Hessam Ghasemnejad
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Hessam Ghasemnejad has a total of 71 co-authors. Here are the top co-authors by number of shared publications:
A. Rabiee
Department of Aerospace Engineering, Centre for Structures, Assembly and Intelligent Automation, Cranfield University, Bedford, UK
2 shared publications- A. Rabiee2 shared publications
B. Arachchige
2 shared publications- Buddhi Arachchige
Centre for Structures, Assembly and Intelligence Automation, Cranfield University, Bedford MK430AL, UK
2 shared publications J. W. Watson
Cranfield Impact Centre (CIC), Cranfield, UK
2 shared publicationsS. Srimanosaowapak
National Metal and Materials Technology Center (MTEC), Pathum Thani, Thailand
2 shared publications
Latest Publications
- Open Access
- 3 October 2026
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 10 (10) , 401
Sustainable Waste-Filled Portable Crash Boxes for Crashworthiness Performance Improvement of Road Service Vehicles
The automotive industry prioritises passive safety, emphasising the development of safer cars through sustainable designs rather than performance alone. The objective of this study is to investigate the development and implementation of waste-filled portable crash boxes to improve the crashworthiness performance of road service vehicles using sustainable materials such as beverage cans. Experimental studies were conducted to determine material properties; consequently, quasi-static and impact tests were performed to evaluate the crashworthiness performance of sustainable absorbers. Various finite element models were developed in LS-DYNA to assess the crashworthiness of structures, enabling the identification of potential improvements to crash components for road safety vehicles under real-world conditions. The outcomes of this investigation aim to demonstrate the feasibility of repurposing recycled aluminium beverage cans as sustainable, low-cost, and efficient energy absorbers to enhance road safety and vehicle crash protection. Finally, the crashworthiness parameters, such as specific energy absorption (SEA) and mean crush force (Fm), are compared between experimental and numerical results with errors of less than 10%.
- 3 October 2026
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 10 (10) , 401
Open AccessSustainable Waste-Filled Portable Crash Boxes for Crashworthiness Performance Improvement of Road Service Vehicles
The automotive industry prioritises passive safety, emphasising the development of safer cars through sustainable designs rather than performance alone. The objective of this study is to investigate the development and implementation of waste-filled portable crash boxes to improve the crashworthiness performance of road service vehicles using sustainable materials such as beverage cans. Experimental studies were conducted to determine material properties; consequently, quasi-static and impact tests were performed to evaluate the crashworthiness performance of sustainable absorbers. Various finite element models were developed in LS-DYNA to assess the crashworthiness of structures, enabling the identification of potential improvements to crash components for road safety vehicles under real-world conditions. The outcomes of this investigation aim to demonstrate the feasibility of repurposing recycled aluminium beverage cans as sustainable, low-cost, and efficient energy absorbers to enhance road safety and vehicle crash protection. Finally, the crashworthiness parameters, such as specific energy absorption (SEA) and mean crush force (Fm), are compared between experimental and numerical results with errors of less than 10%.
- Open Access
- 7 September 2026
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 10 (9) , 343
Comparative SPH–Finite Element Assessment of Aerospace Material Systems Under Bird-Strike Loading
Bird strikes cause aircraft damage, create serious risks to human safety and can contribute to catastrophic incidents, while continuing to impose substantial economic costs on airlines. The impact combines high kinetic energy with discontinuous, strongly nonlinear contact over a short duration, producing large structural deformations; appropriate nonlinear simulation techniques are therefore required to capture this complex interaction. For this purpose, the present study applies established Smoothed Particle Hydrodynamics (SPH)–finite element modelling ingredients to a controlled matrix of aerospace material systems and target geometries. The approach is first benchmarked against a published aluminium flat-plate bird-impact test using a raster-digitised force-history comparison, after which monolithic metallic and composite structures and source-described honeycomb-sandwich alternatives are assessed in flat-panel and curved leading-edge configurations. The results show that contact-force and local-displacement rankings depend strongly on target geometry and response metric, with the curved leading edge changing the ordering observed for the flat panel. More compliant systems generally permit greater local displacement, whereas stiffer systems restrict displacement but can sustain higher short-duration force peaks; consequently, no universal material ranking follows from a single response measure, and the results are most suitable for preliminary design screening.
- 7 September 2026
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 10 (9) , 343
Open AccessComparative SPH–Finite Element Assessment of Aerospace Material Systems Under Bird-Strike Loading
Bird strikes cause aircraft damage, create serious risks to human safety and can contribute to catastrophic incidents, while continuing to impose substantial economic costs on airlines. The impact combines high kinetic energy with discontinuous, strongly nonlinear contact over a short duration, producing large structural deformations; appropriate nonlinear simulation techniques are therefore required to capture this complex interaction. For this purpose, the present study applies established Smoothed Particle Hydrodynamics (SPH)–finite element modelling ingredients to a controlled matrix of aerospace material systems and target geometries. The approach is first benchmarked against a published aluminium flat-plate bird-impact test using a raster-digitised force-history comparison, after which monolithic metallic and composite structures and source-described honeycomb-sandwich alternatives are assessed in flat-panel and curved leading-edge configurations. The results show that contact-force and local-displacement rankings depend strongly on target geometry and response metric, with the curved leading edge changing the ordering observed for the flat panel. More compliant systems generally permit greater local displacement, whereas stiffer systems restrict displacement but can sustain higher short-duration force peaks; consequently, no universal material ranking follows from a single response measure, and the results are most suitable for preliminary design screening.
- Open Access
- 16 April 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (4) , 213
Analytical Development of Impact Response of Stiffened Composite Panel with Optimum Structural Behaviour
This paper presents an analytical framework for the preliminary design of stringer-stiffened composite panels subjected to low-velocity impact. The formulation combines First-Order Shear Deformation Theory with a two-degree-of-freedom spring–mass model, while the super-stringer is represented as a Euler–Bernoulli beam whose bending contribution is transferred to the skin mid-surface through the parallel axis theorem. This provides a computationally efficient tool for rapid parametric assessment of stiffened configurations at the early design stage. To support laminate selection, a Specific Impact Energy Index (SIEI) is introduced to rank configurations according to their elastic energy storage efficiency relative to the product of skin and stringer thicknesses. The tool is validated against both published experimental results and a finite element dynamic explicit model, demonstrating a good approximation of the impact response. It is then applied to identify the optimum laminate configuration for a super-stringer case study within the design space considered.
- 16 April 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (4) , 213
Open AccessAnalytical Development of Impact Response of Stiffened Composite Panel with Optimum Structural Behaviour
This paper presents an analytical framework for the preliminary design of stringer-stiffened composite panels subjected to low-velocity impact. The formulation combines First-Order Shear Deformation Theory with a two-degree-of-freedom spring–mass model, while the super-stringer is represented as a Euler–Bernoulli beam whose bending contribution is transferred to the skin mid-surface through the parallel axis theorem. This provides a computationally efficient tool for rapid parametric assessment of stiffened configurations at the early design stage. To support laminate selection, a Specific Impact Energy Index (SIEI) is introduced to rank configurations according to their elastic energy storage efficiency relative to the product of skin and stringer thicknesses. The tool is validated against both published experimental results and a finite element dynamic explicit model, demonstrating a good approximation of the impact response. It is then applied to identify the optimum laminate configuration for a super-stringer case study within the design space considered.
- Open Access
Experimental and Numerical Analysis of a Test Rig for Structural Testing of a Full-Scale Aircraft Wing
Complexities are involved in testing an aircraft structure, including its size, which is essential for determining cost and feasibility. This paper focuses on the novelty of investigating the use of a scaled-down version of a full-scale aircraft wing and a test rig to predict the test rig’s structural response to the wing’s loading condition, thereby improving design and modelling techniques for the test rig. This paper also presents a methodology for sizing the test rig and the aircraft wing to perform structural tests on the wing. Numerical and experimental models subjected to various load cases are compared. This study begins by justifying the use of finite element analysis (FEA) for relevant parts of the test rig. A detailed explanation of the sizing method and its overall effect on the test rig is also provided. The results indicate a substantial similarity between the numerical and experimental models with respect to the stresses and deformation of the test specimen.
Open AccessExperimental and Numerical Analysis of a Test Rig for Structural Testing of a Full-Scale Aircraft Wing
Complexities are involved in testing an aircraft structure, including its size, which is essential for determining cost and feasibility. This paper focuses on the novelty of investigating the use of a scaled-down version of a full-scale aircraft wing and a test rig to predict the test rig’s structural response to the wing’s loading condition, thereby improving design and modelling techniques for the test rig. This paper also presents a methodology for sizing the test rig and the aircraft wing to perform structural tests on the wing. Numerical and experimental models subjected to various load cases are compared. This study begins by justifying the use of finite element analysis (FEA) for relevant parts of the test rig. A detailed explanation of the sizing method and its overall effect on the test rig is also provided. The results indicate a substantial similarity between the numerical and experimental models with respect to the stresses and deformation of the test specimen.
- Open Access
- 23 September 2025
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (10) , 514
Crown-Tulip Trigger Mechanisms to Improve Crashworthiness Design of Composite Tubular Structures
Background: This article presents the design development of a new crown-tulip trigger mechanism to initiate progressive failure and reduce initial collapse load in comparison with the existing trigger designs of bevel and tulip in tubular composite structures. Objectives: Through experimental impact testing, comparisons are drawn to the existing designs, such as the 45° bevel and 4T90° tulip trigger mechanism. Methods: This experimental testing design phase demonstrated a significant improvement in the crush force efficiency of crown-tulip trigger mechanisms compared to the previously established Tulip trigger design (4T90°). The experimental results were utilised to develop equivalent numerical models in LS-DYNA. Results: The validated models were employed for further design development, studying the influence of increased bevel angles (30°, 45°, and 60°), tulip angles (90°, 100°, 120°, 140°, and 160°), crown notch depth, crown notch angle, and number of tulip tips/crown notches on the crashworthiness and force response. Conclusions: This culminated in the numerical design development of the 4T160°-40°-2 mm crown-tulip trigger, which achieved 20% higher specific energy absorption, a 22% increase in crush force efficiency, and a 36% higher mean force compared with the 4T90° Tulip-triggered specimen. The outcomes of this research will be implemented in automotive, aerospace, and defence sub-structures.
- 23 September 2025
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (10) , 514
Open AccessCrown-Tulip Trigger Mechanisms to Improve Crashworthiness Design of Composite Tubular Structures
Background: This article presents the design development of a new crown-tulip trigger mechanism to initiate progressive failure and reduce initial collapse load in comparison with the existing trigger designs of bevel and tulip in tubular composite structures. Objectives: Through experimental impact testing, comparisons are drawn to the existing designs, such as the 45° bevel and 4T90° tulip trigger mechanism. Methods: This experimental testing design phase demonstrated a significant improvement in the crush force efficiency of crown-tulip trigger mechanisms compared to the previously established Tulip trigger design (4T90°). The experimental results were utilised to develop equivalent numerical models in LS-DYNA. Results: The validated models were employed for further design development, studying the influence of increased bevel angles (30°, 45°, and 60°), tulip angles (90°, 100°, 120°, 140°, and 160°), crown notch depth, crown notch angle, and number of tulip tips/crown notches on the crashworthiness and force response. Conclusions: This culminated in the numerical design development of the 4T160°-40°-2 mm crown-tulip trigger, which achieved 20% higher specific energy absorption, a 22% increase in crush force efficiency, and a 36% higher mean force compared with the 4T90° Tulip-triggered specimen. The outcomes of this research will be implemented in automotive, aerospace, and defence sub-structures.
- Open Access
- 21 May 2025
- Published by Springer Nature in Applied Composite Materials
- p. 1-37
Through-the-Thickness Z-pinning Reinforcements to Improve Energy Absorption Capabilities of CFRP Crash Structures: Numerical Development
This study employs numerical methods to model through-the-thickness reinforcements in CFRP tubular structures under axial impact, investigating the influence of reinforcement configurations on crashworthiness performance. Experimental validation involves testing unpinned tubular structures to establish a baseline model. LS-DYNA finite element models simulate low-velocity axial impacts, incorporating energy-based tiebreak contacts or solid cohesive elements to describe interlaminar bridging. Through-the-thickness are introduced through a homogenous mesh system or locally refined mesh at pin locations. Various reinforced tube designs with different pin diameters and areal densities are examined to identify the optimal pinned design for crashworthiness. The research demonstrates numerically that pinning enhances crashworthiness performances in axial crushing of composite tubes.
- 21 May 2025
- Published by Springer Nature in Applied Composite Materials
- p. 1-37
Open AccessThrough-the-Thickness Z-pinning Reinforcements to Improve Energy Absorption Capabilities of CFRP Crash Structures: Numerical Development
This study employs numerical methods to model through-the-thickness reinforcements in CFRP tubular structures under axial impact, investigating the influence of reinforcement configurations on crashworthiness performance. Experimental validation involves testing unpinned tubular structures to establish a baseline model. LS-DYNA finite element models simulate low-velocity axial impacts, incorporating energy-based tiebreak contacts or solid cohesive elements to describe interlaminar bridging. Through-the-thickness are introduced through a homogenous mesh system or locally refined mesh at pin locations. Various reinforced tube designs with different pin diameters and areal densities are examined to identify the optimal pinned design for crashworthiness. The research demonstrates numerically that pinning enhances crashworthiness performances in axial crushing of composite tubes.
- Open Access
- 5 October 2024
- Published by Springer Nature in Applied Composite Materials
- Vol. 32 (1) , 21-44
Effect of Embedded Shape Memory Alloy (SMA) on the Low-velocity Impact Behaviour of Stringer Stiffened Composite Plates
This study presents an analytical model of low-velocity impact on composite plates, possessing either flat or cylindrical shapes. The overall plate`s stiffness properties are varied with an additionally assembled Ω-stringer and embedded shape memory alloy wires in the composite material, using only the shape memory effect. This analytical approach enables a low-effort but sufficiently accurate design of low-energy-impacted structures. Comprehensive analytical equations are developed based on the inclusion of the stringer effect on the curved panels. For both stringer-stiffened and non-stiffened plate models, parameter variations regarding the impact and shape memory alloy (SMA) wire integration are conducted. The effects can be classified as changes in essential and acquired stiffness. Our results indicate that SMAs improve the energy absorption capability of stiffened composite panels.
- 5 October 2024
- Published by Springer Nature in Applied Composite Materials
- Vol. 32 (1) , 21-44
Open AccessEffect of Embedded Shape Memory Alloy (SMA) on the Low-velocity Impact Behaviour of Stringer Stiffened Composite Plates
This study presents an analytical model of low-velocity impact on composite plates, possessing either flat or cylindrical shapes. The overall plate`s stiffness properties are varied with an additionally assembled Ω-stringer and embedded shape memory alloy wires in the composite material, using only the shape memory effect. This analytical approach enables a low-effort but sufficiently accurate design of low-energy-impacted structures. Comprehensive analytical equations are developed based on the inclusion of the stringer effect on the curved panels. For both stringer-stiffened and non-stiffened plate models, parameter variations regarding the impact and shape memory alloy (SMA) wire integration are conducted. The effects can be classified as changes in essential and acquired stiffness. Our results indicate that SMAs improve the energy absorption capability of stiffened composite panels.
- Open Access
- 29 November 2023
- Published by Springer Nature in Applied Composite Materials
- Vol. 31 (2) , 489-509
Crashworthiness of Foam-Filled and Reinforced Honeycomb Crash Absorbers in Transverse Direction
Honeycomb crash absorbers have been widely studied as energy absorption devices for use in automotive industries. However, none of these investigations have studied the side impact of empty and foam-filled honeycomb absorbers and adding stiffeners between the different layers of the corrugated sheets which are composing the honeycomb structure to analyse the structure under transverse (L-direction) impacts. In this paper, the foam-filled and reinforced honeycomb crash absorbers are investigated under axial (T) and transverse (L) loading directions. Experimental results for both empty and foam-filled specimens under quasi-static and impact loads were implemented to validate the developed finite element model. Finite element analysis (FEA) was performed to find out the crashworthiness behaviour of the structure under axial and transverse impacts according to road conditions. Finally, a new design of stiffened honeycomb crash absorber was developed and investigated to reduce the level of acceleration experienced by the passengers during the crash event. In this regard, it is concluded that all the requirements related to the energy absorption capabilities and generated deceleration under impact loading can be met by introducing an advanced method to reinforce honeycomb absorbers using stiffeners. It is also proven that the thickness of these stiffeners will not significantly influence the force levels. Due to increase of wall thickness from 1 to 3 mm, the mean crushing force increased from 129 kN to 148 kN. This growth is not sufficient as the goal is to obtain a mean crushing force of 300 kN. Thickening the stiffeners would lead to a loss of efficiency of the structure, as the small increase in mean force would not make up for the gain in mass. Thus, increasing the corrugated sheet’ thickness becomes necessary.
- 29 November 2023
- Published by Springer Nature in Applied Composite Materials
- Vol. 31 (2) , 489-509
Open AccessCrashworthiness of Foam-Filled and Reinforced Honeycomb Crash Absorbers in Transverse Direction
Honeycomb crash absorbers have been widely studied as energy absorption devices for use in automotive industries. However, none of these investigations have studied the side impact of empty and foam-filled honeycomb absorbers and adding stiffeners between the different layers of the corrugated sheets which are composing the honeycomb structure to analyse the structure under transverse (L-direction) impacts. In this paper, the foam-filled and reinforced honeycomb crash absorbers are investigated under axial (T) and transverse (L) loading directions. Experimental results for both empty and foam-filled specimens under quasi-static and impact loads were implemented to validate the developed finite element model. Finite element analysis (FEA) was performed to find out the crashworthiness behaviour of the structure under axial and transverse impacts according to road conditions. Finally, a new design of stiffened honeycomb crash absorber was developed and investigated to reduce the level of acceleration experienced by the passengers during the crash event. In this regard, it is concluded that all the requirements related to the energy absorption capabilities and generated deceleration under impact loading can be met by introducing an advanced method to reinforce honeycomb absorbers using stiffeners. It is also proven that the thickness of these stiffeners will not significantly influence the force levels. Due to increase of wall thickness from 1 to 3 mm, the mean crushing force increased from 129 kN to 148 kN. This growth is not sufficient as the goal is to obtain a mean crushing force of 300 kN. Thickening the stiffeners would lead to a loss of efficiency of the structure, as the small increase in mean force would not make up for the gain in mass. Thus, increasing the corrugated sheet’ thickness becomes necessary.
- Open Access
- 23 May 2023
- Published by Springer Nature in Applied Composite Materials
- Vol. 30 (5) , 1529-1545
Z-Pinning Techniques to Improve Energy Absorption Capabilities of CFRP Tubular Structures
This paper investigates the use of z-pinning reinforcement in CFRP tubular structures under axial impact, to find the optimum design to increase the specific energy absorption (SEA). Through-the-thickness reinforcement is known as a technique to improve integrity and fracture resistance in composite materials and structures. Manufacturing and testing of unpinned tubular structures are conducted to create a base model to validate numerical results. A finite element model of the tube under dynamic impact is developed using LS-DYNA software, conducting parametric studies, mesh sensitivity analysis and trigger modelling research. The proposed z-pinning modelling techniques are researched, and an energy-based contact model is proposed to model pinned areas. Five different designs of reinforced tubes are designed and analysed, to find the optimum z-pinned pattern in terms of SEA. The novelties of this research indicate that z-pinning can improve the SEA and reduce the initial collapse load during crushing. Our results indicate that the vertical banded design shows the highest SEA and least initial collapse load values in comparison with the unpinned specimen, which indicates an improvement in the crashworthiness parameters of z-pinned composite tubes.
- 23 May 2023
- Published by Springer Nature in Applied Composite Materials
- Vol. 30 (5) , 1529-1545
Open AccessZ-Pinning Techniques to Improve Energy Absorption Capabilities of CFRP Tubular Structures
This paper investigates the use of z-pinning reinforcement in CFRP tubular structures under axial impact, to find the optimum design to increase the specific energy absorption (SEA). Through-the-thickness reinforcement is known as a technique to improve integrity and fracture resistance in composite materials and structures. Manufacturing and testing of unpinned tubular structures are conducted to create a base model to validate numerical results. A finite element model of the tube under dynamic impact is developed using LS-DYNA software, conducting parametric studies, mesh sensitivity analysis and trigger modelling research. The proposed z-pinning modelling techniques are researched, and an energy-based contact model is proposed to model pinned areas. Five different designs of reinforced tubes are designed and analysed, to find the optimum z-pinned pattern in terms of SEA. The novelties of this research indicate that z-pinning can improve the SEA and reduce the initial collapse load during crushing. Our results indicate that the vertical banded design shows the highest SEA and least initial collapse load values in comparison with the unpinned specimen, which indicates an improvement in the crashworthiness parameters of z-pinned composite tubes.
- Open Access
- 1 March 2023
- Published by Springer Nature in Applied Composite Materials
- Vol. 30 (3) , 705-726
Advancement in Design and Failure Analysis of Aluminium Foam-filled Honeycomb Crash Absorbers
Honeycomb structures are frequently used as energy absorption devices in the automotive and aerospace industry. Many studies have been conducted to optimise these structures and improve crashworthiness behaviour. This paper attempts to improve the crashworthiness behaviour of a honeycomb crash box by filling the cells with open-cell aluminium foams. Experimental tests were conducted to develop the honeycomb and aluminium foam material model and, also, to validate the finite element model by experimental data. The finite element model was developed in ABAQUS, and different variables were parameterised to aim a quick implementation. The empty aluminium honeycomb crash box is used as a term of comparison with the foam-filled ones. Foam-filling the crash box allows the control of the densification zone for different impact energies using open-cell aluminium foam, which shows the main novelty of this research. In the end, the optimised structure is presented concerning the optimum number of foam-filled cells and, also, to the aluminium foam’s density that best fits this application.
- 1 March 2023
- Published by Springer Nature in Applied Composite Materials
- Vol. 30 (3) , 705-726
Open AccessAdvancement in Design and Failure Analysis of Aluminium Foam-filled Honeycomb Crash Absorbers
Honeycomb structures are frequently used as energy absorption devices in the automotive and aerospace industry. Many studies have been conducted to optimise these structures and improve crashworthiness behaviour. This paper attempts to improve the crashworthiness behaviour of a honeycomb crash box by filling the cells with open-cell aluminium foams. Experimental tests were conducted to develop the honeycomb and aluminium foam material model and, also, to validate the finite element model by experimental data. The finite element model was developed in ABAQUS, and different variables were parameterised to aim a quick implementation. The empty aluminium honeycomb crash box is used as a term of comparison with the foam-filled ones. Foam-filling the crash box allows the control of the densification zone for different impact energies using open-cell aluminium foam, which shows the main novelty of this research. In the end, the optimised structure is presented concerning the optimum number of foam-filled cells and, also, to the aluminium foam’s density that best fits this application.