Mrinal Kanti Adak
Research Subjects
Research Interests
Mrinal Kanti Adak has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
- Debasis Dhak
Nanomaterials Research Lab, Department of Chemistry, Sidho-Kanho-Birsha University, Purulia, 723104, India
10 shared publications Arnab Mukherjee
8 shared publicationsDebasis Dhak
8 shared publicationsJulekha Khatun
7 shared publicationsPrasanta Dhak
7 shared publicationsAnirban Chowdhury
6 shared publications
Latest Publications
- 3 July 2026
- Published by Wiley in Advanced Sustainable Systems
- Vol. 10 (7)
Electrocatalytic Hydrazine Oxidation Modulated Through Transition‐Metal‐Substitution in Manganese Ferrites
Transition‐metal‐substituted manganese ferrites, Mn 0.95 M 0.05 Fe 2 O 4 (M: Co, Cu, and Zn), with a single‐phase cubic spinel structure, were synthesized using the combustion method. A high specific surface area (SA BET ) of 107 m 2 g −1 , along with pore size distribution (1.7 and 3.4 nm), was obtained for Mn 0.95 Zn 0.05 Fe 2 O 4 . All the synthesized ferrites exhibited significant hydrazine oxidation (HzOR) activity, and mass‑loading optimization revealed that their performance correlated with increasing SA BET in the following order: Mn 0.95 Zn 0.05 Fe 2 O 4 > Mn 0.95 Co 0.05 Fe 2 O 4 > Mn 0.95 Cu 0.05 Fe 2 O 4 > MnFe 2 O 4 . Importantly, Mn 0.95 Zn 0.05 Fe 2 O 4 demonstrated fast kinetics for HzOR with a low Tafel slope of 193 mV dec −1 and an electron transfer coefficient of 0.31. Further, it delivers a high current density of 115 mA cm −2 with mass loading of 0.96 mg for HzOR. The Mn 0.95 Zn 0.05 Fe 2 O 4 electrocatalyst exhibits the lowest onset potential of 0.65 V vs. RHE compared to other synthesized electrocatalysts. The double‐layer capacitance (C dl ) of 0.49 mF cm −2 corroborates a higher SA BET and porous microstructure of Mn 0.95 Zn 0.05 Fe 2 O 4 . DFT study reveals that the potential‑determining step (*N 2 H 3 → *N 2 H 2 ) has the lowest free‑energy barrier with a low limiting potential of 0.19 V for Mn 0.95 Zn 0.05 Fe 2 O 4 . The low barrier arises from Zn substitution, which moderates N 2 H 3 adsorption, stabilizes intermediates, and enhances HzOR activity.
- 3 July 2026
- Published by Wiley in Advanced Sustainable Systems
- Vol. 10 (7)
Electrocatalytic Hydrazine Oxidation Modulated Through Transition‐Metal‐Substitution in Manganese Ferrites
Transition‐metal‐substituted manganese ferrites, Mn 0.95 M 0.05 Fe 2 O 4 (M: Co, Cu, and Zn), with a single‐phase cubic spinel structure, were synthesized using the combustion method. A high specific surface area (SA BET ) of 107 m 2 g −1 , along with pore size distribution (1.7 and 3.4 nm), was obtained for Mn 0.95 Zn 0.05 Fe 2 O 4 . All the synthesized ferrites exhibited significant hydrazine oxidation (HzOR) activity, and mass‑loading optimization revealed that their performance correlated with increasing SA BET in the following order: Mn 0.95 Zn 0.05 Fe 2 O 4 > Mn 0.95 Co 0.05 Fe 2 O 4 > Mn 0.95 Cu 0.05 Fe 2 O 4 > MnFe 2 O 4 . Importantly, Mn 0.95 Zn 0.05 Fe 2 O 4 demonstrated fast kinetics for HzOR with a low Tafel slope of 193 mV dec −1 and an electron transfer coefficient of 0.31. Further, it delivers a high current density of 115 mA cm −2 with mass loading of 0.96 mg for HzOR. The Mn 0.95 Zn 0.05 Fe 2 O 4 electrocatalyst exhibits the lowest onset potential of 0.65 V vs. RHE compared to other synthesized electrocatalysts. The double‐layer capacitance (C dl ) of 0.49 mF cm −2 corroborates a higher SA BET and porous microstructure of Mn 0.95 Zn 0.05 Fe 2 O 4 . DFT study reveals that the potential‑determining step (*N 2 H 3 → *N 2 H 2 ) has the lowest free‑energy barrier with a low limiting potential of 0.19 V for Mn 0.95 Zn 0.05 Fe 2 O 4 . The low barrier arises from Zn substitution, which moderates N 2 H 3 adsorption, stabilizes intermediates, and enhances HzOR activity.
- 19 June 2026
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 40 (26) , 14152-14162
Triazine-Functionalized Cellulose Fibers as Electrocatalysts for Nitrate-to-Ammonia Conversion
- 19 June 2026
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 40 (26) , 14152-14162
Triazine-Functionalized Cellulose Fibers as Electrocatalysts for Nitrate-to-Ammonia Conversion
- 29 March 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (14) , 9898-9909
Nickel Single Atoms Embedded in 2D Stacked Polytriazine as an Electrocatalyst for Oxygen Evolution Reaction
Synthesis of single-atom catalysts (SACs) remains challenging, particularly to achieve high metal loading while preserving atomic dispersion. Here, we report a low-temperature synthesis strategy that effectively stabilizes individual single metal atoms on a 2D stacked polytriazine framework (g-C3N4) with a high metal loading. In this context, a microwave-assisted method was utilized for the synthesis of Ni-based SACs embedded in 2D stacked polytriazine at 140 °C for 30 min. A thorough analysis of XRD, XPS, and XAS reveals the co-ordination of Ni with N in the polytriazine structure, which not only facilitates stacking of polytriazine sheets but also helps in the stabilization of Ni single atoms. Both density functional theory (DFT) calculation and EXAFS curve fittings reveal that Ni2+ is present in-plane being coordinated with four N atoms and between two layers of the polytriazine framework in co-ordination with six N atoms. The resulting SAC achieves a Ni metal loading of up to 2.8 wt %, with a specific surface area (SABET) of 418 m2 g–1. This system exhibits not only Ni single atomic active sites but also strong Ni–N co-ordination, which could be effective for electrochemical oxygen evolution reaction (OER). Further, the SAC demonstrates high electrocatalytic performance toward OER, with a low overpotential of 330 mV at 10 mA cm–2 and a low Tafel slope of 84 mV dec–1 in 1 M KOH. The combined effect of both Ni single atomic active sites and stacked polytriazine leads to a high turnover frequency (TOF) of 0.05 s–1 and stability up to 50 h without any appreciable change in the microstructure.
- 29 March 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (14) , 9898-9909
Nickel Single Atoms Embedded in 2D Stacked Polytriazine as an Electrocatalyst for Oxygen Evolution Reaction
Synthesis of single-atom catalysts (SACs) remains challenging, particularly to achieve high metal loading while preserving atomic dispersion. Here, we report a low-temperature synthesis strategy that effectively stabilizes individual single metal atoms on a 2D stacked polytriazine framework (g-C3N4) with a high metal loading. In this context, a microwave-assisted method was utilized for the synthesis of Ni-based SACs embedded in 2D stacked polytriazine at 140 °C for 30 min. A thorough analysis of XRD, XPS, and XAS reveals the co-ordination of Ni with N in the polytriazine structure, which not only facilitates stacking of polytriazine sheets but also helps in the stabilization of Ni single atoms. Both density functional theory (DFT) calculation and EXAFS curve fittings reveal that Ni2+ is present in-plane being coordinated with four N atoms and between two layers of the polytriazine framework in co-ordination with six N atoms. The resulting SAC achieves a Ni metal loading of up to 2.8 wt %, with a specific surface area (SABET) of 418 m2 g–1. This system exhibits not only Ni single atomic active sites but also strong Ni–N co-ordination, which could be effective for electrochemical oxygen evolution reaction (OER). Further, the SAC demonstrates high electrocatalytic performance toward OER, with a low overpotential of 330 mV at 10 mA cm–2 and a low Tafel slope of 84 mV dec–1 in 1 M KOH. The combined effect of both Ni single atomic active sites and stacked polytriazine leads to a high turnover frequency (TOF) of 0.05 s–1 and stability up to 50 h without any appreciable change in the microstructure.
- 20 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (7) , 3806-3817
Synergistic Interactions in Nanostructured CuNi 2 Bimetallic Alloy for Superior Hydrogen Evolution Reaction Kinetics and Stability
- 20 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (7) , 3806-3817
Synergistic Interactions in Nanostructured CuNi 2 Bimetallic Alloy for Superior Hydrogen Evolution Reaction Kinetics and Stability
- 17 December 2025
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (1) , 497-508
Electrochemical Synthesis of Urea and Ammonia by Boron- and Nitrogen-Enriched Nanoporous Polymeric Material as a Metal-Free Electrocatalyst
- 17 December 2025
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (1) , 497-508
Electrochemical Synthesis of Urea and Ammonia by Boron- and Nitrogen-Enriched Nanoporous Polymeric Material as a Metal-Free Electrocatalyst
- 8 October 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (42) , 20548-20557
S- and N-Enriched Cyclophosphazene- and Triazine-Based Inorganic–Organic Hybrid Nanoporous Electrocatalyst for Nitrate Upcycling to Ammonia
- 8 October 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (42) , 20548-20557
S- and N-Enriched Cyclophosphazene- and Triazine-Based Inorganic–Organic Hybrid Nanoporous Electrocatalyst for Nitrate Upcycling to Ammonia
- 9 September 2025
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 25 (19) , 8252-8270
Discovery of Binary and Ternary Colored Crystalline Phases in Atovaquone: From Stoichiomorphs to Solvates
- 9 September 2025
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 25 (19) , 8252-8270
Discovery of Binary and Ternary Colored Crystalline Phases in Atovaquone: From Stoichiomorphs to Solvates
- 16 April 2024
- Published by Taylor & Francis in Experimental Heat Transfer
- Vol. 38 (4) , 344-361
SiO 2 @Cu core-shell nanostructure impregnation on phase changed material (paraffin) for thermal energy storage
In the era of industrialization, the demand for global energy has increased significantly for fast technological and positive economic growth. Most energy is consumed from fossil fuels, which are s...
- 16 April 2024
- Published by Taylor & Francis in Experimental Heat Transfer
- Vol. 38 (4) , 344-361
SiO 2 @Cu core-shell nanostructure impregnation on phase changed material (paraffin) for thermal energy storage
In the era of industrialization, the demand for global energy has increased significantly for fast technological and positive economic growth. Most energy is consumed from fossil fuels, which are s...
- 5 February 2023
- Published by Springer Nature
- p. 69-82
Nano-filtration Application in the Textile Industry for Wastewater Treatment
- 5 February 2023
- Published by Springer Nature
- p. 69-82
Nano-filtration Application in the Textile Industry for Wastewater Treatment