Seok-Hwan Huh
Seok-Hwan Huh has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Bon Heun Koo
College of Mechatronic Engineering, Changwon National University, Changwon 51140, Gyeongsangnam-do, Republic of Korea
8 shared publications Akshay Kumar
4 shared publicationsKavita Kumari
4 shared publicationsMohit K. Sharma
4 shared publications- Akshay Kumar
School of Material Science and Engineering, Changwon National University, Changwon 51140, Gyeongnam, Republic of Korea
3 shared publications Jong-Woo Kim
3 shared publications
Latest Publications
- 24 June 2023
- Published by Elsevier in Current Applied Physics
- Vol. 53, 56-64
Effect of hydrazine on structural, morphological and magnetic properties of SmCo-Co nanocomposites
- 24 June 2023
- Published by Elsevier in Current Applied Physics
- Vol. 53, 56-64
Effect of hydrazine on structural, morphological and magnetic properties of SmCo-Co nanocomposites
- 21 February 2023
- Published by Elsevier in Current Applied Physics
- Vol. 49, 35-44
Evidence of a moderate refrigerant capacity in cation disordered Ruddlesden-Popper compounds A1.4Sr1.6Mn2O7 (A = La, Pr, Nd) probed with various figures of merit
- 21 February 2023
- Published by Elsevier in Current Applied Physics
- Vol. 49, 35-44
Evidence of a moderate refrigerant capacity in cation disordered Ruddlesden-Popper compounds A1.4Sr1.6Mn2O7 (A = La, Pr, Nd) probed with various figures of merit
- Open Access
N-Containing Hybrid Composites Coatings for Enhanced Fire-Retardant Properties of Cotton Fabric Using One-Pot Sol–Gel Process
In this report, a unique methodology/process steps were followed using Sol–gel-based concept to deposit thin flame-retardant coatings on cotton fabric. Surface microstructure and compositional analysis of the coated cotton were carried out using scanning electronic microscope (SEM), which explored significant coverage of the fabric. The obtained samples were further analyzed through rupturing mechanism test and color check. Compositional investigation of the coated samples was carried through Attenuated total reflection Fourier transform infrared (ATR–FTIR) and energy-dispersive X-rays spectroscopy (EDS) analysis. Thermal analyses were carried out through Thermogravimetric analysis (TGA) and Vertical flame tests (VFT), which suggested higher resistance of the coatings obtained for 5 h and zero heat-treatment time on the cotton fabric. A 28.86% char residue was obtained for the same sample (ET–5h–RT) coupled with higher degradation temperature and excellent combustion properties.
Open AccessN-Containing Hybrid Composites Coatings for Enhanced Fire-Retardant Properties of Cotton Fabric Using One-Pot Sol–Gel Process
In this report, a unique methodology/process steps were followed using Sol–gel-based concept to deposit thin flame-retardant coatings on cotton fabric. Surface microstructure and compositional analysis of the coated cotton were carried out using scanning electronic microscope (SEM), which explored significant coverage of the fabric. The obtained samples were further analyzed through rupturing mechanism test and color check. Compositional investigation of the coated samples was carried through Attenuated total reflection Fourier transform infrared (ATR–FTIR) and energy-dispersive X-rays spectroscopy (EDS) analysis. Thermal analyses were carried out through Thermogravimetric analysis (TGA) and Vertical flame tests (VFT), which suggested higher resistance of the coatings obtained for 5 h and zero heat-treatment time on the cotton fabric. A 28.86% char residue was obtained for the same sample (ET–5h–RT) coupled with higher degradation temperature and excellent combustion properties.
- Open Access
- 26 December 2022
- Published by MDPI AG in Magnetochemistry
- Vol. 9 (1) , 8
Evidence of Hysteresis Free Ferromagnetic Nature and Significant Magnetocaloric Parameters in FeNi Binary Alloy
In this study, our aim is to investigate the structural, magnetic, and magnetocaloric properties of the FeNi binary alloy. The FeNi alloy with Fe65Ni35 composition was prepared by ball milling followed by the annealing and quenching processes. A Rietveld refinement analysis of structural results reveals that this system has coexisting cubic structural phases with a dominant face-centered cubic phase (Fm-3m;γ-FeNi). Magnetization results of this compound indicate the presence of ferromagnetic ordering and the magnetic transition observed around 100 K. Moreover, an Arrott plot study provides information about the order of phase transition, which is found in the second-order near the ordering temperature, whereas first-order nature is also noted in the low-temperature region. The significant magnetocaloric parameters, i.e., magnetic entropy change (ΔSM~0.495 J/kg-K) and relative cooling power (88 J/kg), are noted over a wide temperature range. The power law dependency of magnetic entropy change with the applied field is also investigated. Due to their significant magnetocaloric performance over a wide temperature range, these multiphase alloys may be a good candidate for room-temperature to low-temperature magnetic refrigeration.
- 26 December 2022
- Published by MDPI AG in Magnetochemistry
- Vol. 9 (1) , 8
Open AccessEvidence of Hysteresis Free Ferromagnetic Nature and Significant Magnetocaloric Parameters in FeNi Binary Alloy
In this study, our aim is to investigate the structural, magnetic, and magnetocaloric properties of the FeNi binary alloy. The FeNi alloy with Fe65Ni35 composition was prepared by ball milling followed by the annealing and quenching processes. A Rietveld refinement analysis of structural results reveals that this system has coexisting cubic structural phases with a dominant face-centered cubic phase (Fm-3m;γ-FeNi). Magnetization results of this compound indicate the presence of ferromagnetic ordering and the magnetic transition observed around 100 K. Moreover, an Arrott plot study provides information about the order of phase transition, which is found in the second-order near the ordering temperature, whereas first-order nature is also noted in the low-temperature region. The significant magnetocaloric parameters, i.e., magnetic entropy change (ΔSM~0.495 J/kg-K) and relative cooling power (88 J/kg), are noted over a wide temperature range. The power law dependency of magnetic entropy change with the applied field is also investigated. Due to their significant magnetocaloric performance over a wide temperature range, these multiphase alloys may be a good candidate for room-temperature to low-temperature magnetic refrigeration.
- Open Access
- 9 September 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (18) , 9098
Structural, Magnetic, and Magnetocaloric Studies of Ball-Milled Fe100−xTx (T = Ni and Mn) Alloy
Iron-transition metal-based binary and ternary alloys have attracted great attention due to their relevant mechanical, electrical, and magnetic properties. In this paper, we systematically investigate the structural, magnetic, and magnetocaloric behavior of as-milled Fe65T35 (T = Ni and Mn) alloy. The polycrystalline alloys were produced by the planetary ball milling, using a powder-to-ball ratio of 1:3. A structural study reveals that both Fe65Ni35 and Fe65Mn35 compounds have stabilized in α and γ mixed phase within the cubic crystal structure. The alloyed compounds are further characterized by high-resolution field emission scanning electron microscopy (HR-FESEM), which confirms the mixing of both metals in the alloying process. Temperature-dependent magnetic studies do not show any blocking in zero-field-cooled and field-cooled results; however, the field-dependent magnetization study demonstrates the ferromagnetic nature with small hysteresis in both compounds. Both compounds show a significant magnetocaloric effect over a wide temperature range around room temperature. Fe65Ni35 exhibit a slightly higher value in comparison to Fe65Mn35. In both the alloys, magnetic entropy change follows the power law behavior against the external magnetic field, and the value of exponent ‘m’ explains the presence of magnetic correlation. Our investigation in this study communicates that the phase control or coexistence of both phases may be efficacious in obtaining the desirable characteristic of magnetic and magnetocaloric demeanors in such a binary Fe-T alloy.
- 9 September 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (18) , 9098
Open AccessStructural, Magnetic, and Magnetocaloric Studies of Ball-Milled Fe100−xTx (T = Ni and Mn) Alloy
Iron-transition metal-based binary and ternary alloys have attracted great attention due to their relevant mechanical, electrical, and magnetic properties. In this paper, we systematically investigate the structural, magnetic, and magnetocaloric behavior of as-milled Fe65T35 (T = Ni and Mn) alloy. The polycrystalline alloys were produced by the planetary ball milling, using a powder-to-ball ratio of 1:3. A structural study reveals that both Fe65Ni35 and Fe65Mn35 compounds have stabilized in α and γ mixed phase within the cubic crystal structure. The alloyed compounds are further characterized by high-resolution field emission scanning electron microscopy (HR-FESEM), which confirms the mixing of both metals in the alloying process. Temperature-dependent magnetic studies do not show any blocking in zero-field-cooled and field-cooled results; however, the field-dependent magnetization study demonstrates the ferromagnetic nature with small hysteresis in both compounds. Both compounds show a significant magnetocaloric effect over a wide temperature range around room temperature. Fe65Ni35 exhibit a slightly higher value in comparison to Fe65Mn35. In both the alloys, magnetic entropy change follows the power law behavior against the external magnetic field, and the value of exponent ‘m’ explains the presence of magnetic correlation. Our investigation in this study communicates that the phase control or coexistence of both phases may be efficacious in obtaining the desirable characteristic of magnetic and magnetocaloric demeanors in such a binary Fe-T alloy.
- 9 April 2022
- Published by Elsevier in Journal of Materials Science & Technology
- Vol. 124, 232-242
Chemically inducing room temperature spin-crossover in double layered magnetic refrigerants Pr1.4+Sr1.6-Mn2O7 (0.0 ≤ x ≤ 0.5)
- 9 April 2022
- Published by Elsevier in Journal of Materials Science & Technology
- Vol. 124, 232-242
Chemically inducing room temperature spin-crossover in double layered magnetic refrigerants Pr1.4+Sr1.6-Mn2O7 (0.0 ≤ x ≤ 0.5)
- Open Access
- 16 September 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (18) , 8627
Unravelling the Anisotropic Behavior of Nickel—Wires Prepared through External Magnetic Field Assisted Hydrazine Reduction Method
Ni wires, prepared through a hydrazine reduction, were exposed to external magnetic fields of different geometrical shape and configuration during the synthesis denoted as Ni-Non-Magnetic, Ni-Double, Ni-Single, Ni-Ring. Their effect on the wire morphology, magnetization and magnetic anisotropy was then investigated via various characterization techniques viz. X-ray diffraction (XRD), high-resolution field emission scanning electron microscopy (HR-FESEM), and vibrating sample magnetometer (VSM). The polycrystalline single phase of the Ni-wires with face centered cubic symmetry was confirmed through the analysis of XRD patterns. Analysis of HR-FESEM images revealed that the Ni-particles were aligned in form of wire-like morphology. The Ni-single sample formed the wires with minimum diameter compared to the parent sample. The magnetization measurements performed at 300 K and 50 K demonstrated the ferromagnetic behavior of all the samples. The room temperature saturation magnetization (MS) and anisotropy constant (K) of the Ni-wires were reduced upon providing the external field during synthesis. However, the low temperature (50 K) magnetization behavior was rather opposing, indicating enhanced values of MS and K. Among all, Ni-ring sample showed maximum anisotropy with a value of 3.84 × 104 erg/cm3 at 50 K. The ambiguous nature of the anisotropic constant and saturation magnetization ascribed partly to the variation in diameters of Ni-wires and to the intermittent spin-spin exchange interactions of unaligned/partially aligned particles during the synthesis. Briefly, in the present study, it was established that the morphology and magnetic anisotropy of the Ni-wires could be tailored through the external magnetic field assisted synthesis method.
- 16 September 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (18) , 8627
Open AccessUnravelling the Anisotropic Behavior of Nickel—Wires Prepared through External Magnetic Field Assisted Hydrazine Reduction Method
Ni wires, prepared through a hydrazine reduction, were exposed to external magnetic fields of different geometrical shape and configuration during the synthesis denoted as Ni-Non-Magnetic, Ni-Double, Ni-Single, Ni-Ring. Their effect on the wire morphology, magnetization and magnetic anisotropy was then investigated via various characterization techniques viz. X-ray diffraction (XRD), high-resolution field emission scanning electron microscopy (HR-FESEM), and vibrating sample magnetometer (VSM). The polycrystalline single phase of the Ni-wires with face centered cubic symmetry was confirmed through the analysis of XRD patterns. Analysis of HR-FESEM images revealed that the Ni-particles were aligned in form of wire-like morphology. The Ni-single sample formed the wires with minimum diameter compared to the parent sample. The magnetization measurements performed at 300 K and 50 K demonstrated the ferromagnetic behavior of all the samples. The room temperature saturation magnetization (MS) and anisotropy constant (K) of the Ni-wires were reduced upon providing the external field during synthesis. However, the low temperature (50 K) magnetization behavior was rather opposing, indicating enhanced values of MS and K. Among all, Ni-ring sample showed maximum anisotropy with a value of 3.84 × 104 erg/cm3 at 50 K. The ambiguous nature of the anisotropic constant and saturation magnetization ascribed partly to the variation in diameters of Ni-wires and to the intermittent spin-spin exchange interactions of unaligned/partially aligned particles during the synthesis. Briefly, in the present study, it was established that the morphology and magnetic anisotropy of the Ni-wires could be tailored through the external magnetic field assisted synthesis method.
- 1 November 2020
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 20 (11) , 6753-6759
Flower-Like α-Fe2O3 for Removal of Heavy Metals from Wastewater
In the present work flower-like, α-Fe2O3 were synthesized by ethylene-glycol mediated polyol method. The synthesized flower-like, α-Fe2O3 were separated cadmium (Cd2+) chromium (Cr6+) and lead ions (Pb2+) from wastewater. XRD pattern and FESEM images show the obtained sample is pure hematite and flower-like nanostructures average particle sizes 4.0 μm. The BET specific surface area was 47.55 m2g−1. Adsorption experiments were investigated the adsorbent dose, influence pH of the metal ions, sorption times and initial concentrations of heavy metal ions. High efficiency of Cd2+, Cr6+ and Pb2+ removal occurred at pH 7.0, 3.0 and 5.5, respectively. The adsorption equilibrium study showed that the heavy metal ions adsorption of flowers like α-Fe2O3 followed a Langmuir and Freundlich isotherm model. The heavy metal ions adsorption equilibrium data were followed to the Langmuir model. The maximum adsorption capacities were 16.95, 22.22 and 25.64 mg g−1 for Cd2+, Cr6+ and Pb2+ ions respectively. This work determines that the synthesized flower-like α-Fe2O3 is proposed as an efficient nano-adsorbent for wastewater treatment.
- 1 November 2020
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 20 (11) , 6753-6759
Flower-Like α-Fe2O3 for Removal of Heavy Metals from Wastewater
In the present work flower-like, α-Fe2O3 were synthesized by ethylene-glycol mediated polyol method. The synthesized flower-like, α-Fe2O3 were separated cadmium (Cd2+) chromium (Cr6+) and lead ions (Pb2+) from wastewater. XRD pattern and FESEM images show the obtained sample is pure hematite and flower-like nanostructures average particle sizes 4.0 μm. The BET specific surface area was 47.55 m2g−1. Adsorption experiments were investigated the adsorbent dose, influence pH of the metal ions, sorption times and initial concentrations of heavy metal ions. High efficiency of Cd2+, Cr6+ and Pb2+ removal occurred at pH 7.0, 3.0 and 5.5, respectively. The adsorption equilibrium study showed that the heavy metal ions adsorption of flowers like α-Fe2O3 followed a Langmuir and Freundlich isotherm model. The heavy metal ions adsorption equilibrium data were followed to the Langmuir model. The maximum adsorption capacities were 16.95, 22.22 and 25.64 mg g−1 for Cd2+, Cr6+ and Pb2+ ions respectively. This work determines that the synthesized flower-like α-Fe2O3 is proposed as an efficient nano-adsorbent for wastewater treatment.
- Open Access
- 30 April 2018
- Published by The Korean Welding and Joining Society in Journal of Welding and Joining
- Vol. 36 (2) , 1-6
Lifetime Predictions of Printed Circuit Boards under Biased HAST
- 30 April 2018
- Published by The Korean Welding and Joining Society in Journal of Welding and Joining
- Vol. 36 (2) , 1-6
Open AccessLifetime Predictions of Printed Circuit Boards under Biased HAST