RFRyan M. France

Ryan M. France

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Ryan M. France has a total of 283 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Impact of Data Temporal Resolution on the Energy Yield Modeling of Tandem Photovoltaic Devices

    by Rajiv Daxini, William E. McMahon, John F. Geisz, Ryan M. France

    Full physics‐based equivalent circuit models for tandem photovoltaic (PV) devices provide high accuracy but are computationally intensive. This study investigates reducing simulation runtime by downsampling meteorological input data using three methods—mean, median, and slicing—across two distinct climates (Colorado and Oregon) on the energy yield modeling of tandem devices. These methods represent both post‐measurement downsampling (mean and median) and changes in field measurement frequency (slicing). We show that the number of device model evaluations may be reduced by up to 99% while maintaining an annualized energy yield estimate error of less than 0.2% if the resampling method conserves total solar insolation. Conversely, the nonconservative slicing and median methods produce unreliable results with errors exceeding 5% due to inherent energy nonconservation. We identify two primary drivers of modeling error: energy conservation and PV nonlinearity. While these underlying error mechanisms are climate agnostic, the resultant impact on energy yield estimates varies in different meteorological regimes. In high‐volatility environments, smoothing effects suppress subcell mismatch and nonlinear losses, leading to overestimation. In low‐irradiance conditions, efficiency losses dominate, shifting errors toward underestimation. The results of this work provide a framework for high‐speed tandem modeling that balances computational efficiency with site‐specific accuracy.

  • Open Access

    Charge carrier extraction and recombination effects in GaInAs/GaAsP multi-quantum well solar cells

    by Hasan Ahmed, Sethulakshmi J. Sudhakaran, Amani S. Almutairi, Sharmistha Khan, Vincent R. Whiteside, A. Petrou, Ryan M. France, Ian R. Sellers

    The carrier extraction and transport mechanisms as well as the relative contributions of radiative and non-radiative recombination processes are investigated in high-quality strain-balanced GaInAs/GaAsP multi-quantum well solar cells recently implemented in record efficiency multijunction solar cells. A comprehensive suite of complementary characterization techniques including temperature- and suns-dependent photoluminescence and photovoltaic measurements are employed to analyze thermal escape and tunneling rates, which demonstrate the need to move beyond simple drift-diffusion models of p–n junctions. This study examines the processes that best characterize the operation of these devices across varying temperatures using a simple two-diode model, incorporating multiple transport protocols, and provides insights into the performance-limiting processes and pathways for their optimization.


  • Open Access

    Suppression of phase separation in AlGaInAs compositionally graded buffers for 1550 nm photovoltaic converters on GaAs

    by Kevin L. Schulte, John F. Geisz, Harvey L. Guthrey, Ryan M. France, Edgard Winter da Costa, Myles A. Steiner

    We investigate strategies to suppress phase separation and reduce threading dislocation density (TDD) in AlGaInAs compositionally graded buffers (CGBs) that span the lattice constant range from GaAs to InP. Combining the results from high resolution x-ray diffraction, cathodoluminescence, transmission electron microscopy, and photovoltaic device measurements, we correlate the choices of epitaxial growth conditions with the defect structure of the CGBs and subsequent device performance. Both the use of substrates with high misorientation off (100) toward the (111)A plane and Zn doping instead of Si doping are shown to suppress phase separation and reduce TDD. We demonstrate a 0.74 eV GaInAs device grown on a GaAs substrate offcut 19.5° toward (111)A using a Zn-doped AlGaInAs CGB with TDD = 3.5 ± 0.2 × 106 cm−2 that has a bandgap-open circuit voltage offset of only 0.434 V measured under the AM1.5G solar spectrum. We characterized this device under high-intensity irradiance from a 1570 nm laser and measured a 31.9% peak laser power conversion efficiency at 3.6 W/cm2 irradiance. These results provide a roadmap to the manufacture of laser- and thermal-power conversion devices with the performance and cost-effectiveness needed to drive adoption of these technologies at scale.


  • Open Access

    Large Area Near‐Field Thermophotovoltaics for Low Temperature Applications

    by Jennifer Selvidge, Ryan M. France, John Goldsmith, Parth Solanki, Myles A. Steiner, Eric J. Tervo

    Thermophotovoltaics, devices that convert thermal infrared photons to electricity, offer a key pathway for a variety of critical renewable energy technologies including thermal energy storage, waste heat recovery, and direct solar‐thermal power generation. However, conventional far‐field devices struggle to generate reasonable powers at lower temperatures. Near‐field thermophotovoltaics provide a pathway to substantially higher powers by leveraging photon tunneling effects. Here a large area near‐field thermophotovoltaic device is presented, created with an epitaxial co‐fabrication approach, that consists of a self‐supported 0.28 cm 2 emitter‐cell pair with a 150 nm gap. The device generates 1.22 mW at 460 °C, a 25‐fold increase over the same cell measured in a far‐field configuration. Furthermore, the near‐field device demonstrates short circuit current densities greater than the far‐field photocurrent limit at all the temperatures tested, confirming the role of photon tunneling effects in the performance enhancement. Modeling suggests several practical directions for cell improvements and further increases in power density. These results highlight the promise of near‐field thermophotovoltaics, especially for low temperature applications.


  • Doped GaInAs/GaP Quantum Well Superlattice Solar Cells With 27.5% Efficiency

    by Ryan M. France, Myles A. Steiner

    Quantum wells can extend the absorption range of a solar cell and are typically placed in the intrinsic region of the device to enable efficient carrier collection via drift. Thick intrinsic regions are needed for significant absorption in the low bandgap quantum wells, resulting in a large depletion region recombination and ultimately a solar cell with a low fill factor (FF). However, in quantum well superlattice solar cells where tunneling plays a dominant role in carrier transport, collection by carrier diffusion may be possible, relieving the requirement for quantum wells to be placed in the intrinsic region. Here, we investigate doping in stress-balanced quantum well superlattice solar cells using thin 2 nm GaP barriers. Doping reduces J02 depletion region recombination and improves the solar cell FF up to 86.7%, but very high doping eventually reduces the carrier collection, leading to a tradeoff in efficiency. We show that the barrier thickness also plays an important role in carrier collection, and we demonstrate high efficiency 27.5% single-junction devices with a doped superlattice.


  • Operando Temperature Measurements of Photovoltaic Laser Power Converter Devices Under Continuous High-Intensity Illumination

    by John F. Geisz, Daniel J. Friedman, Myles A. Steiner, Ryan M. France, Tao Song

    Photovoltaic devices that operate under extremely high irradiances, such as laser power converters (LPCs), may also operate at elevated temperatures, even under active cooling, as the result of large temperature gradients. We demonstrate the operation of GaAs LPC devices under orders of magnitude of irradiances up to 150 W/cm 2 in a monochromatic laser simulator with an active cooling stage. The steady-state open-circuit voltage ( V OC ) as a function of irradiance is known to droop at high irradiance as the result of junction heating, but the junction temperature can be difficult to measure by conventional methods. Fast, transient V OC measurements under these extreme operating conditions are used here to determine the junction temperature. Empirical V OC temperature coefficients of the devices at each irradiance of interest are determined and used as an integral part of this technique. We show that the thermal design of different LPC devices strongly affects the operating temperature of the junctions. Knowledge of the operating temperature can be a strong tool for understanding the nature of loss mechanisms and improving the design for the operation of photovoltaic LPCs at high irradiances. This technique can be used for laboratory devices during initial design as well as to characterize mass-produced and packaged devices for quality control.


  • Photovoltaic device innovation for a solar future

    by Pierre Verlinden, David L. Young, Gang Xiong, Matthew O. Reese, Lorelle M. Mansfield, Michael Powalla, Stefan Paetel, Ryan M. France, Philip T. Chiu, Nancy M. Haegel


  • III-V Solar Cells Grown Directly on V-Groove Si Substrates

    by Theresa E. Saenz, Jacob T. Boyer, John S. Mangum, Anica N. Neumann, Myles A. Steiner, Ryan M. France, William E. McMahon, Jeramy D. Zimmerman, Emily L. Warren

    We report on the development of GaAs solar cells directly grown on nanopatterned V-groove Si substrates by metalorganic vapor-phase epitaxy (MOVPE). A low threading dislocation density (TDD) of 3×106 cm-2 was achieved in the GaAs through a combination of thermal cycle annealing and InGaAs dislocation filter layers. Front junction GaAs solar cells were then grown on these low-TDD substrates, but preliminary devices produced a conversion efficiency of only 6.6% without an anti-reflection coating. Electron channeling constast imaging measurements on this cell showed a high density of misfit dislocations at the interface between the AlInP/GaInP window layer and GaAs absorber, likely causing poor surface passivation and thus poor performance. The source of these misfit dislocations will be discussed, as well as mitigation strategies to improve solar cell performance.

  • Coalescence of GaP on V-Groove Si for III-V/Si Solar Cells

    by Theresa E. Saenz, John S. Mangum, Olivia D. Schneble, Anica N. Neumann, Ryan M. France, William E. McMahon, Jeramy D. Zimmerman, Emily L. Warren

    Here, we study the morphology and strain relaxationof GaP as it coalesces over V-groove Si. V-groove nanopatterning is a promising way to create substrates that enable the grow of high quality III-V on Si, and it offers a route to III-V growth on low-cost Si substrates rougher than those typically required for epitaxial growth. We find that even at optimized growth conditions, careful control of the geometry of the nanopatterns is needed to promote a smooth morphology of the III-V material. We also find that strain relaxation, which resulted in an elevated threading dislocation density, occurs during the coalescence process. With further dislocation reduction, the templates described here are promising for further development of III-V solar cells on Si. Additional work on growing these templates on low-cost, wet-polished Si will also be presented.

  • Open Access

    Optically thick GaInAs/GaAsP strain-balanced quantum-well tandem solar cells with 29.2% efficiency under the AM0 space spectrum

    by Ryan M. France, Jennifer Selvidge, Kunal Mukherjee, Myles A. Steiner

    GaAs is often used as a multijunction subcell due to its high material quality on GaAs substrates, despite having a non-optimal bandgap. The bandgap can be beneficially reduced using many layers of thin, strain-balanced GaInAs in a superlattice or quantum well device, but achieving excellent carrier collection without increased recombination has proven challenging. Here, we develop and demonstrate high performance, optically thick GaInAs/GaAsP strain-balanced solar cells. Excellent material quality is achieved in thick superlattices by using growth conditions that limit progressive thickness and composition fluctuations. Bandgap-voltage offsets as low as 0.31 V are shown in superlattice cells using thin, highly strained GaP barriers. Optically thick superlattice cells with over 2500 nm of total GaInAs in the depletion region are developed, enabling 3.8 mA/cm2 of extra photocurrent beyond the GaAs band edge under the AM0 space spectrum. Optimized superlattice solar cells are incorporated into two-junction devices that achieve 29.2% efficiency under the AM0 space spectrum due to their improved bandgap combination and high subcell voltages.