Ignacio Antón
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ignacio Antón has a total of 169 co-authors. Here are the top co-authors by number of shared publications:
- César Domínguez
Instituto de Energía Solar Universidad Politécnica de Madrid 28040 Madrid Spain
38 shared publications - Stephen Askins
Instituto de Energía Solar, Universidad Politécnica de Madrid, Ciudad Universitaria 28040, Madrid, Spain
32 shared publications G. Sala
Instituto de Energía Solar, E.T.S.I.T., Universidad Politécnica de Madrid, Ciudad Universitaria 28040, Madrid, Spain
28 shared publicationsGabriel Sala
Instituto de Energía Solar, Universidad Politécnica de Madrid, Ciudad Universitaria 28040, Madrid, Spain
25 shared publications- Rebeca Herrero
Instituto de Energía Solar, Universidad Politécnica de Madrid, Madrid, Spain
20 shared publications - Marta Victoria
Aarhus University
16 shared publications
Latest Publications
- Open Access
- 24 March 2026
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 34 (6) , 744-757
Testing VIPV Curved Modules: Methods and Challenges
Vehicle‐integrated photovoltaics (VIPV) offer a promising pathway to increase electric‐vehicle autonomy, yet their characterization is challenged by curved geometries and non‐uniform irradiance conditions. This work presents and validates a comprehensive methodology for the characterization of curved photovoltaic modules. Standard test condition (STC) I–V curves and relative angular response (RAR) measurements are performed on a set of one‐dimensional cylindrical modules with varying curvature radii as well as on a commercial two‐dimensional curved VIPV module. Outdoor measurements using a dual‐axis programmable solar tracker are systematically compared with indoor measurements obtained using a collimated‐light solar simulator. Results demonstrate excellent agreement between indoor and outdoor STC I–V curves, with deviations below 1.5%, confirming the suitability of collimated solar simulation for rating curved PV modules. The study further analyzes the impact of curvature, temperature, and diffuse irradiance on angular response and proposes best practices to reduce measurement dispersion. These findings provide a robust experimental foundation for future standardization of VIPV characterization procedures.
- 24 March 2026
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 34 (6) , 744-757
Open AccessTesting VIPV Curved Modules: Methods and Challenges
Vehicle‐integrated photovoltaics (VIPV) offer a promising pathway to increase electric‐vehicle autonomy, yet their characterization is challenged by curved geometries and non‐uniform irradiance conditions. This work presents and validates a comprehensive methodology for the characterization of curved photovoltaic modules. Standard test condition (STC) I–V curves and relative angular response (RAR) measurements are performed on a set of one‐dimensional cylindrical modules with varying curvature radii as well as on a commercial two‐dimensional curved VIPV module. Outdoor measurements using a dual‐axis programmable solar tracker are systematically compared with indoor measurements obtained using a collimated‐light solar simulator. Results demonstrate excellent agreement between indoor and outdoor STC I–V curves, with deviations below 1.5%, confirming the suitability of collimated solar simulation for rating curved PV modules. The study further analyzes the impact of curvature, temperature, and diffuse irradiance on angular response and proposes best practices to reduce measurement dispersion. These findings provide a robust experimental foundation for future standardization of VIPV characterization procedures.
- Open Access
- 10 February 2026
- Published by Elsevier in SSRN Electronic Journal
Evaluating Power-to-Heat-to-Power Storage Potential in Wind- and Solar-Dominated Energy Markets
This study assesses the role of Power-to-Heat-to-Power Storage (PHPS) systems, also known as Carnot batteries, in the national energy system of a wind-dominated (Denmark) and a solar-dominated (Spain) region. Using the open-source PyPSA framework, we model sector-coupled electricity and heating systems, and evaluate individual (decentralized) and district (centralized) configurations for heat provision at residential level, with and without PHPS waste heat recovery. The results show that PHPS contribution is most pronounced in wind-dominated systems with decentralized heating, where PHPS emerges as the dominant storage option. PHPS also plays a significant role in other configurations, including wind-dominated regions with centralized heating and solar-dominated regions with decentralized heating. Across all scenarios, waste heat recovery proves essential to enhancing PHPS competitiveness, in some cases enabling it to partially displace lithium-ion batteries. Sensitivity analysis highlights that PHPS viability depends primarily on achieving low energy capacity costs (less than approximately 10 €/kWh) and maintaining reasonable heat-to-power conversion efficiencies. Overall, while PHPS complements existing storage technologies by providing dispatchable electricity and heat, its potential adoption is highly context-dependent, influenced by climate, heating system configuration, and competing storage costs.
- 10 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessEvaluating Power-to-Heat-to-Power Storage Potential in Wind- and Solar-Dominated Energy Markets
This study assesses the role of Power-to-Heat-to-Power Storage (PHPS) systems, also known as Carnot batteries, in the national energy system of a wind-dominated (Denmark) and a solar-dominated (Spain) region. Using the open-source PyPSA framework, we model sector-coupled electricity and heating systems, and evaluate individual (decentralized) and district (centralized) configurations for heat provision at residential level, with and without PHPS waste heat recovery. The results show that PHPS contribution is most pronounced in wind-dominated systems with decentralized heating, where PHPS emerges as the dominant storage option. PHPS also plays a significant role in other configurations, including wind-dominated regions with centralized heating and solar-dominated regions with decentralized heating. Across all scenarios, waste heat recovery proves essential to enhancing PHPS competitiveness, in some cases enabling it to partially displace lithium-ion batteries. Sensitivity analysis highlights that PHPS viability depends primarily on achieving low energy capacity costs (less than approximately 10 €/kWh) and maintaining reasonable heat-to-power conversion efficiencies. Overall, while PHPS complements existing storage technologies by providing dispatchable electricity and heat, its potential adoption is highly context-dependent, influenced by climate, heating system configuration, and competing storage costs.
- Open Access
- 16 January 2026
- Published by EDP Sciences in EPJ Photovoltaics
- Vol. 17, 2
Vehicle integrated photovoltaics module architecture optimization under dynamic shading
Vehicle Integrated Photovoltaics (VIPV) can extend driving range, reduce charging needs, and ease grid demand in electric vehicles. However, unlike conventional PV systems, VIPV modules operate under non-uniform irradiance and dynamic (often partial) shading conditions. Cell interconnection topologies, the module architecture, and strategies such as Distributed Maximum Power Point Tracking (DMPPT) influence the performance of the modules under these specific conditions. This study evaluates the performance of shingled-cell modules under real dynamic urban shading on a clear day, using image-based data and electrical simulations with different MPPT strategies. Eight configurations were assessed, combining two cell orientations (horizontal and vertical), two interconnection types (series and total-cross-tied, TCT), and two layouts (single large module, SLM, and six mini-modules, 6 MM). Classification method for both the driving environment and shading profiles shape are proposed on this paper. The findings resulting from this work revealed that shadows are uniformly distributed over the vehicle's roof while in motion on a long enough period (∼17 min), the orientation of cells is irrelevant, except that it affects the number of available bypass diodes, and using a distributed module strategy presents improvements in the PV system's performance thanks to its resilience to partial shading.
- 16 January 2026
- Published by EDP Sciences in EPJ Photovoltaics
- Vol. 17, 2
Open AccessVehicle integrated photovoltaics module architecture optimization under dynamic shading
Vehicle Integrated Photovoltaics (VIPV) can extend driving range, reduce charging needs, and ease grid demand in electric vehicles. However, unlike conventional PV systems, VIPV modules operate under non-uniform irradiance and dynamic (often partial) shading conditions. Cell interconnection topologies, the module architecture, and strategies such as Distributed Maximum Power Point Tracking (DMPPT) influence the performance of the modules under these specific conditions. This study evaluates the performance of shingled-cell modules under real dynamic urban shading on a clear day, using image-based data and electrical simulations with different MPPT strategies. Eight configurations were assessed, combining two cell orientations (horizontal and vertical), two interconnection types (series and total-cross-tied, TCT), and two layouts (single large module, SLM, and six mini-modules, 6 MM). Classification method for both the driving environment and shading profiles shape are proposed on this paper. The findings resulting from this work revealed that shadows are uniformly distributed over the vehicle's roof while in motion on a long enough period (∼17 min), the orientation of cells is irrelevant, except that it affects the number of available bypass diodes, and using a distributed module strategy presents improvements in the PV system's performance thanks to its resilience to partial shading.
- 28 September 2023
- Published by Optica Publishing Group in Optics Express
- Vol. 31 (21) , 34240-34251
Estimation of solar resource for vehicle-integrated photovoltaics in urban environments using image-based shade detection
Vehicle-Integrated Photovoltaics (VIPV) in urban environments face challenges in accurately estimating solar resource due to dynamic shading effects. This research presents a methodology for evaluating VIPV solar resource by analyzing imagery and detecting shade conditions along driving routes. Street image mapping services and obstacle detection algorithms are utilized to determine the shaded or sunny condition of the vehicle at each point. The approach enables the calculation of solar irradiance, considering direct and diffuse components, and identifies energetically optimal driving routes. The methodology provides valuable insights for optimizing MPPT algorithms and assessing VIPV performance in urban settings. It offers a practical tool for sustainable mobility and renewable energy integration.
- 28 September 2023
- Published by Optica Publishing Group in Optics Express
- Vol. 31 (21) , 34240-34251
Estimation of solar resource for vehicle-integrated photovoltaics in urban environments using image-based shade detection
Vehicle-Integrated Photovoltaics (VIPV) in urban environments face challenges in accurately estimating solar resource due to dynamic shading effects. This research presents a methodology for evaluating VIPV solar resource by analyzing imagery and detecting shade conditions along driving routes. Street image mapping services and obstacle detection algorithms are utilized to determine the shaded or sunny condition of the vehicle at each point. The approach enables the calculation of solar irradiance, considering direct and diffuse components, and identifies energetically optimal driving routes. The methodology provides valuable insights for optimizing MPPT algorithms and assessing VIPV performance in urban settings. It offers a practical tool for sustainable mobility and renewable energy integration.
- Open Access
Integrated Micro‐Scale Concentrating Photovoltaics: A Scalable Path Toward High‐Efficiency, Low‐Cost Solar Power
The global energy market is seeing increases in the electricity demand of a couple of percentage points annually. The photovoltaic (PV) industry is also growing rapidly every year. One of the PV technologies is concentrator photovoltaics (CPV). CPV uses high‐efficiency multijunction solar cells and optics to concentrate sunlight, thereby significantly reducing the amount of semiconductor material needed. Yet, due to the high upfont manufacturing cost of CPV, it currently does not offer a competitive price against silicon PV. With this a new branch is introduced to the industry, micro‐CPV, which can be broadly explained as the miniaturization of the solar cells and optical components. The motivation for micro‐CPV is lowering the cost by decreasing the material volume and enabling new system architectures and high‐throughput manufacturing methods, while still maintaining high electrical efficiencies, taking advantage of a lower thermal load, shorter optical paths, lower resistive losses, and lower material volumes. Herein, a comprehensive review of the technological advances is presented, key synergies between micro‐CPV and other industries sharing similar challenges are identified, exemplified by micro‐light emitting diodes display manufacturing. New assembly process development in these industries will facilitate commercial adoption of micro‐CPV with continued miniaturization while driving down the cost.
Open AccessIntegrated Micro‐Scale Concentrating Photovoltaics: A Scalable Path Toward High‐Efficiency, Low‐Cost Solar Power
The global energy market is seeing increases in the electricity demand of a couple of percentage points annually. The photovoltaic (PV) industry is also growing rapidly every year. One of the PV technologies is concentrator photovoltaics (CPV). CPV uses high‐efficiency multijunction solar cells and optics to concentrate sunlight, thereby significantly reducing the amount of semiconductor material needed. Yet, due to the high upfont manufacturing cost of CPV, it currently does not offer a competitive price against silicon PV. With this a new branch is introduced to the industry, micro‐CPV, which can be broadly explained as the miniaturization of the solar cells and optical components. The motivation for micro‐CPV is lowering the cost by decreasing the material volume and enabling new system architectures and high‐throughput manufacturing methods, while still maintaining high electrical efficiencies, taking advantage of a lower thermal load, shorter optical paths, lower resistive losses, and lower material volumes. Herein, a comprehensive review of the technological advances is presented, key synergies between micro‐CPV and other industries sharing similar challenges are identified, exemplified by micro‐light emitting diodes display manufacturing. New assembly process development in these industries will facilitate commercial adoption of micro‐CPV with continued miniaturization while driving down the cost.
- Open Access
- 11 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
A Horizontal Single-Axis Tracker Mock-Up to Quickly Assess the Influence of Geometrical Factors on Bifacial Energy Gain
Bifacial photovoltaic modules on horizontal single-axis trackers have become the mainstream type of utility-scale solar power plant. Their optimal design involves many trade-offs between different geometric properties, which are difficult to capture via modeling tools or underestimated by research-scale test beds. This article presents the design and preliminary demonstration of a scaled test bed for monitoring irradiance non-uniformity on both sides of the panel and realistically assess the influence of geometrical parameters on the bifacial energy gain achieved. The mock-up developed includes an open-loop control system with back-tracking actuated by stepper motors. This approach is intended to dramatically reduce the cost of benchmarking new HSAT designs for bifacial PV systems.
- 11 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Open AccessA Horizontal Single-Axis Tracker Mock-Up to Quickly Assess the Influence of Geometrical Factors on Bifacial Energy Gain
Bifacial photovoltaic modules on horizontal single-axis trackers have become the mainstream type of utility-scale solar power plant. Their optimal design involves many trade-offs between different geometric properties, which are difficult to capture via modeling tools or underestimated by research-scale test beds. This article presents the design and preliminary demonstration of a scaled test bed for monitoring irradiance non-uniformity on both sides of the panel and realistically assess the influence of geometrical parameters on the bifacial energy gain achieved. The mock-up developed includes an open-loop control system with back-tracking actuated by stepper motors. This approach is intended to dramatically reduce the cost of benchmarking new HSAT designs for bifacial PV systems.
- 11 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Indoor and Outdoor Evaluation of Curved Modules for VIPV
The vehicle integrated photovoltaic (VIPV) technology demands 3D curved PV surfaces to meet the specific design constraints in the automotive industry. The proper characterization of three dimensional PV surfaces requires specific methods and equipment that must be developed. This paper describes the procedures carried out for both outdoor and indoor characterization of modules with curvatures between 1 and 3 meter. IV curves at STC and the angular response of the modules are compared, showing remarkable resemblance. A unique collimated solar simulators has been adapted for indoor characterization while a two axis tracker with programmable deviation of the pointing to the sun has been used outdoors.
- 11 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Indoor and Outdoor Evaluation of Curved Modules for VIPV
The vehicle integrated photovoltaic (VIPV) technology demands 3D curved PV surfaces to meet the specific design constraints in the automotive industry. The proper characterization of three dimensional PV surfaces requires specific methods and equipment that must be developed. This paper describes the procedures carried out for both outdoor and indoor characterization of modules with curvatures between 1 and 3 meter. IV curves at STC and the angular response of the modules are compared, showing remarkable resemblance. A unique collimated solar simulators has been adapted for indoor characterization while a two axis tracker with programmable deviation of the pointing to the sun has been used outdoors.
- Open Access
- 10 June 2023
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 258
Collimated solar simulator for curved PV modules characterization
- 10 June 2023
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 258
Open AccessCollimated solar simulator for curved PV modules characterization
- 9 May 2022
- Published by Optica Publishing Group in Optics Express
- Vol. 30 (11) , 17886-17896
Characterization method and analysis of misalignments in micro-concentrator photovoltaic modules
Micro-scale concentrator photovoltaics (micro-CPV) is an emerging trend for the development of high-efficiency, low-cost photovoltaic systems. The miniaturization of optics and cells offers advantages in terms of performance and enables differentiation in the PV market. However, the sub-millimeter size of the solar cells used, the intrinsic narrow angular tolerance of CPV optical systems (typically around 0.5° and 2°), and the massive number of cells per module lead to very tight mechanical tolerances. Therefore, determining the misalignments between cells and optics is important for quality control inspection of modules. In this paper, we describe a method for characterizing these misalignments based on image acquisition and its subsequent processing and apply it to a micro-CPV module composed of 572 lens-cell units. This method is validated, using a unique experimental technique that takes advantage of the tracking system embedded in the module. The statistical distributions of misalignments are compared for two tracking positions, residuals are determined and shows the consistency of the method. Finally, the impact of misalignment distributions on the IV curve of the module is discussed.
- 9 May 2022
- Published by Optica Publishing Group in Optics Express
- Vol. 30 (11) , 17886-17896
Characterization method and analysis of misalignments in micro-concentrator photovoltaic modules
Micro-scale concentrator photovoltaics (micro-CPV) is an emerging trend for the development of high-efficiency, low-cost photovoltaic systems. The miniaturization of optics and cells offers advantages in terms of performance and enables differentiation in the PV market. However, the sub-millimeter size of the solar cells used, the intrinsic narrow angular tolerance of CPV optical systems (typically around 0.5° and 2°), and the massive number of cells per module lead to very tight mechanical tolerances. Therefore, determining the misalignments between cells and optics is important for quality control inspection of modules. In this paper, we describe a method for characterizing these misalignments based on image acquisition and its subsequent processing and apply it to a micro-CPV module composed of 572 lens-cell units. This method is validated, using a unique experimental technique that takes advantage of the tracking system embedded in the module. The statistical distributions of misalignments are compared for two tracking positions, residuals are determined and shows the consistency of the method. Finally, the impact of misalignment distributions on the IV curve of the module is discussed.
- Open Access
- 16 March 2022
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 240
Array of micro multijunction solar cells interconnected by conductive inks
- 16 March 2022
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 240
Open AccessArray of micro multijunction solar cells interconnected by conductive inks