MAMuhammad Arshad

Muhammad Arshad

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Muhammad Arshad has a total of 297 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Synthesis of Cl@Ti 3 C 2 for supercapacitor applications and first-principles insights into its enhanced electrochemical properties

    by Sheheera Irfan, Eisha Naeem, Yasir A. Haleem, Muhammad Usman, Muhammad Arshad, Abdul Ghafar Wattoo, Abdullah K. Alanazi

    This study investigates the properties of Cl@Ti 3 C 2 for supercapacitor applications, with experimental findings supported by first-principles calculations.

  • Synthesis of reduced graphene-based nickel oxide hybrid material for ammonia sensing

    by Fatima Mehmood, Sofia Siddique, Abdul Shakoor, Javed Hussain, Gul Naz, Saqlain A Shah, Muhammad Arshad

    The reduced graphene oxide (rGO)-based nickel oxide (NiO) hybrid material holds significant potential for advancing ammonia sensing technology due to its synergistic properties, enabling high sensitivity, selectivity, and rapid response. In this study, rGO-based nickel oxide hybrid materials were hydrothermally synthesized with varying concentrations of rGO (5 wt%, 10 wt%, and 15 wt%) to evaluate their response to ammonia gas exposure. The as-synthesized hybrid structures were characterized using x-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and energy-dispersive x-ray spectroscopy (EDS) to determine their crystalline structure, morphology, and elemental composition. Diffuse reflectance spectroscopy (DRS) revealed that increasing the graphene content decreased the bandgap to 3.18 eV for 15 wt% of rGO, compared to NiO’s bandgap of 3.6 eV. X-ray photoelectron spectroscopy (XPS) provided insights into the chemical composition of rGO and the electronic states of nickel. A four-probe IV analysis was conducted to investigate conductivity and ammonia-sensing behavior. Exposure of pure nickel oxide to ammonia gas increased the material’s current and resistance from 400 nA to 1 mA and 250 MΩ to 1 kΩ, respectively. When hybrid structures with 15 wt% rGO were used to detect ammonia gas, the current and resistance changed from 16 μA to 19 mA and 62.5 kΩ to 52.6 Ω, respectively. The hybrid sensing layer demonstrated a significantly more desirable response than pure NiO. Therefore, the sample with 15 wt% rGO exhibited optimal conductivity and sensing capabilities.


  • Investigating ferromagnetic response in monolayer CVD grown MoS2 flakes using quantum weak measurement

    by Wardah Mahmood, Muhammad Hammad Raza Gardezi, Muhammad Arshad, Muddasir Naeem, Ammar Ahmed Khan, Syed Adnan Raza, Muhammad Sabieh Anwar

    We synthesize MoS2 atomic layer flakes at different growth conditions to tailor S-terminated and Mo-terminated edge defect states that are investigated for their ferromagnetic response. We leverage quantum weak measurement principles to construct a spin Hall effect of light-based magneto-optic Kerr effect (SHEL-MOKE) setup to sense the ultra-small magnetic response from the synthesized atomic layers. We establish that Mo-terminated edge states are the primary source of ferromagnetic response from MoS2 flakes, which is consistent with x-ray photoelectron, Raman, and photoluminescence spectroscopic results. In the process, we demonstrate SHEL-MOKE to be a robust technique to investigate ultra-weak magnetic properties in novel atomic-scale materials. Our findings highlight the importance of controlling edge terminations in engineering magnetism at the nanoscale and underscore the potential of weak value amplification based optical measurements.

  • Open Access

    Polyol Formation of Silver@Metal Oxides Nanohybrid for Photocatalytic and Antibacterial Performance

    by Jovairya Azam, Zahoor Ahmad, Ali Irfan, Asima Naz, Muhammad Arshad, Rabia Sattar, Mohammad Raish, Bakar Bin Khatab Abbasi, Yousef A. Bin Jardan

    The polyol method under a single pot has successfully produced a coating of CuO, TiO2, and the combination of CuO/TiO2 around Ag NWs under sequential addition. The Ag NWs and their coating with a pure metal oxide and a hybrid of metal oxide were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM) coupled with EDX, X-ray photoelectron spectroscopy (XPS), UV–Visible, photoluminescent (PL) spectroscopy, and cyclic voltammetry (CV). The formation of ultra-thin NWs was also been seen in the presence of the TiO2 coating. The ultra-thin and co-axial coating of each metal oxide and their hybrid form preserved the SPR of the Ag NWs and demonstrated photon harvesting from the 400–800 nm range. The band gap hybridization was confirmed by CV for the Ag@CuO/TiO2 design, which made the structure a reliable catalyst. Therefore, the material expresses excellent photocatalytic activities for carcinogenic textile dyes such as turquoise blue (TB), sapphire blue (SB), and methyl orange (MO), with and without the reagent H2O2. The hybrid form (i.e., Ag@CuO/TiO2) exhibited degradation within 6 min in the presence of H2O2. Additionally, the material showed antibacterial activities against various bacteria (Pseudomonas aeruginosa, Escherichia coli, Staphylococcus aureus, Bacillus subtilis, and Bacillus pumilus) when assayed using broth media. Therefore, the materials have established degrading and disinfection roles suitable for environmental perspectives. The role of coating with each metal oxide and their hybrid texture further improved the growth of Ag NWs. The preparatory route possibly ensued metal–metal oxide and metal–hybrid metal oxide Schottky junctions, which would expectedly transform it into a diode material for electronic applications.


  • Enhanced performance of graphene-based tin oxide hybrid nanostructures for ammonia gas detection

    by Abdul Shakoor, Javed Hussain, Sofia Siddique, Muhammad Arshad, Imtiaz Ahmad, Yasir A. Haleem, Areebah Abrar, Saqlain A. Shah


  • Validating superior electrochemical properties of Ti 3 C 2 MXene for supercapacitor applications through first-principles calculations

    by Sheheera Irfan, Yasir A. Haleem, Muhammad Usman, Naseeb Ahmad, Muhammad Arshad, Muhammad Imran Irshad, Muhammad Farooq Saleem, Muhammad Habib, Rashid Khan, Serdar Altin

    This work investigates the performance of Ti 3 C 2 MXene for supercapacitor applications and validated its efficacy as an electrode material utilizing first-principles calculations.


  • Open Access

    Synthesis and characterization of Ag@Ni co-axial nanocables and their fluorescent and catalytic properties

    by Sadia Sharif, Taiba Ahmed, Zahoor Ahmad, Muhammad Aziz Choudhary, Muhammad Arshad

    We report here a convenient, rapid one-pot synthesis of new metal–metal core–shell nanocomposites comprising silver nanowires (AgNWs) coated with nickel. The resulting AgNWs and nickel-coated silver nanocables average 60–80 nm in diameter were prepared by the polyol synthetic route. This method employed ethylene glycol as a reducing agent and polyvinylpyrrolidone as a capping agent. These nanomaterials are designated as AgNWs (0.1 M) and Ag@Ni (0.2 M), Ag@Ni (0.3 M), Ag@Ni (0.4 M), and Ag@Ni (0.5 M) nanocables based on the nickel content and were characterized by scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), UV–Visible (UV–Vis) spectroscopy, and photoluminescence (PL) spectroscopy. The morphology of each nanowire and nanocable was clarified using SEM, while EDX quantified the presence of Ni. XRD patterns confirmed the face-centered cubic structure of the nanomaterials. The Debye–Scherrer formula was applied to establish different characteristics such as crystallite size and lattice constant. Surface plasmon resonance was measured using UV−Vis spectroscopy and fluorescence of each product was determined by PL spectroscopy, respectively. Both the AgNWs and Ag@Ni nanocables catalyze the reduction of p -nitrophenol to p -aminophenol by sodium borohydride.


  • Open Access

    Growth and Characterization of Carbon Nanofibers Grown on Vertically Aligned InAs Nanowires via Chemical Vapour Deposition

    by Muhammad Arshad, Lucia Sorba, Petra Rudolf, Cinzia Cepek

    The integration of carbon nanostructures with semiconductor nanowires holds significant potential for energy-efficient integrated circuits. However, achieving precise control over the positioning and stability of these interconnections poses a major challenge. This study presents a method for the controlled growth of carbon nanofibers (CNFs) on vertically aligned indium arsenide (InAs) nanowires. The CNF/InAs hybrid structures, synthesized using chemical vapor deposition (CVD), were successfully produced without compromising the morphology of the pristine nanowires. Under optimized conditions, preferential growth of the carbon nanofibers in the direction perpendicular to the InAs nanowires was observed. Moreover, when the CVD process employed iron as a catalyst, an increased growth rate was achieved. With and without the presence of iron, carbon nanofibers nucleate preferentially on the top of the InAs nanowires, indicating a tip growth mechanism presumably catalysed by a gold-indium alloy that selectively forms in that region. These results represent a compelling example of controlled interconnections between adjacent InAs nanowires formed by carbon fibers.


  • High-Performance Ag-Doped Na0.67MnO2 Cathode: Operando XRD Study and Full-Cell Performance Analysis with Presodiated Anode

    by Burcu Kalyoncuoglu, Metin Ozgul, Sebahat Altundag, Emine Altin, Iqra Moeez, Kyung Yoon Chung, Muhammad Arshad, Mustafa Goktan Aydin, Tolga Depci, Serdar Altin, et al.


  • Open Access

    High-Performance Full Sodium Cells Based on MgO-Treated P2-Type Na0.67(Mn0.5Fe0.5)1−xCoxO2 Cathodes

    by Nermin Taskiran, Sebahat Altundag, Violeta Koleva, Emine Altin, Muhammad Arshad, Sevda Avci, Mehmet Nurullah Ates, Serdar Altin, Radostina Stoyanova

    Herein, we design a cathode material based on layered Na2/3(Mn1/2Fe1/2)O2 for practical application by combining the Co substitution and MgO treatment strategies. The oxides are prepared via solid-state reactions at 900 °C. The structure, morphology, and oxidation state of transition metal ions for Co-substituted and MgO-treated oxides are carefully examined via X-ray diffraction, IR and Raman spectroscopies, FESEM with EDX, specific surface area measurement, and XPS spectroscopy. The ability of oxides to store sodium reversibly is analyzed within a temperature range of 10 to 50 °C via CV experiments, galvanostatic measurements, and EIS, using half and full sodium ion cells. The changes in the local structure and oxidation state of transition metal ions during Na+ intercalation are monitored via operando XAS experiments. It is found that the Co substituents have a positive impact on the rate capability of layered oxides, while Mg additives lead to a strong increase in the capacity and an enhancement of the cycling stability. Thus, the highest capacity is obtained for 2 at.%-MgO-treated Na2/3(Mn1/2Fe1/2)0.9Co0.1O2 (175 mAh/g, with a capacity fade of 28% after 100 cycles). In comparison with Co substituents, the Mg treatment has a crucial role in the improvement of the lattice stability during the cycling process. The best electrode materials, with a chemical formula of 2 at.%-MgO treated Na2/3(Mn1/2Fe1/2)0.9Co0.1O2, were also used for the full cells design, with hard carbon as an anode. In the voltage window of 2–4 V, the capacity of the cells was obtained as 78 mAh/g and 51 mAh/g for applied current densities of 12 mA/g and 60 mA/g, respectively.