MJMilos Jecmenica

Milos Jecmenica

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Milos Jecmenica has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • INFLUENCE OF ROTOR WINDING CONSTRUCTION OF MULTIPHASE INDUCTION MACHINE ON THE SURFACE LOSSES

    by Mihailo Tanasić, Bogdan Brković, Miloš Ječmenica

    This paper analyses the influence of construction of rotor winding of multiphase induction machine on the rotor harmonic losses. These include additional surface losses in the rotor bars and core caused by higher spatial harmonics of the stator magnetomotive force. Significant values of these losses can lead to local overheating and indicate an increased value of torque ripple; it is therefore of interest to limit their value. This can be achieved by an adequate selection of the number and shape of the rotor rods. In the paper, the influence of rotor winding construction on the additional surface losses is examined. A number of different stator winding topologies with different stator current waveforms is included in the analysis. Finite element analysis is conducted to obtain precise calculation of field distribution and losses for individual spatial harmonics. Based on the obtained results, suitable combinations of stator winding distribution and rotor design are identified. The results of this analysis and the developed software solution for the calculation of surface losses can be of great use in the process of designing multiphase electric machines

  • From the Idea to the Realization of the Wind Farm - Overview of the Administrative Procedure and Legal Regulations in the Republic of Serbia

    by Elektrotehnički fakultet Univerzitet u Beogradu, Miloš Ječmenica, Nikola Grbić

    The paper presents a typical course of realization of a wind park project in the Republic of Serbia. Through a review of the legal regulations and administrative procedures in the process of obtaining the necessery permits and consents, as well as the preparation of all stages of project-technical documentation, the flow of activities that must be carried out on the way from the idea to obtaining a use permit and connecting the wind farm to the power grid is presented in detail. On the example of a wind farm project with a total installed capacity of over 10 MW, an analysis of the administrative procedure, legal regulations and technical requirements was carried out with an explanation of each activity during the realization of this project. A methodology was formed that can be used for a more thorough assessment of the scope and complexity of activities during the development of such projects, including photovoltaic power plants. Accordingly, it is desirable to use software tools for project monitoring and management. It is expected that this paper will be useful in considering the necessary activities for the development of such and similar projects in the field of renewable energy sources.

  • Techno-Economic Analysis of the Wind Farm Project

    by Miloš Ječmenica, Đorđe Lazović

    In addition to fulfilling the conditions for choosing the optimal location, such as geographical location, meteorological parameters, as well as conditions for connection to the power grid, the techno-economic analysis represents an important aspect when planning, developing and exploiting projects in the field of renewable energy sources. Concretely, on the example of a wind park in the Republic of Serbia, a techno-economic analysis with basic indicators of the profitability and justification of the investment is presented. Through these indicators, an investment analysis of a wind park with a total installed capacity of 150 MW connected to the transmission network was carried out. The goal of the conducted analysis is to obtain basic financial indicators that can be important when choosing a location, planning an investment and sustainable exploitation of this and similar power projects.


  • Open Access

    Calculation of Rotor Harmonic Losses in Multiphase Induction Machines

    by Bogdan Brkovic, Milos Jecmenica

    The topic of this paper is the determination of rotor harmonic losses in multiphase machines. Specifically, harmonic losses occur in the rotor winding and core due to higher-order spatial harmonics of the flux density. This phenomenon influences machine parameters and overall performance and increases temperature rise in parts of the rotor. The flux density distribution is determined by the stator magnetomotive force harmonic content, which is directly related to the winding distribution. A cage-rotor asymmetrical six-phase induction machine is selected for this case study. An analysis of different stator winding topologies and their influence on harmonic losses is presented. A finite element-based method for calculating the contribution of individual stator magnetomotive force harmonics to the rotor losses is developed and described in the paper. The analysis includes scenarios with different phase current waveforms to emphasize the issues specific to the asymmetrical six-phase machine. It is found that the magnetomotive force components generated by non-torque-producing current components contribute significantly to harmonic losses. The obtained results can represent a foundation for optimal stator winding topology selection. This work is intended to motivate the development of new and the modification of existing models to properly include rotor harmonic losses during the design, performance prediction, and control of multiphase machines.


  • Open Access

    Saturated VSD model of a six‐phase induction machine

    by Bogdan Mihailo Brkovic, Milos Jecmenica, Emil Levi, Zoran M. Lazarevic

    In this study, a saturated model of an asymmetrical six‐phase induction machine is presented. The model is based on the vector space decomposition approach, and it includes main and leakage flux saturation, as well as the mutual coupling between orthogonal planes while using the Gamma equivalent circuit approach. The accuracy of the proposed model in unbalanced operating modes that are characteristic for multiphase machines, such as post‐fault and power‐sharing operation, makes it advantageous compared to existing models. The model is developed assuming that the machine operates in asymmetrical conditions and that, therefore, there is fundamental frequency excitation in both planes. The inter‐plane coupling effect is examined using finite element analysis and an experimental procedure for its quantification is developed. The model is verified by comparison with the experimental results obtained from a prototype asymmetrical six‐phase induction machine, and its advantages compared to existing models are emphasised.


  • Open Access

    Interplane cross‐saturation in multiphase machines

    by Milos Jecmenica, Bogdan Brkovic, Emil Levi, Zoran Lazarevic

    The use of electrical machines in electric vehicles and high‐power drives frequently requires multiphase machines and multiphase inverters. While appropriate mathematical models under the linear magnetic conditions are readily available for multiphase machines, the same cannot be said for the models of the saturated multiphase machines. This study examines the saturation in an asymmetrical six‐phase induction machine under different supply conditions and addresses the applicability of the existing saturated three‐phase machine models for the representation of saturated multiphase machines. Specifically, the mutual coupling between different sequence planes in the vector space decomposed model under saturated conditions is analysed. The study relies on analytical considerations, finite element analysis and experimental results. It is shown that the saturation of the main flux path is influenced by the current components in the orthogonal (non‐fundamental) sequence plane. This implies the need to develop new multiphase machine models which take this effect into account.


  • Online temperature monitoring of a grid connected induction motor

    by Alaulddin A.H. Albla, Bogdan M. Brkovic, Milos M. Jecmenica, Zoran M. Lazarevic