Konrad Stefański
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Konrad Stefański has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
Daniel Gapiński
Kielce University of Technology
2 shared publicationsVladimir Shestakov
2 shared publicationsArthur Suharev
1 shared publicationLukasz Nocon
Kielce University of Technology, Faculty of Mechatronics and Machine Design, Department of Computing and Armament, Poland
1 shared publication- Margarita Urbaha
Riga Technical University
1 shared publication - Marta Grzyb
Faculty of Mechatronics and Mechanical Engineering, Department of Computer and Armament Technologies, Kielce University of Technology, al. Tysiąclecia Państwa Polskiego 7, 25-314 Kielce, Poland
1 shared publication
Latest Publications
- Open Access
- 1 January 2020
- Published by Vilnius Gediminas Technical University in Aviation
- Vol. 24 (4) , 169-176
APPLICATION OF ACOUSTIC EMISSION METHOD FOR THE EVALUATION OF THE MICROMECHANICS OF DESTRUCTION OF FIBERGLASS MATERIALS UNDER STATIC LOAD
The paper presents the results of experimental studies using the acoustic emission method of samples made of fiberglass, the design feature of which is the presence of both base fibers and weft fibers. The test data are presented in relative units and the concept of staged damage accumulation is used, which allows one to recognize subtle phenomena of the nature of the destruction of fiberglass. Tests of the samples with a transverse arrangement of fibers with respect to the applied load showed that the fracture process both in the strain parameters and in the parameters of the total acoustic emission has two stages of damage accumulation: the stage of proportional change of these parameters from stress and the stage of intensive increment of these parameters. In this case, the parameter of the total acoustic emission shows that this process of destruction begins earlier by 5-6% than the strain parameter shows. The proposed methodology and equipment allows us to identify the nature of fracture and assess the tensile strength of such a "staged" composition, and also to solve the problem of what affected the structural unity violations, which may be due to the presence of a set of cracks formed during manufacturing or under the influence of stresses and the external environment during the process of loading.
- 1 January 2020
- Published by Vilnius Gediminas Technical University in Aviation
- Vol. 24 (4) , 169-176
Open AccessAPPLICATION OF ACOUSTIC EMISSION METHOD FOR THE EVALUATION OF THE MICROMECHANICS OF DESTRUCTION OF FIBERGLASS MATERIALS UNDER STATIC LOAD
The paper presents the results of experimental studies using the acoustic emission method of samples made of fiberglass, the design feature of which is the presence of both base fibers and weft fibers. The test data are presented in relative units and the concept of staged damage accumulation is used, which allows one to recognize subtle phenomena of the nature of the destruction of fiberglass. Tests of the samples with a transverse arrangement of fibers with respect to the applied load showed that the fracture process both in the strain parameters and in the parameters of the total acoustic emission has two stages of damage accumulation: the stage of proportional change of these parameters from stress and the stage of intensive increment of these parameters. In this case, the parameter of the total acoustic emission shows that this process of destruction begins earlier by 5-6% than the strain parameter shows. The proposed methodology and equipment allows us to identify the nature of fracture and assess the tensile strength of such a "staged" composition, and also to solve the problem of what affected the structural unity violations, which may be due to the presence of a set of cracks formed during manufacturing or under the influence of stresses and the external environment during the process of loading.
- 21 February 2019
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2077 (1) , 020022
Assessment of professionally important qualities aviation technical staff
The quality of training of aviation technical personnel and their professionalism are evaluated on the basis of closely related operational companies and educational institutions in the form of airline managers ’reviews, interviews, graduates’ interviews, etc. However, such studies are practically absent, as well as scientific approaches and technologies for their conduct. At the same time, the current level of achievements in the field of information technology makes it possible to bring this work to a new, effective level of conformity assessment, issued by aviation specialists, the requirements of the aviation industry. This article presents the results of research on the development of professionally important qualities in future specialists at the stage of training.
- 21 February 2019
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2077 (1) , 020022
Assessment of professionally important qualities aviation technical staff
The quality of training of aviation technical personnel and their professionalism are evaluated on the basis of closely related operational companies and educational institutions in the form of airline managers ’reviews, interviews, graduates’ interviews, etc. However, such studies are practically absent, as well as scientific approaches and technologies for their conduct. At the same time, the current level of achievements in the field of information technology makes it possible to bring this work to a new, effective level of conformity assessment, issued by aviation specialists, the requirements of the aviation industry. This article presents the results of research on the development of professionally important qualities in future specialists at the stage of training.
- 1 January 2019
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2077, 020054
The analysis of the anti-aircraft missile flight controlled with gyroscopic system
- 1 January 2019
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2077, 020054
The analysis of the anti-aircraft missile flight controlled with gyroscopic system
- 1 January 2019
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2077, 020056
Analysis of the affecting factors on aircraft takeoff and landing ground path length
- 1 January 2019
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2077, 020056
Analysis of the affecting factors on aircraft takeoff and landing ground path length
- 1 January 2016
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 817, 93-103
An Example of a Special Algorithm Application for Control of Aerial Guided Bomb Flight, during Guidance on the Ground Moving Target
This paper presents the analysis of the variety of methods regarding aerial guided bomb control during the ground attack on a moving target. Based on this method there was an earlier research regarding motion control of the three degrees of freedom gyroscope axis [1,2] during space exploration and discovered target tracking. Positive results obtained during that research led to conclusion that the proposed control method will be accurate to establish a control force for aerial bomb guiding. This method is based on the use of phase trajectories control deviations. Switching of the control forces in the particular phase plane points causes the deviations to decrease to zero and facilitates the proper trajectory of the bomb. This paper presents a switching algorithm, equations of kinematics and dynamics of a bomb flight-path and the variety of examples of a numerical simulations. Obtained results were presented in the graphic form.
- 1 January 2016
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 817, 93-103
An Example of a Special Algorithm Application for Control of Aerial Guided Bomb Flight, during Guidance on the Ground Moving Target
This paper presents the analysis of the variety of methods regarding aerial guided bomb control during the ground attack on a moving target. Based on this method there was an earlier research regarding motion control of the three degrees of freedom gyroscope axis [1,2] during space exploration and discovered target tracking. Positive results obtained during that research led to conclusion that the proposed control method will be accurate to establish a control force for aerial bomb guiding. This method is based on the use of phase trajectories control deviations. Switching of the control forces in the particular phase plane points causes the deviations to decrease to zero and facilitates the proper trajectory of the bomb. This paper presents a switching algorithm, equations of kinematics and dynamics of a bomb flight-path and the variety of examples of a numerical simulations. Obtained results were presented in the graphic form.
- 1 May 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 551-556
The analysis of homing of aerial guided bomb on the ground target by means of special method of control
This paper presents an essay of possibility analysis of an application of the special method of aerial guided bomb control during its homing on ground target. The discussed method was previously applied to axis motion control of gyroscope with three degrees of freedom. The method consist in using of the phase trajectories of control deviations. The switching of control forces in appropriate points in the phase plane causes the reduction of the deviations to zero and realization of appropriate bomb flight path. In the paper the switching algorithm, kinematic and dynamic equations of bomb flight and a number of numerical examples are presented. The results are presented in a graphical form.
- 1 May 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 551-556
The analysis of homing of aerial guided bomb on the ground target by means of special method of control
This paper presents an essay of possibility analysis of an application of the special method of aerial guided bomb control during its homing on ground target. The discussed method was previously applied to axis motion control of gyroscope with three degrees of freedom. The method consist in using of the phase trajectories of control deviations. The switching of control forces in appropriate points in the phase plane causes the reduction of the deviations to zero and realization of appropriate bomb flight path. In the paper the switching algorithm, kinematic and dynamic equations of bomb flight and a number of numerical examples are presented. The results are presented in a graphical form.
- Open Access
- 3 April 2014
- Published by Vilnius Gediminas Technical University in Aviation
- Vol. 18 (1) , 20-27
CONTROL OF DESIGNED TARGET SEEKER, USED IN SELF-GUIDED ANTI-AIRCRAFT MISSILES, BY EMPLOYING MOTORS WITH A CONSTANT TORQUE
This paper presents the results of research on control of a designed target seeker (Gapiński, D. 2008), which was carried out using of the so-called “signum” function. The technical feasibility of controlling the seeker axis in the phase of searching the air space with the simultaneous consideration of the process of scanning through the optoelectronic system of the head was verified. The numerical analysis of the device dynamics was presented and the analysis of the possibility of practical application previously mentioned method for the control of the designed seeker was conducted. The results are presented in a graphical form as well.
- 3 April 2014
- Published by Vilnius Gediminas Technical University in Aviation
- Vol. 18 (1) , 20-27
Open AccessCONTROL OF DESIGNED TARGET SEEKER, USED IN SELF-GUIDED ANTI-AIRCRAFT MISSILES, BY EMPLOYING MOTORS WITH A CONSTANT TORQUE
This paper presents the results of research on control of a designed target seeker (Gapiński, D. 2008), which was carried out using of the so-called “signum” function. The technical feasibility of controlling the seeker axis in the phase of searching the air space with the simultaneous consideration of the process of scanning through the optoelectronic system of the head was verified. The numerical analysis of the device dynamics was presented and the analysis of the possibility of practical application previously mentioned method for the control of the designed seeker was conducted. The results are presented in a graphical form as well.
- 1 October 2013
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 210, 145-155
A Control of Modified Optical Scanning and Tracking Head to Detection and Tracking Air Targets
The dissertation presents the method of controlling the designed scanning and tracking head (optical target seeker) [ which is used for detecting and tracking air targets emitting their own radiation, e.g. infrared radiation. The control algorithm consists in using the phase trajectories of control deviations. Digital simulations of the proposed solution have been conducted. The results of those simulations have been presented in a graphical form.
- 1 October 2013
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 210, 145-155
A Control of Modified Optical Scanning and Tracking Head to Detection and Tracking Air Targets
The dissertation presents the method of controlling the designed scanning and tracking head (optical target seeker) [ which is used for detecting and tracking air targets emitting their own radiation, e.g. infrared radiation. The control algorithm consists in using the phase trajectories of control deviations. Digital simulations of the proposed solution have been conducted. The results of those simulations have been presented in a graphical form.
- 1 January 2007
- Published by Begell House Inc. Publishers in Journal of Long-Term Effects of Medical Implants
- Vol. 39 (6) , 60-67
Automatic Control System of Homing Missile with Scanning On-Board Device
Dynamics of controlled gyroscope is investigated and algorithm for control in space scanning and tracking mode for detected object was adduced. The control system of the process of missile homing is equipped with optical target coordinator.
- 1 January 2007
- Published by Begell House Inc. Publishers in Journal of Long-Term Effects of Medical Implants
- Vol. 39 (6) , 60-67
Automatic Control System of Homing Missile with Scanning On-Board Device
Dynamics of controlled gyroscope is investigated and algorithm for control in space scanning and tracking mode for detected object was adduced. The control system of the process of missile homing is equipped with optical target coordinator.