Thomas Dunker
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Thomas Dunker has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Erik Trostmann
Fraunhofer Institute for Factory Operation and Automation IFF, Magdeburg, Germany
3 shared publications - Rui Han
Fraunhofer Institute for Factory Operation and Automation IFF, Magdeburg, Germany
2 shared publications - Zhigang Xu
Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110016, China
2 shared publications - Anika Tauschensky1 shared publication
E Westkämper
Fraunhofer Institute of Manufacturing Engineering and Automation Nobelstrasse 12 70569 Stuttgart Germany
1 shared publicationEngelbert Westkämper
1 shared publication
Latest Publications
- 16 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (23) , 39677-39689
Research on New Mathematical Model Aix=Ybi for Hand-to-Eye Calibration and Application Scenery of This Model Based on iGPS
Hand to eye calibration is one of the most important steps to realize high flexibility and digitization of industry. In this paper, base on the research background of improving the degree of automation and flexibility in the field of aircraft fuselage inspection and detection, the hand to eye calibration under large size of operating volume is firstly studied based on indoor global positioning system (iGPS). A new calibration mathematical model A i x = Yb i is firstly proposed under this research background, and the solution of this model is given based on the orthogonal matrix property and multi-objective optimization algorithm includes the Particle Swarm Algorithm (PSO) and Difference Evolutionary Algorithm (DE). Verification experiments have shown that the method can achieve 3D camera calibration with an average error around 0.1021 mm in a large workspace. Thus, it is proved through experiments that this method can realize high-precision and high-robustness calibration of 3D camera, tool center point (TCP) coordinate, and tool axis vector in a large scale of operating environment.
- 16 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (23) , 39677-39689
Research on New Mathematical Model Aix=Ybi for Hand-to-Eye Calibration and Application Scenery of This Model Based on iGPS
Hand to eye calibration is one of the most important steps to realize high flexibility and digitization of industry. In this paper, base on the research background of improving the degree of automation and flexibility in the field of aircraft fuselage inspection and detection, the hand to eye calibration under large size of operating volume is firstly studied based on indoor global positioning system (iGPS). A new calibration mathematical model A i x = Yb i is firstly proposed under this research background, and the solution of this model is given based on the orthogonal matrix property and multi-objective optimization algorithm includes the Particle Swarm Algorithm (PSO) and Difference Evolutionary Algorithm (DE). Verification experiments have shown that the method can achieve 3D camera calibration with an average error around 0.1021 mm in a large workspace. Thus, it is proved through experiments that this method can realize high-precision and high-robustness calibration of 3D camera, tool center point (TCP) coordinate, and tool axis vector in a large scale of operating environment.
- Open Access
Calibration Methods for Large-Scale and High-Precision Globalization of Local Point Cloud Data Based on iGPS
The point cloud is one of the measurement results of local measurement and is widely used because of its high measurement accuracy, high data density, and low environmental impact. However, since point cloud data from a single measurement are generally small in spatial extent, it is necessary to accurately globalize the local point cloud to measure large components. In this paper, the method of using an iGPS (indoor Global Positioning System) as an external measurement device to realize high-accuracy globalization of local point cloud data is proposed. Two calibration models are also discussed for different application scenarios. Verification experiments prove that the average calibration errors of these two calibration models are 0.12 mm and 0.17 mm, respectively. The proposed method can maintain calibration precision in a large spatial range (about 10 m × 10 m × 5 m), which is of high value for engineering applications.
Open AccessCalibration Methods for Large-Scale and High-Precision Globalization of Local Point Cloud Data Based on iGPS
The point cloud is one of the measurement results of local measurement and is widely used because of its high measurement accuracy, high data density, and low environmental impact. However, since point cloud data from a single measurement are generally small in spatial extent, it is necessary to accurately globalize the local point cloud to measure large components. In this paper, the method of using an iGPS (indoor Global Positioning System) as an external measurement device to realize high-accuracy globalization of local point cloud data is proposed. Two calibration models are also discussed for different application scenarios. Verification experiments prove that the average calibration errors of these two calibration models are 0.12 mm and 0.17 mm, respectively. The proposed method can maintain calibration precision in a large spatial range (about 10 m × 10 m × 5 m), which is of high value for engineering applications.
- 4 January 2024
- Published by Ubiquity Press, Ltd. in Journal of Open Archaeology Data
- Vol. 12, 1-6
Medieval Coins of Three Different Types and of Various States of Preservation
- 4 January 2024
- Published by Ubiquity Press, Ltd. in Journal of Open Archaeology Data
- Vol. 12, 1-6
Medieval Coins of Three Different Types and of Various States of Preservation
- 31 January 2014
- Published by Walter de Gruyter GmbH in TM - Technisches Messen
- Vol. 81 (1) , 8-15
Calibration of an infrared 3d scanner
The AiMESS Services GmbH has developed a new infrared fringe projection system, which allows 3D measurements on specular surfaces and many materials, which are transparent for the visible spectrum of light. This article presents a model and a calibration method for this system and explains why existing models for fringe projection systems did not fit.
- 31 January 2014
- Published by Walter de Gruyter GmbH in TM - Technisches Messen
- Vol. 81 (1) , 8-15
Calibration of an infrared 3d scanner
The AiMESS Services GmbH has developed a new infrared fringe projection system, which allows 3D measurements on specular surfaces and many materials, which are transparent for the visible spectrum of light. This article presents a model and a calibration method for this system and explains why existing models for fringe projection systems did not fit.
- 1 August 2005
- Published by Elsevier in European Journal of Operational Research
- Vol. 165 (1) , 55-69
Combining evolutionary computation and dynamic programming for solving a dynamic facility layout problem
- 1 August 2005
- Published by Elsevier in European Journal of Operational Research
- Vol. 165 (1) , 55-69
Combining evolutionary computation and dynamic programming for solving a dynamic facility layout problem
- 1 January 2003
- Published by Taylor & Francis in International Journal of Production Research
- Vol. 41 (15) , 3479-3500
A coevolutionary algorithm for a facility layout problem
This paper presents a coevolutionary approach to the numerical optimization of large facility layouts. Our work is based on a mixed integer model for the layout constraints and objectives, which improves formulations found in the literature. Nevertheless, layouts with more than seven departments are difficult to solve. One way out is to apply genetic algorithms - searching systematically for solutions but without guarantee of finding an optimum. In this paper we suggest some improved mutation and cross-over operators. Yet, with increasing number of departments also genetic algorithms take very long. In this case we propose to use additional structures given by qualitative or quantitative reasoning. Clustering the departments into groups we allow each group ('species') to evolve (genetic algorithm) in a separate area while position and size of these areas ('environment') undergo an evolution, too. Numerical experiments verify this coevolutionary approach
- 1 January 2003
- Published by Taylor & Francis in International Journal of Production Research
- Vol. 41 (15) , 3479-3500
A coevolutionary algorithm for a facility layout problem
This paper presents a coevolutionary approach to the numerical optimization of large facility layouts. Our work is based on a mixed integer model for the layout constraints and objectives, which improves formulations found in the literature. Nevertheless, layouts with more than seven departments are difficult to solve. One way out is to apply genetic algorithms - searching systematically for solutions but without guarantee of finding an optimum. In this paper we suggest some improved mutation and cross-over operators. Yet, with increasing number of departments also genetic algorithms take very long. In this case we propose to use additional structures given by qualitative or quantitative reasoning. Clustering the departments into groups we allow each group ('species') to evolve (genetic algorithm) in a separate area while position and size of these areas ('environment') undergo an evolution, too. Numerical experiments verify this coevolutionary approach
- 1 April 2000
- Published by Springer Nature in Journal of Theoretical Probability
- Vol. 13 (2) , 357-382
Estimates for the Small Ball Probabilities of the Fractional Brownian Sheet
- 1 April 2000
- Published by Springer Nature in Journal of Theoretical Probability
- Vol. 13 (2) , 357-382
Estimates for the Small Ball Probabilities of the Fractional Brownian Sheet
- 1 February 2000
- Published by Elsevier in Statistics & Probability Letters
- Vol. 46 (3) , 211-216
Small ball probabilities for integrals of weighted Brownian motion
- 1 February 2000
- Published by Elsevier in Statistics & Probability Letters
- Vol. 46 (3) , 211-216
Small ball probabilities for integrals of weighted Brownian motion
- 1 November 1999
- Published by Elsevier in Journal of Approximation Theory
- Vol. 101 (1) , 63-77
Metric Entropy of Integration Operators and Small Ball Probabilities for the Brownian Sheet
- 1 November 1999
- Published by Elsevier in Journal of Approximation Theory
- Vol. 101 (1) , 63-77
Metric Entropy of Integration Operators and Small Ball Probabilities for the Brownian Sheet