in an extrusion process to produce thin films. The lignin-containing thermoplastic starch films showed higher Young’s moduli and less elongation at break compared to neat thermoplastic starch films, while tensile strength remained at the level of the neat films. Thermal stability was slightly increased by lignin addition, and oxygen transmission rates were low for lignin contents as low as 1 wt%. The hydrophobicity of the lignin-containing films increased strongly, and they showed an elevated antioxidant activity over several hours, which was also maintained after 24 h. The preparation of hybrid wheat starch lignin particles was successfully tested for the extrusion of thermoplastic starch films with improved thermomechanical properties, decreased water sensitivity, and prolonged antioxidant activity.
Open AccessWheat Straw Lignin Nanoparticles as Active Filler in Thermoplastic Starch Films
Starch and lignin are promising biopolymers for the production of biodegradable biocomposite materials. The possibility of processing starch into thermoplastic materials qualifies it as a starting material for the preparation of thermoplastic packaging films, and the combination with lignin can even out some inherent weak points of starch, such as moisture and water sensitivity, and can add additional features like antioxidant activity. Lignins from herbaceous biomass carry building blocks that are not found in wood lignins and are known for their bioactivity, such as p-coumaric acid or ferulic acid. In this work, a protocol was developed to initially prepare hybrids of wheat starch granules and lignin nanoparticles, which were then plasticized using glycerol in an extrusion process to produce thin films. The lignin-containing thermoplastic starch films showed higher Young’s moduli and less elongation at break compared to neat thermoplastic starch films, while tensile strength remained at the level of the neat films. Thermal stability was slightly increased by lignin addition, and oxygen transmission rates were low for lignin contents as low as 1 wt%. The hydrophobicity of the lignin-containing films increased strongly, and they showed an elevated antioxidant activity over several hours, which was also maintained after 24 h. The preparation of hybrid wheat starch lignin particles was successfully tested for the extrusion of thermoplastic starch films with improved thermomechanical properties, decreased water sensitivity, and prolonged antioxidant activity.
- Open Access
- 1 January 2025
- Published by Wiley in International Journal of Energy Research
- Vol. 2025 (1)
Modeling and Simulation: Investigation of Vapor‐Liquid Equilibrium of CO 2 Absorption in Aqueous Piperazine Solvent for Application in Biogas Upgradation Using ENRTL Model
One of the primary objectives of biogas refinement is carbon dioxide (CO 2 ) removal. Several studies investigated the effect of piperazine (PZ) in a mixture with other amines; however, its capability has rarely been investigated as a stand‐alone absorbent. In this study, CO 2 solubility equilibrium simulations are performed using the Aspen Plus (v7.3.2, AspenTech) simulation tool for the CO 2 /H 2 O and CO 2 /H 2 O/aqueous PZ component systems to predict the CO 2 absorption rate and absorption capacity of the solvent. CO 2 equilibrium partial pressures (up to120 kPa) were calculated using electrolyte non‐random two liquid (ENRTL) model with a full explanation of crucial dissociation representing the complicated electrolyte system based on Henry’s Law. The ENRTL model was used to calculate the activity coefficients in the electrolyte system, while the dissociation and equilibrium constants were implemented as a function of temperature and or obtained from reference state free energy. Aspen Plus calculations from the ENRTL model showed excellent results having less than 4% deviation from the experimental results reported in the published literature. A selected range of 0.1–1.2 m PZ concentration and temperature between 298–343 K was used to estimate CO 2 loadings using the simulations from the validated model. Various concentrations of aqueous PZ were then compared to benchmark solvent, that is, pressurized water for CO 2 absorption loading. The observed result showed that CO 2 absorption at PZ concentration of 0.5 m was 120% higher than the pressurized water solvent at the same temperature and partial pressure conditions. Additionally, the efficiency of CO 2 removal obtained by using PZ was also observed to be higher than pressurized water scrubbing. In short, the obtained encouraging results portrays that PZ may be used as model solvent for CO 2 absorption from biogas and to limit its effect toward global warming.
- 1 January 2025
- Published by Wiley in International Journal of Energy Research
- Vol. 2025 (1)
Open AccessModeling and Simulation: Investigation of Vapor‐Liquid Equilibrium of CO 2 Absorption in Aqueous Piperazine Solvent for Application in Biogas Upgradation Using ENRTL Model
One of the primary objectives of biogas refinement is carbon dioxide (CO 2 ) removal. Several studies investigated the effect of piperazine (PZ) in a mixture with other amines; however, its capability has rarely been investigated as a stand‐alone absorbent. In this study, CO 2 solubility equilibrium simulations are performed using the Aspen Plus (v7.3.2, AspenTech) simulation tool for the CO 2 /H 2 O and CO 2 /H 2 O/aqueous PZ component systems to predict the CO 2 absorption rate and absorption capacity of the solvent. CO 2 equilibrium partial pressures (up to120 kPa) were calculated using electrolyte non‐random two liquid (ENRTL) model with a full explanation of crucial dissociation representing the complicated electrolyte system based on Henry’s Law. The ENRTL model was used to calculate the activity coefficients in the electrolyte system, while the dissociation and equilibrium constants were implemented as a function of temperature and or obtained from reference state free energy. Aspen Plus calculations from the ENRTL model showed excellent results having less than 4% deviation from the experimental results reported in the published literature. A selected range of 0.1–1.2 m PZ concentration and temperature between 298–343 K was used to estimate CO 2 loadings using the simulations from the validated model. Various concentrations of aqueous PZ were then compared to benchmark solvent, that is, pressurized water for CO 2 absorption loading. The observed result showed that CO 2 absorption at PZ concentration of 0.5 m was 120% higher than the pressurized water solvent at the same temperature and partial pressure conditions. Additionally, the efficiency of CO 2 removal obtained by using PZ was also observed to be higher than pressurized water scrubbing. In short, the obtained encouraging results portrays that PZ may be used as model solvent for CO 2 absorption from biogas and to limit its effect toward global warming.
- Open Access
- 18 November 2024
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 63 (47) , 20677-20687
Assessment of the Recovery of Erythritol Using Boronic Acid Polymers
- 18 November 2024
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 63 (47) , 20677-20687
Open AccessAssessment of the Recovery of Erythritol Using Boronic Acid Polymers
- 1 August 2024
- Published by Weston Medical Publishing in Journal of Emergency Management
- Vol. 22 (4) , 389-410
Live agent training as an important process safety measure to strengthen resilience in hazardous (CBRN) work situations
Various occupational groups as well as emergency responders are important human factors in combating incidents and emergencies in a broad range. Negative deviations from a process-safe condition should be detected and transformed into a safer condition to prevent negative consequences. Therefore, training and education of personnel is an important measure in this case as well as a major influencing factor on the vulnerability to errors during operations and their resilience. From lack of training to incorrect execution due to excessive stress, fear, or unfamiliar situations, it is important to counteract this with targeted training under conditions that are as close to reality as reasonably achievable. Realistic training situations involving live agents allow to recognize mistakes or inadequacies not only in personnel but also in material or in mission planning and to create a more effective working environment. Many violations of work guidelines are due to well-intentioned deviations from nonexecutable standard operation procedures that have never been tested. Repeated, progressive training under real hazardous conditions can help to strengthen mission readiness and resilience of teams. It better prepares them for their dangerous activities.
- 1 August 2024
- Published by Weston Medical Publishing in Journal of Emergency Management
- Vol. 22 (4) , 389-410
Live agent training as an important process safety measure to strengthen resilience in hazardous (CBRN) work situations
Various occupational groups as well as emergency responders are important human factors in combating incidents and emergencies in a broad range. Negative deviations from a process-safe condition should be detected and transformed into a safer condition to prevent negative consequences. Therefore, training and education of personnel is an important measure in this case as well as a major influencing factor on the vulnerability to errors during operations and their resilience. From lack of training to incorrect execution due to excessive stress, fear, or unfamiliar situations, it is important to counteract this with targeted training under conditions that are as close to reality as reasonably achievable. Realistic training situations involving live agents allow to recognize mistakes or inadequacies not only in personnel but also in material or in mission planning and to create a more effective working environment. Many violations of work guidelines are due to well-intentioned deviations from nonexecutable standard operation procedures that have never been tested. Repeated, progressive training under real hazardous conditions can help to strengthen mission readiness and resilience of teams. It better prepares them for their dangerous activities.
- Open Access
- 26 April 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (18) , 20444-20453
Exploring Caffeic Acid and Lignosulfonate as Key Phenolic Ligands for Metal-Phenolic Network Assembly
Films formed by metals and phenols through a coordinative interaction have been extensively studied in previous years. We report the successful formation of MPN films from the phenolic compounds caffeic acid and lignosulfonate using Fe3+ ions for complexation. The likewise examined p-coumaryl alcohol showed some MPN film formation tendency, while for coniferyl alcohol and sinapyl alcohol, no successful film buildup could be observed. These newly formed films were compared to tannic acid-Fe3+ films as a reference. Film growth and degradation were tracked by using UV-vis absorption spectroscopy. The films were degradable under different conditions such as alkaline environments or in the presence of a strong chelator. Small hollow capsules with a diameter of 3 μm and thicknesses in the nanometer range were produced. Additionally, the prepared films showed varying colors and levels of wettability. By utilizing the films' coating properties, we successfully dyed human hair in various colors.
- 26 April 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (18) , 20444-20453
Open AccessExploring Caffeic Acid and Lignosulfonate as Key Phenolic Ligands for Metal-Phenolic Network Assembly
Films formed by metals and phenols through a coordinative interaction have been extensively studied in previous years. We report the successful formation of MPN films from the phenolic compounds caffeic acid and lignosulfonate using Fe3+ ions for complexation. The likewise examined p-coumaryl alcohol showed some MPN film formation tendency, while for coniferyl alcohol and sinapyl alcohol, no successful film buildup could be observed. These newly formed films were compared to tannic acid-Fe3+ films as a reference. Film growth and degradation were tracked by using UV-vis absorption spectroscopy. The films were degradable under different conditions such as alkaline environments or in the presence of a strong chelator. Small hollow capsules with a diameter of 3 μm and thicknesses in the nanometer range were produced. Additionally, the prepared films showed varying colors and levels of wettability. By utilizing the films' coating properties, we successfully dyed human hair in various colors.
- Open Access
- 8 November 2023
- Published by Elsevier in Mechanics of Materials
- Vol. 188
The viscoelastic behavior of lignin: Quantification through nanoindentation relaxation testing on hot-pressed technical lignin samples from various origins
- 8 November 2023
- Published by Elsevier in Mechanics of Materials
- Vol. 188
Open AccessThe viscoelastic behavior of lignin: Quantification through nanoindentation relaxation testing on hot-pressed technical lignin samples from various origins
- Open Access
- 8 September 2023
- Published by Springer Nature in Journal of Applied Phycology
- Vol. 35 (6) , 2761-2776
Utilizing straw-derived hemicellulosic hydrolysates by Chlorella vulgaris: Contributing to a biorefinery approach
With the growing human population, greenhouse gases and global temperature are increasing calling for sustainable biorefineries to convert low-value side streams into high-value products. In this study, the remaining hemicellulosic sugary waste fraction of a wheat straw biorefinery approach, without any pretreatment, was applied as a medium supplement for Chlorella vulgaris cultivation. Next to oligomeric and monomeric sugars, the waste stream contained hydrolysis by-products, such as furfural, 5-hydroxymethylfurfural and acetic acid. Despite the presence of these growth inhibitors, C. vulgaris cultivation was possible. Addition of 2.5% (v/v) of wheat straw hydrolysate to BG11-medium boosted chlorophyll content in C. vulgaris by 40% compared to photoautotrophically grown cells solely cultivated on defined media. As of now, this is the highest chlorophyll content obtained from a cultivation of C. vulgaris on a medium supplemented with a waste stream. Overall, our results demonstrate that wheat straw hydrolysate increases chlorophyll biosynthesis, improving the nutritional value of C. vulgaris biomass for food and feed applications. Hence, valorization of this hemicellulosic sugary fraction results in an additional high-valued product contributing towards the wheat straw biorefinery.
- 8 September 2023
- Published by Springer Nature in Journal of Applied Phycology
- Vol. 35 (6) , 2761-2776
Open AccessUtilizing straw-derived hemicellulosic hydrolysates by Chlorella vulgaris: Contributing to a biorefinery approach
With the growing human population, greenhouse gases and global temperature are increasing calling for sustainable biorefineries to convert low-value side streams into high-value products. In this study, the remaining hemicellulosic sugary waste fraction of a wheat straw biorefinery approach, without any pretreatment, was applied as a medium supplement for Chlorella vulgaris cultivation. Next to oligomeric and monomeric sugars, the waste stream contained hydrolysis by-products, such as furfural, 5-hydroxymethylfurfural and acetic acid. Despite the presence of these growth inhibitors, C. vulgaris cultivation was possible. Addition of 2.5% (v/v) of wheat straw hydrolysate to BG11-medium boosted chlorophyll content in C. vulgaris by 40% compared to photoautotrophically grown cells solely cultivated on defined media. As of now, this is the highest chlorophyll content obtained from a cultivation of C. vulgaris on a medium supplemented with a waste stream. Overall, our results demonstrate that wheat straw hydrolysate increases chlorophyll biosynthesis, improving the nutritional value of C. vulgaris biomass for food and feed applications. Hence, valorization of this hemicellulosic sugary fraction results in an additional high-valued product contributing towards the wheat straw biorefinery.
- Open Access
- 17 April 2023
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 13 (18) , 16495-16509
Detoxification strategy of wheat straw hemicellulosic hydrolysate for cultivating Trichoderma reesei: a contribution towards the wheat straw biorefinery
The urgency for reducing the dependence on fossil-based materials is increasing the interest in the utilization of renewable feedstocks. Lignocellulosic residual biomass can be used as feedstock to produce chemicals and energy without generating food security problems. Wheat straw (WS) has a clear potential for developing sustainable processes in a circular bioeconomy context. However, the development of processes requires a strategy for utilizing the hemicellulosic, cellulosic, and lignin fractions. This work covers the utilization of the hemicellulosic fraction as the first stage of a wheat straw biorefinery. The aim was to evaluate the hydrolysis of WS by using liquid hot water (LHW) treatment, the detoxification of the produced wheat straw hydrolysate (WSH), and the cultivation of Trichoderma reesei using it as the only carbon source as proof of detoxification. LHW treatment was performed at 160 °C and 90 min and yielded a WSH rich in monomeric and oligomeric saccharides (~ 14 g/L) and containing degradation products in low concentration (furfural, HMF, and acetic acid). As part of the development of the extraction and detoxification strategy, we determined the specific inhibition thresholds for T. reesei for the mentioned degradation products. Detoxification was carried out by evaporation by modifying the % of volume evaporated and the pH of the solution. Approximately 55.9% of acetic acid and 100% of furfural were removed from the WSH. The fungal biomass obtained in the medium containing WSH was equivalent to 98% of the biomass obtained in the control medium.
- 17 April 2023
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 13 (18) , 16495-16509
Open AccessDetoxification strategy of wheat straw hemicellulosic hydrolysate for cultivating Trichoderma reesei: a contribution towards the wheat straw biorefinery
The urgency for reducing the dependence on fossil-based materials is increasing the interest in the utilization of renewable feedstocks. Lignocellulosic residual biomass can be used as feedstock to produce chemicals and energy without generating food security problems. Wheat straw (WS) has a clear potential for developing sustainable processes in a circular bioeconomy context. However, the development of processes requires a strategy for utilizing the hemicellulosic, cellulosic, and lignin fractions. This work covers the utilization of the hemicellulosic fraction as the first stage of a wheat straw biorefinery. The aim was to evaluate the hydrolysis of WS by using liquid hot water (LHW) treatment, the detoxification of the produced wheat straw hydrolysate (WSH), and the cultivation of Trichoderma reesei using it as the only carbon source as proof of detoxification. LHW treatment was performed at 160 °C and 90 min and yielded a WSH rich in monomeric and oligomeric saccharides (~ 14 g/L) and containing degradation products in low concentration (furfural, HMF, and acetic acid). As part of the development of the extraction and detoxification strategy, we determined the specific inhibition thresholds for T. reesei for the mentioned degradation products. Detoxification was carried out by evaporation by modifying the % of volume evaporated and the pH of the solution. Approximately 55.9% of acetic acid and 100% of furfural were removed from the WSH. The fungal biomass obtained in the medium containing WSH was equivalent to 98% of the biomass obtained in the control medium.
- Open Access
- 21 March 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (6) , 5531
Automation of Life Cycle Assessment—A Critical Review of Developments in the Field of Life Cycle Inventory Analysis
The collection of reliable data is an important and time-consuming part of the life cycle inventory (LCI) phase. Automation of individual steps can help to obtain a higher volume of or more realistic data. The aim of this paper is to survey the current state of automation potential in the scientific literature published between 2008 and 2021, with a focus on LCI in the area of process engineering. The results show that automation was most frequently found in the context of process simulation (via interfaces between software), for LCI database usage (e.g., via using ontologies for linking data) and molecular structure models (via machine learning processes such as artificial neural networks), which were also the categories where the highest level of maturity of the models was reached. No further usage could be observed in the areas of automation techniques for exploiting plant data, scientific literature, process calculation, stoichiometry and proxy data. The open science practice of sharing programming codes, software or other newly created resources was only followed in 20% of cases, uncertainty evaluation was only included in 10 out of 30 papers and only 30% of the developed methods were used in further publication, always including at least one of the first authors. For these reasons, we recommend encouraging exchange in the LCA community and in interdisciplinary settings to foster long-term sustainable development of new automation methodologies supporting data generation.
- 21 March 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (6) , 5531
Open AccessAutomation of Life Cycle Assessment—A Critical Review of Developments in the Field of Life Cycle Inventory Analysis
The collection of reliable data is an important and time-consuming part of the life cycle inventory (LCI) phase. Automation of individual steps can help to obtain a higher volume of or more realistic data. The aim of this paper is to survey the current state of automation potential in the scientific literature published between 2008 and 2021, with a focus on LCI in the area of process engineering. The results show that automation was most frequently found in the context of process simulation (via interfaces between software), for LCI database usage (e.g., via using ontologies for linking data) and molecular structure models (via machine learning processes such as artificial neural networks), which were also the categories where the highest level of maturity of the models was reached. No further usage could be observed in the areas of automation techniques for exploiting plant data, scientific literature, process calculation, stoichiometry and proxy data. The open science practice of sharing programming codes, software or other newly created resources was only followed in 20% of cases, uncertainty evaluation was only included in 10 out of 30 papers and only 30% of the developed methods were used in further publication, always including at least one of the first authors. For these reasons, we recommend encouraging exchange in the LCA community and in interdisciplinary settings to foster long-term sustainable development of new automation methodologies supporting data generation.
- Open Access
- 7 February 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (4) , 3006
High Temperature Lignin Separation for Improved Yields in Ethanol Organosolv Pre-Treatment
The full utilization of renewable raw materials is necessary for a sustainable economy. Lignin is an abundant biopolymer, but is currently mainly used for energy production. Ethanol organosolv pre-treatment produces high-quality lignin, but still faces substantial economic challenges. Lignin solubility increases with temperature, and previous studies have shown that it reprecipitates during cooling after the pre-treatment. Thus, a possibility for the optimization of lignin production with this process can be the separation of extract and residual biomass at high temperatures. In this work, lignin was extracted from wheat straw at 180 °C, and the extract was separated from the remaining solids at several temperatures after the pre-treatment. The results show that 10.1 g/kg of lignin and 2.2 g/kg of carbohydrates are dissolved at the pre-treatment temperature of 180 °C, which is reduced to 8.6 g/kg of lignin and 1.2 g/kg of carbohydrates after cooling. The precipitation of lignin separated from the extracts at 180 °C showed that a higher lignin concentration at high temperatures results in a 46% improvement in the yield of solid lignin, while there was no significant impact on the lignin purity.
- 7 February 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (4) , 3006
Open AccessHigh Temperature Lignin Separation for Improved Yields in Ethanol Organosolv Pre-Treatment
The full utilization of renewable raw materials is necessary for a sustainable economy. Lignin is an abundant biopolymer, but is currently mainly used for energy production. Ethanol organosolv pre-treatment produces high-quality lignin, but still faces substantial economic challenges. Lignin solubility increases with temperature, and previous studies have shown that it reprecipitates during cooling after the pre-treatment. Thus, a possibility for the optimization of lignin production with this process can be the separation of extract and residual biomass at high temperatures. In this work, lignin was extracted from wheat straw at 180 °C, and the extract was separated from the remaining solids at several temperatures after the pre-treatment. The results show that 10.1 g/kg of lignin and 2.2 g/kg of carbohydrates are dissolved at the pre-treatment temperature of 180 °C, which is reduced to 8.6 g/kg of lignin and 1.2 g/kg of carbohydrates after cooling. The precipitation of lignin separated from the extracts at 180 °C showed that a higher lignin concentration at high temperatures results in a 46% improvement in the yield of solid lignin, while there was no significant impact on the lignin purity.