Vladimir V. Korovushkin
Vladimir V. Korovushkin has a total of 71 co-authors. Here are the top co-authors by number of shared publications:
- Vladimir G. Kostishyn
National University of Science and Technology “MISiS”, Moscow, Russia
4 shared publications G. S. Podgorodetskii
Moscow Institute of Steel and Alloys
3 shared publicationsM. N. Shipko
3 shared publicationsA. N. Nikolaev
Kuznetsk Institute of Information and Management Technologies
2 shared publications- A. S. Komlev
Moscow Institute of Steel and Alloys (National University of Science and Technology)
2 shared publications A. Yu. Adamtsov
Moscow Institute of Steel and Alloys (National University of Science and Technology)
2 shared publications
Latest Publications
- 25 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Magnetics Letters
- Vol. 10 (1949307X) , 1-5
Tuning the Magnetic Order in Sc-Substituted Barium Hexaferrites
Polycrystalline ${\rm{BaFe_{12-x}Sc_{x}O_{19}}}$ hexaferrites (x=0.1, 0.6, and 1.2) were produced using a ceramic technology. The prepared samples were examined by using neutron powder diffraction (NPD). According to neutron powder diffraction (NPD) data, the studied samples possess a hexagonal structure with space group (SG: P63/mmc). The magnetic properties were analyzed with vibrating sample magnetometer (VSM) as well as M'ssbauer spectroscopy. The combined investigations show that tuning the magnetic parameters with Sc-substitution is associated with several factors: i) ordering the ${\rm{Sc^{3+}}}$ ions in positions 2b and 4f2 and the cation vacancies at the boundary of the spinel and hexagonal blocks; ii) transfer of spin density from iron ions localized at position 12k to 3d orbitals of ${\rm{Sc^{3+}}}$ ions; iii) weakening the indirect exchange interactions between 2b, 4f2, and 12k sublattices; iv) presence of a non-collinear magnetic order for the Sc-concentration x above 0.6.- 25 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Magnetics Letters
- Vol. 10 (1949307X) , 1-5
Tuning the Magnetic Order in Sc-Substituted Barium Hexaferrites
Polycrystalline ${\rm{BaFe_{12-x}Sc_{x}O_{19}}}$ hexaferrites (x=0.1, 0.6, and 1.2) were produced using a ceramic technology. The prepared samples were examined by using neutron powder diffraction (NPD). According to neutron powder diffraction (NPD) data, the studied samples possess a hexagonal structure with space group (SG: P63/mmc). The magnetic properties were analyzed with vibrating sample magnetometer (VSM) as well as M'ssbauer spectroscopy. The combined investigations show that tuning the magnetic parameters with Sc-substitution is associated with several factors: i) ordering the ${\rm{Sc^{3+}}}$ ions in positions 2b and 4f2 and the cation vacancies at the boundary of the spinel and hexagonal blocks; ii) transfer of spin density from iron ions localized at position 12k to 3d orbitals of ${\rm{Sc^{3+}}}$ ions; iii) weakening the indirect exchange interactions between 2b, 4f2, and 12k sublattices; iv) presence of a non-collinear magnetic order for the Sc-concentration x above 0.6.- Open Access
- 20 February 2017
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 1 (5 (85)) , 10-15
Study of the features of the magnetic and crystal structures of the BaFe12-Х ALXO19 AND BaFe12-Х GaXO19 substituted hexagonal ferrites
Study of the features of the magnetic and crystal structures of the BaFe12-Х ALXO19 AND BaFe12-Х GaXO19 substituted hexagonal ferrites
- 20 February 2017
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 1 (5 (85)) , 10-15
Open AccessStudy of the features of the magnetic and crystal structures of the BaFe12-Х ALXO19 AND BaFe12-Х GaXO19 substituted hexagonal ferrites
Study of the features of the magnetic and crystal structures of the BaFe12-Х ALXO19 AND BaFe12-Х GaXO19 substituted hexagonal ferrites
- 1 August 2016
- Published by Allerton Press in Bulletin of the Russian Academy of Sciences: Physics
- Vol. 80 (8) , 1021-1026
Effect of megaplastic deformation on the magnetic properties of FeNi alloy
- 1 August 2016
- Published by Allerton Press in Bulletin of the Russian Academy of Sciences: Physics
- Vol. 80 (8) , 1021-1026
Effect of megaplastic deformation on the magnetic properties of FeNi alloy
- Open Access
- 1 January 2016
- Published by Sumy State University in Journal of Nano- and Electronic Physics
- Vol. 8 (3) , 3004
Magnetic Properties and Local Parameters of Crystal Structure for BaFe12O19 and SrFe12O19 Hexagonal Ferrites
- 1 January 2016
- Published by Sumy State University in Journal of Nano- and Electronic Physics
- Vol. 8 (3) , 3004
Open AccessMagnetic Properties and Local Parameters of Crystal Structure for BaFe12O19 and SrFe12O19 Hexagonal Ferrites
- 1 December 2015
- Published by Pleiades Publishing Ltd in Russian Metallurgy (Metally)
- Vol. 2015 (13) , 1103-1109
Effect of magnetic-pulse treatment on the surface defects, the properties, and the structure of sendust alloy
- 1 December 2015
- Published by Pleiades Publishing Ltd in Russian Metallurgy (Metally)
- Vol. 2015 (13) , 1103-1109
Effect of magnetic-pulse treatment on the surface defects, the properties, and the structure of sendust alloy
- 30 November 2015
- Published by Ore and Metals Publishing House in Gornyi Zhurnal
- p. 70-74
Mineral and valent forms of iron and their effects on coals oxidation and self-ignition
The paper is dedicated to issues concerning effects of mineral iron compounds at processes of coal oxidization and self-ignition. The given in literature data indicates an important role of pyrite and iron carbonate within the mineral matter of coal in processes leading to coals selfignition. We provide a review of methods for quantitative estimation of iron carbonates and sulfides. It was demonstrated that for the quantitative estimation of mineral and valence forms of iron it is preferably to use Mössbauer spectroscopy method. In the paper we studied mineral and valence forms of iron in coals of various minefields, and also the features of their mineral matter composition. The representative samples of coals were collected at manufacturing plants and kept under the conditions of maximal excluding of oxidization. According to the growth of the degree of carbon contents, the coals collection included three main types: brown, bituminous coals and anthracite, and also bituminous oxidized coals. In order to study mineral and valence forms of iron we used methods of inductively coupled plasma emission spectral analysis and Mössbauer spectroscopy. Studies of mineral and valence forms of iron for coals of different minefields allowed finding sulfides as pyrite as well as carbonates as siderite. Contents of pyrite and siderite within the considered coals do not exceed 1%. The only exception was anthracite of Donetzk coal field with pyrite contents of 3.2%. Comparison of oxidized bituminous coals and not oxidized coals revealed that oxidization leads to substantial increase of hydromica contents and appearance of finely dispersed iron oxide. Study of mineral and valence forms of iron allowes to establish potential hazard of heat formation caused by siderite and pyrite oxidization at contents of the latter larger than in studied coal samples. In order to reveal the effect degree of sulfides and carbonates on coals self-heating, it is necessary to investigate alteration of composition of mineral and valence forms of iron at various oxidizing conditions. Control of such processes may be performed by emission spectral analysis and Mössbauer spectroscopy.The study was supported in the framework of the Federal Targeted Prorgam on R&D in Priority Areas of Scientific and Technological Complex Develpment of Russia for 2014-2020, Agreement No. 14.575.21.0062, Unique Agreement Identifier RFMEF157514X0062.
- 30 November 2015
- Published by Ore and Metals Publishing House in Gornyi Zhurnal
- p. 70-74
Mineral and valent forms of iron and their effects on coals oxidation and self-ignition
The paper is dedicated to issues concerning effects of mineral iron compounds at processes of coal oxidization and self-ignition. The given in literature data indicates an important role of pyrite and iron carbonate within the mineral matter of coal in processes leading to coals selfignition. We provide a review of methods for quantitative estimation of iron carbonates and sulfides. It was demonstrated that for the quantitative estimation of mineral and valence forms of iron it is preferably to use Mössbauer spectroscopy method. In the paper we studied mineral and valence forms of iron in coals of various minefields, and also the features of their mineral matter composition. The representative samples of coals were collected at manufacturing plants and kept under the conditions of maximal excluding of oxidization. According to the growth of the degree of carbon contents, the coals collection included three main types: brown, bituminous coals and anthracite, and also bituminous oxidized coals. In order to study mineral and valence forms of iron we used methods of inductively coupled plasma emission spectral analysis and Mössbauer spectroscopy. Studies of mineral and valence forms of iron for coals of different minefields allowed finding sulfides as pyrite as well as carbonates as siderite. Contents of pyrite and siderite within the considered coals do not exceed 1%. The only exception was anthracite of Donetzk coal field with pyrite contents of 3.2%. Comparison of oxidized bituminous coals and not oxidized coals revealed that oxidization leads to substantial increase of hydromica contents and appearance of finely dispersed iron oxide. Study of mineral and valence forms of iron allowes to establish potential hazard of heat formation caused by siderite and pyrite oxidization at contents of the latter larger than in studied coal samples. In order to reveal the effect degree of sulfides and carbonates on coals self-heating, it is necessary to investigate alteration of composition of mineral and valence forms of iron at various oxidizing conditions. Control of such processes may be performed by emission spectral analysis and Mössbauer spectroscopy.The study was supported in the framework of the Federal Targeted Prorgam on R&D in Priority Areas of Scientific and Technological Complex Develpment of Russia for 2014-2020, Agreement No. 14.575.21.0062, Unique Agreement Identifier RFMEF157514X0062.
- 1 August 2015
- Published by Pleiades Publishing Ltd in Inorganic Materials
- Vol. 51 (9) , 908-912
Magnetic microstructure of Fe3–x Al x O4 superparamagnetic magnetites
We have studied superparamagnetic magnetites with various isomorphous aluminum contents, identified the cation distribution in their structure, and demonstrated nonlinear variations in their unit cell parameter and density and also a nonlinear variation in their magnetization, with a maximum at an aluminum content of 3.6% (x = 0.3). The conclusion has been made that the properties of the superparamagnetic magnetites with isomorphous aluminum can be used in optimizing the composition of nanocomposite materials with tailored magnetic properties.
- 1 August 2015
- Published by Pleiades Publishing Ltd in Inorganic Materials
- Vol. 51 (9) , 908-912
Magnetic microstructure of Fe3–x Al x O4 superparamagnetic magnetites
We have studied superparamagnetic magnetites with various isomorphous aluminum contents, identified the cation distribution in their structure, and demonstrated nonlinear variations in their unit cell parameter and density and also a nonlinear variation in their magnetization, with a maximum at an aluminum content of 3.6% (x = 0.3). The conclusion has been made that the properties of the superparamagnetic magnetites with isomorphous aluminum can be used in optimizing the composition of nanocomposite materials with tailored magnetic properties.
- 1 May 2015
- Published by Allerton Press in Steel in Translation
- Vol. 45 (5) , 331-337
Mineral composition and crystalline structure of iron-bearing components in metallurgical waste
The waste stored in tailings and sludge pools at metallurgical enterprises—including wastes from raw-materials processing (extraction, enrichment, sintering, etc.), metallurgical processing, and ancillary processes—may be used for production purposes; in particular, it may prove valuable in ferrous metallurgy. With declining reserves of iron ore, the processing of industrial waste as a source of iron is of particular interest. For more than fifty years, production wastes—rock from coal enrichment, ash from coal combustion in the thermoelectric plant, gas-purification sludge, etc.—have been accumulating in the sludge pools at West Siberian Metallurgical Works (now OAO EVRAZ ZSMK). Since the sludge pools are now at the end of their working life, it is necessary to develop a technology for processing that waste. To assess the prospects for producing iron concentrates from the basic wastes in the sludge pool, the mineral composition and crystal-chemical structure of the iron-bearing minerals are investigated by means of Mossbauer spectroscopy, X-ray phase analysis, chemical analysis, and optical microscopy. Significant differences are observed in the types of iron in waste from different processes. That must be taken into account in developing the appropriate processing technology.
- 1 May 2015
- Published by Allerton Press in Steel in Translation
- Vol. 45 (5) , 331-337
Mineral composition and crystalline structure of iron-bearing components in metallurgical waste
The waste stored in tailings and sludge pools at metallurgical enterprises—including wastes from raw-materials processing (extraction, enrichment, sintering, etc.), metallurgical processing, and ancillary processes—may be used for production purposes; in particular, it may prove valuable in ferrous metallurgy. With declining reserves of iron ore, the processing of industrial waste as a source of iron is of particular interest. For more than fifty years, production wastes—rock from coal enrichment, ash from coal combustion in the thermoelectric plant, gas-purification sludge, etc.—have been accumulating in the sludge pools at West Siberian Metallurgical Works (now OAO EVRAZ ZSMK). Since the sludge pools are now at the end of their working life, it is necessary to develop a technology for processing that waste. To assess the prospects for producing iron concentrates from the basic wastes in the sludge pool, the mineral composition and crystal-chemical structure of the iron-bearing minerals are investigated by means of Mossbauer spectroscopy, X-ray phase analysis, chemical analysis, and optical microscopy. Significant differences are observed in the types of iron in waste from different processes. That must be taken into account in developing the appropriate processing technology.
- 1 November 2014
- Published by Pleiades Publishing Ltd in Journal of Surface Investigation: X-Ray, Synchrotron and Neutron Techniques
- Vol. 8 (6) , 1235-1239
Atomic-force microscopy of Fe3(SiAl) alloys under magnetic-pulse treatment
The influence of weak (10–100 kA/m) low-frequency (10–20 Hz) pulsed magnetic fields on the surface structure and physical and mechanical parameters of Fe3(SiAl) alloys is studied by atomic-force microscopy and porometry.
- 1 November 2014
- Published by Pleiades Publishing Ltd in Journal of Surface Investigation: X-Ray, Synchrotron and Neutron Techniques
- Vol. 8 (6) , 1235-1239
Atomic-force microscopy of Fe3(SiAl) alloys under magnetic-pulse treatment
The influence of weak (10–100 kA/m) low-frequency (10–20 Hz) pulsed magnetic fields on the surface structure and physical and mechanical parameters of Fe3(SiAl) alloys is studied by atomic-force microscopy and porometry.
- 22 October 2014
- Published by Pleiades Publishing Ltd in Inorganic Materials
- Vol. 50 (12) , 1252-1256
Magnetic structure and properties of Mn-Zn ferrites prepared by radiation-enhanced thermal sintering
2500NMS2 Mn-Zn ferrites have been produced by radiation-enhanced thermal sintering. We have studied the effect of basic ferrite composition and doping on the electromagnetic properties of ferrite products after radiation-enhanced thermal sintering. The results demonstrate that doping with bismuth oxide as a low-melting-point material allows one to activate sintering processes, thereby improving the performance of the material. Mössbauer spectroscopy and X-ray diffraction have been used to investigate general aspects of phase transformations during the radiation-enhanced thermal sintering of green compacts. The addition of surfactants is shown to be effective in raising the density of green compacts and improving the performance of the ferrites.
- 22 October 2014
- Published by Pleiades Publishing Ltd in Inorganic Materials
- Vol. 50 (12) , 1252-1256
Magnetic structure and properties of Mn-Zn ferrites prepared by radiation-enhanced thermal sintering
2500NMS2 Mn-Zn ferrites have been produced by radiation-enhanced thermal sintering. We have studied the effect of basic ferrite composition and doping on the electromagnetic properties of ferrite products after radiation-enhanced thermal sintering. The results demonstrate that doping with bismuth oxide as a low-melting-point material allows one to activate sintering processes, thereby improving the performance of the material. Mössbauer spectroscopy and X-ray diffraction have been used to investigate general aspects of phase transformations during the radiation-enhanced thermal sintering of green compacts. The addition of surfactants is shown to be effective in raising the density of green compacts and improving the performance of the ferrites.