Dong Chung Nguyen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Dong Chung Nguyen has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Yasuaki Ishikawa
College of Science and Engineering, Aoyama Gakuin University, Sagamihara, Kanagawa 252-5258, Japan
4 shared publications Fumihiro Murata
2 shared publicationsKota Sato
2 shared publicationsMasaya Hamada
2 shared publicationsYasuaki Ishikawa
2 shared publicationsAn Khac Dao
Energy Materials and Devices Lab, Institute of Materials Science, Vietnam Academy of Science and Technology, Hanoi, Vietnam
1 shared publication
Latest Publications
Analysis and Selection of Optimal Perovskite/Silicon Tandem Configuration for Building Integrated Photovoltaics Based on Their Annual Outdoor Energy Yield Predicted by Machine Learning
Accurate estimation of annual output energy yield () for perovskite/silicon (PSK/cSi) tandem solar cells is pivotal in assessing their suitability for building‐integrated photovoltaics (BIPV). This study pioneers five machine learning models of ensembles of trees, Gaussian process regressions, regression trees, support vector machines, and artificial neural networks (ANN) to predict output power density and compute for 2T, 3T, and 4T PSK/cSi tandem configurations in Japan's outdoor conditions. Seven predictive inputs of visible‐light solar irradiance, near‐infrared‐light solar irradiance, incident solar spectrum angle, solar module temperature, perovskite thickness, perovskite bandgap, and terminal of tandem configuration (T) drive the machine learning models. These models optimize predictions using k‐fold cross‐validation and Bayesian algorithms, showcasing superior precision in prediction compared to prior models. The ANN model emerges as the best model, displaying the minimal error in predicting , used to estimate across five Japanese locations (Gifu, Naganuma, Okinoerabu, Tosu, and Tsukuba). Results from these locations in blue‐rich solar spectrum zones identify the 4T PSK/cSi tandem configuration, featuring the most outstanding mean maximal (93.63, 263.02, 153.59, and 91.75 kWh m−2 for the east, rooftop, south, and west directions), as the prime candidate for BIPV applications.
Analysis and Selection of Optimal Perovskite/Silicon Tandem Configuration for Building Integrated Photovoltaics Based on Their Annual Outdoor Energy Yield Predicted by Machine Learning
Accurate estimation of annual output energy yield () for perovskite/silicon (PSK/cSi) tandem solar cells is pivotal in assessing their suitability for building‐integrated photovoltaics (BIPV). This study pioneers five machine learning models of ensembles of trees, Gaussian process regressions, regression trees, support vector machines, and artificial neural networks (ANN) to predict output power density and compute for 2T, 3T, and 4T PSK/cSi tandem configurations in Japan's outdoor conditions. Seven predictive inputs of visible‐light solar irradiance, near‐infrared‐light solar irradiance, incident solar spectrum angle, solar module temperature, perovskite thickness, perovskite bandgap, and terminal of tandem configuration (T) drive the machine learning models. These models optimize predictions using k‐fold cross‐validation and Bayesian algorithms, showcasing superior precision in prediction compared to prior models. The ANN model emerges as the best model, displaying the minimal error in predicting , used to estimate across five Japanese locations (Gifu, Naganuma, Okinoerabu, Tosu, and Tsukuba). Results from these locations in blue‐rich solar spectrum zones identify the 4T PSK/cSi tandem configuration, featuring the most outstanding mean maximal (93.63, 263.02, 153.59, and 91.75 kWh m−2 for the east, rooftop, south, and west directions), as the prime candidate for BIPV applications.
- Open Access
Nitrogen-Doped Graphene Quantum Dot–Tin Dioxide Nanocomposite Ultrathin Films as Efficient Electron Transport Layers for Planar Perovskite Solar Cells
Tin dioxide (SnO2) has recently been recognized as an excellent electron transport layer (ETL) for perovskite solar cells (PSCs) due to its advantageous properties, such as its high electron mobility, suitable energy band alignment, simple low-temperature process, and good chemical stability. In this work, nitrogen-doped graphene quantum dots (N-GQDs) were prepared using a hydrothermal method and then used to fabricate N-GQD:SnO2 nanocomposite ultrathin films. N-GQD:SnO2 nanocomposite ultrathin films were investigated and applied as electron transport layers in planar PSCs. The presence of N-GQDs with an average size of 6.2 nm in the nanocomposite improved its morphology and reduced surface defects. The excitation–emission contour map indicated that the N-GQDs exhibited a remarkably enhanced light-harvesting capability due to the possibility of absorbing UV light and producing emissions in the visible range. The quenching of photoluminescence spectra showed that the N-GQDs in nanocomposite ultrathin films improved electron extraction and reduced charge recombination. As a result, the power conversion efficiency (PCE) of our planar PSCs fabricated with the optimized N-GQD:SnO2 nanocomposite electron transport layer was improved by 20.4% over pristine SnO2-based devices.
Open AccessNitrogen-Doped Graphene Quantum Dot–Tin Dioxide Nanocomposite Ultrathin Films as Efficient Electron Transport Layers for Planar Perovskite Solar Cells
Tin dioxide (SnO2) has recently been recognized as an excellent electron transport layer (ETL) for perovskite solar cells (PSCs) due to its advantageous properties, such as its high electron mobility, suitable energy band alignment, simple low-temperature process, and good chemical stability. In this work, nitrogen-doped graphene quantum dots (N-GQDs) were prepared using a hydrothermal method and then used to fabricate N-GQD:SnO2 nanocomposite ultrathin films. N-GQD:SnO2 nanocomposite ultrathin films were investigated and applied as electron transport layers in planar PSCs. The presence of N-GQDs with an average size of 6.2 nm in the nanocomposite improved its morphology and reduced surface defects. The excitation–emission contour map indicated that the N-GQDs exhibited a remarkably enhanced light-harvesting capability due to the possibility of absorbing UV light and producing emissions in the visible range. The quenching of photoluminescence spectra showed that the N-GQDs in nanocomposite ultrathin films improved electron extraction and reduced charge recombination. As a result, the power conversion efficiency (PCE) of our planar PSCs fabricated with the optimized N-GQD:SnO2 nanocomposite electron transport layer was improved by 20.4% over pristine SnO2-based devices.
- Open Access
- 2 September 2022
- Published by Elsevier in Energy Reports
- Vol. 8, 10819-10832
Artificial neural network for predicting annual output energy of building-integrated photovoltaics based on the 2-terminal perovskite/silicon tandem cells under realistic conditions
- 2 September 2022
- Published by Elsevier in Energy Reports
- Vol. 8, 10819-10832
Open AccessArtificial neural network for predicting annual output energy of building-integrated photovoltaics based on the 2-terminal perovskite/silicon tandem cells under realistic conditions
- Open Access
- 15 March 2022
- Published by Wiley in Energy Science & Engineering
- Vol. 10 (4) , 1373-1383
Evaluation of annual performance for building‐integrated photovoltaics based on 2‐terminal perovskite/silicon tandem cells under realistic conditions
The authors optimized the thickness of the layers in the 1.67‐eV‐bandgap‐perovskite sub‐cell of a 2‐terminal perovskite/silicon monolithic tandem solar cell under standard test conditions to get the current matching between the top and the bottom sub‐cells. Based on that optimized structure of the tandem cell, we characterized, calculated, and analyzed the annual output energy and the annual efficiency of the tandem cells on the facades and the rooftop of buildings under realistic conditions composed of module temperature, realistic illumination irradiance, and incident angle directly measured in Gifu, Japan in 2015. Consequently, the obtained annual output energy is 279.52, 238.89, 129.99, and 115.21 kWh/m2with the corresponding annual efficiency of 22.42%, 19.70%, 10.50%, and 9.19% for the tandem solar cells mounted on the rooftop, the south, east, and west facades of the buildings, respectively. Thus, the rooftop and the south face of the buildings are the preferred directions for the BIPV application to gain higher energy.
- 15 March 2022
- Published by Wiley in Energy Science & Engineering
- Vol. 10 (4) , 1373-1383
Open AccessEvaluation of annual performance for building‐integrated photovoltaics based on 2‐terminal perovskite/silicon tandem cells under realistic conditions
The authors optimized the thickness of the layers in the 1.67‐eV‐bandgap‐perovskite sub‐cell of a 2‐terminal perovskite/silicon monolithic tandem solar cell under standard test conditions to get the current matching between the top and the bottom sub‐cells. Based on that optimized structure of the tandem cell, we characterized, calculated, and analyzed the annual output energy and the annual efficiency of the tandem cells on the facades and the rooftop of buildings under realistic conditions composed of module temperature, realistic illumination irradiance, and incident angle directly measured in Gifu, Japan in 2015. Consequently, the obtained annual output energy is 279.52, 238.89, 129.99, and 115.21 kWh/m2with the corresponding annual efficiency of 22.42%, 19.70%, 10.50%, and 9.19% for the tandem solar cells mounted on the rooftop, the south, east, and west facades of the buildings, respectively. Thus, the rooftop and the south face of the buildings are the preferred directions for the BIPV application to gain higher energy.
- 4 December 2020
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 29 (4) , 423-432
Recover possibilities of potential induced degradation caused by the micro‐cracked locations in p‐type crystalline silicon solar cells
Potential induced degradation (PID) has been affecting the performance, durability, and reliability of crystalline Si solar cells/modules. The authors demonstrate that micro‐cracks also act as the additional recombination centers, which reduce short‐circuit current density (Jsc), open‐circuit voltage (Voc), and the effective lifetime of carriers in solar cells, in PID condition. This hypothesis was confirmed by external quantum efficiency measurements and microwave photo‐conductance decay method at the micro‐cracked areas before and after PID stress tests. In addition, the PID recovery was made significantly but non‐fully for the laminated micro‐cracked modules owing to the electrical PID recovery method. In addition, the authors showed and discussed the challenging problems in recovering the performance of the PID‐affected micro‐cracked solar modules without lamination. The achieved results from 11 cycles of PID stress/recovery tests with the same duration of PID stress and recovery processes showed that an exponentially decreasing function fits the correlation between the relative losses of Pmax, Voc, fill factor (FF), and Jsc due to the PID stress process and the number of the PID stress/recovery cycles. This provides a model for the estimation of the relative losses of Pmax, Voc, FF, and Jsc due to the PID stress process versus the number of the PID stress/recovery cycles. Finally, based on the decreasing tendency in the performance loss of the PID‐affected laminated micro‐cracked solar modules after PID stress/recovery cycles, the authors suggest that cyclic PID tests with suitable conditions might be a reasonable approach to control PID.
- 4 December 2020
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 29 (4) , 423-432
Recover possibilities of potential induced degradation caused by the micro‐cracked locations in p‐type crystalline silicon solar cells
Potential induced degradation (PID) has been affecting the performance, durability, and reliability of crystalline Si solar cells/modules. The authors demonstrate that micro‐cracks also act as the additional recombination centers, which reduce short‐circuit current density (Jsc), open‐circuit voltage (Voc), and the effective lifetime of carriers in solar cells, in PID condition. This hypothesis was confirmed by external quantum efficiency measurements and microwave photo‐conductance decay method at the micro‐cracked areas before and after PID stress tests. In addition, the PID recovery was made significantly but non‐fully for the laminated micro‐cracked modules owing to the electrical PID recovery method. In addition, the authors showed and discussed the challenging problems in recovering the performance of the PID‐affected micro‐cracked solar modules without lamination. The achieved results from 11 cycles of PID stress/recovery tests with the same duration of PID stress and recovery processes showed that an exponentially decreasing function fits the correlation between the relative losses of Pmax, Voc, fill factor (FF), and Jsc due to the PID stress process and the number of the PID stress/recovery cycles. This provides a model for the estimation of the relative losses of Pmax, Voc, FF, and Jsc due to the PID stress process versus the number of the PID stress/recovery cycles. Finally, based on the decreasing tendency in the performance loss of the PID‐affected laminated micro‐cracked solar modules after PID stress/recovery cycles, the authors suggest that cyclic PID tests with suitable conditions might be a reasonable approach to control PID.
- 1 January 2016
- Published by The Electromagnetics Academy in Progress In Electromagnetics Research M
- Vol. 52, 21-31
NUMERICAL ESTIMATION OF THE COMPLEX REFRACTIVE INDEXES BY THE ALTITUDE DEPENDING ON WAVE FREQUENCY IN THE IONIZED REGION OF THE EARTH ATMOSPHERE FOR MICROWAVES INFORMATION AND POWER TRANSMISSIONS
- 1 January 2016
- Published by The Electromagnetics Academy in Progress In Electromagnetics Research M
- Vol. 52, 21-31
NUMERICAL ESTIMATION OF THE COMPLEX REFRACTIVE INDEXES BY THE ALTITUDE DEPENDING ON WAVE FREQUENCY IN THE IONIZED REGION OF THE EARTH ATMOSPHERE FOR MICROWAVES INFORMATION AND POWER TRANSMISSIONS
- 1 October 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21621020,p. 522-527
Simulation, design and fabrication of 4-element and 32-element rectenna array applying in the wireless power transmission
Recently the wireless power transmission (WPT) technology is a priority research direction in the world. The WPT can be divided into two main orientations: firstly WPT using inductive coupling, resonant coupling, and secondly WPT using the beam power technologies by microwave power beam and laser power beam. The WPT system with the beam power technology consists of a solar power satellite and rectenna array. The solar power satellite is composed of a large solar cell matrix to receive solar energy, microwave devices (or laser devices) to convert from solar energy into microwave (or laser) beam power, and a transmitting antenna array to transmit the power beam via the space to the rectenna array. The rectenna array receives microwave power beam and rectifies to DC power. The most important requirement for WPT using beam power technology is high collection efficiency. In order to get high collection efficiency, the rectenna array has to fulfill optimal requirement of its efficiency. This requirement plays a very important role in a wireless power transmission system. In this paper, we represent the simulation, design and the experimental fabrication of rectenna array with 4-element and 32-element rectenna array using micro strip dipole antennas with the integrated J shaped balun at the frequency of 2.45 GHz. Some simulation, design and fabrication results as well as several experimental measurement results of 4-element rectenna were shown and discussed.
- 1 October 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21621020,p. 522-527
Simulation, design and fabrication of 4-element and 32-element rectenna array applying in the wireless power transmission
Recently the wireless power transmission (WPT) technology is a priority research direction in the world. The WPT can be divided into two main orientations: firstly WPT using inductive coupling, resonant coupling, and secondly WPT using the beam power technologies by microwave power beam and laser power beam. The WPT system with the beam power technology consists of a solar power satellite and rectenna array. The solar power satellite is composed of a large solar cell matrix to receive solar energy, microwave devices (or laser devices) to convert from solar energy into microwave (or laser) beam power, and a transmitting antenna array to transmit the power beam via the space to the rectenna array. The rectenna array receives microwave power beam and rectifies to DC power. The most important requirement for WPT using beam power technology is high collection efficiency. In order to get high collection efficiency, the rectenna array has to fulfill optimal requirement of its efficiency. This requirement plays a very important role in a wireless power transmission system. In this paper, we represent the simulation, design and the experimental fabrication of rectenna array with 4-element and 32-element rectenna array using micro strip dipole antennas with the integrated J shaped balun at the frequency of 2.45 GHz. Some simulation, design and fabrication results as well as several experimental measurement results of 4-element rectenna were shown and discussed.