Reina Nemoto
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Reina Nemoto has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
Hiroyuki Miura
Department of Fixed Prosthodontics, Division of Oral Health Sciences, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU), Tokyo, Japan
4 shared publicationsKosuke Nozaki
Department of Advanced Prosthodontics, Division of Oral Health Sciences, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU), Tokyo, Japan
4 shared publicationsMina Takita
Department of Masticatory Function and Health Science, Division of Oral Health Sciences, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU), Tokyo, Japan
2 shared publicationsSatoshi Omori
Department of Fixed Prosthodontics, Division of Oral Health Sciences, Graduate School of Medical and Dental Sciences Tokyo Medical and Dental University (TMDU) Tokyo Japan
2 shared publicationsTasuku Inagaki
Fixed Prosthodontics, Division of Oral Health Sciences, Graduate School of Medical and Dental Science, Tokyo Medical and Dental University, Tokyo, Japan
2 shared publicationsAyana Uraba
Fixed Prosthodontics, Division of Oral Health Sciences, Graduate School of Medical and Dental Science, Tokyo Medical and Dental University, Tokyo, Japan
1 shared publication
Latest Publications
- Open Access
- 21 February 2022
- Published by Elsevier in Journal of Dental Sciences
- Vol. 17 (3) , 1115-1124
Investigation of stress distribution within an endodontically treated tooth restored with different restorations
- 21 February 2022
- Published by Elsevier in Journal of Dental Sciences
- Vol. 17 (3) , 1115-1124
Open AccessInvestigation of stress distribution within an endodontically treated tooth restored with different restorations
- 21 November 2020
- Published by Wiley in Journal of Prosthodontics
- Vol. 30 (7) , 617-624
Increased Stress Concentration in Prosthesis, Adhesive Cement, and Periodontal Tissue with Zirconia RBFDPs by the Reduced Alveolar Bone Height
Purpose: To investigate the risk of debonding of resin‐bonded fixed dental prosthesis frameworks and the effects on the periodontal tissue in patients with reduced alveolar bone levels.Materials and methods: The abutment teeth were the upper central incisor and the canine. Resin‐bonded fixed dental prosthesis framework fabricated using zirconia was set to models with five different alveolar bone levels. A 200‐N load (the maximum clenching force of the anterior teeth) was applied to the center of the pontic to analyze the internal stress on the framework, adhesive cement, and periodontal tissue using finite element analysis.Results: The mean maximum principal stress generated in the framework was 25.33 and 29.35 MPa in the models with the normal and the lowest alveolar bone level, respectively. Regarding shear stress on the adhesive cement, stress concentration was observed on the connector side in all models, and it increased on the cervical side of the central incisor as the alveolar bone level decreased. In addition, the mean maximum and minimum principal strains generated on the periodontal ligament of the central incisor and canine tended to increase as alveolar bone loss progressed. Furthermore, the mean maximum principal stress on the cortical bone was the greatest in the model with the most significant bone loss at 5.10 MPa.Conclusions: This study suggested that the risk of debonding and periodontal tissue damage might be higher when resin‐bonded fixed dental prosthesis frameworks were used in patients with reduced alveolar bone levels compared to those in a healthy state.
- 21 November 2020
- Published by Wiley in Journal of Prosthodontics
- Vol. 30 (7) , 617-624
Increased Stress Concentration in Prosthesis, Adhesive Cement, and Periodontal Tissue with Zirconia RBFDPs by the Reduced Alveolar Bone Height
Purpose: To investigate the risk of debonding of resin‐bonded fixed dental prosthesis frameworks and the effects on the periodontal tissue in patients with reduced alveolar bone levels.Materials and methods: The abutment teeth were the upper central incisor and the canine. Resin‐bonded fixed dental prosthesis framework fabricated using zirconia was set to models with five different alveolar bone levels. A 200‐N load (the maximum clenching force of the anterior teeth) was applied to the center of the pontic to analyze the internal stress on the framework, adhesive cement, and periodontal tissue using finite element analysis.Results: The mean maximum principal stress generated in the framework was 25.33 and 29.35 MPa in the models with the normal and the lowest alveolar bone level, respectively. Regarding shear stress on the adhesive cement, stress concentration was observed on the connector side in all models, and it increased on the cervical side of the central incisor as the alveolar bone level decreased. In addition, the mean maximum and minimum principal strains generated on the periodontal ligament of the central incisor and canine tended to increase as alveolar bone loss progressed. Furthermore, the mean maximum principal stress on the cortical bone was the greatest in the model with the most significant bone loss at 5.10 MPa.Conclusions: This study suggested that the risk of debonding and periodontal tissue damage might be higher when resin‐bonded fixed dental prosthesis frameworks were used in patients with reduced alveolar bone levels compared to those in a healthy state.
- Open Access
Enhanced Antibacterial Property of Facet-Engineered TiO2 Nanosheet in Presence and Absence of Ultraviolet Irradiation
Titania (TiO2) has attracted much attention recently for reducing bacterial diseases by the generation of reactive oxygen species (ROS) under UV irradiation. However, demand for higher photocatalytic activity due to higher recombination of electron and hole remains. The aims of this study were to make titania with higher antibacterial property and show the mechanisms of the bactericidal effect. In this study, we hydrothermally synthesized TiO2 nanosheets (NS) with highly-oriented structures. Samples were divided into five groups, depending on the fluorine/titanium ratio in the raw material, namely NS1.0, NS1.2, NS1.5, NS1.8, and NS2.0. Facet ratio and nanosheet size increased with an increase of fluorine/titanium ratio. The photocatalytic activity of TiO2 nanosheet was assessed by the generation of ROS. Hydroxyl radicals and superoxides were generated efficiently by ultraviolet light irradiation on NS1.5 and NS1.0, respectively. Antibacterial activity against Streptococcus mutans was assessed in the presence and absence of UV irradiation; NS1.0 showed superior antibacterial properties compared to commercially available TiO2 nanoparticles, under both conditions, due to the oxidation of intracellular components and cell membrane. These results together suggested TiO2 nanosheet induced bacterial cell death by oxidation, and TiO2 facet engineering resulted in enhancement of both photocatalytic and antibacterial activities of TiO2.
Open AccessEnhanced Antibacterial Property of Facet-Engineered TiO2 Nanosheet in Presence and Absence of Ultraviolet Irradiation
Titania (TiO2) has attracted much attention recently for reducing bacterial diseases by the generation of reactive oxygen species (ROS) under UV irradiation. However, demand for higher photocatalytic activity due to higher recombination of electron and hole remains. The aims of this study were to make titania with higher antibacterial property and show the mechanisms of the bactericidal effect. In this study, we hydrothermally synthesized TiO2 nanosheets (NS) with highly-oriented structures. Samples were divided into five groups, depending on the fluorine/titanium ratio in the raw material, namely NS1.0, NS1.2, NS1.5, NS1.8, and NS2.0. Facet ratio and nanosheet size increased with an increase of fluorine/titanium ratio. The photocatalytic activity of TiO2 nanosheet was assessed by the generation of ROS. Hydroxyl radicals and superoxides were generated efficiently by ultraviolet light irradiation on NS1.5 and NS1.0, respectively. Antibacterial activity against Streptococcus mutans was assessed in the presence and absence of UV irradiation; NS1.0 showed superior antibacterial properties compared to commercially available TiO2 nanoparticles, under both conditions, due to the oxidation of intracellular components and cell membrane. These results together suggested TiO2 nanosheet induced bacterial cell death by oxidation, and TiO2 facet engineering resulted in enhancement of both photocatalytic and antibacterial activities of TiO2.
- 1 April 2018
- Published by Japan Prosthodontic Society in Journal of Prosthodontic Research
- Vol. 62 (2) , 227-233
Biomechanical behavior of adhesive cement layer and periodontal tissues on the restored teeth with zirconia RBFDPs using three-kinds of framework design: 3D FEA study
To investigate stress and strain concentrations on resin-bonded fixed dental prostheses (RBFDPs) frameworks of different design using finite element analysis. A human dry skull was scanned and models were produced using three-dimensional printer. After abutment preparation, three frameworks, including a three-unit RBFDP, and two-unit cantilevered RBFDPs using #21 and #23 for the abutment tooth, were fabricated. Scanned data were subtracted to define boundary of each structure. Occlusal force (200N) was loaded at 45° to long axis of the pontic. The distributions of shear stress and principal strain in the RBFDP models were measured to evaluate the risk for framework-debonding from the abutment teeth and the impact on periodontal tissue. The percentage voxels with shear stress >11MPa in adhesive cement layer of three-unit RBFDP using #21 and #23 were 4.16% and 2.25%, respectively; in two-unit cantilevered RBFDPs, it was 19.25% using #21, and 23.4% using #23. The maximum principal strain on periodontal ligaments in two-unit cantilevered RBFDPs using #21 was the largest, and smallest in the three-unit RBFDP. The maximum principal strain in framework was largest in the two-unit cantilevered RBFDP using #23, and smallest in the three-unit RBFDP. The risk for framework-debonding in three-unit RBFDPs was substantially lower than that in two-unit RBFDPs. In difficult cases with indication for three-unit RBFDPs, two-unit cantilever design using the canine would be more advantageous for preservation of periodontal tissue, while for risk of framework-debonding, the design using the central incisor would be more advantageous.
- 1 April 2018
- Published by Japan Prosthodontic Society in Journal of Prosthodontic Research
- Vol. 62 (2) , 227-233
Biomechanical behavior of adhesive cement layer and periodontal tissues on the restored teeth with zirconia RBFDPs using three-kinds of framework design: 3D FEA study
To investigate stress and strain concentrations on resin-bonded fixed dental prostheses (RBFDPs) frameworks of different design using finite element analysis. A human dry skull was scanned and models were produced using three-dimensional printer. After abutment preparation, three frameworks, including a three-unit RBFDP, and two-unit cantilevered RBFDPs using #21 and #23 for the abutment tooth, were fabricated. Scanned data were subtracted to define boundary of each structure. Occlusal force (200N) was loaded at 45° to long axis of the pontic. The distributions of shear stress and principal strain in the RBFDP models were measured to evaluate the risk for framework-debonding from the abutment teeth and the impact on periodontal tissue. The percentage voxels with shear stress >11MPa in adhesive cement layer of three-unit RBFDP using #21 and #23 were 4.16% and 2.25%, respectively; in two-unit cantilevered RBFDPs, it was 19.25% using #21, and 23.4% using #23. The maximum principal strain on periodontal ligaments in two-unit cantilevered RBFDPs using #21 was the largest, and smallest in the three-unit RBFDP. The maximum principal strain in framework was largest in the two-unit cantilevered RBFDP using #23, and smallest in the three-unit RBFDP. The risk for framework-debonding in three-unit RBFDPs was substantially lower than that in two-unit RBFDPs. In difficult cases with indication for three-unit RBFDPs, two-unit cantilever design using the canine would be more advantageous for preservation of periodontal tissue, while for risk of framework-debonding, the design using the central incisor would be more advantageous.
- Open Access
- 1 January 2017
- Published by Asian Pacific Journal of Dentistry in Asian Pacific Journal of Dentistry
- Vol. 17 (1) , 1-7
The influence of the framework thickness on surface strain of the 3-unit zirconia resin-bonded fixed dental prostheses under the functional loading
Purpose: The purpose of the present study was to optimize the form of a resin-bonded fixed dental prosthesis (RBFDP) frame by preparing various framework designs using ceria-stabilized tetragonal zirconia/alumina nano composite (Ce-TZP/Al) materials.Materials and Methods: Six types of frameworks were fabricated as follows: 0.8-mm-thick metal (0.8M), 0.8-mm- and 0.5-mm-thick yttria-stabilized tetragonal zirconia polycrystal frameworks (0.8Y, 0.5Y) and 0.8- mm-, 0.5 -mm- and 0.3-mm- thick Ce-TZP/Al frameworks (0.8C, 0.5C, 0.3C). A load up to 200 N crosshead speed of 1.0 mm/min was applied to center of the palatal surfaces of the pontic of the RBFDPs by a universal testing machine. The strains of the RBFDPs during loading were measured and recorded by sensor interfaces. Then, the magnitudes of the maximum and minimum principal strain were calculated. A two-way analysis of variance (ANOVA) and a t-test with Bonferroni correction were used for the statistical analysis of strain, with a significance level at α = 0.05.Results: In the canine, the magnitudes of the maximum principal strain of 0.8M were significantly higher than those in group 0.8Y. There were no significant differences among the 0.3C, 0.5Y, and 0.8M groups.Conclusion: This report suggested that Ce-TZP/Al can improve the long-term prognosis of resin bonded fixed dental prostheses in the oral cavity due to its desirable mechanical and hydrothermal degradation-resistant characteristics, enabling the design of a resin bonded fixed dental prosthesis frame with a thickness of 0.3 mm.
- 1 January 2017
- Published by Asian Pacific Journal of Dentistry in Asian Pacific Journal of Dentistry
- Vol. 17 (1) , 1-7
Open AccessThe influence of the framework thickness on surface strain of the 3-unit zirconia resin-bonded fixed dental prostheses under the functional loading
Purpose: The purpose of the present study was to optimize the form of a resin-bonded fixed dental prosthesis (RBFDP) frame by preparing various framework designs using ceria-stabilized tetragonal zirconia/alumina nano composite (Ce-TZP/Al) materials.Materials and Methods: Six types of frameworks were fabricated as follows: 0.8-mm-thick metal (0.8M), 0.8-mm- and 0.5-mm-thick yttria-stabilized tetragonal zirconia polycrystal frameworks (0.8Y, 0.5Y) and 0.8- mm-, 0.5 -mm- and 0.3-mm- thick Ce-TZP/Al frameworks (0.8C, 0.5C, 0.3C). A load up to 200 N crosshead speed of 1.0 mm/min was applied to center of the palatal surfaces of the pontic of the RBFDPs by a universal testing machine. The strains of the RBFDPs during loading were measured and recorded by sensor interfaces. Then, the magnitudes of the maximum and minimum principal strain were calculated. A two-way analysis of variance (ANOVA) and a t-test with Bonferroni correction were used for the statistical analysis of strain, with a significance level at α = 0.05.Results: In the canine, the magnitudes of the maximum principal strain of 0.8M were significantly higher than those in group 0.8Y. There were no significant differences among the 0.3C, 0.5Y, and 0.8M groups.Conclusion: This report suggested that Ce-TZP/Al can improve the long-term prognosis of resin bonded fixed dental prostheses in the oral cavity due to its desirable mechanical and hydrothermal degradation-resistant characteristics, enabling the design of a resin bonded fixed dental prosthesis frame with a thickness of 0.3 mm.