Mehdi Montazeri-Pour
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Mehdi Montazeri-Pour has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Masoud Rajabi
Department of Materials Science and Engineering, Imam Khomeini International University, Qazvin, Iran
6 shared publications Masoud Rajabi
Department of Materials Science & Engineering, Faculty of Technology and Engineering, Imam Khomeini International University (IKIU), Qazvin, Iran
5 shared publications- Mohammad Habibi Parsa
School of Metallurgical and Materials Engineering, College of Engineering, University of Tehran, Tehran, Iran
5 shared publications A. Ataie
School of Metallurgy and Materials Engineering, University of Tehran, Tehran, Iran
4 shared publicationsFatemeh Bavarsiha
Biosphere Technology Company, Environmental Laboratory, Abhar, Iran + Department of Materials Science and Engineering, Faculty of Technology and Engineering, Imam Khomeini International University (IKIU), Qazvin, Iran
4 shared publicationsFardin Ghasemy-Piranloo
Biosphere Technology Company, Environmental Laboratory, Abhar, Iran
2 shared publications
Latest Publications
- 14 February 2026
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 355
Competing hot-press sintering mechanisms in nanoalumina-reinforced Al-alloy AA7075
- 14 February 2026
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 355
Competing hot-press sintering mechanisms in nanoalumina-reinforced Al-alloy AA7075
- 12 October 2025
- Published by Elsevier in Ceramics International
- Vol. 51 (28) , 59471-59493
Synthesis and characterization of iodixanol-coated Fe3O4 nanoparticles as a multifunctional nanoplatform for theranostic applications in magnetic hyperthermia and CT imaging
- 12 October 2025
- Published by Elsevier in Ceramics International
- Vol. 51 (28) , 59471-59493
Synthesis and characterization of iodixanol-coated Fe3O4 nanoparticles as a multifunctional nanoplatform for theranostic applications in magnetic hyperthermia and CT imaging
- 27 August 2024
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 34 (12) , 12121-12137
Preparation and Characterization of Al-ZrB2 Composites by Planetary Milling and Equal Channel Angular Pressing: Effect of ZrB2 Amount and Milling Time on Wear Behavior and Compressive Strength
- 27 August 2024
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 34 (12) , 12121-12137
Preparation and Characterization of Al-ZrB2 Composites by Planetary Milling and Equal Channel Angular Pressing: Effect of ZrB2 Amount and Milling Time on Wear Behavior and Compressive Strength
- 13 June 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (7) , 075955
Microstructure and properties of ZrB2-reinforced aluminum matrix composites consolidated by ECAP process
In this research work, the effects of mechanical alloying and subsequent compaction by ECAP on the microstructural, physical, and mechanical properties of Al-ZrB2 metal matrix composites (MMCs) were evaluated. To prepare composite powders, a mixture of Al and ZrB2 particles was mechanically alloyed at various times of 1, 6, 12, 18 and 24 h. SEM micrographs indicate that the size of the obtained particles decreases by increasing the time of mechanical alloying up to 18 h. However, after this time, increasing the time of mechanical alloying has led to an increase in the size of the particles. By means of mechanical alloying for 18 h, the average size of fine particles reached 823 nm, while coarse particles were 8 μm. The calculation via the use of XRD examination implies that the mean crystallite size of powder decreased from about 68 nm to 31 nm and 26.8 nm, for Al and Al-5%ZrB2 samples, respectively, while lattice strain increased from 0.25% to 0.64% and from 0.3% to 0.73% after 1 h to 24 h milling of same samples, respectively. However, the rate of crystallite size reduction after 12 h of mechanical alloying is gradually reduced, and that is reached its lowest level after 18 h. After that, increasing the time of mechanical alloying has led to a saturation in the lattice strain. In continue, the resulting composite powder was heated, consolidated and turned into bulk material by warm equal channel angular pressing (ECAP) at the temperature of 250 °C. The resultant optimum composite has been characterized by EDS elemental mapping. Microhardness measurements and shear punch tests were performed to evaluate the mechanical properties of the unreinforced and composite samples after the ECAP process. The Al-ZrB2 MMC bulk samples subjected to ECAP, with a ZrB2 amount of 5 wt%, had a relative density, hardness, and ultimate shear strength of 99.3%, 170 HV, and 151 MPa, respectively, using powders which have been mechanically alloyed up to 24 h.
- 13 June 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (7) , 075955
Microstructure and properties of ZrB2-reinforced aluminum matrix composites consolidated by ECAP process
In this research work, the effects of mechanical alloying and subsequent compaction by ECAP on the microstructural, physical, and mechanical properties of Al-ZrB2 metal matrix composites (MMCs) were evaluated. To prepare composite powders, a mixture of Al and ZrB2 particles was mechanically alloyed at various times of 1, 6, 12, 18 and 24 h. SEM micrographs indicate that the size of the obtained particles decreases by increasing the time of mechanical alloying up to 18 h. However, after this time, increasing the time of mechanical alloying has led to an increase in the size of the particles. By means of mechanical alloying for 18 h, the average size of fine particles reached 823 nm, while coarse particles were 8 μm. The calculation via the use of XRD examination implies that the mean crystallite size of powder decreased from about 68 nm to 31 nm and 26.8 nm, for Al and Al-5%ZrB2 samples, respectively, while lattice strain increased from 0.25% to 0.64% and from 0.3% to 0.73% after 1 h to 24 h milling of same samples, respectively. However, the rate of crystallite size reduction after 12 h of mechanical alloying is gradually reduced, and that is reached its lowest level after 18 h. After that, increasing the time of mechanical alloying has led to a saturation in the lattice strain. In continue, the resulting composite powder was heated, consolidated and turned into bulk material by warm equal channel angular pressing (ECAP) at the temperature of 250 °C. The resultant optimum composite has been characterized by EDS elemental mapping. Microhardness measurements and shear punch tests were performed to evaluate the mechanical properties of the unreinforced and composite samples after the ECAP process. The Al-ZrB2 MMC bulk samples subjected to ECAP, with a ZrB2 amount of 5 wt%, had a relative density, hardness, and ultimate shear strength of 99.3%, 170 HV, and 151 MPa, respectively, using powders which have been mechanically alloyed up to 24 h.
- Open Access
- 1 January 2022
- Published by National Library of Serbia in Processing and Application of Ceramics
- Vol. 16 (3) , 291-301
Synthesis, characterization and photocatalytic efficiency of Fe3O4/SiO2/TiO2, SrFe12O19/SiO2/TiO2 and Fe3O4/SiO2/ZnO core/shell/shell nanostructures
In this research, three magnetically separable photocatalysts, Fe3O4/SiO2/TiO2, SrFe12O19/SiO2/TiO2 and Fe3O4/SiO2/ZnO, with core/shell/shell structures were successfully prepared. In the first step, soft magnetic and hard magnetic Fe3O4 and SrFe12O19 powders were synthesized using carbon reduction and co-precipitation routes, respectively. In the second step, silica coating was performed by controlling the hydrolysis and con- densation of tetraethyl orthosilicate (TEOS) precursor on the magnetic cores. In the third step, a layer of TiO2 or ZnO photocatalytic shells was made on the as-prepared composites using titanium n-butoxide (TNBT) or zinc nitrate hexahydrate, respectively. The formation of the core/shell/shell structures was confirmed by FESEM and TEM analyses. The saturation magnetizations of the Fe3O4/SiO2/TiO2, SrFe12O19/SiO2/TiO2 and Fe3O4/SiO2/ZnO photocatalytic materials were 41.5, 33 and 49 emu/g, respectively. Photocatalytic activity was evaluated by degradation percentages of methylene blue (MB) under UV illumination, which were 88%, 83% and 62%, for the Fe3O4/SiO2/TiO2, SrFe12O19//TiO2 and Fe3O4/SiO2/ZnO composites, respectively. The first-, and second-order reaction kinetics were used to find out the suitable MB removal kinetics.
- 1 January 2022
- Published by National Library of Serbia in Processing and Application of Ceramics
- Vol. 16 (3) , 291-301
Open AccessSynthesis, characterization and photocatalytic efficiency of Fe3O4/SiO2/TiO2, SrFe12O19/SiO2/TiO2 and Fe3O4/SiO2/ZnO core/shell/shell nanostructures
In this research, three magnetically separable photocatalysts, Fe3O4/SiO2/TiO2, SrFe12O19/SiO2/TiO2 and Fe3O4/SiO2/ZnO, with core/shell/shell structures were successfully prepared. In the first step, soft magnetic and hard magnetic Fe3O4 and SrFe12O19 powders were synthesized using carbon reduction and co-precipitation routes, respectively. In the second step, silica coating was performed by controlling the hydrolysis and con- densation of tetraethyl orthosilicate (TEOS) precursor on the magnetic cores. In the third step, a layer of TiO2 or ZnO photocatalytic shells was made on the as-prepared composites using titanium n-butoxide (TNBT) or zinc nitrate hexahydrate, respectively. The formation of the core/shell/shell structures was confirmed by FESEM and TEM analyses. The saturation magnetizations of the Fe3O4/SiO2/TiO2, SrFe12O19/SiO2/TiO2 and Fe3O4/SiO2/ZnO photocatalytic materials were 41.5, 33 and 49 emu/g, respectively. Photocatalytic activity was evaluated by degradation percentages of methylene blue (MB) under UV illumination, which were 88%, 83% and 62%, for the Fe3O4/SiO2/TiO2, SrFe12O19//TiO2 and Fe3O4/SiO2/ZnO composites, respectively. The first-, and second-order reaction kinetics were used to find out the suitable MB removal kinetics.
- Open Access
- 6 April 2021
- Published by Springer Nature in Research Square
Synthesis, Characterization and Comparison of Photo-catalytic Efficiency of Fe3O4/SiO2/TiO2, SrFe12O19/SiO2/TiO2 and Fe3O4/SiO2/ZnO Core/shell/shell Nano-structures
In this research work, three magnetic composites of Fe3O4/SiO2/TiO2, SrFe12O19/SiO2/TiO2 and Fe3O4/SiO2/ZnO with core/shell/shell structures were successfully prepared by the sol-gel method. For this purpose, in the first step, soft magnetic and hard magnetic powders of Fe3O4 and SrFe12O19 were synthesized using carbon reduction and co-precipitation routes, respectively. In the second step, silica coating was performed by controlling the hydrolysis and condensation of the tetraethyl orthosilicate (TEOS) precursor on the magnetic cores. In the third step, a coating of TiO2 or ZnO photo-catalytic shells was made on as-prepared composites using precursors of titanium n-butoxide (TNBT) or zinc nitrate hexahydrate, respectively. The as-prepared magnetically separable photo-catalysts were characterized using XRD, FESEM, TEM and VSM. The results of the FESEM and TEM analyses confirmed the formation of the core/shell/shell structures. The saturation magnetization of the Fe3O4/SiO2/TiO2, SrFe12O19/SiO2/TiO2 and Fe3O4/SiO2/ZnO photo-catalytic materials was 41.5 emu/g, 33 emu/g and 49 emu/g, respectively. Evaluation of the photo-catalytic activity of Fe3O4/SiO2/TiO2, SrFe12O19/SiO2/TiO2 and Fe3O4/SiO2/ZnO composites by using methylene blue (MB) shows degradation percentages of 84%, 80% and 58%, respectively, under UV illumination.
- 6 April 2021
- Published by Springer Nature in Research Square
Open AccessSynthesis, Characterization and Comparison of Photo-catalytic Efficiency of Fe3O4/SiO2/TiO2, SrFe12O19/SiO2/TiO2 and Fe3O4/SiO2/ZnO Core/shell/shell Nano-structures
In this research work, three magnetic composites of Fe3O4/SiO2/TiO2, SrFe12O19/SiO2/TiO2 and Fe3O4/SiO2/ZnO with core/shell/shell structures were successfully prepared by the sol-gel method. For this purpose, in the first step, soft magnetic and hard magnetic powders of Fe3O4 and SrFe12O19 were synthesized using carbon reduction and co-precipitation routes, respectively. In the second step, silica coating was performed by controlling the hydrolysis and condensation of the tetraethyl orthosilicate (TEOS) precursor on the magnetic cores. In the third step, a coating of TiO2 or ZnO photo-catalytic shells was made on as-prepared composites using precursors of titanium n-butoxide (TNBT) or zinc nitrate hexahydrate, respectively. The as-prepared magnetically separable photo-catalysts were characterized using XRD, FESEM, TEM and VSM. The results of the FESEM and TEM analyses confirmed the formation of the core/shell/shell structures. The saturation magnetization of the Fe3O4/SiO2/TiO2, SrFe12O19/SiO2/TiO2 and Fe3O4/SiO2/ZnO photo-catalytic materials was 41.5 emu/g, 33 emu/g and 49 emu/g, respectively. Evaluation of the photo-catalytic activity of Fe3O4/SiO2/TiO2, SrFe12O19/SiO2/TiO2 and Fe3O4/SiO2/ZnO composites by using methylene blue (MB) shows degradation percentages of 84%, 80% and 58%, respectively, under UV illumination.
- 9 April 2020
- Published by Taylor & Francis in Australian Journal of Structural Engineering
- Vol. 21 (3) , 193-207
Analysis of steel special moment frames including damaged column subjected to far and near-field ground motions
In the present research, the performance of steel special moment frames having one damaged column designed based on seismic provisions has been evaluated during the progressive collapse under the ground motions. For this purpose, five- and ten-story two-dimensional steel frames with four bays have been modelled by utilising OpenSees software with and without considering a weak column. Moreover, nonlinear incremental dynamic analyses (IDA) have been carried out on the structures under far and near-field ground motions. In the case of the model with a weak column, the potential of progressive collapse has been assessed using the Alternative Load Path Method recommended in the General Service Administration (GSA) guideline. In this state, due to the defect in the implementation of column splice, the damaged column represents a situation in which it is weak in terms of bending performance and collapsed by the earthquake. Furthermore, the effect of floor number, weakness of column, and the type of applied earthquake have been discussed. According to the obtained results, a structure including one damaged column has a weaker performance in the near-field compared with in the far-field ground motions before a progressive collapse.
- 9 April 2020
- Published by Taylor & Francis in Australian Journal of Structural Engineering
- Vol. 21 (3) , 193-207
Analysis of steel special moment frames including damaged column subjected to far and near-field ground motions
In the present research, the performance of steel special moment frames having one damaged column designed based on seismic provisions has been evaluated during the progressive collapse under the ground motions. For this purpose, five- and ten-story two-dimensional steel frames with four bays have been modelled by utilising OpenSees software with and without considering a weak column. Moreover, nonlinear incremental dynamic analyses (IDA) have been carried out on the structures under far and near-field ground motions. In the case of the model with a weak column, the potential of progressive collapse has been assessed using the Alternative Load Path Method recommended in the General Service Administration (GSA) guideline. In this state, due to the defect in the implementation of column splice, the damaged column represents a situation in which it is weak in terms of bending performance and collapsed by the earthquake. Furthermore, the effect of floor number, weakness of column, and the type of applied earthquake have been discussed. According to the obtained results, a structure including one damaged column has a weaker performance in the near-field compared with in the far-field ground motions before a progressive collapse.
- 2 January 2020
- Published by Springer Nature in Journal of Inorganic and Organometallic Polymers and Materials
- Vol. 30 (7) , 2386-2396
Effect of Non-aqueous Media on Nano-crystalline SrFe12O19 Particles Produced by Co-precipitation with Metal Chlorides and Evaluation of Their Magnetic and Photocatalytic Properties
- 2 January 2020
- Published by Springer Nature in Journal of Inorganic and Organometallic Polymers and Materials
- Vol. 30 (7) , 2386-2396
Effect of Non-aqueous Media on Nano-crystalline SrFe12O19 Particles Produced by Co-precipitation with Metal Chlorides and Evaluation of Their Magnetic and Photocatalytic Properties