STSeref Kemal Talas

Seref Kemal Talas

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Seref Kemal Talas has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Design and Development of a Growing Pneumatic Soft Robot

    by Seref Kemal Talas, Bora Alp Baydere, Timur Altinsoy, Cem Tutcu, Evren Samur

    Soft continuum robots are getting more popular in areas such as minimally invasive surgery, search and rescue, and inspection due to their inherent compliance and flexibility. However, most of the conventional continuum robots still lack the ability to significantly change size and length. Growth as a means of robotic locomotion is a novel actuation method that can be used to overcome this disadvantage. In this study, we introduce a growing pneumatic soft robot made up of pressurized thin-walled tubings that can move in three-dimensional space with an extension ratio only limited by manufacturing capabilities. Besides the ability to grow from the tip, this design provides active steering by controlling the speed of each tubing separately, controllable stiffness that can be changed during motion, and capability to carry a tool channel. We present models to estimate tip force and position and experimentally verify the force model and robot kinematics. Open-loop speed controller has an overall root mean square error of 2.69% for speeds between 20 and 300 mm/s. The position controller based on the kinematic model has a mean positioning error of 13.9 mm at 100 mm and 22.6 mm at 200 mm longitudinal distance. Robot can produce a tip force of 20.1 N at 150 kPa tubing pressure and reach a maximum speed of 1490 mm/s at 100 kPa. We also demonstrate the navigation capabilities of the robot both in open field and in constrained environments.


  • Quasi-static modeling of a novel growing soft-continuum robot

    by Cem Tutcu, Bora A. Baydere, Seref K. Talas, Evren Samur

    Soft-continuum robots attract researchers owing to their advantages over rigid-bodied robots such as adaptation of the flexible structure to tortuous environments, and compliant contact mechanics. The need for new modeling methods to attain precise control for such systems has emerged from the recent rapid progress in soft robotics. This article presents a quasi-static model for a growing soft-continuum robot that is propelled via thin-walled inflated tubes, and steered by the difference between tube lengths. Therefore, the robot shaft is modeled as a series of inflated beams under deformation. A quasi-static model coupled with a kinematic model is developed to accurately position the end effector while accounting for the inflated beam stiffness and end-effector loads. The proposed model calculates control parameters, namely tube lengths and tendon tensions required to maintain the end effector at a certain position. Tip deflection due to end-effector loading is calculated and kinematic model inputs are updated to correct positioning error caused by shaft deformation. The model is simulated for the soft-continuum robot moving on a path to show the change in model parameters for various end-effector positions. Results demonstrate the significance of including pressurized tube stiffness in the model for growing robots of similar type. Second, the need for tendons in addition to pneumatic actuation is emphasized for accurate positioning of the end effector under loading. The proposed model offers a potential method for simulation and control of similar growing soft-continuum robots presented in the literature.