Alexander Steven Edgar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Alexander Steven Edgar has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Dali Yang
Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)
12 shared publications Camille Hing Wong
Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)
5 shared publicationsCamille H. Wong
Engineered Materials Group Materials Science and Technology Division Los Alamos National Laboratory P.O. Box 1663 Los Alamos NM USA 87545
4 shared publicationsKitmin Chen
Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)
4 shared publications- Kitmin Chen
MST-7: Engineered Materials Group, Materials Science and Technology Division, Los Alamos National Laboratory, Los Alamos, New Mexico 87545, United States
4 shared publications - Joel David Kress
Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)
3 shared publications
Latest Publications
- 1 October 2024
- Published by Office of Scientific and Technical Information (OSTI)
Key Degradation Products in Nitroplasticizer Thermal Aging
The U.S. Department of Energy's Office of Scientific and Technical Information
- 1 October 2024
- Published by Office of Scientific and Technical Information (OSTI)
Key Degradation Products in Nitroplasticizer Thermal Aging
The U.S. Department of Energy's Office of Scientific and Technical Information
- Open Access
- 6 November 2023
- Published by Office of Scientific and Technical Information (OSTI)
Role of n-phenyl-β-naphthylamine in the Acid-Nitroplasticizer Thermal Aging (ANTA) Experiment
The U.S. Department of Energy's Office of Scientific and Technical Information
- 6 November 2023
- Published by Office of Scientific and Technical Information (OSTI)
Open AccessRole of n-phenyl-β-naphthylamine in the Acid-Nitroplasticizer Thermal Aging (ANTA) Experiment
The U.S. Department of Energy's Office of Scientific and Technical Information
- Open Access
- 25 July 2023
- Published by Office of Scientific and Technical Information (OSTI)
Fast Semi-automated Filtration Method for Non-targeted LC-QTOF Data of Aged Nitroplasticizer Samples
A full dataset of aged nitroplasticizer (NP) is composed of more than 2000 unique mass-to-charges (m/z) when combining the non-targeted data obtained from both positive and negative electrospray ionization modes in time-of-flight mass spectrometry. Therefore, manual processing of these data often takes days, weeks, or even months to scrutinize for mechanistic insights. To effectively extract meaningful signals that represent vital degradation intermediates in the early NP degradation mechanism, a semi-automated postprocessing workflow for data filtering, tailored to the aging experiment of NP, has been developed. The automated portion of this workflow is written in a Python code (using pandas, numpy, and matplotlib libraries), which removes more than 65% of potential false signals within seconds via four threshold-based adjustable filters: signal sensitivity, coefficient of variation, number of measurements, and retention time variability. As for the manual portion, a pattern-based inspection method is employed to reduce another 23% or more false positives, which greatly simplifies data visualization and results in less than 3% of potential candidate m/z needing in-depth data interpretation. As a positive control, known compounds are verified. Using this semi-automated data reduction method, the amount of time required is reduced to a matter of hours for data filtering in themore » non-targeted datasets of aged NP, which saves more time and effort for compound identification. « less
- 25 July 2023
- Published by Office of Scientific and Technical Information (OSTI)
Open AccessFast Semi-automated Filtration Method for Non-targeted LC-QTOF Data of Aged Nitroplasticizer Samples
A full dataset of aged nitroplasticizer (NP) is composed of more than 2000 unique mass-to-charges (m/z) when combining the non-targeted data obtained from both positive and negative electrospray ionization modes in time-of-flight mass spectrometry. Therefore, manual processing of these data often takes days, weeks, or even months to scrutinize for mechanistic insights. To effectively extract meaningful signals that represent vital degradation intermediates in the early NP degradation mechanism, a semi-automated postprocessing workflow for data filtering, tailored to the aging experiment of NP, has been developed. The automated portion of this workflow is written in a Python code (using pandas, numpy, and matplotlib libraries), which removes more than 65% of potential false signals within seconds via four threshold-based adjustable filters: signal sensitivity, coefficient of variation, number of measurements, and retention time variability. As for the manual portion, a pattern-based inspection method is employed to reduce another 23% or more false positives, which greatly simplifies data visualization and results in less than 3% of potential candidate m/z needing in-depth data interpretation. As a positive control, known compounds are verified. Using this semi-automated data reduction method, the amount of time required is reduced to a matter of hours for data filtering in themore » non-targeted datasets of aged NP, which saves more time and effort for compound identification. « less
- Open Access
- 6 June 2023
- Published by Office of Scientific and Technical Information (OSTI)
A Progress Report for a 44-month Aging Study on Nitroplasticizer (NP) Stability – Summary of KF and TGA Results
The U.S. Department of Energy's Office of Scientific and Technical Information
- 6 June 2023
- Published by Office of Scientific and Technical Information (OSTI)
Open AccessA Progress Report for a 44-month Aging Study on Nitroplasticizer (NP) Stability – Summary of KF and TGA Results
The U.S. Department of Energy's Office of Scientific and Technical Information
- 2 June 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (23) , 28649-28663
Chemical Solution Deposition of Protective Er2O3 and Y2O3 Coatings onto Stainless Steel for Molten Metal Casting using Metal-Nitrate Precursors
Chemical solution deposition (CSD) methods involvingthe thermaldecomposition of 5.0 M Er-(NO3)(3)center dot 5H(2)O and Y-(NO3)(3)center dot 6H(2)O precursorsolutions were employed to fabricate protective erbia and yttria coatingsonto stainless steel (SS304/SS316) coupons. The two techniques testedwere dip and spray coating, which were then compared to a commercialyttria spray (ZYP Coatings). It was determined that solution concentration,solvent choice, injection of Er2O3 and Y2O3 micropowder, and the annealing temperature/rampprofile were critical to the coatings' physical properties.For dip coatings, thicknesses were 1-20 mu m after twodipping/annealing cycles, and adhesion strength was similar to 1000 psi,increasing up to similar to 1300 psi if the SS coupons had preliminarysandblasting. Spray coatings from precursor solutions were reportedto have thicknesses of 20-80 mu m and adhesion strengthless than 500 psi (regardless of the coupon surface finish). Cross-sectionalviews of the coatings confirmed subsurface porosity, and XRD resultsindicated that the coatings were polycrystalline, with patterns typicalto that of cubic Er2O3 and Y2O3.
- 2 June 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (23) , 28649-28663
Chemical Solution Deposition of Protective Er2O3 and Y2O3 Coatings onto Stainless Steel for Molten Metal Casting using Metal-Nitrate Precursors
Chemical solution deposition (CSD) methods involvingthe thermaldecomposition of 5.0 M Er-(NO3)(3)center dot 5H(2)O and Y-(NO3)(3)center dot 6H(2)O precursorsolutions were employed to fabricate protective erbia and yttria coatingsonto stainless steel (SS304/SS316) coupons. The two techniques testedwere dip and spray coating, which were then compared to a commercialyttria spray (ZYP Coatings). It was determined that solution concentration,solvent choice, injection of Er2O3 and Y2O3 micropowder, and the annealing temperature/rampprofile were critical to the coatings' physical properties.For dip coatings, thicknesses were 1-20 mu m after twodipping/annealing cycles, and adhesion strength was similar to 1000 psi,increasing up to similar to 1300 psi if the SS coupons had preliminarysandblasting. Spray coatings from precursor solutions were reportedto have thicknesses of 20-80 mu m and adhesion strengthless than 500 psi (regardless of the coupon surface finish). Cross-sectionalviews of the coatings confirmed subsurface porosity, and XRD resultsindicated that the coatings were polycrystalline, with patterns typicalto that of cubic Er2O3 and Y2O3.
- Open Access
- 16 April 2023
- Published by Wiley in X-Ray Spectrometry
- Vol. 53 (1) , 2-15
Analysis of Coronado State Historic Site artifacts using X‐rays
Two historic‐period metal artifacts were provided by the New Mexico Historic Sites to Los Alamos National Laboratory for non‐destructive analysis. The artifacts were a crossbow quarrel (or bolthead) and a reliquary pendant recovered from Kuaua Pueblo (also known as the Coronado Historic Site) in Bernalillo, NM. The quarrel is a heavily patinated metal that had been flattened due to compressive forces. The pendant consisted of a metal casing that had previously surrounded two center gemstones on the front and rear face of the pendant. The gemstone in the rear setting had fractured and was displaced from the setting, leaving only a small, loose fragment within the pendant for study. The front gem appeared to be very dark, near‐black in color, and the fragment of the rear gem was a bright red color. The artifacts were analyzed to ascertain their composition and glean insight into their provenance using the following X‐ray techniques: X‐ray computed tomography, confocal micro X‐ray fluorescence, and X‐ray diffraction. Infrared spectroscopy and electron microscopy were used on selected areas. Ultraviolet Raman spectra were collected on the two gems and the pendant. The metal material of the artifacts was found to be primarily composed of copper. The gems in the pendant were composed of manganese (front gem) and calcium (side gem).
- 16 April 2023
- Published by Wiley in X-Ray Spectrometry
- Vol. 53 (1) , 2-15
Open AccessAnalysis of Coronado State Historic Site artifacts using X‐rays
Two historic‐period metal artifacts were provided by the New Mexico Historic Sites to Los Alamos National Laboratory for non‐destructive analysis. The artifacts were a crossbow quarrel (or bolthead) and a reliquary pendant recovered from Kuaua Pueblo (also known as the Coronado Historic Site) in Bernalillo, NM. The quarrel is a heavily patinated metal that had been flattened due to compressive forces. The pendant consisted of a metal casing that had previously surrounded two center gemstones on the front and rear face of the pendant. The gemstone in the rear setting had fractured and was displaced from the setting, leaving only a small, loose fragment within the pendant for study. The front gem appeared to be very dark, near‐black in color, and the fragment of the rear gem was a bright red color. The artifacts were analyzed to ascertain their composition and glean insight into their provenance using the following X‐ray techniques: X‐ray computed tomography, confocal micro X‐ray fluorescence, and X‐ray diffraction. Infrared spectroscopy and electron microscopy were used on selected areas. Ultraviolet Raman spectra were collected on the two gems and the pendant. The metal material of the artifacts was found to be primarily composed of copper. The gems in the pendant were composed of manganese (front gem) and calcium (side gem).
- Open Access
- 11 April 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 8 (16) , 14730-14741
Roles of HNOxand Carboxylic Acids in the Thermal Stability of Nitroplasticizer
In the thermal aging of nitroplasticizer (NP), the produced nitrous acid (HONO) can decompose into reactive nitro-oxide species and nitric acid (HNO3). These volatile species are prone to cause cascaded deterioration of NP and give rise to various acidic constituents. To gain insight on the early stage of NP degradation, an adequate method for measuring changes in the concentrations of HONO, HNO3, and related acidic species is imperative. The typical assessment of acidity in nonaqueous solutions (i.e., acid number) cannot differentiate acidic species and thus presents difficulty in the measurement of HONO and HNO3 at a micromolar concentration level. Using liquid–liquid extraction and ion chromatography (IC), we developed a fast and unambiguous analytical method to accurately determine the concentration of HONO, HNO3, acetic/formic acids, and oxalic acid in aged NP samples. Given by the overlay analysis results of liquid chromatography coupled with quadrupole time-of-flight mass spectrometry and IC, the prominent increase of produced HONO after the depletion of antioxidants is the primary cause of HNO3 formation in the late stage of NP degradation, which results in the acid-catalyzed hydrolysis of NP into 2,2-dinitropropanol and acetic/formic acids. Our study has demonstrated that the aging temperature plays a crucial role in accelerating the formation and decomposition of HONO, which consequently increases the acidity of aged NP samples and hence accelerates the hydrolyzation of NP. Therefore, to prevent NP from undergoing rapid degradation, we suggest that the concentration of HNO3 should be maintained below 1.35 mM and the temperature under 38 °C.
- 11 April 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 8 (16) , 14730-14741
Open AccessRoles of HNOxand Carboxylic Acids in the Thermal Stability of Nitroplasticizer
In the thermal aging of nitroplasticizer (NP), the produced nitrous acid (HONO) can decompose into reactive nitro-oxide species and nitric acid (HNO3). These volatile species are prone to cause cascaded deterioration of NP and give rise to various acidic constituents. To gain insight on the early stage of NP degradation, an adequate method for measuring changes in the concentrations of HONO, HNO3, and related acidic species is imperative. The typical assessment of acidity in nonaqueous solutions (i.e., acid number) cannot differentiate acidic species and thus presents difficulty in the measurement of HONO and HNO3 at a micromolar concentration level. Using liquid–liquid extraction and ion chromatography (IC), we developed a fast and unambiguous analytical method to accurately determine the concentration of HONO, HNO3, acetic/formic acids, and oxalic acid in aged NP samples. Given by the overlay analysis results of liquid chromatography coupled with quadrupole time-of-flight mass spectrometry and IC, the prominent increase of produced HONO after the depletion of antioxidants is the primary cause of HNO3 formation in the late stage of NP degradation, which results in the acid-catalyzed hydrolysis of NP into 2,2-dinitropropanol and acetic/formic acids. Our study has demonstrated that the aging temperature plays a crucial role in accelerating the formation and decomposition of HONO, which consequently increases the acidity of aged NP samples and hence accelerates the hydrolyzation of NP. Therefore, to prevent NP from undergoing rapid degradation, we suggest that the concentration of HNO3 should be maintained below 1.35 mM and the temperature under 38 °C.
- Open Access
- 5 October 2022
- Published by Office of Scientific and Technical Information (OSTI)
Aging and Lifetimes Program Annual Report - Part I: Update to BDNPA-BDNPF phase diagram (FY2022)
The U.S. Department of Energy's Office of Scientific and Technical Information
- 5 October 2022
- Published by Office of Scientific and Technical Information (OSTI)
Open AccessAging and Lifetimes Program Annual Report - Part I: Update to BDNPA-BDNPF phase diagram (FY2022)
The U.S. Department of Energy's Office of Scientific and Technical Information