Thomas Heiser
Research Subjects
Thomas Heiser has a total of 212 co-authors. Here are the top co-authors by number of shared publications:
- Nicolas Leclerc
Université de Strasbourg
36 shared publications - Patrick Lévêque
ICube Laboratory University of Strasbourg‐CNRS Strasbourg France
32 shared publications - Benoît Heinrich
Institut de Physique et Chimie des Matériaux de Strasbourg (IPCMS), UMR 7504, CNRS-Université de Strasbourg, F-67034 Strasbourg, France
11 shared publications Sadiara Fall
Laboratoire des Sciences de l’Ingénieur, de l’Informatique et de l’Imagerie (ICube Research Institute), Université de Strasbourg, Centre National de la Recherche Scientifique, 23, Rue du Loess, Strasbourg Cedex 2 67037, France
10 shared publications- Olzhas. A. Ibraikulov
Laboratoire ICube
9 shared publications - Christos L. Chochos
Institute of Chemical Biology, National Hellenic Research Foundation, 48 Vassileos Constantinou Avenue, Athens 11635, Greece
6 shared publications
Latest Publications
- Open Access
- 4 September 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (39) , 33798-33807
Exciton dynamics in planar dumbbell-shaped electron-donor molecules for organic optoelectronics
We study exciton transport in bridged-columnar assemblies of dumbbell-shaped molecules by exciton–exciton annihilation and transient photoluminescence microscopy. We find that crystallization yields a twofold increase in exciton diffusion length.
- 4 September 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (39) , 33798-33807
Open AccessExciton dynamics in planar dumbbell-shaped electron-donor molecules for organic optoelectronics
We study exciton transport in bridged-columnar assemblies of dumbbell-shaped molecules by exciton–exciton annihilation and transient photoluminescence microscopy. We find that crystallization yields a twofold increase in exciton diffusion length.
- 19 August 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 129 (34) , 8832-8840
Exciton Radiative Lifetime and Diffusion Length from First-Principles Atomic Trajectories: Method Assessment for P3HT
Organic photovoltaic (OPV) technology offers a solution to the global demand for sustainable energy production and harvesting due to its affordability, versatility, and moderate environmental impact. Recent advancements have led to an increased efficiency in bulk heterojunction (BHJ) solar cells, making practical applications feasible. However, these advancements have also raised fundamental questions regarding exciton transport mechanisms. A precise understanding of the relationship between the exciton diffusion length and material structure is crucial for improvements and applications. We formerly assessed a method to extract the exciton diffusion coefficient [Diarra, C. O. Phys. Chem. Chem. Phys. 2023, 25, 15539-15546] via first-principles dynamical simulations in the excited state. Here, we propose a novel approach to compute the radiative lifetime using the same method. This provides an additional crucial parameter contributing to the exciton diffusion length. We benchmark the validity of the method on a specific semiconducting polymer, poly(3-hexylthiophene) (P3HT). The resulting exciton diffusion length is found to be in close agreement with the available experimental data.
- 19 August 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 129 (34) , 8832-8840
Exciton Radiative Lifetime and Diffusion Length from First-Principles Atomic Trajectories: Method Assessment for P3HT
Organic photovoltaic (OPV) technology offers a solution to the global demand for sustainable energy production and harvesting due to its affordability, versatility, and moderate environmental impact. Recent advancements have led to an increased efficiency in bulk heterojunction (BHJ) solar cells, making practical applications feasible. However, these advancements have also raised fundamental questions regarding exciton transport mechanisms. A precise understanding of the relationship between the exciton diffusion length and material structure is crucial for improvements and applications. We formerly assessed a method to extract the exciton diffusion coefficient [Diarra, C. O. Phys. Chem. Chem. Phys. 2023, 25, 15539-15546] via first-principles dynamical simulations in the excited state. Here, we propose a novel approach to compute the radiative lifetime using the same method. This provides an additional crucial parameter contributing to the exciton diffusion length. We benchmark the validity of the method on a specific semiconducting polymer, poly(3-hexylthiophene) (P3HT). The resulting exciton diffusion length is found to be in close agreement with the available experimental data.
- Open Access
- 15 May 2023
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 25 (22) , 15539-15546
Exciton diffusion in poly(3-hexylthiophene) by first-principles molecular dynamics
Molecular dynamics of P3HT in the excited state: from the trajectories of electron and holes to exciton diffusion coefficients in solar cells.
- 15 May 2023
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 25 (22) , 15539-15546
Open AccessExciton diffusion in poly(3-hexylthiophene) by first-principles molecular dynamics
Molecular dynamics of P3HT in the excited state: from the trajectories of electron and holes to exciton diffusion coefficients in solar cells.
- 11 January 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (3) , 4267-4274
Self-Powered Dynamic Glazing Based on Nematic Liquid Crystals and Organic Photovoltaic Layers for Smart Window Applications
Dynamic windows allow monitoring of in-door solar radiation and thus improve user comfort and energy efficiency in buildings and vehicles. Existing technologies are, however, hampered by limitations in switching speed, energy efficiency, user control, or production costs. Here, we introduce a new concept for self-powered switchable glazing that combines a nematic liquid crystal, as an electro-optic active layer, with an organic photovoltaic material. The latter aligns the liquid crystal molecules and generates, under illumination, an electric field that changes the molecular orientation and thereby the device transmittance in the visible and near-infrared region. Small-area devices can be switched from clear to dark in hundreds of milliseconds without an external power supply. The drop in transmittance can be adjusted using a variable resistor and is shown to be reversible and stable for more than 5 h. First solution-processed large-area (15 cm2) devices are presented, and prospects for smart window applications are discussed.
- 11 January 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (3) , 4267-4274
Self-Powered Dynamic Glazing Based on Nematic Liquid Crystals and Organic Photovoltaic Layers for Smart Window Applications
Dynamic windows allow monitoring of in-door solar radiation and thus improve user comfort and energy efficiency in buildings and vehicles. Existing technologies are, however, hampered by limitations in switching speed, energy efficiency, user control, or production costs. Here, we introduce a new concept for self-powered switchable glazing that combines a nematic liquid crystal, as an electro-optic active layer, with an organic photovoltaic material. The latter aligns the liquid crystal molecules and generates, under illumination, an electric field that changes the molecular orientation and thereby the device transmittance in the visible and near-infrared region. Small-area devices can be switched from clear to dark in hundreds of milliseconds without an external power supply. The drop in transmittance can be adjusted using a variable resistor and is shown to be reversible and stable for more than 5 h. First solution-processed large-area (15 cm2) devices are presented, and prospects for smart window applications are discussed.
- Open Access
- 13 July 2022
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 3 (17) , 6853-6861
para -Azaquinodimethane based quinoidal polymers for opto-electronic applications: impact of donor units on the opto-electronic properties
para -Azaquinodimethane ( p -AQM) based quinoidal–donor (Q–D) polymers have been synthesized following a strategy for enhancing the backbone planarity and control the bond length alternation (BLA).
- 13 July 2022
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 3 (17) , 6853-6861
Open Accesspara -Azaquinodimethane based quinoidal polymers for opto-electronic applications: impact of donor units on the opto-electronic properties
para -Azaquinodimethane ( p -AQM) based quinoidal–donor (Q–D) polymers have been synthesized following a strategy for enhancing the backbone planarity and control the bond length alternation (BLA).
- Open Access
- 30 November 2021
- Published by Royal Society of Chemistry (RSC) in Materials Chemistry Frontiers
- Vol. 6 (2) , 225-236
Dispiroacridine-indacenobisthiophene positional isomers: impact of the bridge on the physicochemical properties
We report the influence of positional isomerism on the electronic (electrochemical HOMO/LUMO energy levels), photophysical and physical properties (molecular organization, crystallinity and phase transitions) and charge transport properties of dispiroacridine-indacenobisthiophene positional isomers. The isomers differ from the central indacenobisthiophene (IDT) core, which displays either para or meta linkages. We show that the spiro-connected phenylacridine bridges have a significant influence on all these properties and particularly on the charge transport mobility values, which were found to be higher in the meta isomer than in the para isomer. This finding is different to what was reported in the literature for the other couples of IDT-based isomers and shows the key role played by the spiro-connected fragments in these molecular systems.
- 30 November 2021
- Published by Royal Society of Chemistry (RSC) in Materials Chemistry Frontiers
- Vol. 6 (2) , 225-236
Open AccessDispiroacridine-indacenobisthiophene positional isomers: impact of the bridge on the physicochemical properties
We report the influence of positional isomerism on the electronic (electrochemical HOMO/LUMO energy levels), photophysical and physical properties (molecular organization, crystallinity and phase transitions) and charge transport properties of dispiroacridine-indacenobisthiophene positional isomers. The isomers differ from the central indacenobisthiophene (IDT) core, which displays either para or meta linkages. We show that the spiro-connected phenylacridine bridges have a significant influence on all these properties and particularly on the charge transport mobility values, which were found to be higher in the meta isomer than in the para isomer. This finding is different to what was reported in the literature for the other couples of IDT-based isomers and shows the key role played by the spiro-connected fragments in these molecular systems.
- 18 November 2021
- Published by Royal Society of Chemistry (RSC) in Molecular Systems Design & Engineering
- Vol. 7 (2) , 182-195
Selection of green solvents for organic photovoltaics by reverse engineering
We propose a new methodology involving reverse design of solvent molecules and evaluation of their molecular properties for a more efficient and less empirical selection of green solvents for organic photovoltaic device fabrication.
- 18 November 2021
- Published by Royal Society of Chemistry (RSC) in Molecular Systems Design & Engineering
- Vol. 7 (2) , 182-195
Selection of green solvents for organic photovoltaics by reverse engineering
We propose a new methodology involving reverse design of solvent molecules and evaluation of their molecular properties for a more efficient and less empirical selection of green solvents for organic photovoltaic device fabrication.
- 25 October 2021
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 9 (43) , 24315-24324
Efficient 3D charge transport in planar triazatruxene-based dumbbell-shaped molecules forming a bridged columnar phase
Planar conjugated molecular backbones are essential for achieving high charge carrier mobilities along molecular π-stacking directions but are often concomitant with poor charge transport in other directions. This is particularly the case for molecules that are functionalized with alkyl chains, which ensure good processability in solution but introduce detrimental insulating regions. Here, we show that soluble planar dumbbell-shaped molecules, composed of two triazatruxene (TAT) units covalently bonded to a central thiophene–thienopyrroledione–thiophene (TPD) segment self-assemble into an original structure that allows efficient 3D charge transport. Grazing-incidence wide-angle X-ray scattering investigations as well as micro-focus X-ray experiments on single crystals reveal that the TAT derivatives form a columnar-nematic mesophase in which columns of stacked TAT units spaced by molten chains are interconnected by TPD bridges. Upon annealing, a crystalline phase, stemming from the parent hexagonal mesophase, is obtained with the molecular stacking direction lying in-plane. Transport measurements in the crystalline phase reveal an unusually high out-of-plane hole mobility of 0.17 cm2 V−1 s−1 and a lower limit for the in-plane mobility of 0.05 cm2 V−1 s−1. The results suggest that the TPD segments bridging neighboring stacks of TAT columns are responsible for efficient hole transport in 3D.
- 25 October 2021
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 9 (43) , 24315-24324
Efficient 3D charge transport in planar triazatruxene-based dumbbell-shaped molecules forming a bridged columnar phase
Planar conjugated molecular backbones are essential for achieving high charge carrier mobilities along molecular π-stacking directions but are often concomitant with poor charge transport in other directions. This is particularly the case for molecules that are functionalized with alkyl chains, which ensure good processability in solution but introduce detrimental insulating regions. Here, we show that soluble planar dumbbell-shaped molecules, composed of two triazatruxene (TAT) units covalently bonded to a central thiophene–thienopyrroledione–thiophene (TPD) segment self-assemble into an original structure that allows efficient 3D charge transport. Grazing-incidence wide-angle X-ray scattering investigations as well as micro-focus X-ray experiments on single crystals reveal that the TAT derivatives form a columnar-nematic mesophase in which columns of stacked TAT units spaced by molten chains are interconnected by TPD bridges. Upon annealing, a crystalline phase, stemming from the parent hexagonal mesophase, is obtained with the molecular stacking direction lying in-plane. Transport measurements in the crystalline phase reveal an unusually high out-of-plane hole mobility of 0.17 cm2 V−1 s−1 and a lower limit for the in-plane mobility of 0.05 cm2 V−1 s−1. The results suggest that the TPD segments bridging neighboring stacks of TAT columns are responsible for efficient hole transport in 3D.
- Open Access
- 25 May 2021
- Published by Taylor & Francis in Liquid Crystals
- Vol. 48 (15) , 2086-2096
Two-dimensional snapshot measurement of surface variation of anchoring in liquid crystal cells
Enhanced, photoactive response can be realised by integrating liquid crystals with photoalignment or photoconductive alignment layers. Such cells, asymmetric by design, need to be monitored for the stability and uniformity, especially in the regions exposed to light. In this work, we report on an integrated, versatile model and technique to characterise their core parameters as well as more subtle effects, such as the strength of anchoring energy. The snapshot method also provides two-dimensional maps of the cells’ thickness, pretilt angle and uniformity. Graphical abstract
- 25 May 2021
- Published by Taylor & Francis in Liquid Crystals
- Vol. 48 (15) , 2086-2096
Open AccessTwo-dimensional snapshot measurement of surface variation of anchoring in liquid crystal cells
Enhanced, photoactive response can be realised by integrating liquid crystals with photoalignment or photoconductive alignment layers. Such cells, asymmetric by design, need to be monitored for the stability and uniformity, especially in the regions exposed to light. In this work, we report on an integrated, versatile model and technique to characterise their core parameters as well as more subtle effects, such as the strength of anchoring energy. The snapshot method also provides two-dimensional maps of the cells’ thickness, pretilt angle and uniformity. Graphical abstract
- 18 May 2021
- Published by Wiley in European Journal of Organic Chemistry
- Vol. 2021 (22) , 3170-3177
Regioisomers of Organic Semiconducting Dumbbell‐Shaped Molecules: Synthesis and Structure‐Properties Relationship
Two new dumbbell‐shaped molecules based on two solubilizing and structuring triazatruxene (TAT) units linked by a central chromophore were synthesized and studied. The central chromophore was an electro‐deficient fluorene‐malononitrile (FM) unit, that can be functionalized symmetrically on two different positions, giving rise to two positional isomers, called TAT‐pFM and TAT‐mFM, when the TATs are connected to the 2,7‐ and 3,6‐positions, respectively. The two isomers exhibited different electronic conjugation pathways that drastically affect their absorption properties and energy levels. Moreover, while TAT‐pFM was organized in a stable 3D mesomorphic structure from room‐temperature to the melting point, TAT‐mFM remained crystalline and decomposed before melting. Finally, despite a lower hole mobility, the TAT‐mFM exhibited the highest Power Conversion Efficiency (PCE) of about 2 % in organic solar cells. This higher PCE was attributed essentially to the pronounced internal charge transfer band contribution to the charge photogeneration observed in TAT‐mFM solar cells.
- 18 May 2021
- Published by Wiley in European Journal of Organic Chemistry
- Vol. 2021 (22) , 3170-3177
Regioisomers of Organic Semiconducting Dumbbell‐Shaped Molecules: Synthesis and Structure‐Properties Relationship
Two new dumbbell‐shaped molecules based on two solubilizing and structuring triazatruxene (TAT) units linked by a central chromophore were synthesized and studied. The central chromophore was an electro‐deficient fluorene‐malononitrile (FM) unit, that can be functionalized symmetrically on two different positions, giving rise to two positional isomers, called TAT‐pFM and TAT‐mFM, when the TATs are connected to the 2,7‐ and 3,6‐positions, respectively. The two isomers exhibited different electronic conjugation pathways that drastically affect their absorption properties and energy levels. Moreover, while TAT‐pFM was organized in a stable 3D mesomorphic structure from room‐temperature to the melting point, TAT‐mFM remained crystalline and decomposed before melting. Finally, despite a lower hole mobility, the TAT‐mFM exhibited the highest Power Conversion Efficiency (PCE) of about 2 % in organic solar cells. This higher PCE was attributed essentially to the pronounced internal charge transfer band contribution to the charge photogeneration observed in TAT‐mFM solar cells.