PPPallavi Paliwal

Pallavi Paliwal

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Pallavi Paliwal has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Fast Settling Phase-Locked Loops: A Comprehensive Survey of Applications and Techniques [Feature]

    by Zeeshan Ali, Pallavi Paliwal, Meraj Ahmad, Hadi Heidari, Shalabh Gupta

    Fast settling phase locked loops (PLLs) play a pivotal role in many applications requiring rapid attainment of a stable frequency and phase. In modern communication standards, these PLLs are extensively utilized to guarantee precise compliance with dynamic resource allocation requirements. In processors, these PLLs manage dynamic voltage frequency scaling. Moreover, the fast-settling PLLs expedite the scanning of frequency spectra in sophisticated electronic radar set-ups, proving particularly advantageous for imaging and scanning radar applications. The rapid response exhibited by these PLLs is also harnessed in quantum technologies, catering to the urgent need for precise frequency adjustments to manipulate qubit states effectively. The strategies employed to attain fast-settling PLLs are primarily classified into five broad techniques in this article: enhanced phase frequency detection, hybrid multiple subsystems, VCO start-up, gear shift, and look-up table or finite state machine. This article explores the fundamental operational principles encompassing these techniques and presents optimal settling times for each method reported in the literature. Finally, the architectures utilizing these techniques will be evaluated based on their figure of merit (FoM), settling time, and tuning range.


  • Stability Analysis for Fast Settling Switched Digital Phase-Locked Loops (DPLLs)

    by Zeeshan Ali, Pallavi Paliwal, Phani Raj, Deepak Anand, Debasattam Pal, Shalabh Gupta

    In current generation digital phase-locked loop (DPLL) architectures, techniques like gear-shift mechanism and switched phase-detection are employed to achieve better lock time and jitter performance. This work presents a framework for detailed analysis of the stability and settling behaviour of switched DPLL architectures using Lyapunov theory. The loop-parameters verified based on these stability conditions ensure that chattering does not occur during switching between different subsystems. A 5 GHz DPLL designed with these loop parameters and an error-tracking finite state machine (ET-FSM) is presented in this work. The state machine with a bang-bang phase detector (BBPD) aids in faster locking by tracking the settling behaviour of the loop in the previous clock cycles, and accordingly deciding the loop parameters. The DPLL with lock in around 100 clock cycles for 100 MHz reference clock, obtained using MATLAB and schematic simulations, verifies the efficacy of the state machine.


  • A Fast Settling Fractional-$N$ DPLL With Loop-Order Switching

    by Pallavi Paliwal, Vivek Yadav, Zeeshan Ali, Shalabh Gupta

    The enhancement in the settling response of frequency synthesizers would open up prospects for new applications such as spread spectra and frequency hopping systems. Toward deriving a methodology for a fast settling response, we present a switched-loop digital phase locked loop (DPLL) incorporating an integral-derivative controller-based subsystem. The dominant features accelerating the settling response with low jitters in this DPLL are: 1) hybrid phase detection with a state machine using differential and double integration filtering effect and 2) a time-interleaved direct digital synthesizer (DDS)-based digital-to-time converter (DTC) with stable-edge sampling. A 5-GHz fractional-N DPLL (FNDPLL) has been implemented in CMOS 65-nm-LL technology with the proposed technique of loop-order switching. The measured results of the implemented FNDPLL highlight that the system is capable of fastest reported frequency settling to ±25-ppm error within 1.5 μs, using a reference clock frequency of 100 MHz. With one-time calibration, the downsampled output of DDS array-based phase interpolator achieves an integral nonlinearity (INL) of 0.25 ps, as a fractional divider in the loop.


  • A High-Resolution Digital Phase Interpolator Based CDR with a Half-Rate Hybrid Phase Detector

    by Arun Goyal, Souvik Ghosh, Sandeep Goyal, Pallavi Paliwal, Shalabh Gupta

    In this paper, we propose a low power, high-resolution digitally controlled phase interpolator based clock and data recovery (CDR) architecture for high-speed serial links. This architecture incorporates a half-rate hybrid phase detector (HyPD) consisting of a linear phase detector with a 2-tap decision feedback equalizer (DFE), a 1-bit comparator, and an 8-bit digitally controlled phase interpolator. HyPD results in better power performance over the bang-bang phase detector. DFE used in HyPD combats the effect of inter-symbol-interference (ISI) and improves the sampling margins. The phase interpolator provides an unlimited phase capture with a resolution of 1.41° per LSB for varying phase of the input clock. The differential and integral nonlinearities of the DAC based phase interpolator are within ±0.28 LSB and ±0.3 LSB respectively, which lead to low jitter in the recovered clock. We have designed a 5 Gb/s CDR in a 0.18-μm standard CMOS technology. It draws 23.4 mW of power from a 1.8-V supply.


  • Open Access

    A Phase Lookahead DTC for Fast Settling Switched Loop DPLL

    by Pallavi Paliwal, Vivek Yadav, Shalabh Gupta

    In most digital-to-time converter (DTC) based applications, apart from maintaining low integral non-linearity (INL), it is also required of the system to achieve a wide frequency translation range. To achieve this performance, we present a dual-phase direct digital synthesizer (DDS) based DTC with phase-lookahead mechanism. The proposed technique of variable phase-advancement enhances the frequency translation range, without excessive power consumption. A 5-GHz digital phase locked loop (DPLL) with switched loop, incorporating this DDS based DTC, is implemented in CMOS65nm-LL technology. The proposed DDS based DTC is able to perform fractional shift upto 80MHz with 100MHz reference clock, using 3mW of power from 1.2V supply. A simple look-up table based foreground-calibration of phase-to-amplitude converter (PAC) in DDS improves the peak INL of the DTC to 0.25ps. Hence, with the proposed DTC and a proportional-integral-derivative (PID) controller based loop, we are able to achieve a low-jitter fractional-N DPLL with fastest settling time of 1us reported until now for fractional-N PLLs.

  • Open Access

    Stability Analysis for Fast Settling Switched DPLL

    by Pallavi Paliwal, Debasattam Pal, Shalabh Gupta

    In current generation digital phase locked loop (DPLL) architectures, techniques like adaptive loop bandwidth with loop order switching and switched phase-detection are employed to achieve better lock time and jitter performance. This work derives stability conditions for such DPLL architectures using Multiple Lyapunov Functions (MLFs) for switched systems. The loop-parameters chosen on the basis of these stability conditions ensure that chattering phenomenon does not occur during switching between different subsystems. A 5GHz fractional-N DPLL designed with these loop-parameter values is fabricated in CMOS65nm-LL technology. The measured settling time of the implemented DPLL is within 1us. The efficiency of switching rule and stability conditions used for this DPLL is validated with the fast settling response, which is the best lock time reported until now for fractional-N DPLLs.

  • A low-jitter digital-to-time converter with look-ahead multi-phase DDS

    by Harishankar Sahu, Pallavi Paliwal, Vivek Yadav, Shalabh Gupta

    We propose a multi-phase Direct Digital Synthesizer (DDS) based Digital to Time Converter (DTC), for application in fractional-N Digital Phase Locked Loops (DPLLs). The proposed DTC employs (i) multiple DDSs operating with incremental delay for reduced quantization step size, and (ii) a phase-advanced ROM in these DDSs for correct waveform extrapolation. The incrementally delayed output from multiple DDSs allows reduction in harmonics associated with the quantized steps, and the look-ahead feature of phase advanced ROM allows DTC operation even at the Nyquist rate. The DTC, designed in 65 nm CMOS-LL technology, achieves 1.2 ps jitter with 10 mW power consumption, while operating at 4.8 GHz input frequency. Also, the fractional-N DPLL employing the proposed multi-phase DDS based DTC in its feedback path is able to attain -341 dB as Figure of Merit, which is the best amongst the published results, with a very low settling time-jitter product.


  • A Fast Settling 4.7-5 GHz Fractional-N Digital Phase Locked Loop

    by Pallavi Paliwal, Jaydip Fadadu, Anil Chawda, Shalabh Gupta

    In phase locked loops, settling time and tuning range form important performance parameters, in addition to jitter and power consumption. However, most PLLs are designed for improvement only in jitter and power, thus resulting in longer settling time. This work proposes an offset-frequency based fractional-N DPLL for generating frequency in the range of 4.7 GHz-5 GHz. The proposed PLL employs (i) hybrid phase detection with different TDC blocks to avoid the need of improving the TDC resolution for low jitter, (ii) a state machine using differential and double integration filtering effect for fast locking in the final stage of settling, and (iii) an infinite delay range DTC wherein the resolution of fractional frequency could be controlled independent of the loop bandwidth. The PLL is implemented in 65nm CMOS-LL technology and is able to achieve a competitive performance with 1.5μs settling time, 1.7ps jitter and power consumption of 25mW.


  • High resolution digital-to-time converter for low jitter digital PLLs

    by Anil Chawda, Pallavi Paliwal, Priyank Laad, Shalabh Gupta

    We propose a Digial-to-Time Converter (DTC) that is capable of providing infinite-delay-over-time for application in low-jitter digital phase locked loops. The DTC is implemented using phase interpolation of quadrature phase high-speed clock signals with weight coefficients generated by direct digital synthesis. Novelty of the architecture lies in using (i) a slow-settling current steering DAC that provides low jitter at sampling clock; (ii) a current reuse mixer at the output of the DAC that saves power and improves linearity; and (iii) a folded architecture of low pass current-mode gyrator filter at the mixer output that allows sufficient voltage headroom. The proposed DTC, designed in 90 nm CMOS technology, achieves 1.85 ps in time resolution and consumes 2.2 mW of power from IV supply. To the best of our knowledge, the proposed architecture provides best resolution and linearity for a DTC capable of providing infinite-delay-overtime.


  • Tradeoffs between settling time and jitter in phase locked loops

    by Pallavi Paliwal, Priyank Laad, Mohanrao Sattineni, Shalabh Gupta

    In most phase locked loops, an obvious trade-off exists between settling time, output jitter and power consumption. However, dependence of jitter on settling time is commonly ignored while evaluating PLL designs. In this paper, the tradeoffs between settling time and jitter is analyzed for different types of All-Digital PLLs (ADPLLs). Based on these analytical results, a Figure of Merit (FoM) for evaluating PLLs, which takes settling time into consideration, is suggested. Survey carried out over state-of-the-art PLLs indicates that the proposed FoM provides a much better trend compared to previously used FoM that does not take the settling time into account. Finally, a 2.4-GHz Direct-Digital Synthesis based AD-PLL model, which combines phase detection switching, adaptive gain and FSM based mechanism, is explored to gain simultaneous optimization of PLL performance parameters.