A. M. Tamondong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
A. M. Tamondong has a total of 56 co-authors. Here are the top co-authors by number of shared publications:
- Ariel Conferido Blanco
Department of Geodetic Engineering, University of the Philippines Diliman, Quezon City, Philippines
7 shared publications - Kayziel Martinez
Department of Geodetic Engineering, University of the Philippines – Diliman, Quezon City, Philippines
3 shared publications - Kazuo Nadaoka
School of Environment and Society, Tokyo Institute of Technology, Tokyo, Japan
3 shared publications R. V. Ramos
Training Center for Applied Geodesy and Photogrammetry, University of the Philippines, Diliman, Quezon City, Philippines
3 shared publications- Bernadette Anne Recto
Training Center for Applied Geodesy and Photogrammetry, University of the Philippines, Diliman, Quezon City, Philippines
2 shared publications - Christian Gumbao Candido
Space Information and Infrastructure Bureau, Philippine Space Agency, Quezon City 1109, Philippines
2 shared publications
Latest Publications
- Open Access
- 12 November 2024
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-5-2, 55-60
Advancing Blue Carbon Knowledge: Leveraging Geomatics for Capacity Building through the BlueCARES Project
Mangrove forests and seagrass meadows, collectively termed as blue carbon ecosystems (BCEs), play a pivotal role in carbon sequestration and climate mitigation. Blue carbon research enables advancing scientific knowledge and gaining insights into their current state, which is crucial for making informed decisions on its conservation and management practices. The Japan International Cooperation Agency (JICA) launched the “Comprehensive Assessment and Conservation of Blue Carbon (BC) Ecosystems and their Services in the Coral Triangle” or BlueCARES to pioneer joint research on blue carbon ecosystems and formulate conservation strategies at local and national levels. BlueCARES aims to establish a robust Blue Carbon Strategy and initiate the establishment of the Blue Carbon Network (BCnet), convening various stakeholders, including government agencies, local government units, academic institutions, and non-governmental organizations. BCnet organizes summits, workshops, and conferences to facilitate collaboration. Through capacity development initiatives, the project empowers stakeholders to actively engage in field surveys, conservation efforts, and the implementation of the Blue Carbon Strategy, even after the project concludes. This paper narrates the capacity-building engagements made by the Geomatics team, leveraging remote sensing and geospatial technologies to foster sustainable blue carbon management practices and ensure the long-term resilience of BCEs in the country.
- 12 November 2024
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-5-2, 55-60
Open AccessAdvancing Blue Carbon Knowledge: Leveraging Geomatics for Capacity Building through the BlueCARES Project
Mangrove forests and seagrass meadows, collectively termed as blue carbon ecosystems (BCEs), play a pivotal role in carbon sequestration and climate mitigation. Blue carbon research enables advancing scientific knowledge and gaining insights into their current state, which is crucial for making informed decisions on its conservation and management practices. The Japan International Cooperation Agency (JICA) launched the “Comprehensive Assessment and Conservation of Blue Carbon (BC) Ecosystems and their Services in the Coral Triangle” or BlueCARES to pioneer joint research on blue carbon ecosystems and formulate conservation strategies at local and national levels. BlueCARES aims to establish a robust Blue Carbon Strategy and initiate the establishment of the Blue Carbon Network (BCnet), convening various stakeholders, including government agencies, local government units, academic institutions, and non-governmental organizations. BCnet organizes summits, workshops, and conferences to facilitate collaboration. Through capacity development initiatives, the project empowers stakeholders to actively engage in field surveys, conservation efforts, and the implementation of the Blue Carbon Strategy, even after the project concludes. This paper narrates the capacity-building engagements made by the Geomatics team, leveraging remote sensing and geospatial technologies to foster sustainable blue carbon management practices and ensure the long-term resilience of BCEs in the country.
- Open Access
- 11 November 2024
- Published by Copernicus GmbH in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. X-5-2024, 151-158
Enhancing Government Capacity for Air Quality Management in the Philippines through Geospatial Technologies: A Case of Project AiRMoVE
Air quality management is crucial in the Philippines due to its profound implications for public health, ecosystems, and sustainable development. Project AiRMoVE, short for the Ambient Air Remote Sensing, Modeling, and Visualization Environment project, aims to enhance air quality management through engineering solutions and geospatial technologies such as remote sensing (RS), geographic information systems (GIS) and numerical modeling. Implemented by the University of the Philippines Training Center for Applied Geodesy and Photogrammetry (UP TCAGP), Project AiRMoVE collaborates with key stakeholders to identify attainment and non-attainment areas in the National Capital Region (NCR) for air quality monitoring. This paper provides an overview of Project AiRMoVE's objectives, methodologies, and outcomes, emphasizing the significance of RS and GIS in revolutionizing air quality monitoring and management. It underscores a systematic approach adopted in enhancing government capacity for air quality management -- a combination of workshops, technical trainings, and stakeholders' forums.
- 11 November 2024
- Published by Copernicus GmbH in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. X-5-2024, 151-158
Open AccessEnhancing Government Capacity for Air Quality Management in the Philippines through Geospatial Technologies: A Case of Project AiRMoVE
Air quality management is crucial in the Philippines due to its profound implications for public health, ecosystems, and sustainable development. Project AiRMoVE, short for the Ambient Air Remote Sensing, Modeling, and Visualization Environment project, aims to enhance air quality management through engineering solutions and geospatial technologies such as remote sensing (RS), geographic information systems (GIS) and numerical modeling. Implemented by the University of the Philippines Training Center for Applied Geodesy and Photogrammetry (UP TCAGP), Project AiRMoVE collaborates with key stakeholders to identify attainment and non-attainment areas in the National Capital Region (NCR) for air quality monitoring. This paper provides an overview of Project AiRMoVE's objectives, methodologies, and outcomes, emphasizing the significance of RS and GIS in revolutionizing air quality monitoring and management. It underscores a systematic approach adopted in enhancing government capacity for air quality management -- a combination of workshops, technical trainings, and stakeholders' forums.
- Open Access
- 11 November 2024
- Published by Copernicus GmbH in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. X-5-2024, 205-211
Towards Nationwide Mapping of Seagrasses in the Philippines: Empowering Students through Remote Sensing Education
Seagrasses are critical marine ecosystems facing numerous threats in the Philippines. This study aimed to develop a robust methodology for nationwide seagrass mapping using open-access satellite imagery and empower students to contribute through remote sensing education. We achieved this through a two-pronged approach: (1) developing a satellite-based mapping methodology and (2) training students to apply this method across the archipelago. Utilizing Sentinel-2 satellite images, we processed the data using SNAP and Google Earth Engine to identify seagrass beds. Before classification, the images underwent preprocessing steps including land masking, water column correction, and extraction of shallow water bathymetry. These processed layers were then stacked with Sentinel-2 bands 2, 3, 4, 8, and 11. Two classification methods, support vector machine, and random forest, were employed, and their results were compared with existing seagrass maps. Students achieved overall accuracies ranging from 70 to 90 percent. Prior to mapping activities, students received training on remote sensing techniques and seagrass ecology. This project demonstrates the potential of remote sensing for large-scale seagrass mapping and highlights the value of student engagement in marine conservation.
- 11 November 2024
- Published by Copernicus GmbH in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. X-5-2024, 205-211
Open AccessTowards Nationwide Mapping of Seagrasses in the Philippines: Empowering Students through Remote Sensing Education
Seagrasses are critical marine ecosystems facing numerous threats in the Philippines. This study aimed to develop a robust methodology for nationwide seagrass mapping using open-access satellite imagery and empower students to contribute through remote sensing education. We achieved this through a two-pronged approach: (1) developing a satellite-based mapping methodology and (2) training students to apply this method across the archipelago. Utilizing Sentinel-2 satellite images, we processed the data using SNAP and Google Earth Engine to identify seagrass beds. Before classification, the images underwent preprocessing steps including land masking, water column correction, and extraction of shallow water bathymetry. These processed layers were then stacked with Sentinel-2 bands 2, 3, 4, 8, and 11. Two classification methods, support vector machine, and random forest, were employed, and their results were compared with existing seagrass maps. Students achieved overall accuracies ranging from 70 to 90 percent. Prior to mapping activities, students received training on remote sensing techniques and seagrass ecology. This project demonstrates the potential of remote sensing for large-scale seagrass mapping and highlights the value of student engagement in marine conservation.
- Open Access
- 11 November 2024
- Published by Copernicus GmbH in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. X-5-2024, 9-15
DRONES4BLUECARBONSEAGRASS: A Capacity-Building Program for Mapping Seagrasses using Unmanned Aerial System (UAS) Technology in the Philippines
Coastal blue carbon ecosystems, such as mangrove forests and seagrass meadows, are important for various environmental functions, serving as habitats, food sources, and carbon sinks. Despite their importance, seagrass ecosystems are experiencing global decline due to numerous stressors, including anthropogenic activities. To address this, effective monitoring and management strategies are crucial. Traditional in situ surveys for seagrass monitoring are labor-intensive and time-consuming. Alternatively, remote sensing technologies, particularly satellite imagery, offer a more efficient means of mapping seagrass distribution over large areas. However, accurately assessing seagrass cover at a local scale remains challenging with satellite data alone. Recently, unmanned aerial system (UAS) technology has emerged as a promising approach for seagrass mapping. With its fine resolution and flexibility for image acquisition, UAS can provide more precise estimates of seagrass cover, complementing satellite data. This integration enhances accuracy assessments and expands data availability for training and validation purposes. Under the BlueCARES Project, a drone training program was developed to equip stakeholders with the skills needed for cost-effective UAS-based seagrass mapping. The drone training program encompasses lectures on UAS basics, flight planning, and image processing. Beyond training, collected data are used to create seagrass maps and assess seagrass density. This initiative not only advances seagrass conservation but also fosters collaboration between government agencies, academia, and local communities to achieve sustainable management of blue carbon ecosystems.
- 11 November 2024
- Published by Copernicus GmbH in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. X-5-2024, 9-15
Open AccessDRONES4BLUECARBONSEAGRASS: A Capacity-Building Program for Mapping Seagrasses using Unmanned Aerial System (UAS) Technology in the Philippines
Coastal blue carbon ecosystems, such as mangrove forests and seagrass meadows, are important for various environmental functions, serving as habitats, food sources, and carbon sinks. Despite their importance, seagrass ecosystems are experiencing global decline due to numerous stressors, including anthropogenic activities. To address this, effective monitoring and management strategies are crucial. Traditional in situ surveys for seagrass monitoring are labor-intensive and time-consuming. Alternatively, remote sensing technologies, particularly satellite imagery, offer a more efficient means of mapping seagrass distribution over large areas. However, accurately assessing seagrass cover at a local scale remains challenging with satellite data alone. Recently, unmanned aerial system (UAS) technology has emerged as a promising approach for seagrass mapping. With its fine resolution and flexibility for image acquisition, UAS can provide more precise estimates of seagrass cover, complementing satellite data. This integration enhances accuracy assessments and expands data availability for training and validation purposes. Under the BlueCARES Project, a drone training program was developed to equip stakeholders with the skills needed for cost-effective UAS-based seagrass mapping. The drone training program encompasses lectures on UAS basics, flight planning, and image processing. Beyond training, collected data are used to create seagrass maps and assess seagrass density. This initiative not only advances seagrass conservation but also fosters collaboration between government agencies, academia, and local communities to achieve sustainable management of blue carbon ecosystems.
- Open Access
- 25 April 2024
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-4/W, 437-444
DEVELOPMENT OF LAND-USE REGRESSION MODELS FOR PARTICULATE MATTER ESTIMATION IN NATIONAL CAPITAL REGION, PHILIPPINES
Regression models are commonly used to estimate unknown variables, such as environmental parameters. Multiple Linear Regression (MLR) is one of the techniques used to model air quality and measure air pollutant concentrations. Specifically, a technique called Land-Use Regression (LUR) enables the user to generate air pollutant models using geographical layers as input parameters. The study aims to generate models for fine and coarse particulate matter (PM2.5 and PM10, respectively) using LUR for the National Capital Region in 2019. Independent variables considered in this study are road network, traffic count, Normalized Difference Vegetation Index (NDVI), population density, and elevation. The final model results showed significant estimates based on the model parameters. For PM2.5, the model resulted in high values of R2 and adjusted R2 and an RMSE of 0.77 μg/m3. For PM10, model parameters showed that the generated final model for PM10 was significant with a 55% R2 value. Maps were then generated using the final LUR models of PM2.5 and PM10. The models can be improved by adding more types of input variables and longer observation periods.
- 25 April 2024
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-4/W, 437-444
Open AccessDEVELOPMENT OF LAND-USE REGRESSION MODELS FOR PARTICULATE MATTER ESTIMATION IN NATIONAL CAPITAL REGION, PHILIPPINES
Regression models are commonly used to estimate unknown variables, such as environmental parameters. Multiple Linear Regression (MLR) is one of the techniques used to model air quality and measure air pollutant concentrations. Specifically, a technique called Land-Use Regression (LUR) enables the user to generate air pollutant models using geographical layers as input parameters. The study aims to generate models for fine and coarse particulate matter (PM2.5 and PM10, respectively) using LUR for the National Capital Region in 2019. Independent variables considered in this study are road network, traffic count, Normalized Difference Vegetation Index (NDVI), population density, and elevation. The final model results showed significant estimates based on the model parameters. For PM2.5, the model resulted in high values of R2 and adjusted R2 and an RMSE of 0.77 μg/m3. For PM10, model parameters showed that the generated final model for PM10 was significant with a 55% R2 value. Maps were then generated using the final LUR models of PM2.5 and PM10. The models can be improved by adding more types of input variables and longer observation periods.
- Open Access
- 25 April 2024
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-4/W, 395-401
SUPERVISED IMAGE CLASSIFICATION MODEL FOR CORAL BLEACHING DETECTION USING A BI-TEMPORAL SENTINEL-2 IMAGE STACK
Coral reefs are among the most vulnerable ecosystems to coastal and land-based anthropogenic factors. Aside from sudden increase in sea temperatures, external factors such as local and regional disturbances are found to influence coral reef environments which often lead to bleaching events. According to the Status of Coral Reefs of the World: 2020 report, from 2009 to 2018, there has been a progressive loss of live corals at the global level which may be attributed to the increasing anthropogenic activities (Souter et al., 2021). Due to coral’s sensitivity to environmental stressors, it is significantly considered as an indicator for global climate conditions. In this regard, this study developed a remote sensing change detection technique to segment coral bleaching from satellite images. Using a bi-temporal image stack composed of Sentinel-2 images showing pre and post bleaching, a machine learning classification model was developed to capture typologies of changes visible between the two images which included bleaching. Random Forest (RF) algorithm was employed to classify changes. This model obtained overall accuracies and kappa statistics of 0.97 and 0.94 respectively with minimum consumer and producer accuracy of 0.91. Moreover, the identified changes showed 78% agreement with the in-situ data composed of 31 monitoring stations distributed around Sekisei Lagoon, Okinawa, Japan. This study demonstrated a promising potential of machine learning for change detection for coral bleaching monitoring.
- 25 April 2024
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-4/W, 395-401
Open AccessSUPERVISED IMAGE CLASSIFICATION MODEL FOR CORAL BLEACHING DETECTION USING A BI-TEMPORAL SENTINEL-2 IMAGE STACK
Coral reefs are among the most vulnerable ecosystems to coastal and land-based anthropogenic factors. Aside from sudden increase in sea temperatures, external factors such as local and regional disturbances are found to influence coral reef environments which often lead to bleaching events. According to the Status of Coral Reefs of the World: 2020 report, from 2009 to 2018, there has been a progressive loss of live corals at the global level which may be attributed to the increasing anthropogenic activities (Souter et al., 2021). Due to coral’s sensitivity to environmental stressors, it is significantly considered as an indicator for global climate conditions. In this regard, this study developed a remote sensing change detection technique to segment coral bleaching from satellite images. Using a bi-temporal image stack composed of Sentinel-2 images showing pre and post bleaching, a machine learning classification model was developed to capture typologies of changes visible between the two images which included bleaching. Random Forest (RF) algorithm was employed to classify changes. This model obtained overall accuracies and kappa statistics of 0.97 and 0.94 respectively with minimum consumer and producer accuracy of 0.91. Moreover, the identified changes showed 78% agreement with the in-situ data composed of 31 monitoring stations distributed around Sekisei Lagoon, Okinawa, Japan. This study demonstrated a promising potential of machine learning for change detection for coral bleaching monitoring.
- Open Access
- 25 April 2024
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-4/W, 403-410
TYPHOON KARDING (NORU) STORM SURGE ANALYSIS USING THE COAWST MODELING SYSTEM
The Philippines, frequently affected by typhoons, faces the hazard of storm surges. This study examined the Coupled-Ocean-Atmosphere-Wave-Sediment Transport Modeling System (COAWST) to simulate Typhoon Karding's September 2022 storm surge. COAWST integrates the Regional Ocean Modeling System (ROMS), Simulating WAves Nearshore (SWAN), and Weather Research and Forecasting (WRF) coupled using the Model Coupling Toolkit (MCT). Four setups were analyzed: i. ROMS only, ii. ROMS-SWAN, iii. ROMS-WRF, and iv. ROMS-SWAN-WRF, focusing on four variables: a. Surface air pressure, b. Wind speed, c. Free-surface elevation, and d. Significant wave height. Results show that the ROMS-WRF and ROMS-SWAN-WRF setups accurately simulated Typhoon Karding's track with minimal positional error and wind speed. However, the models overestimated the typhoon's minimum air pressure with p-biases of 7.74% (i and ii), 4.1% (iii), and 3.9% (iv), and RMSE values of 68.529 hPa (i and ii), 36.744 hPa (iii), and 36.789 hPa (iv). Additionally, water levels were underestimated, with RMSE ranging from 0.31 to 0.35 meters and p-biases from −72.56% to −154.89% at Baler, Aurora validation point. At the Real, Quezon validation point, RMSE and p-bias ranged from 0.30 to 0.34 meters and −84.80% to −166.44%, respectively. Nonetheless, the models were able to simulate the storm surge and significant wave height at Baler and Real points similar to recorded data, with setup iv performing best in storm surge simulation. In summary, COAWST may be employed for typhoon simulations, with coupling being able to increase accuracy.
- 25 April 2024
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-4/W, 403-410
Open AccessTYPHOON KARDING (NORU) STORM SURGE ANALYSIS USING THE COAWST MODELING SYSTEM
The Philippines, frequently affected by typhoons, faces the hazard of storm surges. This study examined the Coupled-Ocean-Atmosphere-Wave-Sediment Transport Modeling System (COAWST) to simulate Typhoon Karding's September 2022 storm surge. COAWST integrates the Regional Ocean Modeling System (ROMS), Simulating WAves Nearshore (SWAN), and Weather Research and Forecasting (WRF) coupled using the Model Coupling Toolkit (MCT). Four setups were analyzed: i. ROMS only, ii. ROMS-SWAN, iii. ROMS-WRF, and iv. ROMS-SWAN-WRF, focusing on four variables: a. Surface air pressure, b. Wind speed, c. Free-surface elevation, and d. Significant wave height. Results show that the ROMS-WRF and ROMS-SWAN-WRF setups accurately simulated Typhoon Karding's track with minimal positional error and wind speed. However, the models overestimated the typhoon's minimum air pressure with p-biases of 7.74% (i and ii), 4.1% (iii), and 3.9% (iv), and RMSE values of 68.529 hPa (i and ii), 36.744 hPa (iii), and 36.789 hPa (iv). Additionally, water levels were underestimated, with RMSE ranging from 0.31 to 0.35 meters and p-biases from −72.56% to −154.89% at Baler, Aurora validation point. At the Real, Quezon validation point, RMSE and p-bias ranged from 0.30 to 0.34 meters and −84.80% to −166.44%, respectively. Nonetheless, the models were able to simulate the storm surge and significant wave height at Baler and Real points similar to recorded data, with setup iv performing best in storm surge simulation. In summary, COAWST may be employed for typhoon simulations, with coupling being able to increase accuracy.
- Open Access
- 25 April 2024
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-4/W, 387-393
INTEGRATION OF STUMPF'S RATIO MODEL AND RANDOM FOREST FOR SATELLITE-DERIVED BATHYMETRY ESTIMATION
The development of remote sensing for coastal and marine environment mapping has significantly enhanced our understanding of these ecosystems, enabling improved mitigation strategies against the impacts of human activities. However, remote sensing must consider the complex interplay of the atmosphere and water column. Ongoing research focuses on refining water column correction techniques, including Depth Invariant Indices (DII), Radiative Transfer models, and bathymetry models. This study specifically aims to enhance the Stumpf's Ratio model (SRM) for bathymetry by employing the Random Forest (RF) machine learning regression algorithm. The resulting bathymetry model, which incorporates visible bands from a Sentinel-2 MSI image, and their Stumpf's ratios, outperforms other methods, yielding the highest accuracy with RMSE and R2 values of 1.25 m and 0.854, respectively. This was followed by the multivariate SRM with RMSE and R2 values of 2.196 m and 0.554 respectively These findings demonstrate the promising potential of using RF machine learning regression with SRM for bathymetry modelling.
- 25 April 2024
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-4/W, 387-393
Open AccessINTEGRATION OF STUMPF'S RATIO MODEL AND RANDOM FOREST FOR SATELLITE-DERIVED BATHYMETRY ESTIMATION
The development of remote sensing for coastal and marine environment mapping has significantly enhanced our understanding of these ecosystems, enabling improved mitigation strategies against the impacts of human activities. However, remote sensing must consider the complex interplay of the atmosphere and water column. Ongoing research focuses on refining water column correction techniques, including Depth Invariant Indices (DII), Radiative Transfer models, and bathymetry models. This study specifically aims to enhance the Stumpf's Ratio model (SRM) for bathymetry by employing the Random Forest (RF) machine learning regression algorithm. The resulting bathymetry model, which incorporates visible bands from a Sentinel-2 MSI image, and their Stumpf's ratios, outperforms other methods, yielding the highest accuracy with RMSE and R2 values of 1.25 m and 0.854, respectively. This was followed by the multivariate SRM with RMSE and R2 values of 2.196 m and 0.554 respectively These findings demonstrate the promising potential of using RF machine learning regression with SRM for bathymetry modelling.
- Open Access
- 24 April 2024
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-4/W, 195-202
FISHPOND STATUS MAPPING USING RADAR REMOTE SENSING
The identification and monitoring of the status of all fishponds with Fishpond Lease Agreements (FLAs) in the Philippines is limited mainly to site visits. However, this approach is tedious, time-consuming, and costly due to the sheer number and locations of fishponds. This study explores the use of radar remote sensing in expediting the mapping of fishpond status (i.e., active, abandoned). Historical Sentinel-1A SAR images acquired from 2022–2023 covering identified fishpond areas were analysed. Several temporal statistics of their sigma nought backscatter values were calculated per polarization (i.e., VV and VH). Non-fishpond areas were masked out, and then Principal Component Analysis was applied to the stacked temporal statistics images. Afterwards, K-Means Cluster classification was applied to the first 7 components of the resulting PCA images to generate 4 classes. The resulting class with relatively low backscatter values is identified as water; “intermittent” water if their backscatter values vary greatly; and non-water or vegetated if their backscatter values are relatively high. Status was determined based mainly on the dominant class in each plot. Water class dominated plots are considered active; non-water or vegetated class dominated plots and plots that are covered mostly by “intermittent” water class are labelled as abandoned. Based on field-validated data, active fishponds, and old, abandoned fishponds (e.g., already have mangroves, or have no water control structures) were easier to correctly map, while abandoned fishpond with certain characteristics were harder to correctly identify. The approach is promising and can help BFAR map and monitor the fishponds in the country.
- 24 April 2024
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-4/W, 195-202
Open AccessFISHPOND STATUS MAPPING USING RADAR REMOTE SENSING
The identification and monitoring of the status of all fishponds with Fishpond Lease Agreements (FLAs) in the Philippines is limited mainly to site visits. However, this approach is tedious, time-consuming, and costly due to the sheer number and locations of fishponds. This study explores the use of radar remote sensing in expediting the mapping of fishpond status (i.e., active, abandoned). Historical Sentinel-1A SAR images acquired from 2022–2023 covering identified fishpond areas were analysed. Several temporal statistics of their sigma nought backscatter values were calculated per polarization (i.e., VV and VH). Non-fishpond areas were masked out, and then Principal Component Analysis was applied to the stacked temporal statistics images. Afterwards, K-Means Cluster classification was applied to the first 7 components of the resulting PCA images to generate 4 classes. The resulting class with relatively low backscatter values is identified as water; “intermittent” water if their backscatter values vary greatly; and non-water or vegetated if their backscatter values are relatively high. Status was determined based mainly on the dominant class in each plot. Water class dominated plots are considered active; non-water or vegetated class dominated plots and plots that are covered mostly by “intermittent” water class are labelled as abandoned. Based on field-validated data, active fishponds, and old, abandoned fishponds (e.g., already have mangroves, or have no water control structures) were easier to correctly map, while abandoned fishpond with certain characteristics were harder to correctly identify. The approach is promising and can help BFAR map and monitor the fishponds in the country.
- Open Access
- 24 April 2024
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-4/W, 69-75
3D RECONSTRUCTION OF THE FORT SANTIAGO DUNGEONS USING HANDHELD LASER SCANNING METHOD
The preservation of Cultural Heritage sites is an inherent responsibility of the citizens of a country. To this end, developments in digitization serve as a permanent way of preserving a site at its optimum state, and the creation of accurate 3D models becomes a repository of measurements for future reconstruction. Thus, in this study, the Fort Santiago Dungeons, a popular Cultural Heritage site in the Philippines, was 3D-reconstructed using the GeoSLAM ZEB Revo RT, a handheld Light Detection and Ranging (LiDAR) scanner that uses a Simultaneous Localization and Mapping (SLAM) Algorithm. With it, dense point clouds were produced with acceptable results in terms of colorization using the ZEB-CAM accessory, completeness, and measurement noise. This trend extended to quantitative evaluations of the dense point clouds of different formats (LAS and PLY) and colorization settings, as the Root Mean Square Errors (RMSE) against corresponding ground measurements were 0.734cm and 0.739cm for the Non-colorized, and 1.308cm and 1.312cm for Colorized, respectively. Likewise, the derived mesh files gave similar RMSEs with the Non-colorized at 1.044cm (LAS) and 0.999cm (PLY); and with the Colorized at 1.339cm (LAS) and 1.326cm (PLY). Overall, results showed that the mesh file derived from PLY dense point cloud exceeded the other format - as the dungeon's interior was better represented. Nonetheless, even though there were differences in the RMSEs of the measurements, due to factors such as the number of points and the processing itself, all are within the 5cm threshold to be considered useful in the event of reconstruction.
- 24 April 2024
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-4/W, 69-75
Open Access3D RECONSTRUCTION OF THE FORT SANTIAGO DUNGEONS USING HANDHELD LASER SCANNING METHOD
The preservation of Cultural Heritage sites is an inherent responsibility of the citizens of a country. To this end, developments in digitization serve as a permanent way of preserving a site at its optimum state, and the creation of accurate 3D models becomes a repository of measurements for future reconstruction. Thus, in this study, the Fort Santiago Dungeons, a popular Cultural Heritage site in the Philippines, was 3D-reconstructed using the GeoSLAM ZEB Revo RT, a handheld Light Detection and Ranging (LiDAR) scanner that uses a Simultaneous Localization and Mapping (SLAM) Algorithm. With it, dense point clouds were produced with acceptable results in terms of colorization using the ZEB-CAM accessory, completeness, and measurement noise. This trend extended to quantitative evaluations of the dense point clouds of different formats (LAS and PLY) and colorization settings, as the Root Mean Square Errors (RMSE) against corresponding ground measurements were 0.734cm and 0.739cm for the Non-colorized, and 1.308cm and 1.312cm for Colorized, respectively. Likewise, the derived mesh files gave similar RMSEs with the Non-colorized at 1.044cm (LAS) and 0.999cm (PLY); and with the Colorized at 1.339cm (LAS) and 1.326cm (PLY). Overall, results showed that the mesh file derived from PLY dense point cloud exceeded the other format - as the dungeon's interior was better represented. Nonetheless, even though there were differences in the RMSEs of the measurements, due to factors such as the number of points and the processing itself, all are within the 5cm threshold to be considered useful in the event of reconstruction.