Izabela Dagmara Czabak-Górska
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Izabela Dagmara Czabak-Górska has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Aneta Kucińska-Landwójtowicz
Department of Management and Production Engineering, Opole University of Technology, Opole, Poland
3 shared publications Aneta Kucińska-Landwójtowicz
2 shared publications- Marcin Lorenc
Faculty of Production and Logistics Engineering, Department of Production and Services Quality Engineering
2 shared publications - Paulo Sampaio
Department of Production and Systems, University of Minho, Braga, Portugal
2 shared publications - Pedro Domingues
University of Minho ALGORITMI Research Centre, Intelligent Systems Associate Laboratory (LASI) Guimaraes
2 shared publications Carolina Ferradaz de Carvalho
Department of Production and Systems, ALGORITMI Research Centre, University of Minho, Braga, Portugal
1 shared publication
Latest Publications
- Top Cited Papers
- 18 May 2023
- Published by Emerald Publishing in International Journal of Quality & Reliability Management
- Vol. 41 (1) , 60-83
Organizational maturity models: the leading research fields and opportunities for further studies
Purpose: The aim of the article is to determine research areas and to recognize the current direction in the development of maturity models, to indicate the key areas of organizational maturity models (OMMs) development and their classification as well as to pinpoint research gaps and areas of potential development of OMMs in the context of scientific research and the needs of management practitioners.Design/methodology/approach: The research was conducted using the literature review method, bibliometric analysis and visual mappings.Findings: The empirical classification developed in this paper identified 12 categories based on management areas, constituting the criteria for classifying OMMs models, where OMMs are being developed: Information Technology, Project Management, Business Management and Strategy, Human Resource, Ergonomics, Health and Safety Management, Industry 4.0 concept, Knowledge Management, Process Management, Performance Management, Quality Management, Supply Chain Management, Risk Management and Innovation Management.Research limitations/implications: The main limitation is the analysis in the scope of topic OMMs including solely the Scopus and Thompson Reuters Web of Science database. Another shortcoming is conducting data analysis and classification based on the abstracts of the selected articles.Originality/value: This work is a starting point to prospect trends for future revolving around the OMMs crossing different databases.
- 18 May 2023
- Published by Emerald Publishing in International Journal of Quality & Reliability Management
- Vol. 41 (1) , 60-83
Top Cited PapersOrganizational maturity models: the leading research fields and opportunities for further studies
Purpose: The aim of the article is to determine research areas and to recognize the current direction in the development of maturity models, to indicate the key areas of organizational maturity models (OMMs) development and their classification as well as to pinpoint research gaps and areas of potential development of OMMs in the context of scientific research and the needs of management practitioners.Design/methodology/approach: The research was conducted using the literature review method, bibliometric analysis and visual mappings.Findings: The empirical classification developed in this paper identified 12 categories based on management areas, constituting the criteria for classifying OMMs models, where OMMs are being developed: Information Technology, Project Management, Business Management and Strategy, Human Resource, Ergonomics, Health and Safety Management, Industry 4.0 concept, Knowledge Management, Process Management, Performance Management, Quality Management, Supply Chain Management, Risk Management and Innovation Management.Research limitations/implications: The main limitation is the analysis in the scope of topic OMMs including solely the Scopus and Thompson Reuters Web of Science database. Another shortcoming is conducting data analysis and classification based on the abstracts of the selected articles.Originality/value: This work is a starting point to prospect trends for future revolving around the OMMs crossing different databases.
- 11 April 2023
- Published by Emerald Publishing in International Journal of Quality & Reliability Management
- Vol. 40 (10) , 2632-2663
Performance measurement model for technical universities – case study
Purpose: The main purpose of this paper is twofold: to present a proposal for a model of educational quality management system within a process approach context for technical universities, and a conceptual model of a performance measurement system (PMS) towards the assessment of the quality level of management, core and support processes.Design/methodology/approach: The paper encompasses two main parts: a theoretical portion and a case study. Within the theoretical background, the authors discuss the issue of educational quality management supported on a process approach perspective as well as performance measurement system in high education (HE). The case study reports the development of the concept of performance measurement system for technical universities.Findings: The proposed system of educational quality management supported on a process approach, together with a conceptual model of the performance measurement system, can be implemented in every technical university. The identification of processes in the education quality management system permitted the development of the PMS. The model covers 32 key performance indicators (KPIs) for management processes, 39 for core processes and 19 for supporting ones.Research limitations/implications: The proposed performance measurement system is limited in its focus on educational processes and support of these processes. The evaluation of scientific and research activity and aspects related to financial resources is not pursued.Originality/value: Elaboration of a conceptual model of a performance measurement system towards the assessment of the quality level of management, core and support processes is dedicated to technical universities.
- 11 April 2023
- Published by Emerald Publishing in International Journal of Quality & Reliability Management
- Vol. 40 (10) , 2632-2663
Performance measurement model for technical universities – case study
Purpose: The main purpose of this paper is twofold: to present a proposal for a model of educational quality management system within a process approach context for technical universities, and a conceptual model of a performance measurement system (PMS) towards the assessment of the quality level of management, core and support processes.Design/methodology/approach: The paper encompasses two main parts: a theoretical portion and a case study. Within the theoretical background, the authors discuss the issue of educational quality management supported on a process approach perspective as well as performance measurement system in high education (HE). The case study reports the development of the concept of performance measurement system for technical universities.Findings: The proposed system of educational quality management supported on a process approach, together with a conceptual model of the performance measurement system, can be implemented in every technical university. The identification of processes in the education quality management system permitted the development of the PMS. The model covers 32 key performance indicators (KPIs) for management processes, 39 for core processes and 19 for supporting ones.Research limitations/implications: The proposed performance measurement system is limited in its focus on educational processes and support of these processes. The evaluation of scientific and research activity and aspects related to financial resources is not pursued.Originality/value: Elaboration of a conceptual model of a performance measurement system towards the assessment of the quality level of management, core and support processes is dedicated to technical universities.
- Top Cited PapersOpen Access
- 1 May 2021
- Published by Elsevier in Expert Systems with Applications
- Vol. 169
Ordered fuzzy WASPAS method for selection of improvement projects
- 1 May 2021
- Published by Elsevier in Expert Systems with Applications
- Vol. 169
Top Cited PapersOpen AccessOrdered fuzzy WASPAS method for selection of improvement projects
- Open Access
- 12 June 2020
- Published by IBIMA Publishing in Journal of Organizational Management Studies
- Vol. 2020, 1-13
Improvement Projects – Characteristics and Classification
- 12 June 2020
- Published by IBIMA Publishing in Journal of Organizational Management Studies
- Vol. 2020, 1-13
Open AccessImprovement Projects – Characteristics and Classification
- Open Access
- 25 September 2018
- Published by CBU Research Institute in CBU International Conference Proceedings
- Vol. 6, 1042-1049
MULTIVARIATE CONTROL CHARTS BASED ON DATA DEPTH FOR SUBGROUP LOCATION AND SCALE - CASE STUDY
The purpose of the article is to present a method for determining control charts, which allow to control few interrelated quality characteristics. Often, in production practice, there is a need to simultaneously control several interrelated quality characteristics. The use of univariate control charts, separately for each quality characteristics, may lead to inadequate corrective actions of a production process. In such situations, it is recommended to use multivariate control charts, for example, the T2 control chart. However, the use of this classic approach involves making complicated calculations. Therefore, the author of this paper suggests using multivariate control charts based on data depth proposed by Liu. In this paper, the author presented the idea and principles of the multivariate control chart based on data depth and then, using it to assess the statistical stability of the process in a manufacturing company, engaged in the production of window fittings.
- 25 September 2018
- Published by CBU Research Institute in CBU International Conference Proceedings
- Vol. 6, 1042-1049
Open AccessMULTIVARIATE CONTROL CHARTS BASED ON DATA DEPTH FOR SUBGROUP LOCATION AND SCALE - CASE STUDY
The purpose of the article is to present a method for determining control charts, which allow to control few interrelated quality characteristics. Often, in production practice, there is a need to simultaneously control several interrelated quality characteristics. The use of univariate control charts, separately for each quality characteristics, may lead to inadequate corrective actions of a production process. In such situations, it is recommended to use multivariate control charts, for example, the T2 control chart. However, the use of this classic approach involves making complicated calculations. Therefore, the author of this paper suggests using multivariate control charts based on data depth proposed by Liu. In this paper, the author presented the idea and principles of the multivariate control chart based on data depth and then, using it to assess the statistical stability of the process in a manufacturing company, engaged in the production of window fittings.
- Open Access
- 25 September 2018
- Published by CBU Research Institute in CBU International Conference Proceedings
- Vol. 6, 1050-1055
STATISTICAL PERFORMANCE OF X ̅ AND R CONTROL CHARTS FOR SKEWED DISTRIBUTION - CASE STUDY
The purpose of the article is to determine the Type I error and Average Run Length values for charts and R, for which control limits have been determined based on the Skewness Correction method (SC method), with an unknown probability distribution of the qualitative feature being tested. The study also used the Monte Carlo Simulation, in which two sampling methods were used to obtain random input scenarios - matching theoretical distributions (selected skewed distributions) and bootstrap resampling based on a manufacturing company’s measurement data. The presented article is a continuation of Czabak-Górska's (2016) research. The purpose of the article was to determine Type I error value and ARL type A for chart and R, for which the control limits were determined based on the skewness correction method. For this purpose, measurement data from a company producing car seat frames. Presented case study showed that the chart determined using the skewness correction method works better for the data described by the gamma or log-normal distribution. This, in turn, may suggest that appropriate distribution was selected for the presented data, thanks to which it is possible to determine the course and nature of the process, which is important from the point of view of its further analysis, e.g. in terms of the process capability.
- 25 September 2018
- Published by CBU Research Institute in CBU International Conference Proceedings
- Vol. 6, 1050-1055
Open AccessSTATISTICAL PERFORMANCE OF X ̅ AND R CONTROL CHARTS FOR SKEWED DISTRIBUTION - CASE STUDY
The purpose of the article is to determine the Type I error and Average Run Length values for charts and R, for which control limits have been determined based on the Skewness Correction method (SC method), with an unknown probability distribution of the qualitative feature being tested. The study also used the Monte Carlo Simulation, in which two sampling methods were used to obtain random input scenarios - matching theoretical distributions (selected skewed distributions) and bootstrap resampling based on a manufacturing company’s measurement data. The presented article is a continuation of Czabak-Górska's (2016) research. The purpose of the article was to determine Type I error value and ARL type A for chart and R, for which the control limits were determined based on the skewness correction method. For this purpose, measurement data from a company producing car seat frames. Presented case study showed that the chart determined using the skewness correction method works better for the data described by the gamma or log-normal distribution. This, in turn, may suggest that appropriate distribution was selected for the presented data, thanks to which it is possible to determine the course and nature of the process, which is important from the point of view of its further analysis, e.g. in terms of the process capability.
- Open Access
- 22 September 2017
- Published by CBU Research Institute in CBU International Conference Proceedings
- Vol. 5, 86-93
THE CLASSIFICATION AND CHARACTERISTICS OF CONTROL CHARTS
Control Charts are the basic tool for quality control. They were developed in the 1920s when the dominant type of production was mass production. In order to properly use classic Control Charts, the data from the manufacturing process should meet the following assumptions: an empirical distribution of measurement data should be normally distributed or close to a normal distribution, measurement data should be independent, the manufacturing process should be capable of quality depending on the type of Control Chart, a sample that is large enough (sometimes made of several elements) must be taken. Currently, a shift can be observed from mass production towards short production runs, which causes the proper use of the traditional approach to be impossible. In recent years, control charts are once again in the spotlight, and consequently many scientists, i.e. Reynolds, Zimmer, Costa, Calvin and Chan have undertaken the task to adapt the classic idea of keeping Control Charts to modern conditions of production. The development of science in this area allows for the avoidance of making major mistakes in the conduct of Control Charts and for making the wrong decisions based on erroneous analysis. However, the appearance of new literature pieces implies the need to classify Control Charts, therefore, this article describes the idea of conduct, the most important assumptions and distribution of classical Shewhart's Control Charts, as well as a suggestion for the distribution of advanced Control Charts that meet the needs of the currently used production types. The work also contains a concise description of the chosen control charts as well as the threats resulting from their inappropriate selection. This elaboration is an extension to the article of Czabak-Górska (2017).
- 22 September 2017
- Published by CBU Research Institute in CBU International Conference Proceedings
- Vol. 5, 86-93
Open AccessTHE CLASSIFICATION AND CHARACTERISTICS OF CONTROL CHARTS
Control Charts are the basic tool for quality control. They were developed in the 1920s when the dominant type of production was mass production. In order to properly use classic Control Charts, the data from the manufacturing process should meet the following assumptions: an empirical distribution of measurement data should be normally distributed or close to a normal distribution, measurement data should be independent, the manufacturing process should be capable of quality depending on the type of Control Chart, a sample that is large enough (sometimes made of several elements) must be taken. Currently, a shift can be observed from mass production towards short production runs, which causes the proper use of the traditional approach to be impossible. In recent years, control charts are once again in the spotlight, and consequently many scientists, i.e. Reynolds, Zimmer, Costa, Calvin and Chan have undertaken the task to adapt the classic idea of keeping Control Charts to modern conditions of production. The development of science in this area allows for the avoidance of making major mistakes in the conduct of Control Charts and for making the wrong decisions based on erroneous analysis. However, the appearance of new literature pieces implies the need to classify Control Charts, therefore, this article describes the idea of conduct, the most important assumptions and distribution of classical Shewhart's Control Charts, as well as a suggestion for the distribution of advanced Control Charts that meet the needs of the currently used production types. The work also contains a concise description of the chosen control charts as well as the threats resulting from their inappropriate selection. This elaboration is an extension to the article of Czabak-Górska (2017).
- Open Access
- 22 September 2017
- Published by CBU Research Institute in CBU International Conference Proceedings
- Vol. 5, 94-98
AN ANALYSIS OF OCCURRENCE OF THE HIDDEN FACTORY PHENOMENON IN PRODUCTION – BASED ON THE SELECTED YIELDS – CASE STUDY
This article describes a procedure for identifying the phenomenon of ‘hidden factory’ based on classic and Six Sigma yields, a term attributed to wastefulness during production. The paper presents a study that aims to establish a method for improving the efficiency of production by eliminating this wastefulness. The first part of this article presents a synthesized review of the current literature regarding the negative influence of the ‘hidden factory’ on production efficiency. The theoretical considerations involve a case study with quantitative data collected from a metal foundry of Zawiercie in Poland, which specializes in producing iron castings, including connectors for water, gas, and vapor installations, as well as minor machine castings. The results indicate a hidden factory within this company’s production line. The analyzed example underlines the efficiency of the applied method for detecting the undesired phenomenon of the ‘hidden factory.'
- 22 September 2017
- Published by CBU Research Institute in CBU International Conference Proceedings
- Vol. 5, 94-98
Open AccessAN ANALYSIS OF OCCURRENCE OF THE HIDDEN FACTORY PHENOMENON IN PRODUCTION – BASED ON THE SELECTED YIELDS – CASE STUDY
This article describes a procedure for identifying the phenomenon of ‘hidden factory’ based on classic and Six Sigma yields, a term attributed to wastefulness during production. The paper presents a study that aims to establish a method for improving the efficiency of production by eliminating this wastefulness. The first part of this article presents a synthesized review of the current literature regarding the negative influence of the ‘hidden factory’ on production efficiency. The theoretical considerations involve a case study with quantitative data collected from a metal foundry of Zawiercie in Poland, which specializes in producing iron castings, including connectors for water, gas, and vapor installations, as well as minor machine castings. The results indicate a hidden factory within this company’s production line. The analyzed example underlines the efficiency of the applied method for detecting the undesired phenomenon of the ‘hidden factory.'
- Open Access
- 19 September 2015
- Published by CBU Research Institute in CBU International Conference Proceedings
- Vol. 3, 158-164
APPLICATION OF THE GROSS ERROR ANALYSIS TO DISORDERS IDENTIFICATION IN MANUFACTURING PROCESS—A CASE STUDY
The article contains a description of the procedures to be followed in the analysis of the stability of the manufacturing processes based on an Individual Control Chart (XI) and a Moving Range (MR) Control Chart. In the following part of the article, we present the three-sigma rule and the confidence intervals for the average, which enable the elimination of random errors caused by, e.g. an improper conducting of a measurement.Summary of the theoretical considerations is a study case in which survey data from a company, producing car seat frames, are used. The conducted study indicates that the elimination of Gross Error is significant to identify and eliminate the variability of production processes.
- 19 September 2015
- Published by CBU Research Institute in CBU International Conference Proceedings
- Vol. 3, 158-164
Open AccessAPPLICATION OF THE GROSS ERROR ANALYSIS TO DISORDERS IDENTIFICATION IN MANUFACTURING PROCESS—A CASE STUDY
The article contains a description of the procedures to be followed in the analysis of the stability of the manufacturing processes based on an Individual Control Chart (XI) and a Moving Range (MR) Control Chart. In the following part of the article, we present the three-sigma rule and the confidence intervals for the average, which enable the elimination of random errors caused by, e.g. an improper conducting of a measurement.Summary of the theoretical considerations is a study case in which survey data from a company, producing car seat frames, are used. The conducted study indicates that the elimination of Gross Error is significant to identify and eliminate the variability of production processes.