Chenxi Xiu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chenxi Xiu has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Xihua Chu
School of Civil Engineering, Wuhan University, Wuhan, China
3 shared publications Lei Zhou
2 shared publications- Ao Mei
State Key Laboratory of Mountain Bridge and Tunnel Engineering, Chongqing Jiaotong University, Chongqing 400074, China
1 shared publication Bo Li
1 shared publication- Ji Wan
School of Civil Engineering, Wuhan University, Wuhan, China
1 shared publication Jiao Wang
School of Mechanics and Engineering Southwest Jiaotong University Chengdu China
1 shared publication
Latest Publications
- 1 August 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (8)
Study of turbulence intermittency in unstable atmospheric surface layer and its effect on saltation sand motion based on wavelet transform
Turbulence in the atmospheric surface layer, especially in deserts and semi-arid regions, significantly affects sand movement. In unstable stratification, turbulence exhibits complex intermittency, complicating its impact on saltation. This study uses wavelet transform analysis to examine the effects of turbulence intermittency in unstable stratification on saltation. Our analysis reveals that in unstable stratification, the energy distribution of turbulence is more dispersed, the intermittent characteristics are more significant, and the intermittent burst duration of streamwise turbulence is longer, while the vertical intermittent burst duration is shorter. The fitting formulas of the energy ratio and stratification stability of the streamwise wind speed, vertical wind speed, and temperature at different frequencies are given. In addition, there is a complex nonlinear relationship between stratification stability and friction velocity on saltation. In unstable stratification, the critical wind speed required for saltation is higher than that of near-neutral, and the jumping speed and horizontal transport are weakened. Moreover, the coherence between wind speed and saltation flux increases significantly at low frequency with the increase in instability, indicating that large-scale motion plays a key role in saltation under these conditions. The more unstable the stratification is, the more obvious the phase difference fluctuation of the low frequency part is, and the more unfavorable the formation of stable saltation sand conditions. This study reveals the turbulence intermittently and its complex effects on sand particle movement in unstable stratification, which is of great significance for predicting and controlling dust storms, land desertification, and soil erosion.
- 1 August 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (8)
Study of turbulence intermittency in unstable atmospheric surface layer and its effect on saltation sand motion based on wavelet transform
Turbulence in the atmospheric surface layer, especially in deserts and semi-arid regions, significantly affects sand movement. In unstable stratification, turbulence exhibits complex intermittency, complicating its impact on saltation. This study uses wavelet transform analysis to examine the effects of turbulence intermittency in unstable stratification on saltation. Our analysis reveals that in unstable stratification, the energy distribution of turbulence is more dispersed, the intermittent characteristics are more significant, and the intermittent burst duration of streamwise turbulence is longer, while the vertical intermittent burst duration is shorter. The fitting formulas of the energy ratio and stratification stability of the streamwise wind speed, vertical wind speed, and temperature at different frequencies are given. In addition, there is a complex nonlinear relationship between stratification stability and friction velocity on saltation. In unstable stratification, the critical wind speed required for saltation is higher than that of near-neutral, and the jumping speed and horizontal transport are weakened. Moreover, the coherence between wind speed and saltation flux increases significantly at low frequency with the increase in instability, indicating that large-scale motion plays a key role in saltation under these conditions. The more unstable the stratification is, the more obvious the phase difference fluctuation of the low frequency part is, and the more unfavorable the formation of stable saltation sand conditions. This study reveals the turbulence intermittently and its complex effects on sand particle movement in unstable stratification, which is of great significance for predicting and controlling dust storms, land desertification, and soil erosion.
- Open Access
- 19 August 2022
- Published by SAGE Publications in Advances in Mechanical Engineering
- Vol. 14 (8)
Study on dispersion and wave velocity in 2D elliptic granular crystals by a micromechanics-based micromorphic model
This study considers two-dimensional elliptic granular crystals respectively with different aspect ratios. Using a micromechanics-based micromorphic model, macroscopic micromorphic constitutive modulus tensors of elliptic granular crystals are obtained. Two modes of Taylor expansion of relative displacements are used to establish contact relation between particles. This study obtains micromorphic transverse-rotational and longitudinal waves. Obvious dispersions of micromorphic waves are given in 2D elliptic granular crystals. With increase of aspect ratio, width of frequency band gap increases when wave propagates along [ ] direction but decreases when wave propagates along [ ] direction. Two modes of Taylor expansion of relative displacements only have influence on dispersions and frequency band gap of transverse-rotational waves. Velocities of longitudinal and transverse-rotational waves first decrease to zero, keep zero for a range of frequency and then increase to a larger wave velocity with increase of frequency for different aspect ratios. The situation with a larger aspect ratio leads to larger transverse-rotational and longitudinal velocities, and ratio between transverse-rotational and longitudinal velocities decreases from 0.7 to 0.59, when wave propagates along [ ] direction. However, it leads to smaller transverse-rotational and longitudinal velocities, and ratio between two velocities decreases from 0.88 to 0.56, when wave propagates along [ ] direction.
- 19 August 2022
- Published by SAGE Publications in Advances in Mechanical Engineering
- Vol. 14 (8)
Open AccessStudy on dispersion and wave velocity in 2D elliptic granular crystals by a micromechanics-based micromorphic model
This study considers two-dimensional elliptic granular crystals respectively with different aspect ratios. Using a micromechanics-based micromorphic model, macroscopic micromorphic constitutive modulus tensors of elliptic granular crystals are obtained. Two modes of Taylor expansion of relative displacements are used to establish contact relation between particles. This study obtains micromorphic transverse-rotational and longitudinal waves. Obvious dispersions of micromorphic waves are given in 2D elliptic granular crystals. With increase of aspect ratio, width of frequency band gap increases when wave propagates along [ ] direction but decreases when wave propagates along [ ] direction. Two modes of Taylor expansion of relative displacements only have influence on dispersions and frequency band gap of transverse-rotational waves. Velocities of longitudinal and transverse-rotational waves first decrease to zero, keep zero for a range of frequency and then increase to a larger wave velocity with increase of frequency for different aspect ratios. The situation with a larger aspect ratio leads to larger transverse-rotational and longitudinal velocities, and ratio between transverse-rotational and longitudinal velocities decreases from 0.7 to 0.59, when wave propagates along [ ] direction. However, it leads to smaller transverse-rotational and longitudinal velocities, and ratio between two velocities decreases from 0.88 to 0.56, when wave propagates along [ ] direction.
- 28 April 2021
- Published by Wiley in International Journal for Numerical Methods in Engineering
- Vol. 122 (17) , 4507-4540
Numerical simulation of impulse waves in Cosserat media based on a time‐discontinuous Galerkin finite element method
The time‐discontinuous Galerkin finite element method (TDGFEM) has advantages in reducing spurious numerical oscillations and capturing discontinuities of solutions in space for high‐frequency dynamical problems. This article extends TDGFEM into Cosserat media to focus on impulse wave propagations, involving rotational wave and effects of microstructures. The Cosserat continuum theory contains additional rotational degrees of freedom, leading to Cosserat compressive (P), shear (S), and rotational (R) waves. Therefore, three Cosserat wave propagations are simulated by TDGFEM under impulse loads in this article. Different orders (P1–P3) of temporal shape functions are presented for Cosserat nodal unknown vectors, leading to different matrix equations for TDGFEM. One‐dimensional numerical results show capacity and efficiency of TDGFEM simulating Cosserat impulse wave propagations. Analyses about time step, mesh density and accuracy of TDGFEM are given in one‐dimensional examples. Results simulated by three methods with artificial damping are compared with those by TDGFEM, which shows a higher efficiency for TDGFEM. Two‐dimensional results present the propagation characteristics of Cosserat impulse P, S, and R waves, and velocities of Cosserat P, S, and R waves are simulated by TDGFEM. The characteristic length and Cosserat shear modulus have a major influence on impulse S and R wave propagations.
- 28 April 2021
- Published by Wiley in International Journal for Numerical Methods in Engineering
- Vol. 122 (17) , 4507-4540
Numerical simulation of impulse waves in Cosserat media based on a time‐discontinuous Galerkin finite element method
The time‐discontinuous Galerkin finite element method (TDGFEM) has advantages in reducing spurious numerical oscillations and capturing discontinuities of solutions in space for high‐frequency dynamical problems. This article extends TDGFEM into Cosserat media to focus on impulse wave propagations, involving rotational wave and effects of microstructures. The Cosserat continuum theory contains additional rotational degrees of freedom, leading to Cosserat compressive (P), shear (S), and rotational (R) waves. Therefore, three Cosserat wave propagations are simulated by TDGFEM under impulse loads in this article. Different orders (P1–P3) of temporal shape functions are presented for Cosserat nodal unknown vectors, leading to different matrix equations for TDGFEM. One‐dimensional numerical results show capacity and efficiency of TDGFEM simulating Cosserat impulse wave propagations. Analyses about time step, mesh density and accuracy of TDGFEM are given in one‐dimensional examples. Results simulated by three methods with artificial damping are compared with those by TDGFEM, which shows a higher efficiency for TDGFEM. Two‐dimensional results present the propagation characteristics of Cosserat impulse P, S, and R waves, and velocities of Cosserat P, S, and R waves are simulated by TDGFEM. The characteristic length and Cosserat shear modulus have a major influence on impulse S and R wave propagations.
- 22 December 2019
- Published by Wiley in International Journal for Numerical and Analytical Methods in Geomechanics
- Vol. 44 (4) , 484-515
A micromorphic elastoplastic model and finite element simulation on failure behaviors of granular materials
Summary: One of the purposes in this study is to develop a modified micromorphic continuum model for granular materials on the basis of a micromechanics approach. A symmetric curvature tensor is proposed in this model, and a symmetric couple stress tensor is derived conjugating the symmetric curvature tensor. In addition, a correct derivation is presented to obtain the symmetric stress tensor conjugated with the symmetric strain tensor. The modified model provides a complete deformation mode for granular materials by considering the decomposition for motions (displacement and rotation) of particles. Consequently, the macroscopic constitutive relationships and constitutive moduli are derived in expressions of the microstructural information. Furthermore, the balance equations and boundary conditions are obtained for the modified micromorphic model. By considering the extended Drucker‐Prager yield criterion, the micromorphic elastoplastic model is developed. Another purpose of this study is to derive the finite element formulation for the developed micromorphic elastoplastic model. Based on the ABAQUS user element (UEL) interface, numerical simulations investigated the load‐displacement relationship and the strain localization behavior of granular materials and investigated the influence of microscopic parameters in the micromorphic model on these macroscopic mechanical responses. Numerical results illustrate the presented model's capability of simulating the strain‐softening and strain localization behaviors, and the capability of considering the influence of microstructural information on the macroscopic mechanical behaviors of granular materials.
- 22 December 2019
- Published by Wiley in International Journal for Numerical and Analytical Methods in Geomechanics
- Vol. 44 (4) , 484-515
A micromorphic elastoplastic model and finite element simulation on failure behaviors of granular materials
Summary: One of the purposes in this study is to develop a modified micromorphic continuum model for granular materials on the basis of a micromechanics approach. A symmetric curvature tensor is proposed in this model, and a symmetric couple stress tensor is derived conjugating the symmetric curvature tensor. In addition, a correct derivation is presented to obtain the symmetric stress tensor conjugated with the symmetric strain tensor. The modified model provides a complete deformation mode for granular materials by considering the decomposition for motions (displacement and rotation) of particles. Consequently, the macroscopic constitutive relationships and constitutive moduli are derived in expressions of the microstructural information. Furthermore, the balance equations and boundary conditions are obtained for the modified micromorphic model. By considering the extended Drucker‐Prager yield criterion, the micromorphic elastoplastic model is developed. Another purpose of this study is to derive the finite element formulation for the developed micromorphic elastoplastic model. Based on the ABAQUS user element (UEL) interface, numerical simulations investigated the load‐displacement relationship and the strain localization behavior of granular materials and investigated the influence of microscopic parameters in the micromorphic model on these macroscopic mechanical responses. Numerical results illustrate the presented model's capability of simulating the strain‐softening and strain localization behaviors, and the capability of considering the influence of microstructural information on the macroscopic mechanical behaviors of granular materials.
- Open Access
A modified micromorphic model based on micromechanics for granular materials
The purpose of this study is to propose a modified micromorphic continuum model for granular materials based on a micromechanics approach. In this model, Cauchy stress and the couple stress are symmetric conjugated with the symmetric strain and the symmetric curvature respectively, and the relative stress measures are asymmetric conjugated with the asymmetric relative strain measures. This modified micromorphic model considers a continuum material point as a granular volume element whose deformation behavior is influenced by the translation and the rotation of particles. And this study proposes that the microscopic actual motion is decomposed into a macroscopic motion and a fluctuation between the macro-micro motion. Based on this decomposition, the micromorphic constitutive relationships are derived for granular materials. In the constitutive relationships, the macroscopic constitutive relationships are first-order because of the introduce of the independent rotation of particle instead of the second-order micro-deformation gradient. Furthermore, the complex constitutive moduli in the micromorphic model are obtained in the expressions of the microstructural information such as the contact stiffness and the internal length.
Open AccessA modified micromorphic model based on micromechanics for granular materials
The purpose of this study is to propose a modified micromorphic continuum model for granular materials based on a micromechanics approach. In this model, Cauchy stress and the couple stress are symmetric conjugated with the symmetric strain and the symmetric curvature respectively, and the relative stress measures are asymmetric conjugated with the asymmetric relative strain measures. This modified micromorphic model considers a continuum material point as a granular volume element whose deformation behavior is influenced by the translation and the rotation of particles. And this study proposes that the microscopic actual motion is decomposed into a macroscopic motion and a fluctuation between the macro-micro motion. Based on this decomposition, the micromorphic constitutive relationships are derived for granular materials. In the constitutive relationships, the macroscopic constitutive relationships are first-order because of the introduce of the independent rotation of particle instead of the second-order micro-deformation gradient. Furthermore, the complex constitutive moduli in the micromorphic model are obtained in the expressions of the microstructural information such as the contact stiffness and the internal length.