Barbara Gabriel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Barbara Gabriel has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Robertt Angelo Fontes Valente
University of Aveiro
7 shared publications - Victor Neto
TEMA—Centre for Mechanical Technology and Automation, Department of Mechanical Engineering, University of Aveiro, 3810-193 Aveiro, Portugal
7 shared publications - Antonio Andrade-Campos
Centre for Mechanical Technology and Automation (TEMA), Department of Mechanical Engineering, University of Aveiro, 3810-193 Aveiro, Portugal
4 shared publications - Joao Dias-De-Oliveira
Departamento de Engenharia Mecânica, Universidade de Aveiro, Aveiro, Portugal
3 shared publications - Carla Ferreira
University of Aveiro
2 shared publications - Aida Guerra
Aalborg University
1 shared publication
Latest Publications
- Open Access
- 14 November 2025
- Published by Aalborg University in Proceedings from the International Research Symposium on Problem-Based Learning (IRSPBL)
Empathy and Education for Sustainable Development
The engineering skills required for the 21st century and the green transition go beyond technical knowledge. Sustainability problems are multidimensional and require consideration of multiple perspectives. Empathy plays a fundamental role in enabling the development of more humanistic and socially constructed skills required to act for sustainability. It is an essential element of human-centred design and ethical behaviour, as well as engineering teamwork, engagement with diverse stakeholders, and ability to work in intercultural settings. Engineers must relate to the needs of the primary user and empathise with those (in)directly affected by their decisions. This highlights the importance of helping engineering students cultivate and apply empathy. However, little research has explored the influence of students’ empathy on education outcomes for sustainable development. The paper presents an overview of key publications in education for sustainable development (ESD) - the first step of a state-of-the-art review which is part of a larger study on empathic engineering education for sustainable development. The overview is guided by the research question “How is empathy described and framed in current sustainable education policies and frameworks?”. The paper provides a time-framed overview of the current policies and educational frameworks and identifies directions for future work on embedding empathy in engineering education for sustainable development.
- 14 November 2025
- Published by Aalborg University in Proceedings from the International Research Symposium on Problem-Based Learning (IRSPBL)
Open AccessEmpathy and Education for Sustainable Development
The engineering skills required for the 21st century and the green transition go beyond technical knowledge. Sustainability problems are multidimensional and require consideration of multiple perspectives. Empathy plays a fundamental role in enabling the development of more humanistic and socially constructed skills required to act for sustainability. It is an essential element of human-centred design and ethical behaviour, as well as engineering teamwork, engagement with diverse stakeholders, and ability to work in intercultural settings. Engineers must relate to the needs of the primary user and empathise with those (in)directly affected by their decisions. This highlights the importance of helping engineering students cultivate and apply empathy. However, little research has explored the influence of students’ empathy on education outcomes for sustainable development. The paper presents an overview of key publications in education for sustainable development (ESD) - the first step of a state-of-the-art review which is part of a larger study on empathic engineering education for sustainable development. The overview is guided by the research question “How is empathy described and framed in current sustainable education policies and frameworks?”. The paper provides a time-framed overview of the current policies and educational frameworks and identifies directions for future work on embedding empathy in engineering education for sustainable development.
- Open Access
- 26 February 2025
- Published by Walter de Gruyter GmbH in Triple Helix
- Vol. 11 (3) , 412-442
Creating Novel, Responsible, and Impactful Entrepreneurship Education Models
In this article, we ask: How can universities create novel responsible, and impactful entrepreneurship education models? Answering this question could enhance the take-up and relevance of entrepreneurship education, encouraging students, academics, entrepreneurs and, indeed, every citizen, to use their skills to address society’s grand challenges. We adopt an in-depth case approach to critically explore the EU-funded ‘Start for Future’ (SFF) alliance, an entrepreneurship and innovation mega-ecosystem that brings universities together to deliver entrepreneurship education in SDG-related domains. Our article contributes by: 1) enhancing understanding of the critical role universities play as entrepreneurial changemakers, driving social, economic and technological transformation; 2) augmenting the growing body of scholarship on entrepreneurship education, specifically illuminating the responsibility dimension in driving impactful entrepreneurship; 3) drawing attention to a novel, playful yet highly impactful entrepreneurship education model – Start for Future – one built on the principles of responsible entrepreneurship, reciprocity, mutual learning, co-creation and experimentation.
- 26 February 2025
- Published by Walter de Gruyter GmbH in Triple Helix
- Vol. 11 (3) , 412-442
Open AccessCreating Novel, Responsible, and Impactful Entrepreneurship Education Models
In this article, we ask: How can universities create novel responsible, and impactful entrepreneurship education models? Answering this question could enhance the take-up and relevance of entrepreneurship education, encouraging students, academics, entrepreneurs and, indeed, every citizen, to use their skills to address society’s grand challenges. We adopt an in-depth case approach to critically explore the EU-funded ‘Start for Future’ (SFF) alliance, an entrepreneurship and innovation mega-ecosystem that brings universities together to deliver entrepreneurship education in SDG-related domains. Our article contributes by: 1) enhancing understanding of the critical role universities play as entrepreneurial changemakers, driving social, economic and technological transformation; 2) augmenting the growing body of scholarship on entrepreneurship education, specifically illuminating the responsibility dimension in driving impactful entrepreneurship; 3) drawing attention to a novel, playful yet highly impactful entrepreneurship education model – Start for Future – one built on the principles of responsible entrepreneurship, reciprocity, mutual learning, co-creation and experimentation.
- 1 March 2024
- Published by IATED Academy in INTED Proceedings
- p. 3296
PROMOTING THE ENTREPRENEURIAL MINDSET IN ENGINEERING COURSES AT THE UNIVERSITY OF AVEIRO, PORTUGAL
- 1 March 2024
- Published by IATED Academy in INTED Proceedings
- p. 3296
PROMOTING THE ENTREPRENEURIAL MINDSET IN ENGINEERING COURSES AT THE UNIVERSITY OF AVEIRO, PORTUGAL
- Open Access
- 22 February 2024
- Published by MDPI AG in Trends in Higher Education
- Vol. 3 (1) , 142-154
In Search of a More Balanced Engineering Curriculum: The Perspective of Students, Teachers, Alumni and Employers
The purpose of this paper is to raise important issues in engineering education in the face of contemporary challenges and demands through the voices of different stakeholders in engineering curricula and in the practice of professional engineering. Several challenges and future perspectives are based on important skills, like soft skills, which are required by employers and include communication, decision-making, problem-solving, leadership and emotional intelligence, as well as the ability to work with people of different backgrounds and apply technical knowledge. A qualitative data analysis of interviews with students, alumni, teachers and employers revealed the demand for more balanced qualified curricula for higher education institutions in the field of engineering. This includes the promotion of collaborative learning spaces, authentic learning experiences based on engaging students in real situations, project-based learning, industrial visits, guest lectures and problem-solving methodologies that are perceived by these stakeholders as essential in the construction of a curriculum, in line with the specific technical competences of each area.
- 22 February 2024
- Published by MDPI AG in Trends in Higher Education
- Vol. 3 (1) , 142-154
Open AccessIn Search of a More Balanced Engineering Curriculum: The Perspective of Students, Teachers, Alumni and Employers
The purpose of this paper is to raise important issues in engineering education in the face of contemporary challenges and demands through the voices of different stakeholders in engineering curricula and in the practice of professional engineering. Several challenges and future perspectives are based on important skills, like soft skills, which are required by employers and include communication, decision-making, problem-solving, leadership and emotional intelligence, as well as the ability to work with people of different backgrounds and apply technical knowledge. A qualitative data analysis of interviews with students, alumni, teachers and employers revealed the demand for more balanced qualified curricula for higher education institutions in the field of engineering. This includes the promotion of collaborative learning spaces, authentic learning experiences based on engaging students in real situations, project-based learning, industrial visits, guest lectures and problem-solving methodologies that are perceived by these stakeholders as essential in the construction of a curriculum, in line with the specific technical competences of each area.
- 1 August 2018
- Published by Elsevier in Science of The Total Environment
- Vol. 631-632, 1440-1456
An overview of graphene materials: Properties, applications and toxicity on aquatic environments
- 1 August 2018
- Published by Elsevier in Science of The Total Environment
- Vol. 631-632, 1440-1456
An overview of graphene materials: Properties, applications and toxicity on aquatic environments
- 1 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Towards Excellence in Engineering Education The profile of Higher Education Teachers on Engineering Programs
True excellence in higher education, namely in engineering, is a difficult concept to define and attain. Engineering programs tend to value the later years as the most important in terms of training and scientific depth, while the first years are relatively neglected. At the same time, there is still a tendency to look at teachers' achievements in terms of research and knowledge, detached in a certain way from pedagogy. On the contrary, more focus should be put into analysing the profile of teachers and its adequacy to the different approaches needed across the years and course units of a master program. Added to this, are the distinct “perceived realities” between (i) what teachers see as a satisfactorily provided service, (ii) what students need and feel to be the quality of the learning experience, and (iii) what society expects (and will expect, in the future) from engineers. Different views and different alignments, from different stakeholders, require careful assessment and analysis, since the quality of the teaching and learning (as assumed in this study) is strongly related to an individual (or group) perception. In this paper, a methodology is introduced that involves the main stakeholders in defining the quality of teaching and learning, focused on the first year of engineering courses at the University of Aveiro (Portugal). For this, a set of meetings and discussion forums provided the required context for identifying attributes of the mentioned “perceived quality”. As an outcome, a new model is presented, inspired in methodologies usually applied within the field of product design and development. The first layer of results is presented, together with a preliminary analysis and discussion. Future steps towards the goal of defining the best profile of higher education teachers for achieving (a higher level of) excellence in engineering education are also indicated.
- 1 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Towards Excellence in Engineering Education The profile of Higher Education Teachers on Engineering Programs
True excellence in higher education, namely in engineering, is a difficult concept to define and attain. Engineering programs tend to value the later years as the most important in terms of training and scientific depth, while the first years are relatively neglected. At the same time, there is still a tendency to look at teachers' achievements in terms of research and knowledge, detached in a certain way from pedagogy. On the contrary, more focus should be put into analysing the profile of teachers and its adequacy to the different approaches needed across the years and course units of a master program. Added to this, are the distinct “perceived realities” between (i) what teachers see as a satisfactorily provided service, (ii) what students need and feel to be the quality of the learning experience, and (iii) what society expects (and will expect, in the future) from engineers. Different views and different alignments, from different stakeholders, require careful assessment and analysis, since the quality of the teaching and learning (as assumed in this study) is strongly related to an individual (or group) perception. In this paper, a methodology is introduced that involves the main stakeholders in defining the quality of teaching and learning, focused on the first year of engineering courses at the University of Aveiro (Portugal). For this, a set of meetings and discussion forums provided the required context for identifying attributes of the mentioned “perceived quality”. As an outcome, a new model is presented, inspired in methodologies usually applied within the field of product design and development. The first layer of results is presented, together with a preliminary analysis and discussion. Future steps towards the goal of defining the best profile of higher education teachers for achieving (a higher level of) excellence in engineering education are also indicated.
- 30 May 2018
- Published by Taylor & Francis in European Journal of Engineering Education
- Vol. 43 (6) , 950-966
A model for the effective engagement of all stakeholders in engineering education and its pilot implementation
Methodologies for engineering learning and teaching (MELT) approach aims to enhance the attractiveness of education through science, technology, engineering and mathematics (STEM) among young people, while promoting awareness of future careers in these areas. To this end, students’ expectations are considered within university programmes, aiming to an increased engagement in STEM careers. To accomplish these goals, a new and integrated approach (MELT) is presented, involving the main stakeholders in both scientific education and society. An education framework is presented, providing guidelines for an improved collaborative approach to STEM education in the future. Results from the pilot implementation of MELT are presented, from a small-scale education parliament prototype. From these initial stage and results, it is seen that there is a need for a proper alignment of expectations from all involved stakeholders, concerning the engineering education towards society’s demands.
- 30 May 2018
- Published by Taylor & Francis in European Journal of Engineering Education
- Vol. 43 (6) , 950-966
A model for the effective engagement of all stakeholders in engineering education and its pilot implementation
Methodologies for engineering learning and teaching (MELT) approach aims to enhance the attractiveness of education through science, technology, engineering and mathematics (STEM) among young people, while promoting awareness of future careers in these areas. To this end, students’ expectations are considered within university programmes, aiming to an increased engagement in STEM careers. To accomplish these goals, a new and integrated approach (MELT) is presented, involving the main stakeholders in both scientific education and society. An education framework is presented, providing guidelines for an improved collaborative approach to STEM education in the future. Results from the pilot implementation of MELT are presented, from a small-scale education parliament prototype. From these initial stage and results, it is seen that there is a need for a proper alignment of expectations from all involved stakeholders, concerning the engineering education towards society’s demands.
- Open Access
- 19 July 2017
- Published by Wiley in Journal of Nanomaterials
- Vol. 2017, 1-8
Plasma Treated Active Carbon for Capacitive Deionization of Saline Water
The plasma treatment on commercial active carbon (AC) was carried out in a capacitively coupled plasma system using Ar + 10% O2 at pressure of 4.0 Torr. The RF plasma power ranged from 50 W to 100 W and the processing time was 10 min. The carbon film electrode was fabricated by electrophoretic deposition. Micro-Raman spectroscopy revealed the highly increased disorder of sp2 C lattice for the AC treated at 75 W. An electrosorption capacity of 6.15 mg/g was recorded for the carbon treated at 75 W in a 0.1 mM NaCl solution when 1.5 V was applied for 5 hours, while the capacity of the untreated AC was 1.01 mg/g. The plasma treatment led to 5.09 times increase in the absorption capacity. The jump of electrosorption capacity by plasma treatment was consistent with the Raman spectra and electrochemical double layer capacitance. This work demonstrated that plasma treatment was a potentially efficient approach to activating biochar to serve as electrode material for capacitive deionization (CDI).
- 19 July 2017
- Published by Wiley in Journal of Nanomaterials
- Vol. 2017, 1-8
Open AccessPlasma Treated Active Carbon for Capacitive Deionization of Saline Water
The plasma treatment on commercial active carbon (AC) was carried out in a capacitively coupled plasma system using Ar + 10% O2 at pressure of 4.0 Torr. The RF plasma power ranged from 50 W to 100 W and the processing time was 10 min. The carbon film electrode was fabricated by electrophoretic deposition. Micro-Raman spectroscopy revealed the highly increased disorder of sp2 C lattice for the AC treated at 75 W. An electrosorption capacity of 6.15 mg/g was recorded for the carbon treated at 75 W in a 0.1 mM NaCl solution when 1.5 V was applied for 5 hours, while the capacity of the untreated AC was 1.01 mg/g. The plasma treatment led to 5.09 times increase in the absorption capacity. The jump of electrosorption capacity by plasma treatment was consistent with the Raman spectra and electrochemical double layer capacitance. This work demonstrated that plasma treatment was a potentially efficient approach to activating biochar to serve as electrode material for capacitive deionization (CDI).
- 12 December 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Open think-tank on engineering education: A forum of “face-to-face” debate between stakeholders
This paper describes a model (and the respective guidelines) for the creation of a debate “think-tank” around the thematic of Engineering Education. From this initiative, a first outcome is obtained, in the form of the Engineering Education Forum 2016 (EEF 2016). The Engineering Education Forum is therefore intended to be a place of discussion and debate on this thematic. The model behind Forum encompasses different approaches and tendencies, looking at the past, analysing the present and discussing the future. From the EEF 2016, several outputs and outcomes can be obtained and used for future strategies on Engineering Education. They are presented in this work, the first one focusing on preliminary quantitative results, regarding both the profiles of involved stakeholders and the responses of participants to a number of challenges proposed to the participants of the “face-to-face” debate. The second group of outcomes is related to qualitative aspects, such as the sessions' content and debates, as well as hints for future initiatives following the EEF model.
- 12 December 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Open think-tank on engineering education: A forum of “face-to-face” debate between stakeholders
This paper describes a model (and the respective guidelines) for the creation of a debate “think-tank” around the thematic of Engineering Education. From this initiative, a first outcome is obtained, in the form of the Engineering Education Forum 2016 (EEF 2016). The Engineering Education Forum is therefore intended to be a place of discussion and debate on this thematic. The model behind Forum encompasses different approaches and tendencies, looking at the past, analysing the present and discussing the future. From the EEF 2016, several outputs and outcomes can be obtained and used for future strategies on Engineering Education. They are presented in this work, the first one focusing on preliminary quantitative results, regarding both the profiles of involved stakeholders and the responses of participants to a number of challenges proposed to the participants of the “face-to-face” debate. The second group of outcomes is related to qualitative aspects, such as the sessions' content and debates, as well as hints for future initiatives following the EEF model.
- 12 December 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Methodologies for Engineering Learning and Teaching (MELT) approach: A way to bring young people to science (and science to young people)
The goal of the Methodologies for Engineering Learning and Teaching (MELT) approach is to enhance the attractiveness of education through science, technology, engineering and mathematics subjects, while promoting awareness of STEM careers during upper secondary school. As a consequence, its main goal is to take into account students' aspirations and expectations during university programs and beyond, leading to an increased engagement in STEM careers. To accomplish these goals, a new, innovative and connected approach is presented, with a concept that encompasses the main stakeholders in scientific education, along with the main actors in society. A global and scalable education framework model is presented, aiming to provide guidelines for an improved collaborative approach to STEM education in the future.
- 12 December 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Methodologies for Engineering Learning and Teaching (MELT) approach: A way to bring young people to science (and science to young people)
The goal of the Methodologies for Engineering Learning and Teaching (MELT) approach is to enhance the attractiveness of education through science, technology, engineering and mathematics subjects, while promoting awareness of STEM careers during upper secondary school. As a consequence, its main goal is to take into account students' aspirations and expectations during university programs and beyond, leading to an increased engagement in STEM careers. To accomplish these goals, a new, innovative and connected approach is presented, with a concept that encompasses the main stakeholders in scientific education, along with the main actors in society. A global and scalable education framework model is presented, aiming to provide guidelines for an improved collaborative approach to STEM education in the future.