Ezwan Mahmoud Mahdi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Ezwan Mahmoud Mahdi has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
- Jin-Chong Tan
Multifunctional Materials & Composites (MMC) Laboratory, Department of Engineering Science, University of Oxford, Oxford, UK
7 shared publications Paulus Wilfred
Malaysian Nuclear Agency Bangi
5 shared publications- Kirill Titov
Multifunctional Materials and Composites (MMC) Laboratory Department of Engineering Science University of Oxford Parks Road Oxford OX1 3PJ UK
3 shared publications Meor Yusoff Meor Sulaiman
Malaysian Nuclear Agency Bangi
3 shared publicationsD. Parimala
Material Technology Group, Industrial Technology Group, Malaysian Nuclear Agency, Bangi 43000, Kajang, Selangor Darul Ehsan, Malaysia
2 shared publicationsMasliana Muslimin
Malaysian Nuclear Agency Bangi
2 shared publications
Latest Publications
- Open Access
- 20 March 2025
- Published by Polish Academy of Sciences Chancellery in Archives of Metallurgy and Materials
- p. 199-209
Molecular Interactions Between Polyurethane and UiO-66 in Polymer-MOF Nanocomposites: Microstructural and Mechanical Effects
The demand for polymer-based nanocomposite-reinforced nanoporous materials is becoming essential in sustainable development studies. Integrating nanoporous materials such as Metal-Organic Frameworks (MOFs) in polymer matrices is essential for developing sustainable advanced materials. Combining MOFs and polymer matrices can produce a hybrid material with improved mechanical strength and stability relative to its constituents. This study aims to elucidate the effect of synthesised UiO-66 nanoparticles in a polyurethane (PU) matrix on the subsequent hybrid materials’ microstructural and mechanical properties. UiO-66 nanoparticles were synthesised at 120°C, 130°C, and 140°C. The nanoparticles and subsequent nanocomposite were characterised using X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET), and Field Emission-Secondary Electron Microscopy (FE-SEM). The experimental findings indicate that the UiO-66 nanoparticles synthesised at 130°C exhibited a highly desirable crystal structure and effective adsorption properties, and the nanoparticles synthesised at this temperature were then used to reinforce PU, forming a polymer-MOF nanocomposite. The mechanical properties of the resulting nanocomposite were determined using tensile and nanoindentation tests. The UiO-66 nanoparticles were incorporated into PU matrices at various weight percentages (10 wt.%, 20 wt.%, 30 wt.%, and 40 wt.%) via the solution casting technique. The results indicated that 30 wt.% UiO-66 in the polymer nanocomposite exhibits the best mechanical properties, and loading the polymer nanocomposite beyond 30 wt.% is more likely to result in nanoparticle agglomeration and brittle behaviours
- 20 March 2025
- Published by Polish Academy of Sciences Chancellery in Archives of Metallurgy and Materials
- p. 199-209
Open AccessMolecular Interactions Between Polyurethane and UiO-66 in Polymer-MOF Nanocomposites: Microstructural and Mechanical Effects
The demand for polymer-based nanocomposite-reinforced nanoporous materials is becoming essential in sustainable development studies. Integrating nanoporous materials such as Metal-Organic Frameworks (MOFs) in polymer matrices is essential for developing sustainable advanced materials. Combining MOFs and polymer matrices can produce a hybrid material with improved mechanical strength and stability relative to its constituents. This study aims to elucidate the effect of synthesised UiO-66 nanoparticles in a polyurethane (PU) matrix on the subsequent hybrid materials’ microstructural and mechanical properties. UiO-66 nanoparticles were synthesised at 120°C, 130°C, and 140°C. The nanoparticles and subsequent nanocomposite were characterised using X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET), and Field Emission-Secondary Electron Microscopy (FE-SEM). The experimental findings indicate that the UiO-66 nanoparticles synthesised at 130°C exhibited a highly desirable crystal structure and effective adsorption properties, and the nanoparticles synthesised at this temperature were then used to reinforce PU, forming a polymer-MOF nanocomposite. The mechanical properties of the resulting nanocomposite were determined using tensile and nanoindentation tests. The UiO-66 nanoparticles were incorporated into PU matrices at various weight percentages (10 wt.%, 20 wt.%, 30 wt.%, and 40 wt.%) via the solution casting technique. The results indicated that 30 wt.% UiO-66 in the polymer nanocomposite exhibits the best mechanical properties, and loading the polymer nanocomposite beyond 30 wt.% is more likely to result in nanoparticle agglomeration and brittle behaviours
- Open Access
- 19 July 2023
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 7 (7) , 073402
Quantum tunneling rotor as a sensitive atomistic probe of guests in a metal-organic framework
Quantum tunneling rotors in a zeolitic imidazolate framework ZIF-8 can provide insights into local gas adsorption sites and local dynamics of porous structure, which are inaccessible to standard physisorption or x-ray diffraction sensitive primarily to long-range order. Using in situ high-resolution inelastic neutron scattering at 3 K, we follow the evolution of methyl tunneling with respect to the number of dosed gas molecules. While nitrogen adsorption decreases the energy of the tunneling peak, and ultimately hinders it completely (0.33 meV to zero), argon substantially increases the energy to 0.42 meV. Ab initio calculations of the rotational barrier of ZIF-8 show an exception to the reported adsorption sites hierarchy, resulting in anomalous adsorption behavior and linker dynamics at subatmospheric pressure. The findings reveal quantum tunneling rotors in metal-organic frameworks as a sensitive atomistic probe of local physicochemical phenomena.
- 19 July 2023
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 7 (7) , 073402
Open AccessQuantum tunneling rotor as a sensitive atomistic probe of guests in a metal-organic framework
Quantum tunneling rotors in a zeolitic imidazolate framework ZIF-8 can provide insights into local gas adsorption sites and local dynamics of porous structure, which are inaccessible to standard physisorption or x-ray diffraction sensitive primarily to long-range order. Using in situ high-resolution inelastic neutron scattering at 3 K, we follow the evolution of methyl tunneling with respect to the number of dosed gas molecules. While nitrogen adsorption decreases the energy of the tunneling peak, and ultimately hinders it completely (0.33 meV to zero), argon substantially increases the energy to 0.42 meV. Ab initio calculations of the rotational barrier of ZIF-8 show an exception to the reported adsorption sites hierarchy, resulting in anomalous adsorption behavior and linker dynamics at subatmospheric pressure. The findings reveal quantum tunneling rotors in metal-organic frameworks as a sensitive atomistic probe of local physicochemical phenomena.
- 3 May 2018
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 9 (10) , 2678-2684
Dielectric Properties of Zeolitic Imidazolate Frameworks in the Broad-Band Infrared Regime
The field of metal-organic framework (MOF) materials is rapidly advancing towards practical applications, consequently it is urgent to achieve a better understanding and precise control of their physical properties. Yet research on the dielectric properties of MOFs is at its infancy, where studies are confined to the static dielectric behavior or lower frequency response (kHz-MHz) only. Herein we present the pioneering use of synchrotron-based infrared reflectivity experiments, combined with density functional theory (DFT) calculations to accurately determine the dynamic dielectric properties of zeolitic imidazolate frameworks (ZIFs: a topical family of MOFs). We show, for the first time, the frequency-dependent dielectric response of representative ZIF compounds, bridging the near-, mid-, and far-infrared (terahertz THz) broadband frequencies. We establish the structure-property relations as a function of framework porosity and structural change. Our comprehensive results will be paving the way for novel ZIF-based terahertz applications, such as infrared optical sensors and high-speed wireless communications.
- 3 May 2018
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 9 (10) , 2678-2684
Dielectric Properties of Zeolitic Imidazolate Frameworks in the Broad-Band Infrared Regime
The field of metal-organic framework (MOF) materials is rapidly advancing towards practical applications, consequently it is urgent to achieve a better understanding and precise control of their physical properties. Yet research on the dielectric properties of MOFs is at its infancy, where studies are confined to the static dielectric behavior or lower frequency response (kHz-MHz) only. Herein we present the pioneering use of synchrotron-based infrared reflectivity experiments, combined with density functional theory (DFT) calculations to accurately determine the dynamic dielectric properties of zeolitic imidazolate frameworks (ZIFs: a topical family of MOFs). We show, for the first time, the frequency-dependent dielectric response of representative ZIF compounds, bridging the near-, mid-, and far-infrared (terahertz THz) broadband frequencies. We establish the structure-property relations as a function of framework porosity and structural change. Our comprehensive results will be paving the way for novel ZIF-based terahertz applications, such as infrared optical sensors and high-speed wireless communications.
- Top Cited Papers
- 1 May 2018
- Published by Elsevier in Materials & Design
- Vol. 146, 28-37
Mechanical metamaterials with star-shaped pores exhibiting negative and zero Poisson's ratio
- 1 May 2018
- Published by Elsevier in Materials & Design
- Vol. 146, 28-37
Top Cited PapersMechanical metamaterials with star-shaped pores exhibiting negative and zero Poisson's ratio
- Open Access
- 1 August 2017
- Published by AIP Publishing in APL Materials
- Vol. 5 (8) , 086104
Thermo-mechanical properties of mixed-matrix membranes encompassing zeolitic imidazolate framework-90 and polyvinylidine difluoride: ZIF-90/PVDF nanocomposites
Mixed-matrix membranes are contemporary nanocomposite materials with many potential applications, from liquid and gas separations to chemical sensors and biomedicine. We report fabrication of a metal-organic framework (MOF)-based nanocomposite, combining polyvinylidene difluoride (PVDF) polymer as the matrix and ZIF-90 nanocrystals of up to 30 wt. % filler content. The focus is to establish the processing—microstructure—mechanical property relationships. We reveal the importance for quantifying salient effects of the filler contents: (i) tensile strength degrades beyond 10 wt. % and (ii) mechanical toughness declines due to membrane embrittlement. These are vital mechanical aspects but widely overlooked in the emergent field of MOF membranes and composites.
- 1 August 2017
- Published by AIP Publishing in APL Materials
- Vol. 5 (8) , 086104
Open AccessThermo-mechanical properties of mixed-matrix membranes encompassing zeolitic imidazolate framework-90 and polyvinylidine difluoride: ZIF-90/PVDF nanocomposites
Mixed-matrix membranes are contemporary nanocomposite materials with many potential applications, from liquid and gas separations to chemical sensors and biomedicine. We report fabrication of a metal-organic framework (MOF)-based nanocomposite, combining polyvinylidene difluoride (PVDF) polymer as the matrix and ZIF-90 nanocrystals of up to 30 wt. % filler content. The focus is to establish the processing—microstructure—mechanical property relationships. We reveal the importance for quantifying salient effects of the filler contents: (i) tensile strength degrades beyond 10 wt. % and (ii) mechanical toughness declines due to membrane embrittlement. These are vital mechanical aspects but widely overlooked in the emergent field of MOF membranes and composites.
- Open Access
- 5 April 2017
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 5 (19) , 8954-8963
Kinetically controlled synthesis of two-dimensional Zr/Hf metal–organic framework nanosheets via a modulated hydrothermal approach
The kinetically controlled synthesis of two-dimensional (2D) metal–organic framework (MOF) nanosheets in the absence of surfactants is rewarding but challenging. We herein describe such a surfactant-free bottom-up synthesis of 2D stable Zr/Hf MOF nanosheets named NUS-8 composed of Zr6O4(OH)4 or Hf6O4(OH)4 clusters and 1,3,5-benzenetribenzoate (BTB3−) via a modulated hydrothermal approach, which allows fast precipitation and stabilization of intermediate 2D metal–organic nanosheets due to the heterogeneous synthetic conditions. Structural analyses based on synchrotron powder X-ray diffraction data confirm the 2D layered structure of NUS-8 with uniform porosity and highly accessible Lewis acid sites suitable for heterogeneous catalysis. 2D NUS-8 nanosheets exhibit excellent stabilities superior to those of their interlocked 3D MOF analogues synthesized from solvothermal synthesis, which are evidenced by comprehensive stability tests. In particular, dynamic mechanical analysis (DMA) experiments suggest that the stability of 2D NUS-8 nanosheets may come from a combination of interlayer shear sliding deformation and out-of-plane tension/compression modes whereas their interlocked 3D architecture is strictly constrained. Because of the alleviated framework strain and accessible active sites, NUS-8 nanosheets exhibit excellent stability and catalytic activity superior to those of their interlocked 3D MOF counterparts. Our work has demonstrated the potential of a modulated hydrothermal approach in the kinetically controlled synthesis of 2D MOF nanosheets, shedding light on future synthesis of 2D hybrid inorganic–organic materials.
- 5 April 2017
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 5 (19) , 8954-8963
Open AccessKinetically controlled synthesis of two-dimensional Zr/Hf metal–organic framework nanosheets via a modulated hydrothermal approach
The kinetically controlled synthesis of two-dimensional (2D) metal–organic framework (MOF) nanosheets in the absence of surfactants is rewarding but challenging. We herein describe such a surfactant-free bottom-up synthesis of 2D stable Zr/Hf MOF nanosheets named NUS-8 composed of Zr6O4(OH)4 or Hf6O4(OH)4 clusters and 1,3,5-benzenetribenzoate (BTB3−) via a modulated hydrothermal approach, which allows fast precipitation and stabilization of intermediate 2D metal–organic nanosheets due to the heterogeneous synthetic conditions. Structural analyses based on synchrotron powder X-ray diffraction data confirm the 2D layered structure of NUS-8 with uniform porosity and highly accessible Lewis acid sites suitable for heterogeneous catalysis. 2D NUS-8 nanosheets exhibit excellent stabilities superior to those of their interlocked 3D MOF analogues synthesized from solvothermal synthesis, which are evidenced by comprehensive stability tests. In particular, dynamic mechanical analysis (DMA) experiments suggest that the stability of 2D NUS-8 nanosheets may come from a combination of interlayer shear sliding deformation and out-of-plane tension/compression modes whereas their interlocked 3D architecture is strictly constrained. Because of the alleviated framework strain and accessible active sites, NUS-8 nanosheets exhibit excellent stability and catalytic activity superior to those of their interlocked 3D MOF counterparts. Our work has demonstrated the potential of a modulated hydrothermal approach in the kinetically controlled synthesis of 2D MOF nanosheets, shedding light on future synthesis of 2D hybrid inorganic–organic materials.
- Open Access
- 13 October 2014
- Published by AIP Publishing in APL Materials
- Vol. 2 (12) , 124101
Fine-scale tribological performance of zeolitic imidazolate framework (ZIF-8) based polymer nanocomposite membranes
We combined zeolitic imidazolate framework nanoparticles (ZIF-8: ˜150 nm diameter) with Matrimid® 5218 polymer to form permeable mixed matrix membranes, featuring different weight fractions of nanoparticles (up to 30 wt. % loading). We used ball-on-disc micro-tribological method to measure the frictional coefficient of the nanocomposite membranes, as a function of nanoparticle loading and annealing heat treatment. The tribological results reveal that the friction and wear of the unannealed samples rise steadily with greater nanoparticle loading because ZIF-8 is relatively harder than the matrix, thus promoting abrasive wear mechanism. After annealing, however, we discover that the nanocomposites display an appreciably lower friction and wear damage compared with the unannealed counterparts. Evidence shows that the major improvement in tribological performance is associated with the greater amounts of wear debris derived from the annealed nanocomposite membranes. We propose that detached Matrimid-encapsulated ZIF-8 nanoparticles could function as “spacers,” which are capable of not only reducing direct contact between two rubbing surfaces but also enhancing free-rolling under the action of lateral forces.
- 13 October 2014
- Published by AIP Publishing in APL Materials
- Vol. 2 (12) , 124101
Open AccessFine-scale tribological performance of zeolitic imidazolate framework (ZIF-8) based polymer nanocomposite membranes
We combined zeolitic imidazolate framework nanoparticles (ZIF-8: ˜150 nm diameter) with Matrimid® 5218 polymer to form permeable mixed matrix membranes, featuring different weight fractions of nanoparticles (up to 30 wt. % loading). We used ball-on-disc micro-tribological method to measure the frictional coefficient of the nanocomposite membranes, as a function of nanoparticle loading and annealing heat treatment. The tribological results reveal that the friction and wear of the unannealed samples rise steadily with greater nanoparticle loading because ZIF-8 is relatively harder than the matrix, thus promoting abrasive wear mechanism. After annealing, however, we discover that the nanocomposites display an appreciably lower friction and wear damage compared with the unannealed counterparts. Evidence shows that the major improvement in tribological performance is associated with the greater amounts of wear debris derived from the annealed nanocomposite membranes. We propose that detached Matrimid-encapsulated ZIF-8 nanoparticles could function as “spacers,” which are capable of not only reducing direct contact between two rubbing surfaces but also enhancing free-rolling under the action of lateral forces.
- 17 April 2014
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 925, 210-214
Study on Indoor Nitrous Oxide Gas Neutralization by Using Anatase and Rutile Nanotitania
Nitrous oxide is generally emitted from industry through fossil fuel combustion thus giving adverse effect to human health and environments. Catalytic converter is the common method used to neutralize this hazardous gas but the high cost of precious metals had limited its application. Nanotitania could neutralize nitrous oxide by the photocatalytic phenomenon and the material is effective as it has small band gap energy and large surface area. In this study, we produced both anatase and rutile crystalline phase nanotitania from a local titanium mineral as the starting material. A significant improvement to the properties of our nanotitania is due to the present of naturally doped neodymium and zirconium ions that are present in the titanium mineral. This make the band gaps for both anatase and rutile to be smaller and effective in photocatalytic process. Three different nanotitania formulations, pure anatase, pure rutile and mixed rutile and anatase phases, were tried in the study and the results showed that all these three formulations were able to neutralize the nitrous oxide within a very short duration. Comparative study was then performed with a blank sample and the result shows there is still significant amount of nitrous oxide present after the 2 hours run.
- 17 April 2014
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 925, 210-214
Study on Indoor Nitrous Oxide Gas Neutralization by Using Anatase and Rutile Nanotitania
Nitrous oxide is generally emitted from industry through fossil fuel combustion thus giving adverse effect to human health and environments. Catalytic converter is the common method used to neutralize this hazardous gas but the high cost of precious metals had limited its application. Nanotitania could neutralize nitrous oxide by the photocatalytic phenomenon and the material is effective as it has small band gap energy and large surface area. In this study, we produced both anatase and rutile crystalline phase nanotitania from a local titanium mineral as the starting material. A significant improvement to the properties of our nanotitania is due to the present of naturally doped neodymium and zirconium ions that are present in the titanium mineral. This make the band gaps for both anatase and rutile to be smaller and effective in photocatalytic process. Three different nanotitania formulations, pure anatase, pure rutile and mixed rutile and anatase phases, were tried in the study and the results showed that all these three formulations were able to neutralize the nitrous oxide within a very short duration. Comparative study was then performed with a blank sample and the result shows there is still significant amount of nitrous oxide present after the 2 hours run.