Xin Zeng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xin Zeng has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Xiaoping Xue
College of Electronic and Information Engineering, Tongji University, Shanghai, China
8 shared publications Jingxiao Ma
College of Electronic and Information Engineering, Tongji University, Shanghai, China
5 shared publications- Xuewen Wu
School of Communication Engineering, Hangzhou Dianzi University, Hangzhou, China
5 shared publications Chenwei Gu
College of Telecommunications and Information Engineering, Nanjing University of Posts and Telecommunications, Nanjing, China
4 shared publicationsChangjiang Xiao
2 shared publications- Jingxiao Ma
College of Electronic and Information Engineering, Tongji University, Shanghai, China
2 shared publications
Latest Publications
- Open Access
Joint Beamforming for RIS Aided Full-Duplex Integrated Sensing and Uplink Communication
This paper studies integrated sensing and communication (ISAC) technology in a full-duplex (FD) uplink communication system. As opposed to the half-duplex system, where sensing is conducted in a first-emit-then-listen manner, FD ISAC system emits and listens simultaneously and hence conducts uninterrupted target sensing. Besides, impressed by the recently emerging reconfigurable intelligent surface (RIS) technology, we also employ RIS to improve the self-interference (SI) suppression and signal processing gain. As will be seen, the joint beamforming, RIS configuration and mobile users' power allocation is a difficult optimization problem. To resolve this challenge, via leveraging the cutting-the-edge majorization-minimization (MM) and penalty-dual-decomposition (PDD) methods, we develop an iterative solution that optimizes all variables via using convex optimization techniques. Numerical results demonstrate the effectiveness of our proposed solution and the great benefit of employing RIS in the FD ISAC system.
Open AccessJoint Beamforming for RIS Aided Full-Duplex Integrated Sensing and Uplink Communication
This paper studies integrated sensing and communication (ISAC) technology in a full-duplex (FD) uplink communication system. As opposed to the half-duplex system, where sensing is conducted in a first-emit-then-listen manner, FD ISAC system emits and listens simultaneously and hence conducts uninterrupted target sensing. Besides, impressed by the recently emerging reconfigurable intelligent surface (RIS) technology, we also employ RIS to improve the self-interference (SI) suppression and signal processing gain. As will be seen, the joint beamforming, RIS configuration and mobile users' power allocation is a difficult optimization problem. To resolve this challenge, via leveraging the cutting-the-edge majorization-minimization (MM) and penalty-dual-decomposition (PDD) methods, we develop an iterative solution that optimizes all variables via using convex optimization techniques. Numerical results demonstrate the effectiveness of our proposed solution and the great benefit of employing RIS in the FD ISAC system.
- 7 September 2023
- Published by Elsevier in Digital Signal Processing
- Vol. 142
User fairness-enhanced beamforming for IRS-assisted cognitive radio networks based on prior judgment mechanism
- 7 September 2023
- Published by Elsevier in Digital Signal Processing
- Vol. 142
User fairness-enhanced beamforming for IRS-assisted cognitive radio networks based on prior judgment mechanism
- Open Access
- 6 December 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (23) , 12472
Anomaly Detection and Early Warning Model for Latency in Private 5G Networks
Different from previous generations of communication technology, 5G has tailored several modes especially for industrial applications, such as Ultra-Reliable Low-Latency Communications (URLLC) and Massive Machine Type Communications (mMTC). The industrial private 5G networks require high performance of latency, bandwidth, and reliability, while the deployment environment is usually complicated, causing network problems difficult to identify. This poses a challenge to the operation and maintenance (O&M) of private 5G networks. It is needed to quickly diagnose or predict faults based on high-dimensional data of networks and services to reduce the impact of network faults on services. This paper proposes a ConvAE-Latency model for anomaly detection, which enhances the correlation between target indicators and hidden features by multi-target learning. Meanwhile, transfer learning is applied for anomaly prediction in the proposed LstmAE-TL model to solve the problem of unbalanced samples. Based on the China Telecom data platform, the proposed models are deployed and tested in an Automated Guided Vehicles (AGVs) application scenario. The results have been improved compared to existing research.
- 6 December 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (23) , 12472
Open AccessAnomaly Detection and Early Warning Model for Latency in Private 5G Networks
Different from previous generations of communication technology, 5G has tailored several modes especially for industrial applications, such as Ultra-Reliable Low-Latency Communications (URLLC) and Massive Machine Type Communications (mMTC). The industrial private 5G networks require high performance of latency, bandwidth, and reliability, while the deployment environment is usually complicated, causing network problems difficult to identify. This poses a challenge to the operation and maintenance (O&M) of private 5G networks. It is needed to quickly diagnose or predict faults based on high-dimensional data of networks and services to reduce the impact of network faults on services. This paper proposes a ConvAE-Latency model for anomaly detection, which enhances the correlation between target indicators and hidden features by multi-target learning. Meanwhile, transfer learning is applied for anomaly prediction in the proposed LstmAE-TL model to solve the problem of unbalanced samples. Based on the China Telecom data platform, the proposed models are deployed and tested in an Automated Guided Vehicles (AGVs) application scenario. The results have been improved compared to existing research.
- 8 November 2022
- Published by Elsevier in Applied Energy
- Vol. 329
Transfer learning for multi-objective non-intrusive load monitoring in smart building
- 8 November 2022
- Published by Elsevier in Applied Energy
- Vol. 329
Transfer learning for multi-objective non-intrusive load monitoring in smart building
- Open Access
- 27 August 2022
- Published by Elsevier in Energy Reports
- Vol. 8, 10570-10581
Short-mid term electricity consumption prediction using non-intrusive attention-augmented deep learning model
- 27 August 2022
- Published by Elsevier in Energy Reports
- Vol. 8, 10570-10581
Open AccessShort-mid term electricity consumption prediction using non-intrusive attention-augmented deep learning model
- 18 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 23 (12) , 23906-23918
LSTM-Based Intrusion Detection System for VANETs: A Time Series Classification Approach to False Message Detection
In vehicular ad hoc networks (VANETs), vehicles broadcast emergency messages and beacon messages, which enable drivers to perceive traffic conditions beyond their visual range thus improve driving safety. However, internal attackers can launch a false message attack for selfish purposes by reporting a non-existent traffic incident in emergency messages. Moreover, some collusion attackers may spread bogus beacon messages cooperatively to make the bogus traffic incident more deceptive. To improve the accuracy of false emergency message detection, we propose a novel intrusion detection system (IDS) based on time series classification and deep learning. Considering that traffic parameters are highly correlated with time, we collect time series of traffic parameters closely related to traffic incidents from messages of vehicles near reported traffic incidents as time series feature vectors. To recognize the pattern of traffic parameters changing over time more accurately, a traffic incident classifier based on long short-term memory (LSTM) is designed and trained using time series feature vectors from both normal and collusion attack scenarios. Based on the classification result, the authenticity of the emergency message can be determined. Finally, we evaluate the performance of the proposed LSTM-based IDS through extensive simulation. Simulation results validate that our IDS is more accurate in false message detection compared with some well-known machine learning-based schemes.
- 18 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 23 (12) , 23906-23918
LSTM-Based Intrusion Detection System for VANETs: A Time Series Classification Approach to False Message Detection
In vehicular ad hoc networks (VANETs), vehicles broadcast emergency messages and beacon messages, which enable drivers to perceive traffic conditions beyond their visual range thus improve driving safety. However, internal attackers can launch a false message attack for selfish purposes by reporting a non-existent traffic incident in emergency messages. Moreover, some collusion attackers may spread bogus beacon messages cooperatively to make the bogus traffic incident more deceptive. To improve the accuracy of false emergency message detection, we propose a novel intrusion detection system (IDS) based on time series classification and deep learning. Considering that traffic parameters are highly correlated with time, we collect time series of traffic parameters closely related to traffic incidents from messages of vehicles near reported traffic incidents as time series feature vectors. To recognize the pattern of traffic parameters changing over time more accurately, a traffic incident classifier based on long short-term memory (LSTM) is designed and trained using time series feature vectors from both normal and collusion attack scenarios. Based on the classification result, the authenticity of the emergency message can be determined. Finally, we evaluate the performance of the proposed LSTM-based IDS through extensive simulation. Simulation results validate that our IDS is more accurate in false message detection compared with some well-known machine learning-based schemes.
- 22 June 2022
- Published by Springer Nature in Applied Intelligence
- Vol. 53 (5) , 1-16
Physical-layer secret key generation based on domain-adversarial training of autoencoder for spatial correlated channels
- 22 June 2022
- Published by Springer Nature in Applied Intelligence
- Vol. 53 (5) , 1-16
Physical-layer secret key generation based on domain-adversarial training of autoencoder for spatial correlated channels
- 27 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A Novel Physical Layer Key Generation Method Based on WGAN-GP Adversarial Autoencoder
The reciprocity of wireless channel between legitimate nodes is the premise of physical layer security key generation. Deep neural networks provide the non-linear transformation method to extract symmetric keys from reciprocal channel responses and show better freedom and performance than traditional methods. However, the hidden layer output in neural networks is unpredictable and the extracted high-dimensional features can not be estimated in advance, which is difficult to be applied to the key generation in the physical layer. In this paper, the key generation method based on WGAN-GP adversarial autoencoder is proposed to extract features efficiently between legitimate nodes, and the features can be fitted to the Gaussian distribution. Meanwhile, the Wasserstein distance and gradient penalty are applied in the game training to solve the gradient explosion. Compared with the PCA method, the proposed method has higher security key capacity, lower key error rate, and no interaction in the key generation process, which avoids key leakage.
- 27 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A Novel Physical Layer Key Generation Method Based on WGAN-GP Adversarial Autoencoder
The reciprocity of wireless channel between legitimate nodes is the premise of physical layer security key generation. Deep neural networks provide the non-linear transformation method to extract symmetric keys from reciprocal channel responses and show better freedom and performance than traditional methods. However, the hidden layer output in neural networks is unpredictable and the extracted high-dimensional features can not be estimated in advance, which is difficult to be applied to the key generation in the physical layer. In this paper, the key generation method based on WGAN-GP adversarial autoencoder is proposed to extract features efficiently between legitimate nodes, and the features can be fitted to the Gaussian distribution. Meanwhile, the Wasserstein distance and gradient penalty are applied in the game training to solve the gradient explosion. Compared with the PCA method, the proposed method has higher security key capacity, lower key error rate, and no interaction in the key generation process, which avoids key leakage.
- 3 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 71 (8) , 8441-8456
Robust Secure Transmission Design for IRS-Assisted mmWave Cognitive Radio Networks
Cognitive radio networks (CRNs) and millimeter wave (mmWave) communications are two major technologies to enhance the spectrum efficiency (SE). Considering that the SE improvement in the CRNs is limited due to the interference temperature imposed on the primary user (PU), and the severe path loss and high directivity in mmWave communications make it vulnerable to blockage events, we introduce an intelligent reflecting surface (IRS) into mmWave CRNs. Due to the estimation mismatch and the passivity of Eavesdroppers (Eves), perfect channel state information (CSI) of wiretap links is challenging to obtain, which promotes our research on robust secure beamforming (BF) design in the IRS-assisted mmWave CRNs. This paper considers the collaborate scenario of Eves, which allows us to investigate the BF design in the harsh eavesdropping environment. Specifically, by using a uniform linear array (ULA) at the cognitive base station (CBS) and a uniform planar array (UPA) at the IRS, and supposing that imperfect CSIs of angle-of-departures for wiretap links are known, we formulate a constrained problem to maximize the worst-case achievable secrecy rate (ASR) of the secondary user (SU) by jointly designing the transmit BF at the CBS and reflect BF at the IRS. To solve the non-convex problem with coupled variables, an efficient alternating optimization algorithm is proposed. As for the transmit BF at the CBS, we propose a heuristic robust transmit BF algorithm to attain the BF vectors analytically. As for the reflect BF at the IRS, by means of an auxiliary variable, we transform the non-convex problem into a semi-definite programming problem with rank-1 constraint, which is handled with the help of an iterative penalty function, and then obtain the optimal reflect BF through CVX. Finally, simulation results indicate that the ASR performance of our proposed algorithm has a small gap with that of the optimal solution with perfect CSI compared with the other benchmarks.
- 3 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 71 (8) , 8441-8456
Robust Secure Transmission Design for IRS-Assisted mmWave Cognitive Radio Networks
Cognitive radio networks (CRNs) and millimeter wave (mmWave) communications are two major technologies to enhance the spectrum efficiency (SE). Considering that the SE improvement in the CRNs is limited due to the interference temperature imposed on the primary user (PU), and the severe path loss and high directivity in mmWave communications make it vulnerable to blockage events, we introduce an intelligent reflecting surface (IRS) into mmWave CRNs. Due to the estimation mismatch and the passivity of Eavesdroppers (Eves), perfect channel state information (CSI) of wiretap links is challenging to obtain, which promotes our research on robust secure beamforming (BF) design in the IRS-assisted mmWave CRNs. This paper considers the collaborate scenario of Eves, which allows us to investigate the BF design in the harsh eavesdropping environment. Specifically, by using a uniform linear array (ULA) at the cognitive base station (CBS) and a uniform planar array (UPA) at the IRS, and supposing that imperfect CSIs of angle-of-departures for wiretap links are known, we formulate a constrained problem to maximize the worst-case achievable secrecy rate (ASR) of the secondary user (SU) by jointly designing the transmit BF at the CBS and reflect BF at the IRS. To solve the non-convex problem with coupled variables, an efficient alternating optimization algorithm is proposed. As for the transmit BF at the CBS, we propose a heuristic robust transmit BF algorithm to attain the BF vectors analytically. As for the reflect BF at the IRS, by means of an auxiliary variable, we transform the non-convex problem into a semi-definite programming problem with rank-1 constraint, which is handled with the help of an iterative penalty function, and then obtain the optimal reflect BF through CVX. Finally, simulation results indicate that the ASR performance of our proposed algorithm has a small gap with that of the optimal solution with perfect CSI compared with the other benchmarks.
- Open Access
Robust Secure Transmission Design for IRS-Assisted mmWave Cognitive Radio Networks
Cognitive radio networks (CRNs) and millimeter wave (mmWave) communications are two major technologies to enhance the spectrum efficiency (SE). Considering that the SE improvement in the CRNs is limited due to the interference temperature imposed on the primary user (PU), and the severe path loss and high directivity in mmWave communications make it vulnerable to blockage events, we introduce an intelligent reflecting surface (IRS) into mmWave CRNs. Due to the estimation mismatch and the passivity of Eavesdroppers (Eves), perfect channel state information (CSI) of wiretap links is challenging to obtain, which promotes our research on robust secure beamforming (BF) design in the IRS-assisted mmWave CRNs. This paper considers the collaborate scenario of Eves, which allows us to investigate the BF design in the harsh eavesdropping environment. Specifically, by using a uniform linear array (ULA) at the cognitive base station (CBS) and a uniform planar array (UPA) at the IRS, and supposing that imperfect CSIs of angle-of-departures for wiretap links are known, we formulate a constrained problem to maximize the worst-case achievable secrecy rate (ASR) of the secondary user (SU) by jointly designing the transmit BF at the CBS and reflect BF at the IRS. To solve the non-convex problem with coupled variables, an efficient alternating optimization algorithm is proposed. Finally, simulation results indicate that the ASR performance of our proposed algorithm has a small gap with that of the optimal solution with perfect CSI compared with the other benchmarks.
Open AccessRobust Secure Transmission Design for IRS-Assisted mmWave Cognitive Radio Networks
Cognitive radio networks (CRNs) and millimeter wave (mmWave) communications are two major technologies to enhance the spectrum efficiency (SE). Considering that the SE improvement in the CRNs is limited due to the interference temperature imposed on the primary user (PU), and the severe path loss and high directivity in mmWave communications make it vulnerable to blockage events, we introduce an intelligent reflecting surface (IRS) into mmWave CRNs. Due to the estimation mismatch and the passivity of Eavesdroppers (Eves), perfect channel state information (CSI) of wiretap links is challenging to obtain, which promotes our research on robust secure beamforming (BF) design in the IRS-assisted mmWave CRNs. This paper considers the collaborate scenario of Eves, which allows us to investigate the BF design in the harsh eavesdropping environment. Specifically, by using a uniform linear array (ULA) at the cognitive base station (CBS) and a uniform planar array (UPA) at the IRS, and supposing that imperfect CSIs of angle-of-departures for wiretap links are known, we formulate a constrained problem to maximize the worst-case achievable secrecy rate (ASR) of the secondary user (SU) by jointly designing the transmit BF at the CBS and reflect BF at the IRS. To solve the non-convex problem with coupled variables, an efficient alternating optimization algorithm is proposed. Finally, simulation results indicate that the ASR performance of our proposed algorithm has a small gap with that of the optimal solution with perfect CSI compared with the other benchmarks.