Chao Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Chao Zhang has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Tianhao Yu
Department of Civil Engineering Sichuan University Chengdu China
5 shared publications Weiyuan Huang
5 shared publicationsZhenqin Huang
5 shared publicationsXuesong Deng
School of Civil Engineering Guangzhou University Guangzhou China
4 shared publicationsQiming Chen
Guangzhou University
3 shared publicationsZhicheng Liang
School of Civil Engineering Guangzhou University Guangzhou China
3 shared publications
Latest Publications
- 26 July 2025
- Published by Elsevier in Engineering Structures
- Vol. 343
Optimization design and performance evaluation of two-level friction dampers for seismic mitigation
- 26 July 2025
- Published by Elsevier in Engineering Structures
- Vol. 343
Optimization design and performance evaluation of two-level friction dampers for seismic mitigation
- 26 June 2025
- Published by Springer Nature
- p. 148-161
Seismic Mitigation Performance Evaluation of Improved Rotational Two-Level Friction Damper
- 26 June 2025
- Published by Springer Nature
- p. 148-161
Seismic Mitigation Performance Evaluation of Improved Rotational Two-Level Friction Damper
- 17 June 2025
- Published by Springer Nature
- p. 854-863
A Seismic Analysis Approach for Subway Stations Considering Rainfall Infiltration
- 17 June 2025
- Published by Springer Nature
- p. 854-863
A Seismic Analysis Approach for Subway Stations Considering Rainfall Infiltration
- 16 May 2025
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 54 (11) , 2671-2689
A Novel Self‐Centering Mechanical Model for Shape Memory Alloys Incorporating Cyclic Degradation
Shape memory alloys (SMAs) have gained increased attention in earthquake engineering due to their exceptional self‐centering and energy dissipation capabilities. However, the cyclic degradation behavior of SMA has a significant impact on their mechanical properties, which is often inadequately addressed in existing mechanical models. This paper proposes a phenomenological mechanical model that comprehensively considers the cyclic degradation effects of SMA. The proposed model accounts for key aspects including stiffness degradation, strength degradation, residual strain accumulation, as well as energy dissipation during the hardening stage. The theoretical framework and hysteresis rules governing the mechanical model are first presented, followed by its implementation in OpenSees software as a new material model. Subsequently, experimental data from four different loading protocols are used to validate the feasibility and accuracy of the proposed mechanical model. The comparative analysis demonstrates that the mechanical model proposed and implemented in OpenSees can effectively simulate the hysteretic behavior and various degradation responses of SMA materials under different loading protocols. Furthermore, two different SMA‐braced steel frame structures, one considering cyclic degradation and the other neglecting it, are analyzed and compared to assess the impact of SMA cyclic degradation on the seismic performance of the structures. The results show that SMA cyclic degradation significantly impacts both the maximum transient and residual inter‐story drift ratios (RIDRs) of the structure. Notably, structures that properly account for SMA cyclic degradation exhibit a remarkably higher median RIDR, along with greater variability. This also confirms that the proposed mechanical model can be effectively implemented in OpenSees for practical applications, enabling a more accurate and reasonable assessment of structural responses during seismic events.
- 16 May 2025
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 54 (11) , 2671-2689
A Novel Self‐Centering Mechanical Model for Shape Memory Alloys Incorporating Cyclic Degradation
Shape memory alloys (SMAs) have gained increased attention in earthquake engineering due to their exceptional self‐centering and energy dissipation capabilities. However, the cyclic degradation behavior of SMA has a significant impact on their mechanical properties, which is often inadequately addressed in existing mechanical models. This paper proposes a phenomenological mechanical model that comprehensively considers the cyclic degradation effects of SMA. The proposed model accounts for key aspects including stiffness degradation, strength degradation, residual strain accumulation, as well as energy dissipation during the hardening stage. The theoretical framework and hysteresis rules governing the mechanical model are first presented, followed by its implementation in OpenSees software as a new material model. Subsequently, experimental data from four different loading protocols are used to validate the feasibility and accuracy of the proposed mechanical model. The comparative analysis demonstrates that the mechanical model proposed and implemented in OpenSees can effectively simulate the hysteretic behavior and various degradation responses of SMA materials under different loading protocols. Furthermore, two different SMA‐braced steel frame structures, one considering cyclic degradation and the other neglecting it, are analyzed and compared to assess the impact of SMA cyclic degradation on the seismic performance of the structures. The results show that SMA cyclic degradation significantly impacts both the maximum transient and residual inter‐story drift ratios (RIDRs) of the structure. Notably, structures that properly account for SMA cyclic degradation exhibit a remarkably higher median RIDR, along with greater variability. This also confirms that the proposed mechanical model can be effectively implemented in OpenSees for practical applications, enabling a more accurate and reasonable assessment of structural responses during seismic events.
- 13 March 2025
- Published by Elsevier in Engineering Structures
- Vol. 332
Development and full-scale cycling test of a novel rotational friction damper with response-amplification mechanism
- 13 March 2025
- Published by Elsevier in Engineering Structures
- Vol. 332
Development and full-scale cycling test of a novel rotational friction damper with response-amplification mechanism
- 22 March 2024
- Published by Elsevier in Structures
- Vol. 62
Numerical investigation of three-dimensional isolator and mitigation for single-layer lattice shell structure
- 22 March 2024
- Published by Elsevier in Structures
- Vol. 62
Numerical investigation of three-dimensional isolator and mitigation for single-layer lattice shell structure
- 13 March 2024
- Published by Elsevier in Structures
- Vol. 62
Study on mechanical properties of shotcrete lattice girder in a tunnel considering the excavation effect at early-age
- 13 March 2024
- Published by Elsevier in Structures
- Vol. 62
Study on mechanical properties of shotcrete lattice girder in a tunnel considering the excavation effect at early-age
- 4 March 2024
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 53 (6) , 2162-2184
Experimental and analytical studies of infill wall with sliding joints considering a door opening
Semi‐rigid steel frame stands out due to its remarkable deformation capability under seismic loading, while the introduction of partitioned walls would disturb the expected seismic behavior of the infilled steel frames. Furthermore, the presence of door openings might exacerbate these negative effects. To mitigate the detrimental multiple‐diagonal strut effect of traditional infill walls around the door opening, an innovative low‐damage wall panels system: prefabricated infill wall panels with a door opening and sliding joints are presented for semi‐rigid steel frames. For testifying the effectiveness of the proposed structure, a quasi‐static test was carried out on three half‐scaled steel frames: a bare frame, a frame infilled with conventional wall panels with a door opening, and a frame infilled with the novel wall panel system with a door opening. Experimental results reveal that the developed innovative wall panels with a door opening could avoid unfavorable crack developments and opening deformation around the door area. It is mainly attributed to the releasement of the adverse multiple‐diagonal strut mechanism of traditional wall panels with door openings. Thus, the presented infilled frame showcases seismic performance similar to the bare steel frame, while having a higher energy dissipation capacity. Moreover, the developed analytical prediction method based on the superposition principle could accurately estimate the lateral load‐carrying capacity of the structures. Due to negligible deformation of the both bottom infill wall panel and the door opening, the innovative infill wall only contributes about 10% lateral load‐carrying capability to the infilled frame.
- 4 March 2024
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 53 (6) , 2162-2184
Experimental and analytical studies of infill wall with sliding joints considering a door opening
Semi‐rigid steel frame stands out due to its remarkable deformation capability under seismic loading, while the introduction of partitioned walls would disturb the expected seismic behavior of the infilled steel frames. Furthermore, the presence of door openings might exacerbate these negative effects. To mitigate the detrimental multiple‐diagonal strut effect of traditional infill walls around the door opening, an innovative low‐damage wall panels system: prefabricated infill wall panels with a door opening and sliding joints are presented for semi‐rigid steel frames. For testifying the effectiveness of the proposed structure, a quasi‐static test was carried out on three half‐scaled steel frames: a bare frame, a frame infilled with conventional wall panels with a door opening, and a frame infilled with the novel wall panel system with a door opening. Experimental results reveal that the developed innovative wall panels with a door opening could avoid unfavorable crack developments and opening deformation around the door area. It is mainly attributed to the releasement of the adverse multiple‐diagonal strut mechanism of traditional wall panels with door openings. Thus, the presented infilled frame showcases seismic performance similar to the bare steel frame, while having a higher energy dissipation capacity. Moreover, the developed analytical prediction method based on the superposition principle could accurately estimate the lateral load‐carrying capacity of the structures. Due to negligible deformation of the both bottom infill wall panel and the door opening, the innovative infill wall only contributes about 10% lateral load‐carrying capability to the infilled frame.
- 24 November 2023
- Published by Springer Nature in Bulletin of Earthquake Engineering
- Vol. 22 (3) , 1275-1307
Influence of window opening on cyclic behavior of precast infill wall with sliding joints
- 24 November 2023
- Published by Springer Nature in Bulletin of Earthquake Engineering
- Vol. 22 (3) , 1275-1307
Influence of window opening on cyclic behavior of precast infill wall with sliding joints