MSMichal Szota

Michal Szota

*This is an algorithmically generated author record based on publicly available information.

Michal Szota has a total of 155 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Safety engineering of anthropogenic facilities in applied sciences

    by Jerzy Obolewicz, Adam Baryłka, Michał SZOTA

    "Security" is an interdisciplinary concept and appears in various areas of life, science and knowledge describing the reality in which modern man lives, and its aspects are studied by many different scientific disciplines using engineering achievements. In simple terms, safety should be treated as the absence of threat throughout the entire life cycle of an anthropogenic object. Help in eliminating or reducing threats can be provided by applied sciences, which are focused on transferring knowledge about the surrounding world, diagnosing and understanding phenomena, problems and social processes, and the combination of achievements in safety engineering and applied sciences can give satisfactory results. The article proposes a model that takes into account safety engineering issues in the life cycle of an anthropogenic object using the achievements of applied sciences.

  • Material and construction solutions in the construction of civil defence shelters

    by A. Baryłka, M. Szota

    An analysis is presented of the use of material and construction solutions used in construction, mainly residential, for the construction of OC (civil defence) shelters.The article presents procedures for designing reinforced concrete structures that make it possible to properly determine the load capacity of critical sections. In the present work, a study of the deformation stability of a zone of reinforced concrete sections that is subjected to compression is used. Computational methods based on Drucker's postulate were used to solve the problem. The proposed approach enables the determination of the values of ultimate and failure strains based on the analysis of the loading path of a reinforced concrete section.Generally, shelters built into residential buildings are analysed, intended to be constructed in the rooms of the basement floor. A reduced need for ancillary space, the basement room, is observed. Garage functions are located on the basement floor. The plan contours of the basement are often larger than those of the ground floor. It is possible to design a shelter for the residents of the building, which ensures the greatest efficiency in its use. It is desirable to maintain uniform material and construction solutions while maintaining technological and organisational solutions during the erection of the entire building.The paper indicates the possibility of using some of the material and structural solutions of the housing construction in the realisation of OC shelters built into the basement floor. The construction of free-standing shelters was not analysed separately, but the proposals presented in the paper can also be applied to the type of OC shelters. Some results of the analysis of the adaptation of material and structural solutions of the housing construction to the needs of OC shelters construction will be presented during the symposium.It is advisable to develop models for the construction of OC shelters using contemporary technologies used in the construction industry.Useful tool can be the proposed scheme for improving activities based on the EFQM model.


  • The role of technology in industry according to the BOST method

    by S. Borkowski, M. Szota, A. Baryłka, T. Bajor, J. Przybytniowski


  • Shaping the climate of construction work safety

    by J. Obolewicz, A. Baryłka, M. Szota

    The interest in the social aspects of work safety results because the human factor plays a key role in the causes of accidents at work in construction. Statistical data for Poland confirm that organisational and human causes, in particular those related to improper behaviour of employees, account for the highest share in the structure of causes of accidents at work according to the TOL classification.Human behaviour determines the current and future state of occupational safety and requires at least interest. The key factors of human error resulting in accidents include lack of knowledge about hazards in the working environment and appropriate qualifications or irregularities in the behaviour of a group of employees in relation to the adopted social standards, established rules, or inappropriate behaviour. On the one hand, human behaviour depends on the safety culture; on the other hand, it is human behaviour that shapes the climate of work safety by consolidating certain beliefs and attitudes.The measures outlined in work allow for the creation of a desirable safety climate and enable the smooth and compliant operation of the construction site, as well as the economic benefits of minimising losses due to eliminating occupational accidents and illnesses. Social benefits, in turn, can include increased awareness and motivation of construction site personnel, made possible by shaping the desired safety climate by informing and involving workers and their social representatives.The practical application of shaping the safety climate is very important, which will also impact the quality and productivity of the work and the image of the construction workers.The article attempts to systematise terms related to the concept of security climate, and tools for shaping the security climate on the example of construction.

  • Open Access

    Effective Control of Road Luminaires—A Case Study on an Example of a Selected City in Poland

    by Marek Kurkowski, Tomasz Popławski, Maciej Zajkowski, Bartosz Kurkowski, Michał Szota

    According to various estimates, street lighting in Poland consumes between 1.500 and 2.500 GWh per year and is responsible for some greenhouse gas emissions from electricity generation. Also on the basis of estimates, it is estimated that approximately 3.3 million road and street luminaires are used in Poland. The increase in electricity costs, on the one hand, and the technical possibilities in the field of lighting, on the other, force the search for new solutions aimed at saving during the operation of electrical devices and installations, including road lighting installations. One of the methods of saving electricity is to replace the luminaires with energy-saving ones with LED sources, but also with new sodium and metal halide sources. The latter solution is cheaper and allows us to keep existing poles, electrical installation and luminaire heads if their technical parameters have not been degraded. The new and already used luminaires with discharge sources can be used in road lighting, provided that they meet the requirements of Polish law and the EU regulations. Like luminaires with LED sources, they can have an adjustable value of the emitted luminous flux, which allows us to save electricity. One of the methods of saving electricity in road installations is their effective lighting control. Such control can take place at very different levels, from the manual setting of the required light intensity using dimmers to full automation taking into account other factors influencing the operation of the road lighting system, e.g., time of day, intensity of external light, presence of road users, weather conditions and others. The article describes both of the above-mentioned methods, describing their advantages and disadvantages on the basis of actual measurements of working road installations, and analyzes the annual operation of a modernized road lighting installation with automatic lighting control in one of the selected cities in Poland.


  • Open Access

    Change in the surface structure and the oxide layer of the Ti6Al4V ELI alloy as a result of mechanical and heat treatment

    by Michał SZOTA

    Surface treatment, both mechanical, chemical and thermal causes a number of changes to the external structure of meterial details. The obtained properties are intended to improve the quality of material details made of a given alloy or pure metal. This paper presents the results of mechanical surface treatment to the thickness of the oxide layer after heat treatment of the TU6Al14V ELI alloy. The experiments were performed for a rod with a diameter of 5 mm cut into semicircular slices. The samples were mechanically activated by mechanical treatment of the surface: sandblasting with glass balls for 5 minutes, sanded with 40, 180, 220 and 800 grit sandpaper for 7.5 and 15 minutes.Using an optical microscope, the microstructure of the samples etched with Kroll's solution was assessed and the surface roughness parameters were measured.The next step was to carry out the heat treatment (at the temperature of 550 oC, for 5 hours), and then the roughness parameters and the thickness of the oxide layer were measured using a scanning microscope.The conducted research has shown that mechanical treatment of the surface resulting in an increase in surface development causes an increase in the thickness of the oxide layer formed during heat treatment. However, machining to reduce surface development, such as polishing, reduces the thickness of the oxide layer.The test results can be used to obtain the desired thickness of the oxide layer in the production of elements requiring increased resistance to wear or corrosion.

  • Open Access

    Practical and Economical Effects of the Use of Screen Meshes for Steel Nitriding Processes with Glow Plasma

    by Jerzy Pisarek, Tadeusz Frączek, Tomasz Popławski, Michał Szota

    The dynamically developing energy sector forces technologists to create new materials that meet the increasingly higher mechanical, chemical, and electrical requirements. The paper relates to the method of reducing the energy consumption of the plasma nitriding process of austenitic steels. The method proposed by the authors involves the modification of nitriding technology in glow plasma. It consists of introducing perforated screens between the anode and nitrided surface made of a material with a composition similar to the processed material and the use of an HF power supply with controlled mean current generating negative voltage peaks of about 1000 V. Nitriding is carried out in a nitrogen-hydrogen atmosphere. The processed material has a negative potential in relation to the surrounding plasma and strongly negative in relation to the vacuum chamber jacket. The actual treatment is preceded by ionic cleaning of the surface of the detail and heating it to the temperature that activates the diffusion processes. The authors analyse the dynamic distribution of electric fields generated at the surface of the nitrided material with different configurations of the cathode-sample-screen system, trying to find the correlation of treatment parameters with the parameters of the nitrided layer. A significant influence of the screening meshes on the depth of the obtained diffusion layers containing nitrogen was found. The oscilloscopic measurements of the plasma in the boundary layer allowed for the observation of voltage peaks, probably leading to an increase in the peak kinetic energy of nitrogen ions and their easier penetration into the material. The work is of a cognitive nature and is probably one of the first to look for relationships between the dynamic electrical parameters of plasma and the efficiency of nitriding.