Sławomir Żak
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sławomir Żak has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Terese Rauckyte-Żak
Faculty of Chemical Technology and Engineering, University of Science and Technology, Bydgoszcz, Poland
5 shared publications - Wirginia Tomczak
Faculty of Chemical Technology and Engineering, Bydgoszcz University of Science and Technology, 3 Seminaryjna Street, 85-326 Bydgoszcz, Poland
4 shared publications Alfredas Laurinavičius
Department of Environmental Engineering, Vilnius Gediminas Technical University, Sauletekio al. 11, LT-10223 Vilnius-40, Lithuania
2 shared publications- Marek Gryta
Faculty of Chemical Technology and Engineering, West Pomeranian University of Technology in Szczecin, Piastów Ave. 17, 70-310 Szczecin, Poland
2 shared publications - Monika Daniluk
Faculty of Chemical Technology and Engineering, Bydgoszcz University of Science and Technology, 3 Seminaryjna Street, 85-326 Bydgoszcz, Poland
2 shared publications Adekunle Oloyede
Queensland University of Technology, School of Engineering Systems, GPO Box 2434, Brisbane, Q 4001, Australia
1 shared publication
Latest Publications
- 1 January 2026
- Published by Polish Chemical Society in Wiadomości Chemiczne
- Vol. 7-8, 1191-1220
https://ptchem.pl/storage/pages/July2026/Tomczak.pdf
Biotransformation enzymes, such as lipases, inulinases, and α-amylases, are widely used in the food and bioenergy industries, often using agro–industrial wastes as substrates. Because these enzymes are particularly sensitive to temperature, maintaining thermal stability is critical for industrial efficiency. This review focuses on the research of Miłek et al. regarding the determination the optimum temperature Topt, activation energy Ea, and deactivation energy Ed. The study analyzed the enzymatic hydrolysis of lipids by porcine pancreatic lipases; inulin by endoinulinases and exoinulinases; and starch by Bacillus α-amylases. The analysis considered enzyme deactivation kinetics, and optimum temperatures were determined to be in the range of 20–80 °C. Using the determined Topt and Ed values, deactivation rate constants kd were calculated for temperatures ranging from 30–110 °C. Therefore, controlling reaction conditions to minimize deactivation is essential for the design of stable biocatalysts and optimization of bioprocesses. The second chapter of the article focuses on the membrane bioreactor technology, which combines a reactor with a selective membrane process responsible for physical separation. Membrane bioreactors are a development and modernization of the activated sludge method, in which the biomass is responsible for pollutant biodegradation, and the membrane is responsible for contaminant removal and separation of the activated sludge from treated wastewater. They ensure complete biomass retention, high permeate quality, high separation efficiency with a small footprint and reactor volume, minimal maintenance, process flexibility, and easy scale-up. The third chapter is devoted to the issue of searching for methods for the preliminary treatment of post-industrial wastewater from the sectors of preparation and processing of natural raw materials of animal origin using the flotation method based on the company’s own patent.
- 1 January 2026
- Published by Polish Chemical Society in Wiadomości Chemiczne
- Vol. 7-8, 1191-1220
https://ptchem.pl/storage/pages/July2026/Tomczak.pdf
Biotransformation enzymes, such as lipases, inulinases, and α-amylases, are widely used in the food and bioenergy industries, often using agro–industrial wastes as substrates. Because these enzymes are particularly sensitive to temperature, maintaining thermal stability is critical for industrial efficiency. This review focuses on the research of Miłek et al. regarding the determination the optimum temperature Topt, activation energy Ea, and deactivation energy Ed. The study analyzed the enzymatic hydrolysis of lipids by porcine pancreatic lipases; inulin by endoinulinases and exoinulinases; and starch by Bacillus α-amylases. The analysis considered enzyme deactivation kinetics, and optimum temperatures were determined to be in the range of 20–80 °C. Using the determined Topt and Ed values, deactivation rate constants kd were calculated for temperatures ranging from 30–110 °C. Therefore, controlling reaction conditions to minimize deactivation is essential for the design of stable biocatalysts and optimization of bioprocesses. The second chapter of the article focuses on the membrane bioreactor technology, which combines a reactor with a selective membrane process responsible for physical separation. Membrane bioreactors are a development and modernization of the activated sludge method, in which the biomass is responsible for pollutant biodegradation, and the membrane is responsible for contaminant removal and separation of the activated sludge from treated wastewater. They ensure complete biomass retention, high permeate quality, high separation efficiency with a small footprint and reactor volume, minimal maintenance, process flexibility, and easy scale-up. The third chapter is devoted to the issue of searching for methods for the preliminary treatment of post-industrial wastewater from the sectors of preparation and processing of natural raw materials of animal origin using the flotation method based on the company’s own patent.
- Open Access
The Use of Crude Glycerol as a Co-Substrate for Anaerobic Digestion
One of the most interesting applications of crude glycerol (CG) is its use for biogas production via the anaerobic co-digestion (AcoD) process. The main aim of the current study was to provide a comprehensive review on the performance of the AcoD of CG mixed with various substrates. For this purpose, analyses were performed for studies available in the literature wherein one-stage experiments were conducted. To the best of the authors’ knowledge, the present study is the first one which demonstrates an analysis of the main parameters of CG and substrates (e.g., animal manure, sewage sludge, cattle manure and food waste) used for AcoD. Moreover, a detailed analysis of the impact of selected parameters on AcoD performance was carried out. It is demonstrated that the values of key parameters characterizing the CG used for AcoD were within wide ranges. This can be explained by the fact that the composition of CG depends on many factors; for instance, these include the source of oil used for biodiesel production, processing technology, the ratio of reactants, the type of catalyst and the procedure applied. Moreover, performing a literature review allowed us to demonstrate that adding CG to feedstock caused the enhancement of process performance compared to results obtained for mono-digestion. Additionally, it was shown that, in general, increasing the concentration of CG in feedstock led to improvement of the biogas yield; however, a potential inhibitory effect should be considered. Analysis of data available in the literature allowed us to indicate that for most of the experiments performed, a methane (CH4) content in biogas higher than 60% was obtained for CG content in feedstock up to 8% v/v. In addition, it is demonstrated that in order to evaluate the performance of AcoD performed under thermophilic conditions, more studies are required. Finally, it should be pointed out that the present study provides considerable insight into the management of CG.
Open AccessThe Use of Crude Glycerol as a Co-Substrate for Anaerobic Digestion
One of the most interesting applications of crude glycerol (CG) is its use for biogas production via the anaerobic co-digestion (AcoD) process. The main aim of the current study was to provide a comprehensive review on the performance of the AcoD of CG mixed with various substrates. For this purpose, analyses were performed for studies available in the literature wherein one-stage experiments were conducted. To the best of the authors’ knowledge, the present study is the first one which demonstrates an analysis of the main parameters of CG and substrates (e.g., animal manure, sewage sludge, cattle manure and food waste) used for AcoD. Moreover, a detailed analysis of the impact of selected parameters on AcoD performance was carried out. It is demonstrated that the values of key parameters characterizing the CG used for AcoD were within wide ranges. This can be explained by the fact that the composition of CG depends on many factors; for instance, these include the source of oil used for biodiesel production, processing technology, the ratio of reactants, the type of catalyst and the procedure applied. Moreover, performing a literature review allowed us to demonstrate that adding CG to feedstock caused the enhancement of process performance compared to results obtained for mono-digestion. Additionally, it was shown that, in general, increasing the concentration of CG in feedstock led to improvement of the biogas yield; however, a potential inhibitory effect should be considered. Analysis of data available in the literature allowed us to indicate that for most of the experiments performed, a methane (CH4) content in biogas higher than 60% was obtained for CG content in feedstock up to 8% v/v. In addition, it is demonstrated that in order to evaluate the performance of AcoD performed under thermophilic conditions, more studies are required. Finally, it should be pointed out that the present study provides considerable insight into the management of CG.
- Open Access
Application of Industrial NF and RO Membranes in Separation of Post-Fermentation Solutions: Preliminary Study
The focus of this work was to perform a preliminary study on the suitability of commercially available nanofiltration (NF) and reverse osmosis (RO) membranes for the separation of 1,3-propanediol (1,3-PD) post-fermentation solutions. The experiments were conducted with the use of AFC30 and AFC99 (PCI Membrane System Inc., Milford, OH, USA) as well as BW30 membranes (Dow FilmTec Co., Midland, MI, USA) and various feed solutions: selected compounds of fermentation broths, and synthetic and real fermentation broths. Firstly, it was found that for pure water, the AFC30 membrane was characterized by the highest performance. It clearly indicated that the membrane is the most open membrane and is characterized by a more porous structure. In turn, the lowest flux was noted for the AFC99 membrane. Studies performed with the use of synthetic broth found that for the BW30 membrane, the order in which the rejection coefficient (R) was obtained was glycerol~lactic acid > 1,3-propanediol > acetic acid. It clearly confirmed that the R increased with the molecular weight (MW) of the solution compounds. With regard to ions, it was found that SO42− and PO43− is characterized by higher R than Cl− and NO3− ions. Multivalent ions are characterized by higher charge density, hydrated radius, hydration energy and MW. Finally, experiments performed with the use of the AFC30 membrane and real broths showed that the membrane ensured almost complete separation of 1,3-PD. With regard to organic acid, the separation performance was as follows: succinic acid > lactic acid > butyric acid > acetic acid > formic acid. It has been documented that the AFC30 membrane can be successfully used to concentrate the following ions: SO42−, PO43−, NO3− and Na+. Hence, most of the medium used for the fermentation process was retained by the membrane and may be reused, which is crucial for the scaling up of the process and reducing the total technology cost. With regard to the obtained permeate, it can be subsequently purified by other methods, such as distillation or ion exchange. For further development of the tested process, determining the retention degree for 1,3-PD and other solutes during long-term separation of real broth is necessary.
Open AccessApplication of Industrial NF and RO Membranes in Separation of Post-Fermentation Solutions: Preliminary Study
The focus of this work was to perform a preliminary study on the suitability of commercially available nanofiltration (NF) and reverse osmosis (RO) membranes for the separation of 1,3-propanediol (1,3-PD) post-fermentation solutions. The experiments were conducted with the use of AFC30 and AFC99 (PCI Membrane System Inc., Milford, OH, USA) as well as BW30 membranes (Dow FilmTec Co., Midland, MI, USA) and various feed solutions: selected compounds of fermentation broths, and synthetic and real fermentation broths. Firstly, it was found that for pure water, the AFC30 membrane was characterized by the highest performance. It clearly indicated that the membrane is the most open membrane and is characterized by a more porous structure. In turn, the lowest flux was noted for the AFC99 membrane. Studies performed with the use of synthetic broth found that for the BW30 membrane, the order in which the rejection coefficient (R) was obtained was glycerol~lactic acid > 1,3-propanediol > acetic acid. It clearly confirmed that the R increased with the molecular weight (MW) of the solution compounds. With regard to ions, it was found that SO42− and PO43− is characterized by higher R than Cl− and NO3− ions. Multivalent ions are characterized by higher charge density, hydrated radius, hydration energy and MW. Finally, experiments performed with the use of the AFC30 membrane and real broths showed that the membrane ensured almost complete separation of 1,3-PD. With regard to organic acid, the separation performance was as follows: succinic acid > lactic acid > butyric acid > acetic acid > formic acid. It has been documented that the AFC30 membrane can be successfully used to concentrate the following ions: SO42−, PO43−, NO3− and Na+. Hence, most of the medium used for the fermentation process was retained by the membrane and may be reused, which is crucial for the scaling up of the process and reducing the total technology cost. With regard to the obtained permeate, it can be subsequently purified by other methods, such as distillation or ion exchange. For further development of the tested process, determining the retention degree for 1,3-PD and other solutes during long-term separation of real broth is necessary.
- 21 October 2024
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEMYSŁ CHEMICZNY
- Vol. 1 (10) , 45-52
Wstępne oczyszczanie ścieków z wodnego mycia pojemników po olejach roślinnych
Wydawnictwo SIGMA-NOT wydaje czasopisma fachowe informujące swoich czytelników o najnowszych osiągnięciach naukowych i nowoczesnych rozwiązaniach technicznych w Polsce i na świecie, popularyzuje problemy techniczne oraz poszerza wiedzę i kulturę techniczną.
- 21 October 2024
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEMYSŁ CHEMICZNY
- Vol. 1 (10) , 45-52
Wstępne oczyszczanie ścieków z wodnego mycia pojemników po olejach roślinnych
Wydawnictwo SIGMA-NOT wydaje czasopisma fachowe informujące swoich czytelników o najnowszych osiągnięciach naukowych i nowoczesnych rozwiązaniach technicznych w Polsce i na świecie, popularyzuje problemy techniczne oraz poszerza wiedzę i kulturę techniczną.
- Open Access
Biogas Upgrading Using a Single-Membrane System: A Review
In recent years, the use of biogas as a natural gas substitute has gained great attention. Typically, in addition to methane (CH4), biogas contains carbon dioxide (CO2), as well as small amounts of impurities, e.g., hydrogen sulfide (H2S), nitrogen (N2), oxygen (O2) and volatile organic compounds (VOCs). One of the latest trends in biogas purification is the application of membrane processes. However, literature reports are ambiguous regarding the specific requirement for biogas pretreatment prior to its upgrading using membranes. Therefore, the main aim of the present study was to comprehensively examine and discuss the most recent achievements in the use of single-membrane separation units for biogas upgrading. Performing a literature review allowed to indicate that, in recent years, considerable progress has been made on the use of polymeric membranes for this purpose. For instance, it has been documented that the application of thin-film composite (TFC) membranes with a swollen polyamide (PA) layer ensures the successful upgrading of raw biogas and eliminates the need for its pretreatment. The importance of the performed literature review is the inference drawn that biogas enrichment performed in a single step allows to obtain upgraded biogas that could be employed for household uses. Nevertheless, this solution may not be sufficient for obtaining high-purity gas at high recovery efficiency. Hence, in order to obtain biogas that could be used for applications designed for natural gas, a membrane cascade may be required. Moreover, it has been documented that a significant number of experimental studies have been focused on the upgrading of synthetic biogas; meanwhile, the data on the raw biogas are very limited. In addition, it has been noted that, although ceramic membranes demonstrate several advantages, experimental studies on their applications in single-membrane systems have been neglected. Summarizing the literature data, it can be concluded that, in order to thoroughly evaluate the presented issue, the long-term experimental studies on the upgrading of raw biogas with the use of polymeric and ceramic membranes in pilot-scale systems are required. The presented literature review has practical implications as it would be beneficial in supporting the development of membrane processes used for biogas upgrading.
Open AccessBiogas Upgrading Using a Single-Membrane System: A Review
In recent years, the use of biogas as a natural gas substitute has gained great attention. Typically, in addition to methane (CH4), biogas contains carbon dioxide (CO2), as well as small amounts of impurities, e.g., hydrogen sulfide (H2S), nitrogen (N2), oxygen (O2) and volatile organic compounds (VOCs). One of the latest trends in biogas purification is the application of membrane processes. However, literature reports are ambiguous regarding the specific requirement for biogas pretreatment prior to its upgrading using membranes. Therefore, the main aim of the present study was to comprehensively examine and discuss the most recent achievements in the use of single-membrane separation units for biogas upgrading. Performing a literature review allowed to indicate that, in recent years, considerable progress has been made on the use of polymeric membranes for this purpose. For instance, it has been documented that the application of thin-film composite (TFC) membranes with a swollen polyamide (PA) layer ensures the successful upgrading of raw biogas and eliminates the need for its pretreatment. The importance of the performed literature review is the inference drawn that biogas enrichment performed in a single step allows to obtain upgraded biogas that could be employed for household uses. Nevertheless, this solution may not be sufficient for obtaining high-purity gas at high recovery efficiency. Hence, in order to obtain biogas that could be used for applications designed for natural gas, a membrane cascade may be required. Moreover, it has been documented that a significant number of experimental studies have been focused on the upgrading of synthetic biogas; meanwhile, the data on the raw biogas are very limited. In addition, it has been noted that, although ceramic membranes demonstrate several advantages, experimental studies on their applications in single-membrane systems have been neglected. Summarizing the literature data, it can be concluded that, in order to thoroughly evaluate the presented issue, the long-term experimental studies on the upgrading of raw biogas with the use of polymeric and ceramic membranes in pilot-scale systems are required. The presented literature review has practical implications as it would be beneficial in supporting the development of membrane processes used for biogas upgrading.
- 28 December 2023
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEMYSŁ CHEMICZNY
- Vol. 1 (12) , 118-124
Flotacyjne oczyszczanie wstępne ścieków z przetwórstwa mięsnego w mobilnym zestawie badawczym
W przepływowej instalacji doświadczalnej wyznaczono warunki usuwania tłuszczów i ładunków zanieczyszczeń metodami flotacyjnymi ze ścieków poprodukcyjnych z zakładu przetwórstwa mięsa wieprzowego. Skuteczność flotacji ścieków surowych (SS) w temp. 20±3°C porównano trzema metodami: (a) z zastosowaniem zdyspergowanego powietrza (FDP), (b) wg własnego wynalazku ze wspomaganiem 30-proc. H2 O2 (Ox) lub z dodatkowym zastosowaniem (c) mleka wapiennego (MW) na bazie Ca(OH)2 lub CaO2 . Najskuteczniejszą metodą okazała się metoda wspomagana H2 O2 z wykorzystaniem Ca(OH)2 , która pozwoliła uzyskać klarowny odciek i poziomy eliminacji zanieczyszczeń wg wartości wskaźników: ekstrakt eterowy i zawiesiny ogółem > 99%, BZT5 > 40%, ChZT > 55%, P ogółem > 85%, NKjh > 35% i Cl całkowity > 90%.
- 28 December 2023
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEMYSŁ CHEMICZNY
- Vol. 1 (12) , 118-124
Flotacyjne oczyszczanie wstępne ścieków z przetwórstwa mięsnego w mobilnym zestawie badawczym
W przepływowej instalacji doświadczalnej wyznaczono warunki usuwania tłuszczów i ładunków zanieczyszczeń metodami flotacyjnymi ze ścieków poprodukcyjnych z zakładu przetwórstwa mięsa wieprzowego. Skuteczność flotacji ścieków surowych (SS) w temp. 20±3°C porównano trzema metodami: (a) z zastosowaniem zdyspergowanego powietrza (FDP), (b) wg własnego wynalazku ze wspomaganiem 30-proc. H2 O2 (Ox) lub z dodatkowym zastosowaniem (c) mleka wapiennego (MW) na bazie Ca(OH)2 lub CaO2 . Najskuteczniejszą metodą okazała się metoda wspomagana H2 O2 z wykorzystaniem Ca(OH)2 , która pozwoliła uzyskać klarowny odciek i poziomy eliminacji zanieczyszczeń wg wartości wskaźników: ekstrakt eterowy i zawiesiny ogółem > 99%, BZT5 > 40%, ChZT > 55%, P ogółem > 85%, NKjh > 35% i Cl całkowity > 90%.
- 19 December 2022
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEMYSŁ CHEMICZNY
- Vol. 1 (12) , 68-73
Technologia oczyszczania ścieków z przemysłowej produkcji masła. Cz. I. Badania z wykorzystaniem mobilnego zestawu w powiększonej skali
W przepływowej instalacji doświadczalnej wyznaczono warunki usuwania tłuszczu, jak również pozostałych ładunków zanieczyszczeń metodami koagulacyjnymi z końcową separacją faz zdyspergowanych metodami flotacyjnymi ze ścieków z produkcji masła. W temp. 30±3°C porównano skuteczność flotacji: a) zdyspergowanym powietrzem (FDP), b) wg własnego wynalazku ze wspomaganiem 30-proc. nadtlenkiem wodoru (Ox) lub z dodatkowym zastosowaniem reagentów oraz c) za pomocą PAX® 18 albo PAX® XL 60. Metodami a lub b uzyskiwano flotaty zawierające tłuszcz na poziomie odpowiednio 7–16 lub 9–21%. Metodą c uzyskano stopień eliminacji zanieczyszczeń określony parametrami: EE i ZO (ekstrakt eterowy i zawiesiny ogółem) > 99%, BZT5 i ChZT (biochemiczne i chemiczne zapotrzebowanie na tlen) > 40% i > 60%, P (fosfor ogółem) > 85% i NKjh (azot ogółem Kjeldahla) < 35%.
- 19 December 2022
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEMYSŁ CHEMICZNY
- Vol. 1 (12) , 68-73
Technologia oczyszczania ścieków z przemysłowej produkcji masła. Cz. I. Badania z wykorzystaniem mobilnego zestawu w powiększonej skali
W przepływowej instalacji doświadczalnej wyznaczono warunki usuwania tłuszczu, jak również pozostałych ładunków zanieczyszczeń metodami koagulacyjnymi z końcową separacją faz zdyspergowanych metodami flotacyjnymi ze ścieków z produkcji masła. W temp. 30±3°C porównano skuteczność flotacji: a) zdyspergowanym powietrzem (FDP), b) wg własnego wynalazku ze wspomaganiem 30-proc. nadtlenkiem wodoru (Ox) lub z dodatkowym zastosowaniem reagentów oraz c) za pomocą PAX® 18 albo PAX® XL 60. Metodami a lub b uzyskiwano flotaty zawierające tłuszcz na poziomie odpowiednio 7–16 lub 9–21%. Metodą c uzyskano stopień eliminacji zanieczyszczeń określony parametrami: EE i ZO (ekstrakt eterowy i zawiesiny ogółem) > 99%, BZT5 i ChZT (biochemiczne i chemiczne zapotrzebowanie na tlen) > 40% i > 60%, P (fosfor ogółem) > 85% i NKjh (azot ogółem Kjeldahla) < 35%.
- 19 December 2022
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEMYSŁ CHEMICZNY
- Vol. 1 (12) , 74-79
Technologia oczyszczania ścieków z przemysłowej produkcji masła. Cz. II. Instalacja w pełnej skali przemysłowej i specyfika uwarunkowań eksploatacyjnych
Przyjęta konfiguracja instalacji o przepustowości do 450 m3/dobę i zastosowane metody obróbki ścieków z produkcji masła pozwalały na oddzielne zagęszczanie oraz wydzielanie frakcji tłuszczowych na pierwszym stopniu, a następnie wstępne oczyszczanie ścieków na stopniu drugim. Skuteczność usuwania ładunków zanieczyszczeń określono na podstawie zmian parametrów wskaźnikowych, które po pierwszym i łącznie po drugim etapie oczyszczania wynosiły odpowiednio (%): ekstrakt eterowy 60–76 i > 98, zawiesina ogółem 50–71 i > 97, BZT5 28–39 i 38–46, ChZT 38–52 i 56–64, NKjh (azot ogólny Kjeldahla) 11–24 i 19–30 oraz P ogółem 4–8 i 77–85. Flotaty otrzymane w pierwszym etapie charakteryzowały się zawartością tłuszczu 11–23%.
- 19 December 2022
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEMYSŁ CHEMICZNY
- Vol. 1 (12) , 74-79
Technologia oczyszczania ścieków z przemysłowej produkcji masła. Cz. II. Instalacja w pełnej skali przemysłowej i specyfika uwarunkowań eksploatacyjnych
Przyjęta konfiguracja instalacji o przepustowości do 450 m3/dobę i zastosowane metody obróbki ścieków z produkcji masła pozwalały na oddzielne zagęszczanie oraz wydzielanie frakcji tłuszczowych na pierwszym stopniu, a następnie wstępne oczyszczanie ścieków na stopniu drugim. Skuteczność usuwania ładunków zanieczyszczeń określono na podstawie zmian parametrów wskaźnikowych, które po pierwszym i łącznie po drugim etapie oczyszczania wynosiły odpowiednio (%): ekstrakt eterowy 60–76 i > 98, zawiesina ogółem 50–71 i > 97, BZT5 28–39 i 38–46, ChZT 38–52 i 56–64, NKjh (azot ogólny Kjeldahla) 11–24 i 19–30 oraz P ogółem 4–8 i 77–85. Flotaty otrzymane w pierwszym etapie charakteryzowały się zawartością tłuszczu 11–23%.
- 17 December 2021
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEMYSŁ CHEMICZNY
- Vol. 1 (12) , 43-49
Wstępne oczyszczanie ścieków z produkcji karmy dla zwierząt mięsożernych za pomocą flotacji wspomaganej nadtlenkiem wodoru
W warunkach przepływowych w doświadczalnej instalacji o przepustowości do 1,0 m3/h przeprowadzono w temp. 15±3°C wstępne oczyszczanie ścieków powstających z przemysłowej produkcji karmy dla zwierząt mięsożernych: mokrej dla i) norek, ii) lisów lub suchej dla iii) psów. Porównano skuteczność usuwania ładunków zanieczyszczeń z zastosowaniem koagulacji 5,0-proc. mlekiem wapiennym (MW) lub Na2Al2O4 (SAX® 18) oraz metod flotacyjnych dyspergowanym powietrzem lub wg własnego wynalazku ze wspomaganiem 30,0-proc. H2O2. Przy 20-proc. poziomie recyrkulacji ścieków wstępnie oczyszczonych i nasycanych powietrzem pod ciśnieniem 400 kPa, a także z końcową flotacją wg własnego wynalazku uzyskiwano zmniejszenie ładunków zanieczyszczeń dla ekstraktu eterowego i zawiesin ogółem powyżej 99%, zmniejszenie wartości parametrów ChZT i BZT o odpowiednio ponad 50 i 35%, azotu ogółem N < 20%, a fosforu P > 80%.
- 17 December 2021
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEMYSŁ CHEMICZNY
- Vol. 1 (12) , 43-49
Wstępne oczyszczanie ścieków z produkcji karmy dla zwierząt mięsożernych za pomocą flotacji wspomaganej nadtlenkiem wodoru
W warunkach przepływowych w doświadczalnej instalacji o przepustowości do 1,0 m3/h przeprowadzono w temp. 15±3°C wstępne oczyszczanie ścieków powstających z przemysłowej produkcji karmy dla zwierząt mięsożernych: mokrej dla i) norek, ii) lisów lub suchej dla iii) psów. Porównano skuteczność usuwania ładunków zanieczyszczeń z zastosowaniem koagulacji 5,0-proc. mlekiem wapiennym (MW) lub Na2Al2O4 (SAX® 18) oraz metod flotacyjnych dyspergowanym powietrzem lub wg własnego wynalazku ze wspomaganiem 30,0-proc. H2O2. Przy 20-proc. poziomie recyrkulacji ścieków wstępnie oczyszczonych i nasycanych powietrzem pod ciśnieniem 400 kPa, a także z końcową flotacją wg własnego wynalazku uzyskiwano zmniejszenie ładunków zanieczyszczeń dla ekstraktu eterowego i zawiesin ogółem powyżej 99%, zmniejszenie wartości parametrów ChZT i BZT o odpowiednio ponad 50 i 35%, azotu ogółem N < 20%, a fosforu P > 80%.
- 10 September 2021
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEMYSŁ CHEMICZNY
- Vol. 1 (9) , 105-110
Oczyszczanie ścieków powstających w procesie produkcji gryzaków dla psów
Przeprowadzono badania nad możliwością wstępnego oczyszczania ścieków surowych (SS), które powstają w procesach przetwórczych: (i) wołowego mięsa z kością, (ii) surowej dwoiny wołowej, (iii) uszu wieprzowych, oraz bielonych perhydrolem: (iv) nosków wieprzowych, (v) nóżek drobiowych, celem wytwarzania naturalnych gryzaków dla psów. W warunkach przepływowych, przy natężeniach objętościowych SS 0,7−0,9 m3/h w instalacji doświadczalnej porównano skuteczność flotacyjnego usuwania ładunków zanieczyszczeń metodami: a) zdyspergowanym powietrzem (FDP), b) według własnego wynalazku ze wspomaganiem 30-proc. nadtlenkiem wodoru (Ox), c) z zastosowaniem 5-proc. mleka wapiennego i metody Ox. Próby oczyszczania metodami a–c prowadzono w temp. > 55°C powstawania SS, jak również na ściekach schłodzonych do temp. < 40°C za pomocą wymienników ciepła. Najwyższe poziomy usuwania zanieczyszczeń uzyskiwano metodą c z SS o temp. < 40°C i wyniosły one dla EE (ekstrakt eterowy) > 99%, ZO (zawiesiny ogółem) > 97%, BZT5 i ChZT (biologiczne i chemiczne zapotrzebowanie na tlen) > 40% i > 50% oraz N i P (azot ogółem i fosfor ogółem) < 20% i > 70%.
- 10 September 2021
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEMYSŁ CHEMICZNY
- Vol. 1 (9) , 105-110
Oczyszczanie ścieków powstających w procesie produkcji gryzaków dla psów
Przeprowadzono badania nad możliwością wstępnego oczyszczania ścieków surowych (SS), które powstają w procesach przetwórczych: (i) wołowego mięsa z kością, (ii) surowej dwoiny wołowej, (iii) uszu wieprzowych, oraz bielonych perhydrolem: (iv) nosków wieprzowych, (v) nóżek drobiowych, celem wytwarzania naturalnych gryzaków dla psów. W warunkach przepływowych, przy natężeniach objętościowych SS 0,7−0,9 m3/h w instalacji doświadczalnej porównano skuteczność flotacyjnego usuwania ładunków zanieczyszczeń metodami: a) zdyspergowanym powietrzem (FDP), b) według własnego wynalazku ze wspomaganiem 30-proc. nadtlenkiem wodoru (Ox), c) z zastosowaniem 5-proc. mleka wapiennego i metody Ox. Próby oczyszczania metodami a–c prowadzono w temp. > 55°C powstawania SS, jak również na ściekach schłodzonych do temp. < 40°C za pomocą wymienników ciepła. Najwyższe poziomy usuwania zanieczyszczeń uzyskiwano metodą c z SS o temp. < 40°C i wyniosły one dla EE (ekstrakt eterowy) > 99%, ZO (zawiesiny ogółem) > 97%, BZT5 i ChZT (biologiczne i chemiczne zapotrzebowanie na tlen) > 40% i > 50% oraz N i P (azot ogółem i fosfor ogółem) < 20% i > 70%.