Vaclav Hucl
Vaclav Hucl has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
- Martin Cizek
Institute of Scientific Instruments of the CAS, v.v.i. (Czech Republic)
27 shared publications - Josef Lazar
Institute of Scientific Instruments of the CAS, v.v.i. (Czech Republic)
24 shared publications - Simon Rerucha
Institute of Scientific Instruments, Czech Academy of Sciences, Královopolská 147, 612 00 Brno, Czech Republic
17 shared publications - Jan Hrabina
Institute of Scientific Instruments of the CAS, v.v.i. (Czech Republic)
14 shared publications Ondrej Cip
Institute of Scientific Instruments of the CAS, v.v.i. (Czech Republic)
13 shared publications- Martin Šarbort
The Czech Academy of Sciences, Institute of Scientific Instruments, Královopolská 147, 612 64 Brno, Czech Republic
7 shared publications
Latest Publications
- 18 December 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10976, 1097617
Optical frequency transfers between ISI CAS and CESNET
Optical fiber links in Europe are with growing importance utilized in comparison campaigns of experimental optical clocks to verify their ultimate relative stability. We present a 306 km long optical fiber link established in the Czech Republic between ISI CAS Brno and CESNET Prague. This link will to deliver stable optical frequencies from laser standards located at ISI CAS in Brno to prospective academic and industrial partners in the Prague area. Our contribution reports on the current state of the fiber link for phase-coherent transfer of optical frequency. The long-haul link operates on an internet communication fiber in a dedicated 1540-1546nm DWDM window. A narrow-linewidth laser (Koheras BASIK) working at 1540.5 nm locked to a high-finesse optical cavity (Q = 300 000) serves as the optical frequency standard and source of highly coherent laser light at the transmitting side.
- 18 December 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10976, 1097617
Optical frequency transfers between ISI CAS and CESNET
Optical fiber links in Europe are with growing importance utilized in comparison campaigns of experimental optical clocks to verify their ultimate relative stability. We present a 306 km long optical fiber link established in the Czech Republic between ISI CAS Brno and CESNET Prague. This link will to deliver stable optical frequencies from laser standards located at ISI CAS in Brno to prospective academic and industrial partners in the Prague area. Our contribution reports on the current state of the fiber link for phase-coherent transfer of optical frequency. The long-haul link operates on an internet communication fiber in a dedicated 1540-1546nm DWDM window. A narrow-linewidth laser (Koheras BASIK) working at 1540.5 nm locked to a high-finesse optical cavity (Q = 300 000) serves as the optical frequency standard and source of highly coherent laser light at the transmitting side.
- 18 December 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10976, 109760Q
Optical amplification for quantum sources of ultra-stable optical frequency
The reach of any all-optical transmission is limited by attenuation of transmission path and other factors as signal to noise ratio, and it can be extended by all-optical amplification. Bidirectional single fibre transmission introduces an issue of bidirectional symmetrical amplifiers in order not to lose advantage of path symmetry. In case of time transfer, quasibidirectional amplification might be acceptable when supported by specific arrangements, e.g. as much as possible equal arrangement for disjoint segments of the path. Time transfer with best available accuracy or optical frequency transfers require single path optical amplifiers that are further considered. In this constitution, unfortunately, reflections together with Rayleigh back-scattering will create feedback. In case feedback is strong enough and discrete amplifier operates in high gain regime (about 20dB), the whole system will start to oscillate. It saturates the gain of amplifiers and also can generate errors, when lasing in a transmission band. In the article, we review possible all optical amplification methods including those allowing to use untraditional transmission bands (outside C band).
- 18 December 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10976, 109760Q
Optical amplification for quantum sources of ultra-stable optical frequency
The reach of any all-optical transmission is limited by attenuation of transmission path and other factors as signal to noise ratio, and it can be extended by all-optical amplification. Bidirectional single fibre transmission introduces an issue of bidirectional symmetrical amplifiers in order not to lose advantage of path symmetry. In case of time transfer, quasibidirectional amplification might be acceptable when supported by specific arrangements, e.g. as much as possible equal arrangement for disjoint segments of the path. Time transfer with best available accuracy or optical frequency transfers require single path optical amplifiers that are further considered. In this constitution, unfortunately, reflections together with Rayleigh back-scattering will create feedback. In case feedback is strong enough and discrete amplifier operates in high gain regime (about 20dB), the whole system will start to oscillate. It saturates the gain of amplifiers and also can generate errors, when lasing in a transmission band. In the article, we review possible all optical amplification methods including those allowing to use untraditional transmission bands (outside C band).
- 20 June 2018
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 120 (25) , 253602
Nonclassical Light from Large Ensembles of Trapped Ions
The vast majority of physical objects we are dealing with are almost exclusively made of atoms. Because of their discrete level structure, single atoms have proved to be emitters of light, which is incompatible with the classical description of electromagnetic waves. We demonstrate this incompatibility for atomic fluorescence when scaling up the size of the source ensemble, which consists of trapped atomic ions, by several orders of magnitude. The presented measurements of nonclassical statistics on light unconditionally emitted from ensembles containing up to more than a thousand ions promise further scalability to much larger emitter numbers. The methodology can be applied to a broad range of experimental platforms focusing on the bare nonclassical character of single isolated emitters.
- 20 June 2018
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 120 (25) , 253602
Nonclassical Light from Large Ensembles of Trapped Ions
The vast majority of physical objects we are dealing with are almost exclusively made of atoms. Because of their discrete level structure, single atoms have proved to be emitters of light, which is incompatible with the classical description of electromagnetic waves. We demonstrate this incompatibility for atomic fluorescence when scaling up the size of the source ensemble, which consists of trapped atomic ions, by several orders of magnitude. The presented measurements of nonclassical statistics on light unconditionally emitted from ensembles containing up to more than a thousand ions promise further scalability to much larger emitter numbers. The methodology can be applied to a broad range of experimental platforms focusing on the bare nonclassical character of single isolated emitters.
- 1 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Control of repetition frequency of a femtosecond laser by an external cavity working as the length sensor
New lasers, special digital signal processing electronics, algorithms and new materials for optics enabled development of new absolute distance measurement methods. The phenomenon of the mode-lock of the femtosecond pulse laser increased a number of potential applications with distance surveying where a stable generator of very short and periodically repeated coherent pulses can be used. The aim of the work is a presentation of our unique control algorithm for measuring the length of unknown distance with direct traceability to a time standard. The principle is based on a passive optical cavity with mirrors keeping distance to be measured. Time spacing of short femtosecond pulses generated by femtosecond laser is optically phase locked to the cavity free spectral range. A value of the repetition frequency of the laser determines the measured distance in that case.
- 1 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Control of repetition frequency of a femtosecond laser by an external cavity working as the length sensor
New lasers, special digital signal processing electronics, algorithms and new materials for optics enabled development of new absolute distance measurement methods. The phenomenon of the mode-lock of the femtosecond pulse laser increased a number of potential applications with distance surveying where a stable generator of very short and periodically repeated coherent pulses can be used. The aim of the work is a presentation of our unique control algorithm for measuring the length of unknown distance with direct traceability to a time standard. The principle is based on a passive optical cavity with mirrors keeping distance to be measured. Time spacing of short femtosecond pulses generated by femtosecond laser is optically phase locked to the cavity free spectral range. A value of the repetition frequency of the laser determines the measured distance in that case.
- 1 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 293-295
Phase-coherent transfer of optical frequency between ISI CAS and CESNET
The contribution reports on the current state of the fibre link for phase-coherent transfer of optical frequency between ISI CAS (Brno, CZ) and CESNET (Prague, CZ). The 306 km long link is operated on an internet communication fibre in a dedicated 1540-1546 nm DWDM window. The narrow linewidth laser Kohereas ADJUSTIK working at 1540.5 nm locked to the nearest tooth of the stabilized optical frequency comb referenced by the H-Maser serves as the laser standard at the transmitting side.
- 1 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 293-295
Phase-coherent transfer of optical frequency between ISI CAS and CESNET
The contribution reports on the current state of the fibre link for phase-coherent transfer of optical frequency between ISI CAS (Brno, CZ) and CESNET (Prague, CZ). The 306 km long link is operated on an internet communication fibre in a dedicated 1540-1546 nm DWDM window. The narrow linewidth laser Kohereas ADJUSTIK working at 1540.5 nm locked to the nearest tooth of the stabilized optical frequency comb referenced by the H-Maser serves as the laser standard at the transmitting side.
- 1 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 386-388
Two-stage stabilization setup of the laser working on 729 nm for spectroscopy with cold40Ca+ ion
The paper deals with the stabilization of an Extended Cavity Diode Laser (ECDL) working at 729 nm for precision spectroscopy with trapped and cooled 40 Ca+ ion. For an interrogating and readout ion oscillation the laser with ultra-narrow linewidth is required. Main cornerstones are explained to achieve a laser with Hz or sub-Hz spectral linewidth. An optical setup for this laser and also the necessary electro-optic and electronic components are demonstrated. The paper presents the experimental design that comprises of the two-stage linewidth narrowing process and a facility for the frequency and noise analysis. The presented experimental results show the effect of the linewidth narrowing where the linewidth of the ECDL was narrowed down to a kHz level.
- 1 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 386-388
Two-stage stabilization setup of the laser working on 729 nm for spectroscopy with cold40Ca+ ion
The paper deals with the stabilization of an Extended Cavity Diode Laser (ECDL) working at 729 nm for precision spectroscopy with trapped and cooled 40 Ca+ ion. For an interrogating and readout ion oscillation the laser with ultra-narrow linewidth is required. Main cornerstones are explained to achieve a laser with Hz or sub-Hz spectral linewidth. An optical setup for this laser and also the necessary electro-optic and electronic components are demonstrated. The paper presents the experimental design that comprises of the two-stage linewidth narrowing process and a facility for the frequency and noise analysis. The presented experimental results show the effect of the linewidth narrowing where the linewidth of the ECDL was narrowed down to a kHz level.
- 1 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 392-394
The compact setup for laser cooling and high-resolution spectroscopy with cold 40Ca+ ions
We report on the working scheme of the experimental infrastructure for 40 Ca+ ion trapping and laser cooling. The important effort is to put on the excitation lasers control and their referencing to an optical frequency comb disciplined by an active H-maser. The principle of other instruments control necessary for the trapping and laser cooling setup is presented as well. The work also reports the records of the spectroscopic measurements of the ion multi-level electronic structure i.e. the occurrence of the dark resonances in the fluorescence signal on the dipole transition and the forbidden transition spectrum of the trapped single 40 Ca+ ion.
- 1 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 392-394
The compact setup for laser cooling and high-resolution spectroscopy with cold 40Ca+ ions
We report on the working scheme of the experimental infrastructure for 40 Ca+ ion trapping and laser cooling. The important effort is to put on the excitation lasers control and their referencing to an optical frequency comb disciplined by an active H-maser. The principle of other instruments control necessary for the trapping and laser cooling setup is presented as well. The work also reports the records of the spectroscopic measurements of the ion multi-level electronic structure i.e. the occurrence of the dark resonances in the fluorescence signal on the dipole transition and the forbidden transition spectrum of the trapped single 40 Ca+ ion.
- 1 July 2017
- Published by Elsevier in Precision Engineering
- Vol. 49, 322-331
System for automatic gauge block length measurement optimized for secondary length metrology
- 1 July 2017
- Published by Elsevier in Precision Engineering
- Vol. 49, 322-331
System for automatic gauge block length measurement optimized for secondary length metrology
- 26 June 2017
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10329, 1032943-1032943-8
Optical fiber sensors measurement system and special fibers improvement
- 26 June 2017
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10329, 1032943-1032943-8
Optical fiber sensors measurement system and special fibers improvement
- 16 February 2017
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 28 (4) , 045204
Laser source for dimensional metrology: investigation of an iodine stabilized system based on narrow linewidth 633 nm DBR diode
We demonstrated that an iodine stabilized distributed Bragg reflector (DBR) diode based laser system lasing at a wavelength in close proximity to λ = 633 nm could be used as an alternative laser source to the helium-neon lasers in both scientific and industrial metrology. This yields additional advantages besides the optical frequency stability and coherence: inherent traceability, wider optical frequency tuning range, higher output power and high frequency modulation capability. We experimentally investigated the characteristics of the laser source in two major steps: first using a wavelength meter referenced to a frequency comb controlled with a hydrogen maser and then on an interferometric optical bench testbed where we compared the performance of the laser system with that of a traditional frequency stabilized He–Ne laser. The results indicate that DBR diode laser system provides a good laser source for applications in dimensional (nano)metrology, especially in conjunction with novel interferometric detection methods exploiting high frequency modulation or multiaxis measurement systems.
- 16 February 2017
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 28 (4) , 045204
Laser source for dimensional metrology: investigation of an iodine stabilized system based on narrow linewidth 633 nm DBR diode
We demonstrated that an iodine stabilized distributed Bragg reflector (DBR) diode based laser system lasing at a wavelength in close proximity to λ = 633 nm could be used as an alternative laser source to the helium-neon lasers in both scientific and industrial metrology. This yields additional advantages besides the optical frequency stability and coherence: inherent traceability, wider optical frequency tuning range, higher output power and high frequency modulation capability. We experimentally investigated the characteristics of the laser source in two major steps: first using a wavelength meter referenced to a frequency comb controlled with a hydrogen maser and then on an interferometric optical bench testbed where we compared the performance of the laser system with that of a traditional frequency stabilized He–Ne laser. The results indicate that DBR diode laser system provides a good laser source for applications in dimensional (nano)metrology, especially in conjunction with novel interferometric detection methods exploiting high frequency modulation or multiaxis measurement systems.