Bruna Rafaella Loiola
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bruna Rafaella Loiola has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
Carlos A. C. Altemani
Mechanical Engineering Department of Energy, State University of Campinas, Campinas, SP, Brazil
2 shared publications- Francesco Scofano Neto
IME - Instituto Militar de Engenharia
2 shared publications - Rodrigo Otávio de Castro Guedes
Instituto Militar de Engenharia
2 shared publications - Çiğdem Susantez
Engineering Faculty, Department of Mechanical Engineering, Trakya University
2 shared publications Aldelio B. Caldeira
Management and Technological Innovation Agency, Brazilian Army, Rio de Janeiro, Brazil
1 shared publication- Aldélio Bueno Caldeira
Instituto Militar de Engenharia
1 shared publication
Latest Publications
- Open Access
- 13 November 2025
- Published by Instituto Federal de Educação, Ciência e Tecnologia do Ceará in Conexões - Ciência e Tecnologia
- Vol. 19, e025035
Análise computacional via CFD da resistência aerodinâmica de um veiculo militar
Este trabalho tem como finalidade estudar o comportamento aerodinâmico de um veículo terrestre militar. Para que o estudo fosse realizado, foi selecionada a viatura Guarani, atualmente empregada pelo Exército Brasileiro. Com o uso das ferramentas computacionais oferecidas pelo software ANSYS/Fluent, simulou-se o escoamento de ar em torno de um modelo geométrico baseado na viatura, permitindo obter resultados relacionados ao arrasto aerodinâmico do veículo para algumas velocidades. Como forma de complementar a análise, realizou-se a impressão 3D da geometria modelada para submetê-la ao estudo no túnel de vento, possibilitando comparar com os resultados encontrados na simulação. A partir de simulações computacionais e experimentos, estudou-se de forma satisfatória a resistência aerodinâmica sobre a viatura, encontrando-se valores para o coeficiente de arrasto na faixa de 0,60 a 0,69. Com isso, um dos objetivos da pesquisa foi contribuir para a análise da viabilidade do estudodo arrasto aerodinâmico sobre um veículo militar por meio de métodos computacionais, experimentos em túnel de vento de baixa escala e técnicas de manufatura aditiva, gerando menos custos de desenvolvimento para um projeto.
- 13 November 2025
- Published by Instituto Federal de Educação, Ciência e Tecnologia do Ceará in Conexões - Ciência e Tecnologia
- Vol. 19, e025035
Open AccessAnálise computacional via CFD da resistência aerodinâmica de um veiculo militar
Este trabalho tem como finalidade estudar o comportamento aerodinâmico de um veículo terrestre militar. Para que o estudo fosse realizado, foi selecionada a viatura Guarani, atualmente empregada pelo Exército Brasileiro. Com o uso das ferramentas computacionais oferecidas pelo software ANSYS/Fluent, simulou-se o escoamento de ar em torno de um modelo geométrico baseado na viatura, permitindo obter resultados relacionados ao arrasto aerodinâmico do veículo para algumas velocidades. Como forma de complementar a análise, realizou-se a impressão 3D da geometria modelada para submetê-la ao estudo no túnel de vento, possibilitando comparar com os resultados encontrados na simulação. A partir de simulações computacionais e experimentos, estudou-se de forma satisfatória a resistência aerodinâmica sobre a viatura, encontrando-se valores para o coeficiente de arrasto na faixa de 0,60 a 0,69. Com isso, um dos objetivos da pesquisa foi contribuir para a análise da viabilidade do estudodo arrasto aerodinâmico sobre um veículo militar por meio de métodos computacionais, experimentos em túnel de vento de baixa escala e técnicas de manufatura aditiva, gerando menos custos de desenvolvimento para um projeto.
- 21 June 2025
- Published by Taylor & Francis in Heat Transfer Engineering
- Vol. 47 (14) , 1267-1278
Bayes Inference Applied to the Estimation of Conjugate Coefficients in Heaters Cooling
- 21 June 2025
- Published by Taylor & Francis in Heat Transfer Engineering
- Vol. 47 (14) , 1267-1278
Bayes Inference Applied to the Estimation of Conjugate Coefficients in Heaters Cooling
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
A Preliminary Numerical Thermal Analysis of an Endometrial Ablation Procedure Based on Foley’s Catheter
Dysfunctional uterine bleeding (DUB) is an ailment affecting a substantial number of women during a significant part of their reproductive years. This condition usually leads to discomfort, mild or severe pain, or, in some extreme cases, anemia. It may be caused by diverse factors such as hormonal issues, structural abnormalities, or even cancer in a woman’s reproductive tract. A typical DUB treatment requires a pharmacological approach through the prescription of drugs. Nonetheless, some patients require a more involved treatment calling for surgical procedures. In order to avoid hysterectomy, which is the complete removal of the uterus, the medical community has devised, over the years, alternative surgical schemes to handle DUB issues. One such treatment is the “endometrial ablation technique” where the inner lining of the uterus is subjected to a controlled destruction by using a hot, approximately constant-temperature fluid inside a balloon, which is placed in contact with the uterine wall of the patient. As a means to avoid the high costs associated with such devices, the medical community has proposed a similar treatment in which the fluid inside the balloon is no longer held at a high constant temperature but rather diminishes as the treatment progresses. The main purpose of this contribution is to critically assess the effectiveness of this second, low-cost endometrial ablation treatment. Consequently, a mathematical model is devised in which Pennes’ bioheat equation is employed to predict the transient temperature field of the uterine wall together with an energy balance that yields the temperature of the saline solution inside the thermal balloon, throughout the duration of the treatment. These equations aresolved by utilizing the finite volume method and the numerical predictions are verified by comparing the present results with similar cases from the literature. Once the verification phase is authenticated, the uterine wall and fluid balloon transient temperature fields are obtained for typical situations reported in the medical literature. On general grounds, the simulations indicate that the extent of the affected tissue is strongly dependent on the volume,on the type of fluid inside the thermal balloon, and on the magnitude of the perfusion of the uterus. Moreover, it was found that the proposed low-cost treatment can indeed be a successful alternative to the standard endometrial ablation process under some viable circumstances that are described in the contribution.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessA Preliminary Numerical Thermal Analysis of an Endometrial Ablation Procedure Based on Foley’s Catheter
Dysfunctional uterine bleeding (DUB) is an ailment affecting a substantial number of women during a significant part of their reproductive years. This condition usually leads to discomfort, mild or severe pain, or, in some extreme cases, anemia. It may be caused by diverse factors such as hormonal issues, structural abnormalities, or even cancer in a woman’s reproductive tract. A typical DUB treatment requires a pharmacological approach through the prescription of drugs. Nonetheless, some patients require a more involved treatment calling for surgical procedures. In order to avoid hysterectomy, which is the complete removal of the uterus, the medical community has devised, over the years, alternative surgical schemes to handle DUB issues. One such treatment is the “endometrial ablation technique” where the inner lining of the uterus is subjected to a controlled destruction by using a hot, approximately constant-temperature fluid inside a balloon, which is placed in contact with the uterine wall of the patient. As a means to avoid the high costs associated with such devices, the medical community has proposed a similar treatment in which the fluid inside the balloon is no longer held at a high constant temperature but rather diminishes as the treatment progresses. The main purpose of this contribution is to critically assess the effectiveness of this second, low-cost endometrial ablation treatment. Consequently, a mathematical model is devised in which Pennes’ bioheat equation is employed to predict the transient temperature field of the uterine wall together with an energy balance that yields the temperature of the saline solution inside the thermal balloon, throughout the duration of the treatment. These equations aresolved by utilizing the finite volume method and the numerical predictions are verified by comparing the present results with similar cases from the literature. Once the verification phase is authenticated, the uterine wall and fluid balloon transient temperature fields are obtained for typical situations reported in the medical literature. On general grounds, the simulations indicate that the extent of the affected tissue is strongly dependent on the volume,on the type of fluid inside the thermal balloon, and on the magnitude of the perfusion of the uterus. Moreover, it was found that the proposed low-cost treatment can indeed be a successful alternative to the standard endometrial ablation process under some viable circumstances that are described in the contribution.
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Passenger vehicle behavior modeled by Power Flow using different mathematical tire models
Ground Vehicles can be approached as a set of integrated subsystems, with cause-effect relationships. Through the Power Flow Modeling approach, each of these subsystems can be interpreted as a black box, and interrelated with the others in a modular way, as long as causalities are respected. This work aims to take advantage of the modularity of the automobile interpreted as a set of integrated subsystems and evaluate the influence of mathematical tire models on its acceleration and braking behavior. Each of the subsystems is mathematically modeled in individual blocks that are then integrated, without loss of causality, in MATLAB/Simulink® software. The purpose is to provide a fully modular vehicle model, taking advantage of this Power Flow feature, in an open-source code. Furthermore, Inverse Problems are applied to estimate parameter values of the Burckhardt and Dugoff mathematical models in order to obtain similar behaviors of the corresponding tire model by the Magic Formula.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessPassenger vehicle behavior modeled by Power Flow using different mathematical tire models
Ground Vehicles can be approached as a set of integrated subsystems, with cause-effect relationships. Through the Power Flow Modeling approach, each of these subsystems can be interpreted as a black box, and interrelated with the others in a modular way, as long as causalities are respected. This work aims to take advantage of the modularity of the automobile interpreted as a set of integrated subsystems and evaluate the influence of mathematical tire models on its acceleration and braking behavior. Each of the subsystems is mathematically modeled in individual blocks that are then integrated, without loss of causality, in MATLAB/Simulink® software. The purpose is to provide a fully modular vehicle model, taking advantage of this Power Flow feature, in an open-source code. Furthermore, Inverse Problems are applied to estimate parameter values of the Burckhardt and Dugoff mathematical models in order to obtain similar behaviors of the corresponding tire model by the Magic Formula.
- Open Access
- 1 September 2022
- Published by KEAI Publishing in Defence Technology
- Vol. 18 (9) , 1653-1661
Natural convection effects on TNT solidification inside a shaped charge mold
- 1 September 2022
- Published by KEAI Publishing in Defence Technology
- Vol. 18 (9) , 1653-1661
Open AccessNatural convection effects on TNT solidification inside a shaped charge mold
- 16 September 2021
- Published by Elsevier in Computer Methods and Programs in Biomedicine
- Vol. 211, 106413
Numerical evaluation of the duodenal mucosal resurfacing technique for the treatment of Type 2 diabetes
- 16 September 2021
- Published by Elsevier in Computer Methods and Programs in Biomedicine
- Vol. 211, 106413
Numerical evaluation of the duodenal mucosal resurfacing technique for the treatment of Type 2 diabetes
- 4 May 2021
- Published by Taylor & Francis in Inverse Problems in Science and Engineering
- Vol. 29 (12) , 2207-2238
Cornering stiffness estimation using Levenberg–Marquardt approach
Study of vehicle dynamics aggregates possibilities to enhance performance, safety and reliability, such as the integration of control systems, usually requiring knowledge on vehicle's states and parameters. However, some critical values are difficult to measure or are not disclosed. For this reason, dynamics and stability analysis of six-wheeled vehicles are compromised, and available information on this matter is limited. In this context, this paper proposes the estimation of the cornering stiffness of a 6x6 vehicle by an inverse problem approach applying the Levenberg–Marquardt (LM) method. The algorithm required data from field experiments and from simulations of a vehicle model during a double-lane change manoeuvre developed using . Experimental and theoretical values for the vehicle yaw rate were combined through LM method for cornering stiffness estimation. The excellent agreement between measured and simulated yaw rate indicates that the proposed model and the estimated parameters properly represent the vehicle dynamics response.- 4 May 2021
- Published by Taylor & Francis in Inverse Problems in Science and Engineering
- Vol. 29 (12) , 2207-2238
Cornering stiffness estimation using Levenberg–Marquardt approach
Study of vehicle dynamics aggregates possibilities to enhance performance, safety and reliability, such as the integration of control systems, usually requiring knowledge on vehicle's states and parameters. However, some critical values are difficult to measure or are not disclosed. For this reason, dynamics and stability analysis of six-wheeled vehicles are compromised, and available information on this matter is limited. In this context, this paper proposes the estimation of the cornering stiffness of a 6x6 vehicle by an inverse problem approach applying the Levenberg–Marquardt (LM) method. The algorithm required data from field experiments and from simulations of a vehicle model during a double-lane change manoeuvre developed using . Experimental and theoretical values for the vehicle yaw rate were combined through LM method for cornering stiffness estimation. The excellent agreement between measured and simulated yaw rate indicates that the proposed model and the estimated parameters properly represent the vehicle dynamics response.- 1 January 2021
- Published by Begell House Inc. Publishers
- p. 461-475
NUMERICAL ANALYSIS OF EXPLOSIVE SOLIDIFICATION UNDER THE EFFECT OF DIFFERENT BOUNDARY CONDITIONS
Casting of explosives in a shaped charge shell for the production of warheads and antitank ammunitions is an important process. This type of device has a conical void coated by a metal liner, which promotes a high velocity jet of the liquid metal after the detonation of the explosive. Distinct explosives are employed with this purpose and an investigation of the cooling conditions is suitable. Therefore, the objective of this work is to evaluate numerically the solidification process of TNT, Baratol and Composition B explosives inside a shaped charge by utilizing the apparent heat capacity method on a transient-diffusive heat transfer equation to model the phase change. The mathematical model is solved in COMSOL Multiphysics and Modeling Software by a finite-element approach. The solutions are verified against literature ones. Prescribed temperatures are considered for conical and bottom surfaces, while natural convection is applied for the outer surfaces. Three boundary conditions for top surface, namely convection, adiabatic and isothermal boundary conditions are analyzed in the simulations. Results show that, for the same analyzed geometry, Baratol has solidified in less time than TNT and Composition B. It has been concluded that the most sensitive parameters of this process are the thermophysical properties of the explosive. Finally, the isothermal top boundary condition showed to be preferable to promote solidification of high explosives in shaped charge shell.
- 1 January 2021
- Published by Begell House Inc. Publishers
- p. 461-475
NUMERICAL ANALYSIS OF EXPLOSIVE SOLIDIFICATION UNDER THE EFFECT OF DIFFERENT BOUNDARY CONDITIONS
Casting of explosives in a shaped charge shell for the production of warheads and antitank ammunitions is an important process. This type of device has a conical void coated by a metal liner, which promotes a high velocity jet of the liquid metal after the detonation of the explosive. Distinct explosives are employed with this purpose and an investigation of the cooling conditions is suitable. Therefore, the objective of this work is to evaluate numerically the solidification process of TNT, Baratol and Composition B explosives inside a shaped charge by utilizing the apparent heat capacity method on a transient-diffusive heat transfer equation to model the phase change. The mathematical model is solved in COMSOL Multiphysics and Modeling Software by a finite-element approach. The solutions are verified against literature ones. Prescribed temperatures are considered for conical and bottom surfaces, while natural convection is applied for the outer surfaces. Three boundary conditions for top surface, namely convection, adiabatic and isothermal boundary conditions are analyzed in the simulations. Results show that, for the same analyzed geometry, Baratol has solidified in less time than TNT and Composition B. It has been concluded that the most sensitive parameters of this process are the thermophysical properties of the explosive. Finally, the isothermal top boundary condition showed to be preferable to promote solidification of high explosives in shaped charge shell.
- 1 January 2020
- Published by Begell House Inc. Publishers in Critical Reviews in Biomedical Engineering
- Vol. 48 (2) , 111-124
Thermal Characterization of Ex Vivo Tissue
The objective of this work was to estimate the parameters of a bioheat transfer problem. A sample of bovine muscle was used for the experiments. The tissue was heated with an electrical radiator, while its surface temperature was measured with an infrared camera. The imposed heat flux was estimated with a sample of Plexiglas with known thermophysical properties. The Markov Chain Monte Carlo method and an Approximate Bayesian Computation algorithm were used for the solutions of the inverse problems examined in this work. The agreement between measured and estimated temperatures was within the experimental uncertainties, thus demonstrating that the model and the estimated parameters appropriately represent the physics of the experiment.
- 1 January 2020
- Published by Begell House Inc. Publishers in Critical Reviews in Biomedical Engineering
- Vol. 48 (2) , 111-124
Thermal Characterization of Ex Vivo Tissue
The objective of this work was to estimate the parameters of a bioheat transfer problem. A sample of bovine muscle was used for the experiments. The tissue was heated with an electrical radiator, while its surface temperature was measured with an infrared camera. The imposed heat flux was estimated with a sample of Plexiglas with known thermophysical properties. The Markov Chain Monte Carlo method and an Approximate Bayesian Computation algorithm were used for the solutions of the inverse problems examined in this work. The agreement between measured and estimated temperatures was within the experimental uncertainties, thus demonstrating that the model and the estimated parameters appropriately represent the physics of the experiment.