GYGuangqing Yang

Guangqing Yang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Guangqing Yang has a total of 41 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Mechanical Performance of Carbon-Fiber Geogrid-Reinforced Asphalt Pavement Systems Under High-, Low-Temperature, and Shear Loadings

    by Jian Liu, Qi Wang, Zhiqiang Wang, Guangqing Yang

    The application of carbon-fiber-based geogrids in asphalt pavements is still in the nascent phase of research in China. Compared with glass fiber, carbon fiber undergoes processes such as electrochemical surface oxidation and coating with a sizing agent (polyurethane-based) to enhance its bond strength with bitumen or concrete, and to improve its wear resistance and suitability for construction. Utilizing a suite of laboratory tests including rutting tests, low-temperature flexural failure tests, and Leutner shear tests, this study researches the impacts of surface combined body type and geogrid type on the high- and low-temperature performance characteristics and interlayer shear performance of asphalt pavement structures. The results demonstrate that carbon-fiber-based geogrid reinforcement improves the rutting and low-temperature cracking resistance of asphalt surface combined bodies, with the carbon fiber geogrid (CCF) variant exhibiting superior performance to the carbon/glass fiber composite geogrid (GCF) in both aspects. Relative to GCF reinforcement, CCF reinforcement achieves increases of 12.80–13.74%, 4.53%, and 37.47% in dynamic stability, flexural tensile strength, and flexural tensile strength enhancement rate, respectively, indicating that the polymer coating process enhances the reinforcement effect of carbon-fiber-based geogrids. Carbon-fiber-based geogrid reinforcement compromises the interlayer shear performance of asphalt pavement composites; nevertheless, CCF reinforcement delivers 13.94–28.14% better interlayer shear performance than GCF reinforcement. This indicates that the polymer coating process enhances the shear resistance at the interface of carbon-fiber-based geogrids. Surface combined body type is a key factor governing the high- and low-temperature performance and interlayer shear behavior of reinforced surface combined bodies. The dynamic stability, maximum flexural-tensile strain, and interlayer shear strength of the AC-20/AC-25 are all superior to those of the AC-13/AC-20, with respective increases of 40.25%, 27.58%, and 8.5–25.6%. The test results may provide meaningful insights into the performance behavior of geogrid-reinforced asphalt pavements.


  • Stability Analysis of MSE Walls with Stepped Reinforcement Design

    by Peng Xu, Yuhan Meng, Yi Zhong, Kianoosh Hatami, Ting Li, Guangqing Yang, Xunmei Liang


  • Open Access

    Research on the interface characteristics of coal gangue with different geosynthetic reinforcements

    by Xudong Zhao, Pengfei Gao, Weichao Liu, Yan Yang, Lingxiao Meng, Guangqing Yang, Yingdong Xu

    Coal gangue occupies substantial land resources. Using coal gangue as reinforcement fill material is an effective utilization method. The characteristics of the soil-reinforcement interface influence the safety and stability. Large-scale direct shear tests were conducted to study the interface characteristics of coal gangue with polypropylene woven geotextile, welded steel-plastic geogrid, and high-density polyethylene uniaxial geogrid. The tests revealed that the shear stress-shear displacement relationship is nonlinear and positively correlated with normal stress, with the breakage of burnt coal gangue particles observed during the process. The maximum shear stress and shear strength index of the interface for the three geosynthetics reinforced coal gangue are in the order of uniaxial high-density polyethylene (HDPE) geogrid showing the highest reinforcement strength, followed by the welded steel-plastic geogrid, with the polypropylene woven geotextile having the lowest strength. After HDPE geogrid reinforcement, interface friction angle slightly changes, but cohesion significantly increases, with an increase of 1156.9%. Considering the interface interactions, among the three geosynthetic materials, HDPE geogrid exhibits the most effective reinforcement effect on coal gangue, followed by the welded steel-plastic geogrid. The geotextile shows the least effectiveness in reinforcing burnt coal gangue. For reinforced coal gangue projects, HDPE geogrid is recommended as the reinforcing material.


  • Open Access

    Study on High and Low Temperature Performance of Mineral Powder Modified Rubber Asphalt Mortar

    by Weichao Liu, Ce Zhang, Lingyun Li, Lianfang Wang, Lipeng Wang, Changyu Pu, Guangqing Yang

    With the increase of coal mining in China, a large amount of waste coal gangue is produced. How to reuse waste coal gangue is an important research direction. The research results showed that the improvement of base asphalt mortar by coal gangue powder could improve the performance of matrix asphalt, however, search of rubber asphalt mortar modified by coal gangue powder is rarely reported. High and low-temperature performance is the critical performance of asphalt mortar. So the limestone powder modified base asphalt mortar (LPMBAM), limestone powder modified rubber asphalt mortar (LPMRAM), and coal gangue powder modified rubber asphalt mortar (CGPMRAM) are prepared, the high and low-temperature performance of asphalt mortar are analyzed by cone penetration tests and bending beam rheological tests (BBR). The results show that the cone penetration of asphalt mortar decreases with the increase of the filler-asphalt ratio and the decrease of the temperature. The shear strength and the stiffness modulus increase with the rise in the filler-asphalt ratio and the decrease in temperature. At the same filler-asphalt ratio and temperature, the order of cone penetration is CGPMRAM < LPMRAM < LPMBAM, and the order of shear strength is CGPMRAM > LPMRAM > LPMBAM, so the high-temperature performance of CGPMRAM is better than that of LPMRAM, much better than LPMBAM, the order of stiffness modulus is LPMRAM < CGPMRAM < LPMBAM so the low-temperature performance of LPMRAM and CGPMRAM is better than that of LPMBAM. By the double linear model, the optimum filler-asphalt ratio is determined to be 0.44~0.46 for LPMRAM and 0.42~0.43 for CGPMRAM. Microscopic tests show that the surface of coal gangue powder is rougher than that of limestone powder. The content of active oxides such as SiO2 and Al2O3 in coal gangue is about 7.8 times that of limestone powder. These physical and chemical properties make coal gangue powder able to adsorb rubber asphalt better and improve the high-temperature performance of CGPMRAM while slightly worsening the low-temperature performance of CGPMRAM but still better than LPMBAM.


  • Open Access

    Study on Improvement Characteristics of a Novel Geotextile with Stitched Transverse Ribs

    by Weichao Liu, He Li, Yan Yang, Peng Xu, Zhengjie Dai, Guangqing Yang, He Wang, Zhijie Wang

    Geotextile is one of the reinforcement materials adopted in many engineering structures. Conventional geotextiles have a limited reinforcement effect due to the insufficient friction strength between geotextiles and soils. This paper proposes a novel type of geotextile with stitched transverse ribs to improve the reinforcement effect. A series of large-scale direct shear tests have been conducted, and the improvement characteristics between conventional geotextiles, geogrids, and the novel geotextiles have been studied. The results show that the novel stitched transverse rib geotextiles can significantly increase the shear strength compared to conventional geotextiles and geogrids. Moreover, due to the restraint and friction effect of ribs on the soils, the reinforcement effect of the novel geotextile is increased with increasing ribs. Insights from this study can provide a new understanding of the novel stitched transverse ribs geotextile’s reinforcement mechanism in engineering.


  • Open Access

    Research on the Load Transfer Law of Cross-Sections of Pile-Supported Reinforced Embankments Based on the Finite Element Method

    by Xin Wang, Xizhao Wang, Guangqing Yang, Xiang Yang, Da Zhang

    Combining field test research with finite element numerical analysis, this paper studies the mechanical behavior of pile-supported reinforced embankments in soft soil areas. We analyze and compare the variation law of load transfer efficacy at the subgrade center, the right side of the centerline, and the road shoulder; the variations of the load sharing ratios of the soil arching effect and the load sharing ratios of the membrane effect; and the load variation law of wide subgrade cross-sections. Then, the model calculation results are compared with the calculation results of the five theoretical methods and the applicability of the various methods is evaluated. The results show that: increasing the pile length, pile cap width, and embankment height and reducing the pile spacing will increase the pile load transfer efficacy; pile cap width has the greatest influence on the load transfer efficacy; regarding the variation law of the load sharing ratios of subgrade cross-sections, the load-sharing ratio of the soil arch effect at the shoulder is smaller than that at the center of the subgrade, indicating that the deformation of the geogrid at the shoulder is large and the membrane effect is significant; and, regarding the load variation law of subgrade cross-sections, from the subgrade center to the shoulder direction, the pile load transfer efficacy decreases gradually and the load transfer efficacy at the shoulder decreases significantly.


  • Open Access

    Field Test on Deformation Characteristics of Pile-Supported Reinforced Embankment in Soft Soil Foundation

    by Xin Wang, Xizhao Wang, Guangqing Yang, Changyu Pu, Jinzhao Jin

    In this work, the settlement deformation of the soft-soil subgrade and the deformation law of the geogrid were studied based on field tests carried out on the pile-supported reinforced embankment of the Rongwu Expressway in the Xiong’an New Area. The settlement and deformation law of the reinforcement area and the underlying layer of the pile-supported reinforced embankment, the settlement law of the transverse and longitudinal sections of the subgrade, and the deformation law of the bidirectional geogrid were analyzed. The results show that reducing the pile spacing and embankment height can effectively reduce the foundation settlement. The change in the pile spacing mainly affected the settlement in the reinforcement area, while the embankment height mainly affected the substratum settlement; the differential settlement in the subgrade cross-section was mainly caused by the settlement in the reinforcement area. The settlement at the center of the subgrade was obviously higher than that at the shoulder. In terms of the geogrid deformation law of the subgrade cross-section, the geogrid deformation at the center line of the subgrade was the largest. With the increase in the distance from the center line, the geogrid deformation gradually decreased. In terms of the deformation law of the biaxial geogrid, the tensile deformation of the geogrid in the center of two piles was greater than that in the center of four piles. The transverse tensile deformation of the geogrid was greater than the longitudinal tensile deformation. The tensile stress of the reinforced materials was calculated according to four specifications, and the applicability of various methods was evaluated.


  • Analyzing Reinforcement Loads of Vertical Geosynthetic-Reinforced Soil Walls Considering Toe Restraint

    by Huabei Liu, Guangqing Yang, Ching Hung

    Supported by available experimental and numerical findings on the behavior of geosynthetic-reinforced soil (GRS) retaining walls under working stress conditions, an analytical method was proposed to quantify the toe restraint of vertical GRS retaining walls. The lateral earth pressure on the facing is calculated by Coulomb’s theory of active earth pressure, and a polygonal distribution is used to quantify the horizontal connection loads of the reinforcement layers. The toe restraint is quantified through force and moment equilibriums of the facing column. The analytical toe restraint was then incorporated into an analytical method for reinforcement loads of vertical reinforced soil masses. The proposed approach was validated against the results from full-scale and large-scale tests. The approach can be used to compute the reinforcement loads of GRS retaining walls under working stress conditions and with active earth pressure on the facing so that the serviceability of GRS retaining walls can be b...