Illia Serhiienko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Illia Serhiienko has a total of 67 co-authors. Here are the top co-authors by number of shared publications:
- Takao Mori
National Institute for Materials Science
9 shared publications - Fabian Garmroudi
Los Alamos National Laboratory
5 shared publications - Michael Parzer
Institute of Solid State Physics, TU Wien, Vienna, Austria
4 shared publications - Andrei Novitskii
Research Center for Materials Nanoarchitectonics (MANA), National Institute for Materials Science (NIMS), Tsukuba 305-0044, Japan
3 shared publications - Andrej Pustogow
Institute of Solid State Physics, TU Wien, Vienna, Austria
3 shared publications - Sima Aminorroaya Yamini
Materials and Engineering Research Institute, Sheffield Hallam University, Sheffield S1 1WB, U.K.
3 shared publications
Latest Publications
- Open Access
- 25 August 2026
- Published by Springer Nature in Communications Materials
Tracking flat bands via phonon-mediated interband scattering
Flat-band (FB) systems offer a fertile platform for realizing exotic correlated and topological phases, yet central challenges remain in tuning FBs towards the Fermi level E F and in understanding their impact on electronic transport. Identifying how close a FB lies to E F normally requires advanced spectroscopic probes or extensive doping studies hindering fast screening of promising candidates. Here, we show that standard electrical resistivity measurements already contain a clear and universal fingerprint of the proximity of a FB to E F : A characteristic curvature in the temperature-dependent resistivity at high temperatures, i.e., sublinear (superlinear) behavior when E F lies within (away from) the FB states. Within a phenomenological model, we can attribute this response to the rapid change in scattering phase space associated with interband transitions from dispersive to FB states. Notably, this characteristic emerges independently of microscopic details, such as the electron-phonon coupling strength, as confirmed by comparison with ab initio electron-phonon transport calculations. We validate this mechanism across several FB materials – including kagome, pyrochlore and Cu 3 Au-type intermetallics – by combining high-temperature resistivity measurements with a modified Bloch-Grüneisen analysis. Our results establish a simple and broadly applicable method to locate FBs via electronic transport, enabling rapid screening of promising FB materials.
- 25 August 2026
- Published by Springer Nature in Communications Materials
Open AccessTracking flat bands via phonon-mediated interband scattering
Flat-band (FB) systems offer a fertile platform for realizing exotic correlated and topological phases, yet central challenges remain in tuning FBs towards the Fermi level E F and in understanding their impact on electronic transport. Identifying how close a FB lies to E F normally requires advanced spectroscopic probes or extensive doping studies hindering fast screening of promising candidates. Here, we show that standard electrical resistivity measurements already contain a clear and universal fingerprint of the proximity of a FB to E F : A characteristic curvature in the temperature-dependent resistivity at high temperatures, i.e., sublinear (superlinear) behavior when E F lies within (away from) the FB states. Within a phenomenological model, we can attribute this response to the rapid change in scattering phase space associated with interband transitions from dispersive to FB states. Notably, this characteristic emerges independently of microscopic details, such as the electron-phonon coupling strength, as confirmed by comparison with ab initio electron-phonon transport calculations. We validate this mechanism across several FB materials – including kagome, pyrochlore and Cu 3 Au-type intermetallics – by combining high-temperature resistivity measurements with a modified Bloch-Grüneisen analysis. Our results establish a simple and broadly applicable method to locate FBs via electronic transport, enabling rapid screening of promising FB materials.
- Open Access
- 16 July 2026
- Published by Taylor & Francis in Science and Technology of Advanced Materials
- Vol. 27 (1) , 2675215
Transport and hardness properties of Cr 2 TiAlC 2 MAX phase synthesized by reactive spark plasma sintering
MAX phases are a family of layered compounds of chemical formula Mn +1AXn, with M = transition metal, A = A-layer element (typically group 13 or 14 elements), and X = C and/or N discovered in the 1...
- 16 July 2026
- Published by Taylor & Francis in Science and Technology of Advanced Materials
- Vol. 27 (1) , 2675215
Open AccessTransport and hardness properties of Cr 2 TiAlC 2 MAX phase synthesized by reactive spark plasma sintering
MAX phases are a family of layered compounds of chemical formula Mn +1AXn, with M = transition metal, A = A-layer element (typically group 13 or 14 elements), and X = C and/or N discovered in the 1...
- Open Access
- 9 March 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Orbital-selective band engineering realizes high zT in p-type Ru2Ti1−xHfxSi full-Heusler thermoelectrics
Heusler compounds have emerged as important thermoelectric materials due to their combination of promising electronic transport properties, mechanical robustness and chemical stability – key aspects for practical device integration. While a wide range of XYZ-type half-Heusler compounds have been studied for high-temperature applications, X 2 YZ-type full-Heuslers, often characterized by narrower band gaps, may offer potential advantages at different temperature regimes but remain less explored. In this work, the discovery of p -type Ru 2 Ti 1−x Hf x Si full-Heusler thermoelectrics, exhibiting a high figure of merit zT = 0.7 over a broad range of temperatures 700–1000 K, is reported. These results not only represent the largest values known to date among full-Heusler materials but confirm earlier theoretical predictions that p -type Ru 2 TiSi systems would be superior to their n -type counterparts. Moreover, using a two-band model, electronic structure changes induced by the Hf substitution at the Ti site are unveiled and strategies to further improve zT up to zT > 1 are outlined. These findings highlight the untapped potential of new semiconducting full-Heusler phases and the crucial need for continued exploration of this rich materials class for thermoelectric applications.
- 9 March 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessOrbital-selective band engineering realizes high zT in p-type Ru2Ti1−xHfxSi full-Heusler thermoelectrics
Heusler compounds have emerged as important thermoelectric materials due to their combination of promising electronic transport properties, mechanical robustness and chemical stability – key aspects for practical device integration. While a wide range of XYZ-type half-Heusler compounds have been studied for high-temperature applications, X 2 YZ-type full-Heuslers, often characterized by narrower band gaps, may offer potential advantages at different temperature regimes but remain less explored. In this work, the discovery of p -type Ru 2 Ti 1−x Hf x Si full-Heusler thermoelectrics, exhibiting a high figure of merit zT = 0.7 over a broad range of temperatures 700–1000 K, is reported. These results not only represent the largest values known to date among full-Heusler materials but confirm earlier theoretical predictions that p -type Ru 2 TiSi systems would be superior to their n -type counterparts. Moreover, using a two-band model, electronic structure changes induced by the Hf substitution at the Ti site are unveiled and strategies to further improve zT up to zT > 1 are outlined. These findings highlight the untapped potential of new semiconducting full-Heusler phases and the crucial need for continued exploration of this rich materials class for thermoelectric applications.
- Open Access
- 14 May 2025
- Published by American Physical Society (APS) in Physical Review X
- Vol. 15 (2)
Topological Flat-Band-Driven Metallic Thermoelectricity
Materials where flattened electronic dispersions arise from destructive phase interference, rather than localized orbitals, have emerged as promising platforms for studying emergent quantum phenomena. Crucial next steps involve tuning such flat bands to the Fermi level, where they can be studied at low energy scales, and assessing their potential for practical applications. Here, we show that the interplay of highly dispersive and ultraflat bands inherent to these systems can lead to extreme interband scattering-induced electron-hole asymmetry, which can be harnessed in thermoelectrics. Our comprehensive theoretical and experimental investigation of Ni 3 In 1 − x Sn x kagome metals supports this concept, showing that it could lead to thermoelectric performance on par with state-of-the-art semiconductors such as Bi 2 Te 3 . In Ni 3 In , scattering-induced electron-hole asymmetry is, however, subdued by an exotic conduction mechanism arising from quantum tunneling of charge carriers between Dirac bands, unrelated to the flat band itself. We outline strategies to selectively switch off this tunneling transport through negative chemical pressure or strain. Our study proposes a new direction to explore in topological flat-band systems and vice versa introduces a novel tuning knob for thermoelectric materials. Published by the American Physical Society 2025
- 14 May 2025
- Published by American Physical Society (APS) in Physical Review X
- Vol. 15 (2)
Open AccessTopological Flat-Band-Driven Metallic Thermoelectricity
Materials where flattened electronic dispersions arise from destructive phase interference, rather than localized orbitals, have emerged as promising platforms for studying emergent quantum phenomena. Crucial next steps involve tuning such flat bands to the Fermi level, where they can be studied at low energy scales, and assessing their potential for practical applications. Here, we show that the interplay of highly dispersive and ultraflat bands inherent to these systems can lead to extreme interband scattering-induced electron-hole asymmetry, which can be harnessed in thermoelectrics. Our comprehensive theoretical and experimental investigation of Ni 3 In 1 − x Sn x kagome metals supports this concept, showing that it could lead to thermoelectric performance on par with state-of-the-art semiconductors such as Bi 2 Te 3 . In Ni 3 In , scattering-induced electron-hole asymmetry is, however, subdued by an exotic conduction mechanism arising from quantum tunneling of charge carriers between Dirac bands, unrelated to the flat band itself. We outline strategies to selectively switch off this tunneling transport through negative chemical pressure or strain. Our study proposes a new direction to explore in topological flat-band systems and vice versa introduces a novel tuning knob for thermoelectric materials. Published by the American Physical Society 2025
- Open Access
- 14 April 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (20) , 15268-15277
Pivotal role of Sb vacancies in quaternary half-Heusler thermoelectrics
The pivotal role of intrinsic defects in nominally stoichiometric X(Fe0.5Ni0.5)Sb quaternary half-Heuslers (X = Ti, Zr, or Hf) is revealed. The Sb vacancies naturally occur during synthesis and can alter the conduction behavior from n-to p-type.
- 14 April 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (20) , 15268-15277
Open AccessPivotal role of Sb vacancies in quaternary half-Heusler thermoelectrics
The pivotal role of intrinsic defects in nominally stoichiometric X(Fe0.5Ni0.5)Sb quaternary half-Heuslers (X = Ti, Zr, or Hf) is revealed. The Sb vacancies naturally occur during synthesis and can alter the conduction behavior from n-to p-type.
- Open Access
- 26 March 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-9
Decoupled charge and heat transport in Fe2VAl composite thermoelectrics with topological-insulating grain boundary networks
Decoupling charge and heat transport is essential for optimizing thermoelectric materials. Strategies to inhibit lattice-driven heat transport, however, also compromise carrier mobility, limiting the performance of most thermoelectrics, including Fe2VAl Heusler compounds. Here, we demonstrate an innovative approach, which bypasses this tradeoff: via liquid-phase sintering, we incorporate the archetypal topological insulator Bi1−x Sb x between Fe2V0.95Ta0.1Al0.95 grains. Structural investigations alongside extensive thermoelectric and magneto-transport measurements reveal distinct modifications in the microstructure, a reduced lattice thermal conductivity and a simultaneously enhanced carrier mobility arising from topologically protected charge transport along the grain boundaries. This yields a huge performance boost, resulting in one of the highest figure of merits among both half- and full-Heusler compounds, z ≈ 1.6 × 10−3 K−1 (z T ≈ 0.5) at 295 K. Our findings highlight the potential of topological-insulating secondary phases to decouple charge and heat transport and call for more advanced theoretical studies of multiphase composites.
- 26 March 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-9
Open AccessDecoupled charge and heat transport in Fe2VAl composite thermoelectrics with topological-insulating grain boundary networks
Decoupling charge and heat transport is essential for optimizing thermoelectric materials. Strategies to inhibit lattice-driven heat transport, however, also compromise carrier mobility, limiting the performance of most thermoelectrics, including Fe2VAl Heusler compounds. Here, we demonstrate an innovative approach, which bypasses this tradeoff: via liquid-phase sintering, we incorporate the archetypal topological insulator Bi1−x Sb x between Fe2V0.95Ta0.1Al0.95 grains. Structural investigations alongside extensive thermoelectric and magneto-transport measurements reveal distinct modifications in the microstructure, a reduced lattice thermal conductivity and a simultaneously enhanced carrier mobility arising from topologically protected charge transport along the grain boundaries. This yields a huge performance boost, resulting in one of the highest figure of merits among both half- and full-Heusler compounds, z ≈ 1.6 × 10−3 K−1 (z T ≈ 0.5) at 295 K. Our findings highlight the potential of topological-insulating secondary phases to decouple charge and heat transport and call for more advanced theoretical studies of multiphase composites.
- 11 November 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (20)
Enhanced thermoelectric performance of p-type BiSbTe through incorporation of magnetic CrSb
There is evidence that magnetism can potentially increase the thermopower of materials, most likely due to magnon scattering, suggesting the incorporation of intrinsic magnetic semiconductors in non-magnetic thermoelectric materials. Here, samples of p-type Bi0.5Sb1.5Te3 with 10 at. % excess Te are ball-milled with varying ratios of the antiferromagnetic semiconductor CrSb (0, 0.125, 0.5, and 1 wt. %) to prepare bulk samples by spark plasma sintering technique. The thermopower of samples containing CrSb is increased due to an increase in the effective mass of the charge carriers, indicating that there is a drag effect originating from the magnetic particles. However, this was at the expense of reduced electrical conductivity caused by reduced charge carrier mobility. While overall only marginal improvements in power factors were observed, these samples exhibited significantly lower thermal conductivity compared to the single-phase material. As a result, a peak zT value of ∼1.4 was achieved at 325 K for the sample with 0.125 wt. % CrSb. These results highlight the potential of incorporating magnetic secondary phases to enhance the thermoelectric performance of materials.
- 11 November 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (20)
Enhanced thermoelectric performance of p-type BiSbTe through incorporation of magnetic CrSb
There is evidence that magnetism can potentially increase the thermopower of materials, most likely due to magnon scattering, suggesting the incorporation of intrinsic magnetic semiconductors in non-magnetic thermoelectric materials. Here, samples of p-type Bi0.5Sb1.5Te3 with 10 at. % excess Te are ball-milled with varying ratios of the antiferromagnetic semiconductor CrSb (0, 0.125, 0.5, and 1 wt. %) to prepare bulk samples by spark plasma sintering technique. The thermopower of samples containing CrSb is increased due to an increase in the effective mass of the charge carriers, indicating that there is a drag effect originating from the magnetic particles. However, this was at the expense of reduced electrical conductivity caused by reduced charge carrier mobility. While overall only marginal improvements in power factors were observed, these samples exhibited significantly lower thermal conductivity compared to the single-phase material. As a result, a peak zT value of ∼1.4 was achieved at 325 K for the sample with 0.125 wt. % CrSb. These results highlight the potential of incorporating magnetic secondary phases to enhance the thermoelectric performance of materials.
- Open Access
- 6 September 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Defect Engineering of Bi2SeO2 Thermoelectrics
Bi2SeO2 is a promising n-type semiconductor to pair with p-type BiCuSeO in a thermoelectric (TE) device. The TE figure of merit zT and, therefore, the device efficiency must be optimized by tuning the carrier concentration. However, electron concentrations in self-doped n-type Bi2SeO2 span several orders of magnitude, even in samples with same nominal compositions. Such unsystematic variations in the electron concentration has a thermodynamic origin related to the variations in native defect concentrations. In this study, we use first-principles calculations to show that the selenium vacancy, which is the source of n-type conductivity in Bi2SeO2, varies by 1-2 orders of magnitude depending on the thermodynamic conditions. We predict that the electron concentration can be enhanced by synthesizing under more Se-poor conditions and/or at higher solid-state reaction temperatures (T_SSR), which promote the formation of selenium vacancies without introducing extrinsic dopants. We validate our computational predictions through solid-state synthesis of Bi2SeO2. We observe more than two orders of magnitude increase in the electron concentration simply by adjusting the synthesis conditions. Additionally, we reveal the significant effect of grain boundary scattering on electron mobility in Bi2SeO2, which can also be controlled by adjusting T_SSR. By simultaneously optimizing the electron concentration and mobility, we achieve a zT of ~0.2 at 773 K for self-doped n-type Bi2SeO2. Our study highlights the need for careful control of thermodynamic growth conditions and demonstrates TE performance improvement by varying synthesis parameters according to thermodynamic guidelines.
- 6 September 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessDefect Engineering of Bi2SeO2 Thermoelectrics
Bi2SeO2 is a promising n-type semiconductor to pair with p-type BiCuSeO in a thermoelectric (TE) device. The TE figure of merit zT and, therefore, the device efficiency must be optimized by tuning the carrier concentration. However, electron concentrations in self-doped n-type Bi2SeO2 span several orders of magnitude, even in samples with same nominal compositions. Such unsystematic variations in the electron concentration has a thermodynamic origin related to the variations in native defect concentrations. In this study, we use first-principles calculations to show that the selenium vacancy, which is the source of n-type conductivity in Bi2SeO2, varies by 1-2 orders of magnitude depending on the thermodynamic conditions. We predict that the electron concentration can be enhanced by synthesizing under more Se-poor conditions and/or at higher solid-state reaction temperatures (T_SSR), which promote the formation of selenium vacancies without introducing extrinsic dopants. We validate our computational predictions through solid-state synthesis of Bi2SeO2. We observe more than two orders of magnitude increase in the electron concentration simply by adjusting the synthesis conditions. Additionally, we reveal the significant effect of grain boundary scattering on electron mobility in Bi2SeO2, which can also be controlled by adjusting T_SSR. By simultaneously optimizing the electron concentration and mobility, we achieve a zT of ~0.2 at 773 K for self-doped n-type Bi2SeO2. Our study highlights the need for careful control of thermodynamic growth conditions and demonstrates TE performance improvement by varying synthesis parameters according to thermodynamic guidelines.
- Open Access
- 16 July 2024
- Published by Elsevier in Physica B: Condensed Matter
- Vol. 691
Thermoelectric performance of n-type Bi2S3-alloyed Bi2Te2.7Se0.3
- 16 July 2024
- Published by Elsevier in Physica B: Condensed Matter
- Vol. 691
Open AccessThermoelectric performance of n-type Bi2S3-alloyed Bi2Te2.7Se0.3
- 14 February 2024
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 6 (2) , 1283-1291
Thermoelectric Properties of Single-Phase n-Type Bi14Te13S8
- 14 February 2024
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 6 (2) , 1283-1291
Thermoelectric Properties of Single-Phase n-Type Bi14Te13S8